Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 8f440bd40ef2000214cfa8f3eaee7f7fda16d069 / . / drivers / phy / Kconfig
blob: cf4d5908d7378c5864b863cfeee99ffffe6faa20 [file] [log] [blame]
Jean-Jacques Hiblot48447782017-04-24 11:51:27 +0200[diff] [blame]1
2menu "PHY Subsystem"
3
4config PHY
5 bool "PHY Core"
6 depends on DM
7 help
8 PHY support.
9
10 This framework is designed to provide a generic interface for PHY
11 devices. PHY devices are dedicated hardware that handle the physical
12 layer of the protocols in the OSI model.
13 PHYs are commonly used for high speed interfaces such as Serial-ATA
14 or PCI express.
15 The API provides functions to initialize/deinitialize the
16 PHY, power on/off the PHY, and reset the PHY. It's meant to be as
17 compatible as possible with the equivalent framework found in the
18 linux kernel.
19
20config SPL_PHY
21 bool "PHY Core in SPL"
Adam Fordac4d80e2019-08-24 13:50:34 -0500[diff] [blame]22 depends on DM && SPL
Jean-Jacques Hiblot48447782017-04-24 11:51:27 +0200[diff] [blame]23 help
24 PHY support in SPL.
25
26 This framework is designed to provide a generic interface for PHY
27 devices. PHY devices are dedicated hardware that handle the physical
28 layer of the protocols (https://en.wikipedia.org/wiki/OSI_model).
29 PHYs are commonly used for high speed interfaces such as Serial-ATA
30 or PCI express.
31 The API provides functions to initialize/deinitialize the
32 PHY, power on/off the PHY, and reset the PHY. It's meant to be as
33 compatible as possible with the equivalent framework found in the
34 linux kernel.
35
Jean-Jacques Hiblot7e9db022017-04-24 11:51:28 +0200[diff] [blame]36config PHY_SANDBOX
37 bool "Sandbox PHY support"
38 depends on SANDBOX
39 depends on PHY
40 help
41 This select a dummy sandbox PHY driver. It used only to implement
42 the unit tests for the phy framework
43
Jean-Jacques Hiblotc2da3e32017-07-24 15:18:15 +0200[diff] [blame]44config NOP_PHY
45 bool "NOP PHY driver"
46 depends on PHY
47 help
48 Support for a no-op PHY driver (stubbed PHY driver).
49
50 This is useful when a driver uses the PHY framework but no real PHY
51 hardware exists.
52
53config SPL_NOP_PHY
54 bool "NOP PHY driver in SPL"
55 depends on SPL_PHY
56 help
57 Support for a no-op PHY driver (stubbed PHY driver) in the SPL.
58
59 This is useful when a driver uses the PHY framework but no real PHY
60 hardware exists.
61
Neil Armstrong466fa152020-12-29 14:58:58 +0100[diff] [blame]62config MIPI_DPHY_HELPERS
63 bool "MIPI D-PHY support helpers"
64 help
65 Provides a number of helpers a core functions for MIPI D-PHY drivers.
66
Stephan Gerholdbd519112021-07-08 20:33:49 +0200[diff] [blame]67config AB8500_USB_PHY
68 bool "AB8500 USB PHY Driver"
69 depends on PHY && PMIC_AB8500
70 help
71 Support for the USB OTG PHY in ST-Ericsson AB8500.
72
Álvaro Fernández Rojas66871b72018-02-04 21:11:15 +0100[diff] [blame]73config BCM6318_USBH_PHY
74 bool "BCM6318 USBH PHY support"
75 depends on PHY && ARCH_BMIPS
76 select POWER_DOMAIN
77 help
78 Support for the Broadcom MIPS BCM6318 USBH PHY.
79
Álvaro Fernández Rojasb3c963a2018-02-04 11:18:24 +0100[diff] [blame]80config BCM6348_USBH_PHY
81 bool "BCM6348 USBH PHY support"
82 depends on PHY && ARCH_BMIPS
83 help
84 Support for the Broadcom MIPS BCM6348 USBH PHY.
85
Álvaro Fernández Rojas54a1fb62018-02-04 11:19:11 +0100[diff] [blame]86config BCM6358_USBH_PHY
87 bool "BCM6358 USBH PHY support"
88 depends on PHY && ARCH_BMIPS
89 help
90 Support for the Broadcom MIPS BCM6358 USBH PHY.
91
Álvaro Fernández Rojasdbb6baf2018-02-04 21:10:13 +0100[diff] [blame]92config BCM6368_USBH_PHY
93 bool "BCM6368 USBH PHY support"
94 depends on PHY && ARCH_BMIPS
95 help
96 Support for the Broadcom MIPS BCM6368 USBH PHY.
97
Srinath Mannam75687022020-04-02 16:08:12 +0530[diff] [blame]98config BCM_SR_PCIE_PHY
99 bool "Broadcom Stingray PCIe PHY driver"
100 depends on PHY
101 help
102 Enable this to support the Broadcom Stingray PCIe PHY
103 If unsure, say N.
104
Adam Ford9442e742019-07-10 13:59:09 -0500[diff] [blame]105config PHY_DA8XX_USB
106 tristate "TI DA8xx USB PHY Driver"
107 depends on PHY && ARCH_DAVINCI
108 help
109 Enable this to support the USB PHY on DA8xx SoCs.
110
Jean-Jacques Hiblot73e95eb2017-04-24 11:51:29 +0200[diff] [blame]111config PIPE3_PHY
112 bool "Support omap's PIPE3 PHY"
Jean-Jacques Hiblot5a3d1c62017-07-07 12:13:34 +0200[diff] [blame]113 depends on PHY && ARCH_OMAP2PLUS
Jean-Jacques Hiblot73e95eb2017-04-24 11:51:29 +0200[diff] [blame]114 help
115 Support for the omap PIPE3 phy for sata
116
117 This PHY is found on omap devices supporting SATA such as dra7, am57x
118 and omap5
119
120config SPL_PIPE3_PHY
121 bool "Support omap's PIPE3 PHY in SPL"
Jean-Jacques Hiblot5a3d1c62017-07-07 12:13:34 +0200[diff] [blame]122 depends on SPL_PHY && ARCH_OMAP2PLUS
Jean-Jacques Hiblot73e95eb2017-04-24 11:51:29 +0200[diff] [blame]123 help
124 Support for the omap PIPE3 phy for sata in SPL
125
126 This PHY is found on omap devices supporting SATA such as dra7, am57x
127 and omap5
128
Sekhar Nori114b0bc2019-08-01 19:12:58 +0530[diff] [blame]129config AM654_PHY
130 tristate "TI AM654 SERDES support"
131 depends on PHY && ARCH_K3
132 select REGMAP
133 select SYSCON
134 help
135 This option enables support for TI AM654 SerDes PHY used for
136 PCIe.
137
Patrice Chotard6b336512017-09-05 11:04:21 +0200[diff] [blame]138config STI_USB_PHY
139 bool "STMicroelectronics USB2 picoPHY driver for STiH407 family"
140 depends on PHY && ARCH_STI
141 help
142 This is the generic phy driver for the picoPHY ports
143 used by USB2 and USB3 Host controllers available on
144 STiH407 SoC families.
145
Marek Vasut484961c2018-08-05 15:22:19 +0200[diff] [blame]146config PHY_RCAR_GEN2
147 tristate "Renesas R-Car Gen2 USB PHY"
148 depends on PHY && RCAR_GEN2
149 help
150 Support for the Renesas R-Car Gen2 USB PHY. This driver operates the
151 PHY connected to USBHS module, PCI EHCI module and USB3.0 module and
152 allows configuring the module multiplexing.
153
Marek Vasutc31c4b12018-10-02 22:31:47 +0200[diff] [blame]154config PHY_RCAR_GEN3
155 tristate "Renesas R-Car Gen3 USB PHY"
156 depends on PHY && RCAR_GEN3 && CLK && DM_REGULATOR
157 default y if RCAR_GEN3
158 help
159 Support for the Renesas R-Car Gen3 USB PHY. This driver operates the
160 PHY connected to EHCI USB module and controls USB OTG operation.
161
Patrice Chotard226d87b2018-04-27 11:01:55 +0200[diff] [blame]162config PHY_STM32_USBPHYC
163 tristate "STMicroelectronics STM32 SoC USB HS PHY driver"
164 depends on PHY && ARCH_STM32MP
165 help
166 Enable this to support the High-Speed USB transceiver that is part of
167 STMicroelectronics STM32 SoCs.
168
169 This driver controls the entire USB PHY block: the USB PHY controller
170 (USBPHYC) and the two 8-bit wide UTMI+ interface. First interface is
171 used by an HS USB Host controller, and the second one is shared
172 between an HS USB OTG controller and an HS USB Host controller,
173 selected by an USB switch.
174
Beniamino Galvani86724a52019-08-18 15:42:54 +0200[diff] [blame]175config MESON_GXBB_USB_PHY
176 bool "Amlogic Meson GXBB USB PHY"
177 depends on PHY && ARCH_MESON && MESON_GXBB
178 imply REGMAP
179 help
180 This is the generic phy driver for the Amlogic Meson GXBB
181 USB2 PHY.
182
Neil Armstrong1cbd9ae2018-04-11 17:08:02 +0200[diff] [blame]183config MESON_GXL_USB_PHY
184 bool "Amlogic Meson GXL USB PHYs"
Neil Armstrongc90263c2020-09-10 10:48:16 +0200[diff] [blame]185 depends on PHY && ARCH_MESON && (MESON_GXL || MESON_GXM || MESON_AXG)
Neil Armstrong1cbd9ae2018-04-11 17:08:02 +0200[diff] [blame]186 imply REGMAP
187 help
188 This is the generic phy driver for the Amlogic Meson GXL
189 USB2 and USB3 PHYS.
190
Neil Armstrong5fe837d2019-02-19 15:17:29 +0100[diff] [blame]191config MESON_G12A_USB_PHY
192 bool "Amlogic Meson G12A USB PHYs"
193 depends on PHY && ARCH_MESON && MESON_G12A
194 imply REGMAP
195 help
196 This is the generic phy driver for the Amlogic Meson G12A
197 USB2 and USB3 PHYS.
198
Neil Armstrong90f9ecd2020-12-29 14:59:00 +0100[diff] [blame]199config MESON_AXG_MIPI_DPHY
200 bool "Amlogic Meson AXG MIPI D-PHY"
201 depends on PHY && ARCH_MESON && MESON_AXG
202 select MIPI_DPHY_HELPERS
203 imply REGMAP
204 help
205 This is the generic phy driver for the Amlogic Meson AXG
206 MIPI D-PHY.
207
Neil Armstrongd8d11692020-12-29 14:59:01 +0100[diff] [blame]208config MESON_AXG_MIPI_PCIE_ANALOG_PHY
209 bool "Amlogic Meson AXG MIPI PCIe Analog PHY"
210 depends on PHY && ARCH_MESON && MESON_AXG
211 select MIPI_DPHY_HELPERS
212 imply REGMAP
213 help
214 This is the generic phy driver for the Amlogic Meson AXG
215 MIPI PCIe Analog PHY.
216
Jean-Jacques Hiblot45305712018-11-29 10:57:39 +0100[diff] [blame]217config OMAP_USB2_PHY
218 bool "Support OMAP's USB2 PHY"
219 depends on PHY
220 depends on SYSCON
221 help
222 Support for the OMAP's USB2 PHY.
223
224 This PHY is found on OMAP devices supporting USB2.
225
Jean-Jacques Hiblota5bb6712018-12-04 11:12:59 +0100[diff] [blame]226
227config KEYSTONE_USB_PHY
228 bool "Support TI Keystone USB PHY"
229 depends on PHY
230 depends on ARCH_KEYSTONE
231 help
232 Support for the USB PHY found on some Keystone (k2) processors
233
234 This PHY is found on some Keystone (K2) devices supporting USB.
235
developer19cf5772020-11-12 16:36:48 +0800[diff] [blame]236config MT7620_USB_PHY
237 bool "MediaTek MT7620 USB PHY support"
238 depends on PHY
239 depends on SOC_MT7620
240 help
241 Support the intergated USB PHY in MediaTek MT7620 SoC
242
Stefan Roese67e02df2019-04-05 13:44:43 +0200[diff] [blame]243config MT76X8_USB_PHY
244 bool "MediaTek MT76x8 (7628/88) USB PHY support"
245 depends on PHY
developer065e7dd2019-09-25 17:45:31 +0800[diff] [blame]246 depends on SOC_MT7628
Stefan Roese67e02df2019-04-05 13:44:43 +0200[diff] [blame]247 help
248 Support the USB PHY in MT76x8 SoCs
249
250 This PHY is found on MT76x8 devices supporting USB.
251
developer7b27b8d2019-08-22 12:26:50 +0200[diff] [blame]252config PHY_MTK_TPHY
253 bool "MediaTek T-PHY Driver"
254 depends on PHY
developerf37e4f22022-05-20 11:23:01 +0800[diff] [blame]255 depends on ARCH_MEDIATEK || SOC_MT7621
developer7b27b8d2019-08-22 12:26:50 +0200[diff] [blame]256 help
257 MediaTek T-PHY driver supports usb2.0, usb3.0 ports, PCIe and
258 SATA, and meanwhile supports two version T-PHY which have
259 different banks layout, the T-PHY with shared banks between
260 multi-ports is first version, otherwise is second veriosn,
261 so you can easily distinguish them by banks layout.
262
Jim Liu9a215e82022-06-21 17:03:38 +0800[diff] [blame]263config PHY_NPCM_USB
264 bool "Nuvoton NPCM USB PHY support"
265 depends on PHY
266 depends on ARCH_NPCM
267 help
268 Support the USB PHY in NPCM SoCs
269
Ye Lifde01d92021-02-21 08:26:21 -0800[diff] [blame]270config PHY_IMX8MQ_USB
Marek Vasutc55fbc42022-04-01 03:18:31 +0200[diff] [blame]271 bool "NXP i.MX8MQ/i.MX8MP USB PHY Driver"
Ye Lifde01d92021-02-21 08:26:21 -0800[diff] [blame]272 depends on PHY
Marek Vasutc55fbc42022-04-01 03:18:31 +0200[diff] [blame]273 depends on IMX8MQ || IMX8MP
Ye Lifde01d92021-02-21 08:26:21 -0800[diff] [blame]274 help
Marek Vasutc55fbc42022-04-01 03:18:31 +0200[diff] [blame]275 Support the USB3.0 PHY in NXP i.MX8MQ or i.MX8MP SoC
Ye Lifde01d92021-02-21 08:26:21 -0800[diff] [blame]276
Michal Simek0be35ab2022-01-06 09:49:41 +0100[diff] [blame]277config PHY_XILINX_ZYNQMP
278 tristate "Xilinx ZynqMP PHY driver"
279 depends on PHY && ARCH_ZYNQMP
280 help
281 Enable this to support ZynqMP High Speed Gigabit Transceiver
282 that is part of ZynqMP SoC.
283
Jagan Teki70e882f2020-05-26 11:33:44 +0800[diff] [blame]284source "drivers/phy/rockchip/Kconfig"
Alan Douglasfda76da2021-07-21 21:28:36 +0530[diff] [blame]285source "drivers/phy/cadence/Kconfig"
Jean-Jacques Hiblot065788e2021-07-21 21:28:38 +0530[diff] [blame]286source "drivers/phy/ti/Kconfig"
Sumit Garg302d5a42022-08-04 19:57:09 +0530[diff] [blame]287source "drivers/phy/qcom/Kconfig"
Alan Douglasfda76da2021-07-21 21:28:36 +0530[diff] [blame]288
Jean-Jacques Hiblot48447782017-04-24 11:51:27 +0200[diff] [blame]289endmenu