Stefan Roese | ae6223d | 2015-01-19 11:33:40 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) Marvell International Ltd. and its affiliates |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0 |
| 5 | */ |
| 6 | |
| 7 | #include <common.h> |
| 8 | #include <i2c.h> |
| 9 | #include <spl.h> |
| 10 | #include <asm/io.h> |
| 11 | #include <asm/arch/cpu.h> |
| 12 | #include <asm/arch/soc.h> |
| 13 | |
| 14 | #include "ddr3_hw_training.h" |
| 15 | |
| 16 | /* |
| 17 | * Debug |
| 18 | */ |
| 19 | #define DEBUG_PBS_FULL_C(s, d, l) \ |
| 20 | DEBUG_PBS_FULL_S(s); DEBUG_PBS_FULL_D(d, l); DEBUG_PBS_FULL_S("\n") |
| 21 | #define DEBUG_PBS_C(s, d, l) \ |
| 22 | DEBUG_PBS_S(s); DEBUG_PBS_D(d, l); DEBUG_PBS_S("\n") |
| 23 | |
| 24 | #ifdef MV_DEBUG_PBS |
| 25 | #define DEBUG_PBS_S(s) puts(s) |
| 26 | #define DEBUG_PBS_D(d, l) printf("%x", d) |
| 27 | #else |
| 28 | #define DEBUG_PBS_S(s) |
| 29 | #define DEBUG_PBS_D(d, l) |
| 30 | #endif |
| 31 | |
| 32 | #ifdef MV_DEBUG_FULL_PBS |
| 33 | #define DEBUG_PBS_FULL_S(s) puts(s) |
| 34 | #define DEBUG_PBS_FULL_D(d, l) printf("%x", d) |
| 35 | #else |
| 36 | #define DEBUG_PBS_FULL_S(s) |
| 37 | #define DEBUG_PBS_FULL_D(d, l) |
| 38 | #endif |
| 39 | |
| 40 | #if defined(MV88F78X60) || defined(MV88F672X) |
| 41 | |
| 42 | /* Temp array for skew data storage */ |
| 43 | static u32 skew_array[(MAX_PUP_NUM) * DQ_NUM] = { 0 }; |
| 44 | |
| 45 | /* PBS locked dq (per pup) */ |
| 46 | extern u32 pbs_locked_dq[MAX_PUP_NUM][DQ_NUM]; |
| 47 | extern u32 pbs_locked_dm[MAX_PUP_NUM]; |
| 48 | extern u32 pbs_locked_value[MAX_PUP_NUM][DQ_NUM]; |
| 49 | |
| 50 | #if defined(MV88F672X) |
| 51 | extern u32 pbs_pattern[2][LEN_16BIT_PBS_PATTERN]; |
| 52 | extern u32 pbs_pattern_32b[2][LEN_PBS_PATTERN]; |
| 53 | #else |
| 54 | extern u32 pbs_pattern_32b[2][LEN_PBS_PATTERN]; |
| 55 | extern u32 pbs_pattern_64b[2][LEN_PBS_PATTERN]; |
| 56 | #endif |
| 57 | |
| 58 | extern u32 pbs_dq_mapping[PUP_NUM_64BIT + 1][DQ_NUM]; |
| 59 | |
| 60 | static int ddr3_tx_shift_dqs_adll_step_before_fail(MV_DRAM_INFO *dram_info, |
| 61 | u32 cur_pup, u32 pbs_pattern_idx, u32 ecc); |
| 62 | static int ddr3_rx_shift_dqs_to_first_fail(MV_DRAM_INFO *dram_info, u32 cur_pup, |
| 63 | u32 pbs_pattern_idx, u32 ecc); |
| 64 | static int ddr3_pbs_per_bit(MV_DRAM_INFO *dram_info, int *start_over, int is_tx, |
| 65 | u32 *pcur_pup, u32 pbs_pattern_idx, u32 ecc); |
| 66 | static int ddr3_set_pbs_results(MV_DRAM_INFO *dram_info, int is_tx); |
| 67 | static void ddr3_pbs_write_pup_dqs_reg(u32 cs, u32 pup, u32 dqs_delay); |
| 68 | |
| 69 | /* |
| 70 | * Name: ddr3_pbs_tx |
| 71 | * Desc: Execute the PBS TX phase. |
| 72 | * Args: dram_info ddr3 training information struct |
| 73 | * Notes: |
| 74 | * Returns: MV_OK if success, other error code if fail. |
| 75 | */ |
| 76 | int ddr3_pbs_tx(MV_DRAM_INFO *dram_info) |
| 77 | { |
| 78 | /* Array of Deskew results */ |
| 79 | |
| 80 | /* |
| 81 | * Array to hold the total sum of skew from all iterations |
| 82 | * (for average purpose) |
| 83 | */ |
| 84 | u32 skew_sum_array[MAX_PUP_NUM][DQ_NUM] = { {0} }; |
| 85 | |
| 86 | /* |
| 87 | * Array to hold the total average skew from both patterns |
| 88 | * (for average purpose) |
| 89 | */ |
| 90 | u32 pattern_skew_array[MAX_PUP_NUM][DQ_NUM] = { {0} }; |
| 91 | |
| 92 | u32 pbs_rep_time = 0; /* counts number of loop in case of fail */ |
| 93 | /* bit array for unlock pups - used to repeat on the RX operation */ |
| 94 | u32 cur_pup; |
| 95 | u32 max_pup; |
| 96 | u32 pbs_retry; |
| 97 | u32 pup, dq, pups, cur_max_pup, valid_pup, reg; |
| 98 | u32 pattern_idx; |
| 99 | u32 ecc; |
| 100 | /* indicates whether we need to start the loop again */ |
| 101 | int start_over; |
| 102 | |
| 103 | DEBUG_PBS_S("DDR3 - PBS TX - Starting PBS TX procedure\n"); |
| 104 | |
| 105 | pups = dram_info->num_of_total_pups; |
| 106 | max_pup = dram_info->num_of_total_pups; |
| 107 | |
| 108 | /* Enable SW override */ |
| 109 | reg = reg_read(REG_DRAM_TRAINING_2_ADDR) | |
| 110 | (1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS); |
| 111 | /* [0] = 1 - Enable SW override */ |
| 112 | /* 0x15B8 - Training SW 2 Register */ |
| 113 | reg_write(REG_DRAM_TRAINING_2_ADDR, reg); |
| 114 | DEBUG_PBS_S("DDR3 - PBS RX - SW Override Enabled\n"); |
| 115 | |
| 116 | reg = 1 << REG_DRAM_TRAINING_AUTO_OFFS; |
| 117 | reg_write(REG_DRAM_TRAINING_ADDR, reg); /* 0x15B0 - Training Register */ |
| 118 | |
| 119 | /* Running twice for 2 different patterns. each patterns - 3 times */ |
| 120 | for (pattern_idx = 0; pattern_idx < COUNT_PBS_PATTERN; pattern_idx++) { |
| 121 | DEBUG_PBS_C("DDR3 - PBS TX - Working with pattern - ", |
| 122 | pattern_idx, 1); |
| 123 | |
| 124 | /* Reset sum array */ |
| 125 | for (pup = 0; pup < pups; pup++) { |
| 126 | for (dq = 0; dq < DQ_NUM; dq++) |
| 127 | skew_sum_array[pup][dq] = 0; |
| 128 | } |
| 129 | |
| 130 | /* |
| 131 | * Perform PBS several of times (3 for each pattern). |
| 132 | * At the end, we'll use the average |
| 133 | */ |
| 134 | /* If there is ECC, do each PBS again with mux change */ |
| 135 | for (pbs_retry = 0; pbs_retry < COUNT_PBS_REPEAT; pbs_retry++) { |
| 136 | for (ecc = 0; ecc < (dram_info->ecc_ena + 1); ecc++) { |
| 137 | |
| 138 | /* |
| 139 | * This parameter stores the current PUP |
| 140 | * num - ecc mode dependent - 4-8 / 1 pups |
| 141 | */ |
| 142 | cur_max_pup = (1 - ecc) * |
| 143 | dram_info->num_of_std_pups + ecc; |
| 144 | |
| 145 | if (ecc) { |
| 146 | /* Only 1 pup in this case */ |
| 147 | valid_pup = 0x1; |
| 148 | } else if (cur_max_pup > 4) { |
| 149 | /* 64 bit - 8 pups */ |
| 150 | valid_pup = 0xFF; |
| 151 | } else if (cur_max_pup == 4) { |
| 152 | /* 32 bit - 4 pups */ |
| 153 | valid_pup = 0xF; |
| 154 | } else { |
| 155 | /* 16 bit - 2 pups */ |
| 156 | valid_pup = 0x3; |
| 157 | } |
| 158 | |
| 159 | /* ECC Support - Switch ECC Mux on ecc=1 */ |
| 160 | reg = reg_read(REG_DRAM_TRAINING_2_ADDR) & |
| 161 | ~(1 << REG_DRAM_TRAINING_2_ECC_MUX_OFFS); |
| 162 | reg |= (dram_info->ecc_ena * ecc << |
| 163 | REG_DRAM_TRAINING_2_ECC_MUX_OFFS); |
| 164 | reg_write(REG_DRAM_TRAINING_2_ADDR, reg); |
| 165 | |
| 166 | if (ecc) |
| 167 | DEBUG_PBS_S("DDR3 - PBS Tx - ECC Mux Enabled\n"); |
| 168 | else |
| 169 | DEBUG_PBS_S("DDR3 - PBS Tx - ECC Mux Disabled\n"); |
| 170 | |
| 171 | /* Init iteration values */ |
| 172 | /* Clear the locked DQs */ |
| 173 | for (pup = 0; pup < cur_max_pup; pup++) { |
| 174 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 175 | pbs_locked_dq[ |
| 176 | pup + ecc * |
| 177 | (max_pup - 1)][dq] = |
| 178 | 0; |
| 179 | } |
| 180 | } |
| 181 | |
| 182 | pbs_rep_time = 0; |
| 183 | cur_pup = valid_pup; |
| 184 | start_over = 0; |
| 185 | |
| 186 | /* |
| 187 | * Run loop On current Pattern and current |
| 188 | * pattern iteration (just to cover the false |
| 189 | * fail problem) |
| 190 | */ |
| 191 | do { |
| 192 | DEBUG_PBS_S("DDR3 - PBS Tx - Pbs Rep Loop is "); |
| 193 | DEBUG_PBS_D(pbs_rep_time, 1); |
| 194 | DEBUG_PBS_S(", for Retry No."); |
| 195 | DEBUG_PBS_D(pbs_retry, 1); |
| 196 | DEBUG_PBS_S("\n"); |
| 197 | |
| 198 | /* Set all PBS values to MIN (0) */ |
| 199 | DEBUG_PBS_S("DDR3 - PBS Tx - Set all PBS values to MIN\n"); |
| 200 | |
| 201 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 202 | ddr3_write_pup_reg( |
| 203 | PUP_PBS_TX + |
| 204 | pbs_dq_mapping[pup * |
| 205 | (1 - ecc) + |
| 206 | ecc * ECC_PUP] |
| 207 | [dq], CS0, (1 - ecc) * |
| 208 | PUP_BC + ecc * ECC_PUP, 0, |
| 209 | 0); |
| 210 | } |
| 211 | |
| 212 | /* |
| 213 | * Shift DQ ADLL right, One step before |
| 214 | * fail |
| 215 | */ |
| 216 | DEBUG_PBS_S("DDR3 - PBS Tx - ADLL shift right one phase before fail\n"); |
| 217 | |
| 218 | if (MV_OK != ddr3_tx_shift_dqs_adll_step_before_fail |
| 219 | (dram_info, cur_pup, pattern_idx, |
| 220 | ecc)) |
| 221 | return MV_DDR3_TRAINING_ERR_PBS_ADLL_SHR_1PHASE; |
| 222 | |
| 223 | /* PBS For each bit */ |
| 224 | DEBUG_PBS_S("DDR3 - PBS Tx - perform PBS for each bit\n"); |
| 225 | |
| 226 | /* |
| 227 | * In this stage - start_over = 0 |
| 228 | */ |
| 229 | if (MV_OK != ddr3_pbs_per_bit( |
| 230 | dram_info, &start_over, 1, |
| 231 | &cur_pup, pattern_idx, ecc)) |
| 232 | return MV_DDR3_TRAINING_ERR_PBS_TX_PER_BIT; |
| 233 | |
| 234 | } while ((start_over == 1) && |
| 235 | (++pbs_rep_time < COUNT_PBS_STARTOVER)); |
| 236 | |
| 237 | if (pbs_rep_time == COUNT_PBS_STARTOVER && |
| 238 | start_over == 1) { |
| 239 | DEBUG_PBS_S("DDR3 - PBS Tx - FAIL - Adll reach max value\n"); |
| 240 | return MV_DDR3_TRAINING_ERR_PBS_TX_MAX_VAL; |
| 241 | } |
| 242 | |
| 243 | DEBUG_PBS_FULL_C("DDR3 - PBS TX - values for iteration - ", |
| 244 | pbs_retry, 1); |
| 245 | for (pup = 0; pup < cur_max_pup; pup++) { |
| 246 | /* |
| 247 | * To minimize delay elements, inc |
| 248 | * from pbs value the min pbs val |
| 249 | */ |
| 250 | DEBUG_PBS_S("DDR3 - PBS - PUP"); |
| 251 | DEBUG_PBS_D((pup + (ecc * ECC_PUP)), 1); |
| 252 | DEBUG_PBS_S(": "); |
| 253 | |
| 254 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 255 | /* Set skew value for all dq */ |
| 256 | /* |
| 257 | * Bit# Deskew <- Bit# Deskew - |
| 258 | * last / first failing bit |
| 259 | * Deskew For all bits (per PUP) |
| 260 | * (minimize delay elements) |
| 261 | */ |
| 262 | DEBUG_PBS_S("DQ"); |
| 263 | DEBUG_PBS_D(dq, 1); |
| 264 | DEBUG_PBS_S("-"); |
| 265 | DEBUG_PBS_D(skew_array |
| 266 | [((pup) * DQ_NUM) + |
| 267 | dq], 2); |
| 268 | DEBUG_PBS_S(", "); |
| 269 | } |
| 270 | DEBUG_PBS_S("\n"); |
| 271 | } |
| 272 | |
| 273 | /* |
| 274 | * Collect the results we got on this trial |
| 275 | * of PBS |
| 276 | */ |
| 277 | for (pup = 0; pup < cur_max_pup; pup++) { |
| 278 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 279 | skew_sum_array[pup + (ecc * (max_pup - 1))] |
| 280 | [dq] += skew_array |
| 281 | [((pup) * DQ_NUM) + dq]; |
| 282 | } |
| 283 | } |
| 284 | |
| 285 | /* ECC Support - Disable ECC MUX */ |
| 286 | reg = reg_read(REG_DRAM_TRAINING_2_ADDR) & |
| 287 | ~(1 << REG_DRAM_TRAINING_2_ECC_MUX_OFFS); |
| 288 | reg_write(REG_DRAM_TRAINING_2_ADDR, reg); |
| 289 | } |
| 290 | } |
| 291 | |
| 292 | DEBUG_PBS_C("DDR3 - PBS TX - values for current pattern - ", |
| 293 | pattern_idx, 1); |
| 294 | for (pup = 0; pup < max_pup; pup++) { |
| 295 | /* |
| 296 | * To minimize delay elements, inc from pbs value the |
| 297 | * min pbs val |
| 298 | */ |
| 299 | DEBUG_PBS_S("DDR3 - PBS - PUP"); |
| 300 | DEBUG_PBS_D(pup, 1); |
| 301 | DEBUG_PBS_S(": "); |
| 302 | |
| 303 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 304 | /* set skew value for all dq */ |
| 305 | /* Bit# Deskew <- Bit# Deskew - last / first failing bit Deskew For all bits (per PUP) (minimize delay elements) */ |
| 306 | DEBUG_PBS_S("DQ"); |
| 307 | DEBUG_PBS_D(dq, 1); |
| 308 | DEBUG_PBS_S("-"); |
| 309 | DEBUG_PBS_D(skew_sum_array[pup][dq] / |
| 310 | COUNT_PBS_REPEAT, 2); |
| 311 | DEBUG_PBS_S(", "); |
| 312 | } |
| 313 | DEBUG_PBS_S("\n"); |
| 314 | } |
| 315 | |
| 316 | /* |
| 317 | * Calculate the average skew for current pattern for each |
| 318 | * pup and each bit |
| 319 | */ |
| 320 | DEBUG_PBS_C("DDR3 - PBS TX - Average for pattern - ", |
| 321 | pattern_idx, 1); |
| 322 | |
| 323 | for (pup = 0; pup < max_pup; pup++) { |
| 324 | /* |
| 325 | * FOR ECC only :: found min and max value for current |
| 326 | * pattern skew array |
| 327 | */ |
| 328 | /* Loop for all dqs */ |
| 329 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 330 | pattern_skew_array[pup][dq] += |
| 331 | (skew_sum_array[pup][dq] / |
| 332 | COUNT_PBS_REPEAT); |
| 333 | } |
| 334 | } |
| 335 | } |
| 336 | |
| 337 | /* Calculate the average skew */ |
| 338 | for (pup = 0; pup < max_pup; pup++) { |
| 339 | for (dq = 0; dq < DQ_NUM; dq++) |
| 340 | skew_array[((pup) * DQ_NUM) + dq] = |
| 341 | pattern_skew_array[pup][dq] / COUNT_PBS_PATTERN; |
| 342 | } |
| 343 | |
| 344 | DEBUG_PBS_S("DDR3 - PBS TX - Average for all patterns:\n"); |
| 345 | for (pup = 0; pup < max_pup; pup++) { |
| 346 | /* |
| 347 | * To minimize delay elements, inc from pbs value the min |
| 348 | * pbs val |
| 349 | */ |
| 350 | DEBUG_PBS_S("DDR3 - PBS - PUP"); |
| 351 | DEBUG_PBS_D(pup, 1); |
| 352 | DEBUG_PBS_S(": "); |
| 353 | |
| 354 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 355 | /* Set skew value for all dq */ |
| 356 | /* |
| 357 | * Bit# Deskew <- Bit# Deskew - last / first |
| 358 | * failing bit Deskew For all bits (per PUP) |
| 359 | * (minimize delay elements) |
| 360 | */ |
| 361 | DEBUG_PBS_S("DQ"); |
| 362 | DEBUG_PBS_D(dq, 1); |
| 363 | DEBUG_PBS_S("-"); |
| 364 | DEBUG_PBS_D(skew_array[(pup * DQ_NUM) + dq], 2); |
| 365 | DEBUG_PBS_S(", "); |
| 366 | } |
| 367 | DEBUG_PBS_S("\n"); |
| 368 | } |
| 369 | |
| 370 | /* Return ADLL to default value */ |
| 371 | for (pup = 0; pup < max_pup; pup++) { |
| 372 | if (pup == (max_pup - 1) && dram_info->ecc_ena) |
| 373 | pup = ECC_PUP; |
| 374 | ddr3_pbs_write_pup_dqs_reg(CS0, pup, INIT_WL_DELAY); |
| 375 | } |
| 376 | |
| 377 | /* Set averaged PBS results */ |
| 378 | ddr3_set_pbs_results(dram_info, 1); |
| 379 | |
| 380 | /* Disable SW override - Must be in a different stage */ |
| 381 | /* [0]=0 - Enable SW override */ |
| 382 | reg = reg_read(REG_DRAM_TRAINING_2_ADDR); |
| 383 | reg &= ~(1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS); |
| 384 | /* 0x15B8 - Training SW 2 Register */ |
| 385 | reg_write(REG_DRAM_TRAINING_2_ADDR, reg); |
| 386 | |
| 387 | reg = reg_read(REG_DRAM_TRAINING_1_ADDR) | |
| 388 | (1 << REG_DRAM_TRAINING_1_TRNBPOINT_OFFS); |
| 389 | reg_write(REG_DRAM_TRAINING_1_ADDR, reg); |
| 390 | |
| 391 | DEBUG_PBS_S("DDR3 - PBS Tx - PBS TX ended successfuly\n"); |
| 392 | |
| 393 | return MV_OK; |
| 394 | } |
| 395 | |
| 396 | /* |
| 397 | * Name: ddr3_tx_shift_dqs_adll_step_before_fail |
| 398 | * Desc: Execute the Tx shift DQ phase. |
| 399 | * Args: dram_info ddr3 training information struct |
| 400 | * cur_pup bit array of the function active pups. |
| 401 | * pbs_pattern_idx Index of PBS pattern |
| 402 | * Notes: |
| 403 | * Returns: MV_OK if success, other error code if fail. |
| 404 | */ |
| 405 | static int ddr3_tx_shift_dqs_adll_step_before_fail(MV_DRAM_INFO *dram_info, |
| 406 | u32 cur_pup, |
| 407 | u32 pbs_pattern_idx, u32 ecc) |
| 408 | { |
| 409 | u32 unlock_pup; /* bit array of unlock pups */ |
| 410 | u32 new_lockup_pup; /* bit array of compare failed pups */ |
| 411 | u32 adll_val = 4; /* INIT_WL_DELAY */ |
| 412 | u32 cur_max_pup, pup; |
| 413 | u32 dqs_dly_set[MAX_PUP_NUM] = { 0 }; |
| 414 | u32 *pattern_ptr; |
| 415 | |
| 416 | /* Choose pattern */ |
| 417 | switch (dram_info->ddr_width) { |
| 418 | #if defined(MV88F672X) |
| 419 | case 16: |
| 420 | pattern_ptr = (u32 *)&pbs_pattern[pbs_pattern_idx]; |
| 421 | break; |
| 422 | #endif |
| 423 | case 32: |
| 424 | pattern_ptr = (u32 *)&pbs_pattern_32b[pbs_pattern_idx]; |
| 425 | break; |
| 426 | #if defined(MV88F78X60) |
| 427 | case 64: |
| 428 | pattern_ptr = (u32 *)&pbs_pattern_64b[pbs_pattern_idx]; |
| 429 | break; |
| 430 | #endif |
| 431 | default: |
| 432 | return MV_FAIL; |
| 433 | } |
| 434 | |
| 435 | /* Set current pup number */ |
| 436 | if (cur_pup == 0x1) /* Ecc mode */ |
| 437 | cur_max_pup = 1; |
| 438 | else |
| 439 | cur_max_pup = dram_info->num_of_std_pups; |
| 440 | |
| 441 | unlock_pup = cur_pup; /* '1' for each unlocked pup */ |
| 442 | |
| 443 | /* Loop on all ADLL Vaules */ |
| 444 | do { |
| 445 | /* Loop until found first fail */ |
| 446 | adll_val++; |
| 447 | |
| 448 | /* |
| 449 | * Increment (Move to right - ADLL) DQ TX delay |
| 450 | * (broadcast to all Data PUPs) |
| 451 | */ |
| 452 | for (pup = 0; pup < cur_max_pup; pup++) |
| 453 | ddr3_pbs_write_pup_dqs_reg(CS0, |
| 454 | pup * (1 - ecc) + |
| 455 | ECC_PUP * ecc, adll_val); |
| 456 | |
| 457 | /* |
| 458 | * Write and Read, compare results (read was already verified) |
| 459 | */ |
| 460 | /* 0 - all locked */ |
| 461 | new_lockup_pup = 0; |
| 462 | |
| 463 | if (MV_OK != ddr3_sdram_compare(dram_info, unlock_pup, |
| 464 | &new_lockup_pup, |
| 465 | pattern_ptr, LEN_PBS_PATTERN, |
| 466 | SDRAM_PBS_TX_OFFS, 1, 0, |
| 467 | NULL, |
| 468 | 0)) |
| 469 | return MV_FAIL; |
| 470 | |
| 471 | unlock_pup &= ~new_lockup_pup; |
| 472 | |
| 473 | DEBUG_PBS_FULL_S("Shift DQS by 2 steps for PUPs: "); |
| 474 | DEBUG_PBS_FULL_D(unlock_pup, 2); |
| 475 | DEBUG_PBS_FULL_C(", Set ADLL value = ", adll_val, 2); |
| 476 | |
| 477 | /* If any PUP failed there is '1' to mark the PUP */ |
| 478 | if (new_lockup_pup != 0) { |
| 479 | /* |
| 480 | * Decrement (Move Back to Left two steps - ADLL) |
| 481 | * DQ TX delay for current failed pups and save |
| 482 | */ |
| 483 | for (pup = 0; pup < cur_max_pup; pup++) { |
| 484 | if (((new_lockup_pup >> pup) & 0x1) && |
| 485 | dqs_dly_set[pup] == 0) |
| 486 | dqs_dly_set[pup] = adll_val - 1; |
| 487 | } |
| 488 | } |
| 489 | } while ((unlock_pup != 0) && (adll_val != ADLL_MAX)); |
| 490 | |
| 491 | if (unlock_pup != 0) { |
| 492 | DEBUG_PBS_FULL_S("DDR3 - PBS Tx - Shift DQ - Adll value reached maximum\n"); |
| 493 | |
| 494 | for (pup = 0; pup < cur_max_pup; pup++) { |
| 495 | if (((unlock_pup >> pup) & 0x1) && |
| 496 | dqs_dly_set[pup] == 0) |
| 497 | dqs_dly_set[pup] = adll_val - 1; |
| 498 | } |
| 499 | } |
| 500 | |
| 501 | DEBUG_PBS_FULL_C("PBS TX one step before fail last pups locked Adll ", |
| 502 | adll_val - 2, 2); |
| 503 | |
| 504 | /* Set the PUP DQS DLY Values */ |
| 505 | for (pup = 0; pup < cur_max_pup; pup++) |
| 506 | ddr3_pbs_write_pup_dqs_reg(CS0, pup * (1 - ecc) + ECC_PUP * ecc, |
| 507 | dqs_dly_set[pup]); |
| 508 | |
| 509 | /* Found one phase before fail */ |
| 510 | return MV_OK; |
| 511 | } |
| 512 | |
| 513 | /* |
| 514 | * Name: ddr3_pbs_rx |
| 515 | * Desc: Execute the PBS RX phase. |
| 516 | * Args: dram_info ddr3 training information struct |
| 517 | * Notes: |
| 518 | * Returns: MV_OK if success, other error code if fail. |
| 519 | */ |
| 520 | int ddr3_pbs_rx(MV_DRAM_INFO *dram_info) |
| 521 | { |
| 522 | /* |
| 523 | * Array to hold the total sum of skew from all iterations |
| 524 | * (for average purpose) |
| 525 | */ |
| 526 | u32 skew_sum_array[MAX_PUP_NUM][DQ_NUM] = { {0} }; |
| 527 | |
| 528 | /* |
| 529 | * Array to hold the total average skew from both patterns |
| 530 | * (for average purpose) |
| 531 | */ |
| 532 | u32 pattern_skew_array[MAX_PUP_NUM][DQ_NUM] = { {0} }; |
| 533 | |
| 534 | u32 pbs_rep_time = 0; /* counts number of loop in case of fail */ |
| 535 | /* bit array for unlock pups - used to repeat on the RX operation */ |
| 536 | u32 cur_pup; |
| 537 | u32 max_pup; |
| 538 | u32 pbs_retry; |
| 539 | u32 pup, dq, pups, cur_max_pup, valid_pup, reg; |
| 540 | u32 pattern_idx; |
| 541 | u32 ecc; |
| 542 | /* indicates whether we need to start the loop again */ |
| 543 | int start_over; |
| 544 | int status; |
| 545 | |
| 546 | DEBUG_PBS_S("DDR3 - PBS RX - Starting PBS RX procedure\n"); |
| 547 | |
| 548 | pups = dram_info->num_of_total_pups; |
| 549 | max_pup = dram_info->num_of_total_pups; |
| 550 | |
| 551 | /* Enable SW override */ |
| 552 | reg = reg_read(REG_DRAM_TRAINING_2_ADDR) | |
| 553 | (1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS); |
| 554 | /* [0] = 1 - Enable SW override */ |
| 555 | /* 0x15B8 - Training SW 2 Register */ |
| 556 | reg_write(REG_DRAM_TRAINING_2_ADDR, reg); |
| 557 | DEBUG_PBS_FULL_S("DDR3 - PBS RX - SW Override Enabled\n"); |
| 558 | |
| 559 | reg = 1 << REG_DRAM_TRAINING_AUTO_OFFS; |
| 560 | reg_write(REG_DRAM_TRAINING_ADDR, reg); /* 0x15B0 - Training Register */ |
| 561 | |
| 562 | /* Running twice for 2 different patterns. each patterns - 3 times */ |
| 563 | for (pattern_idx = 0; pattern_idx < COUNT_PBS_PATTERN; pattern_idx++) { |
| 564 | DEBUG_PBS_FULL_C("DDR3 - PBS RX - Working with pattern - ", |
| 565 | pattern_idx, 1); |
| 566 | |
| 567 | /* Reset sum array */ |
| 568 | for (pup = 0; pup < pups; pup++) { |
| 569 | for (dq = 0; dq < DQ_NUM; dq++) |
| 570 | skew_sum_array[pup][dq] = 0; |
| 571 | } |
| 572 | |
| 573 | /* |
| 574 | * Perform PBS several of times (3 for each pattern). |
| 575 | * At the end, we'll use the average |
| 576 | */ |
| 577 | /* If there is ECC, do each PBS again with mux change */ |
| 578 | for (pbs_retry = 0; pbs_retry < COUNT_PBS_REPEAT; pbs_retry++) { |
| 579 | for (ecc = 0; ecc < (dram_info->ecc_ena + 1); ecc++) { |
| 580 | /* |
| 581 | * This parameter stores the current PUP |
| 582 | * num - ecc mode dependent - 4-8 / 1 pups |
| 583 | */ |
| 584 | cur_max_pup = (1 - ecc) * |
| 585 | dram_info->num_of_std_pups + ecc; |
| 586 | |
| 587 | if (ecc) { |
| 588 | /* Only 1 pup in this case */ |
| 589 | valid_pup = 0x1; |
| 590 | } else if (cur_max_pup > 4) { |
| 591 | /* 64 bit - 8 pups */ |
| 592 | valid_pup = 0xFF; |
| 593 | } else if (cur_max_pup == 4) { |
| 594 | /* 32 bit - 4 pups */ |
| 595 | valid_pup = 0xF; |
| 596 | } else { |
| 597 | /* 16 bit - 2 pups */ |
| 598 | valid_pup = 0x3; |
| 599 | } |
| 600 | |
| 601 | /* ECC Support - Switch ECC Mux on ecc=1 */ |
| 602 | reg = reg_read(REG_DRAM_TRAINING_2_ADDR) & |
| 603 | ~(1 << REG_DRAM_TRAINING_2_ECC_MUX_OFFS); |
| 604 | reg |= (dram_info->ecc_ena * ecc << |
| 605 | REG_DRAM_TRAINING_2_ECC_MUX_OFFS); |
| 606 | reg_write(REG_DRAM_TRAINING_2_ADDR, reg); |
| 607 | |
| 608 | if (ecc) |
| 609 | DEBUG_PBS_FULL_S("DDR3 - PBS Rx - ECC Mux Enabled\n"); |
| 610 | else |
| 611 | DEBUG_PBS_FULL_S("DDR3 - PBS Rx - ECC Mux Disabled\n"); |
| 612 | |
| 613 | /* Init iteration values */ |
| 614 | /* Clear the locked DQs */ |
| 615 | for (pup = 0; pup < cur_max_pup; pup++) { |
| 616 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 617 | pbs_locked_dq[ |
| 618 | pup + ecc * (max_pup - 1)][dq] = |
| 619 | 0; |
| 620 | } |
| 621 | } |
| 622 | |
| 623 | pbs_rep_time = 0; |
| 624 | cur_pup = valid_pup; |
| 625 | start_over = 0; |
| 626 | |
| 627 | /* |
| 628 | * Run loop On current Pattern and current |
| 629 | * pattern iteration (just to cover the false |
| 630 | * fail problem |
| 631 | */ |
| 632 | do { |
| 633 | DEBUG_PBS_FULL_S("DDR3 - PBS Rx - Pbs Rep Loop is "); |
| 634 | DEBUG_PBS_FULL_D(pbs_rep_time, 1); |
| 635 | DEBUG_PBS_FULL_S(", for Retry No."); |
| 636 | DEBUG_PBS_FULL_D(pbs_retry, 1); |
| 637 | DEBUG_PBS_FULL_S("\n"); |
| 638 | |
| 639 | /* Set all PBS values to MAX (31) */ |
| 640 | for (pup = 0; pup < cur_max_pup; pup++) { |
| 641 | for (dq = 0; dq < DQ_NUM; dq++) |
| 642 | ddr3_write_pup_reg( |
| 643 | PUP_PBS_RX + |
| 644 | pbs_dq_mapping[ |
| 645 | pup * (1 - ecc) |
| 646 | + ecc * ECC_PUP] |
| 647 | [dq], CS0, |
| 648 | pup + ecc * ECC_PUP, |
| 649 | 0, MAX_PBS); |
| 650 | } |
| 651 | |
| 652 | /* Set all DQS PBS values to MIN (0) */ |
| 653 | for (pup = 0; pup < cur_max_pup; pup++) { |
| 654 | ddr3_write_pup_reg(PUP_PBS_RX + |
| 655 | DQ_NUM, CS0, |
| 656 | pup + |
| 657 | ecc * |
| 658 | ECC_PUP, 0, |
| 659 | 0); |
| 660 | } |
| 661 | |
| 662 | /* Shift DQS, To first Fail */ |
| 663 | DEBUG_PBS_FULL_S("DDR3 - PBS Rx - Shift RX DQS to first fail\n"); |
| 664 | |
| 665 | status = ddr3_rx_shift_dqs_to_first_fail |
| 666 | (dram_info, cur_pup, |
| 667 | pattern_idx, ecc); |
| 668 | if (MV_OK != status) { |
| 669 | DEBUG_PBS_S("DDR3 - PBS Rx - ddr3_rx_shift_dqs_to_first_fail failed.\n"); |
| 670 | DEBUG_PBS_D(status, 8); |
| 671 | DEBUG_PBS_S("\nDDR3 - PBS Rx - SKIP.\n"); |
| 672 | |
| 673 | /* Reset read FIFO */ |
| 674 | reg = reg_read(REG_DRAM_TRAINING_ADDR); |
| 675 | /* Start Auto Read Leveling procedure */ |
| 676 | reg |= (1 << REG_DRAM_TRAINING_RL_OFFS); |
| 677 | /* 0x15B0 - Training Register */ |
| 678 | reg_write(REG_DRAM_TRAINING_ADDR, reg); |
| 679 | |
| 680 | reg = reg_read(REG_DRAM_TRAINING_2_ADDR); |
| 681 | reg |= ((1 << REG_DRAM_TRAINING_2_FIFO_RST_OFFS) |
| 682 | + (1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS)); |
| 683 | /* [0] = 1 - Enable SW override, [4] = 1 - FIFO reset */ |
| 684 | /* 0x15B8 - Training SW 2 Register */ |
| 685 | reg_write(REG_DRAM_TRAINING_2_ADDR, reg); |
| 686 | |
| 687 | do { |
| 688 | reg = (reg_read(REG_DRAM_TRAINING_2_ADDR)) |
| 689 | & (1 << REG_DRAM_TRAINING_2_FIFO_RST_OFFS); |
| 690 | } while (reg); /* Wait for '0' */ |
| 691 | |
| 692 | reg = reg_read(REG_DRAM_TRAINING_ADDR); |
| 693 | /* Clear Auto Read Leveling procedure */ |
| 694 | reg &= ~(1 << REG_DRAM_TRAINING_RL_OFFS); |
| 695 | /* 0x15B0 - Training Register */ |
| 696 | reg_write(REG_DRAM_TRAINING_ADDR, reg); |
| 697 | |
| 698 | /* Set ADLL to 15 */ |
| 699 | for (pup = 0; pup < max_pup; |
| 700 | pup++) { |
| 701 | ddr3_write_pup_reg |
| 702 | (PUP_DQS_RD, CS0, |
| 703 | pup + |
| 704 | (ecc * ECC_PUP), 0, |
| 705 | 15); |
| 706 | } |
| 707 | |
| 708 | /* Set all PBS values to MIN (0) */ |
| 709 | for (pup = 0; pup < cur_max_pup; |
| 710 | pup++) { |
| 711 | for (dq = 0; |
| 712 | dq < DQ_NUM; dq++) |
| 713 | ddr3_write_pup_reg |
| 714 | (PUP_PBS_RX + |
| 715 | pbs_dq_mapping |
| 716 | [pup * (1 - ecc) + |
| 717 | ecc * ECC_PUP] |
| 718 | [dq], CS0, |
| 719 | pup + ecc * ECC_PUP, |
| 720 | 0, MIN_PBS); |
| 721 | } |
| 722 | |
| 723 | return MV_OK; |
| 724 | } |
| 725 | |
| 726 | /* PBS For each bit */ |
| 727 | DEBUG_PBS_FULL_S("DDR3 - PBS Rx - perform PBS for each bit\n"); |
| 728 | /* in this stage - start_over = 0; */ |
| 729 | if (MV_OK != ddr3_pbs_per_bit( |
| 730 | dram_info, &start_over, |
| 731 | 0, &cur_pup, |
| 732 | pattern_idx, ecc)) { |
| 733 | DEBUG_PBS_S("DDR3 - PBS Rx - ddr3_pbs_per_bit failed."); |
| 734 | return MV_DDR3_TRAINING_ERR_PBS_RX_PER_BIT; |
| 735 | } |
| 736 | |
| 737 | } while ((start_over == 1) && |
| 738 | (++pbs_rep_time < COUNT_PBS_STARTOVER)); |
| 739 | |
| 740 | if (pbs_rep_time == COUNT_PBS_STARTOVER && |
| 741 | start_over == 1) { |
| 742 | DEBUG_PBS_FULL_S("DDR3 - PBS Rx - FAIL - Algorithm failed doing RX PBS\n"); |
| 743 | return MV_DDR3_TRAINING_ERR_PBS_RX_MAX_VAL; |
| 744 | } |
| 745 | |
| 746 | /* Return DQS ADLL to default value - 15 */ |
| 747 | /* Set all DQS PBS values to MIN (0) */ |
| 748 | for (pup = 0; pup < cur_max_pup; pup++) |
| 749 | ddr3_write_pup_reg(PUP_DQS_RD, CS0, |
| 750 | pup + ecc * ECC_PUP, |
| 751 | 0, INIT_RL_DELAY); |
| 752 | |
| 753 | DEBUG_PBS_FULL_C("DDR3 - PBS RX - values for iteration - ", |
| 754 | pbs_retry, 1); |
| 755 | for (pup = 0; pup < cur_max_pup; pup++) { |
| 756 | /* |
| 757 | * To minimize delay elements, inc from |
| 758 | * pbs value the min pbs val |
| 759 | */ |
| 760 | DEBUG_PBS_FULL_S("DDR3 - PBS - PUP"); |
| 761 | DEBUG_PBS_FULL_D((pup + |
| 762 | (ecc * ECC_PUP)), 1); |
| 763 | DEBUG_PBS_FULL_S(": "); |
| 764 | |
| 765 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 766 | /* Set skew value for all dq */ |
| 767 | /* |
| 768 | * Bit# Deskew <- Bit# Deskew - |
| 769 | * last / first failing bit |
| 770 | * Deskew For all bits (per PUP) |
| 771 | * (minimize delay elements) |
| 772 | */ |
| 773 | DEBUG_PBS_FULL_S("DQ"); |
| 774 | DEBUG_PBS_FULL_D(dq, 1); |
| 775 | DEBUG_PBS_FULL_S("-"); |
| 776 | DEBUG_PBS_FULL_D(skew_array |
| 777 | [((pup) * |
| 778 | DQ_NUM) + |
| 779 | dq], 2); |
| 780 | DEBUG_PBS_FULL_S(", "); |
| 781 | } |
| 782 | DEBUG_PBS_FULL_S("\n"); |
| 783 | } |
| 784 | |
| 785 | /* |
| 786 | * Collect the results we got on this trial |
| 787 | * of PBS |
| 788 | */ |
| 789 | for (pup = 0; pup < cur_max_pup; pup++) { |
| 790 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 791 | skew_sum_array |
| 792 | [pup + (ecc * (max_pup - 1))] |
| 793 | [dq] += |
| 794 | skew_array[((pup) * DQ_NUM) + dq]; |
| 795 | } |
| 796 | } |
| 797 | |
| 798 | /* ECC Support - Disable ECC MUX */ |
| 799 | reg = reg_read(REG_DRAM_TRAINING_2_ADDR) & |
| 800 | ~(1 << REG_DRAM_TRAINING_2_ECC_MUX_OFFS); |
| 801 | reg_write(REG_DRAM_TRAINING_2_ADDR, reg); |
| 802 | } |
| 803 | } |
| 804 | |
| 805 | /* |
| 806 | * Calculate the average skew for current pattern for each |
| 807 | * pup and each bit |
| 808 | */ |
| 809 | DEBUG_PBS_FULL_C("DDR3 - PBS RX - Average for pattern - ", |
| 810 | pattern_idx, 1); |
| 811 | for (pup = 0; pup < max_pup; pup++) { |
| 812 | /* |
| 813 | * FOR ECC only :: found min and max value for |
| 814 | * current pattern skew array |
| 815 | */ |
| 816 | /* Loop for all dqs */ |
| 817 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 818 | pattern_skew_array[pup][dq] += |
| 819 | (skew_sum_array[pup][dq] / |
| 820 | COUNT_PBS_REPEAT); |
| 821 | } |
| 822 | } |
| 823 | |
| 824 | DEBUG_PBS_C("DDR3 - PBS RX - values for current pattern - ", |
| 825 | pattern_idx, 1); |
| 826 | for (pup = 0; pup < max_pup; pup++) { |
| 827 | /* |
| 828 | * To minimize delay elements, inc from pbs value the |
| 829 | * min pbs val |
| 830 | */ |
| 831 | DEBUG_PBS_S("DDR3 - PBS RX - PUP"); |
| 832 | DEBUG_PBS_D(pup, 1); |
| 833 | DEBUG_PBS_S(": "); |
| 834 | |
| 835 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 836 | /* Set skew value for all dq */ |
| 837 | /* |
| 838 | * Bit# Deskew <- Bit# Deskew - last / first |
| 839 | * failing bit Deskew For all bits (per PUP) |
| 840 | * (minimize delay elements) |
| 841 | */ |
| 842 | DEBUG_PBS_S("DQ"); |
| 843 | DEBUG_PBS_D(dq, 1); |
| 844 | DEBUG_PBS_S("-"); |
| 845 | DEBUG_PBS_D(skew_sum_array[pup][dq] / |
| 846 | COUNT_PBS_REPEAT, 2); |
| 847 | DEBUG_PBS_S(", "); |
| 848 | } |
| 849 | DEBUG_PBS_S("\n"); |
| 850 | } |
| 851 | } |
| 852 | |
| 853 | /* Calculate the average skew */ |
| 854 | for (pup = 0; pup < max_pup; pup++) { |
| 855 | for (dq = 0; dq < DQ_NUM; dq++) |
| 856 | skew_array[((pup) * DQ_NUM) + dq] = |
| 857 | pattern_skew_array[pup][dq] / COUNT_PBS_PATTERN; |
| 858 | } |
| 859 | |
| 860 | DEBUG_PBS_S("DDR3 - PBS RX - Average for all patterns:\n"); |
| 861 | for (pup = 0; pup < max_pup; pup++) { |
| 862 | /* |
| 863 | * To minimize delay elements, inc from pbs value the |
| 864 | * min pbs val |
| 865 | */ |
| 866 | DEBUG_PBS_S("DDR3 - PBS - PUP"); |
| 867 | DEBUG_PBS_D(pup, 1); |
| 868 | DEBUG_PBS_S(": "); |
| 869 | |
| 870 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 871 | /* Set skew value for all dq */ |
| 872 | /* |
| 873 | * Bit# Deskew <- Bit# Deskew - last / first |
| 874 | * failing bit Deskew For all bits (per PUP) |
| 875 | * (minimize delay elements) |
| 876 | */ |
| 877 | DEBUG_PBS_S("DQ"); |
| 878 | DEBUG_PBS_D(dq, 1); |
| 879 | DEBUG_PBS_S("-"); |
| 880 | DEBUG_PBS_D(skew_array[(pup * DQ_NUM) + dq], 2); |
| 881 | DEBUG_PBS_S(", "); |
| 882 | } |
| 883 | DEBUG_PBS_S("\n"); |
| 884 | } |
| 885 | |
| 886 | /* Return ADLL to default value */ |
| 887 | ddr3_write_pup_reg(PUP_DQS_RD, CS0, PUP_BC, 0, INIT_RL_DELAY); |
| 888 | |
| 889 | /* Set averaged PBS results */ |
| 890 | ddr3_set_pbs_results(dram_info, 0); |
| 891 | |
| 892 | /* Disable SW override - Must be in a different stage */ |
| 893 | /* [0]=0 - Enable SW override */ |
| 894 | reg = reg_read(REG_DRAM_TRAINING_2_ADDR); |
| 895 | reg &= ~(1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS); |
| 896 | /* 0x15B8 - Training SW 2 Register */ |
| 897 | reg_write(REG_DRAM_TRAINING_2_ADDR, reg); |
| 898 | |
| 899 | reg = reg_read(REG_DRAM_TRAINING_1_ADDR) | |
| 900 | (1 << REG_DRAM_TRAINING_1_TRNBPOINT_OFFS); |
| 901 | reg_write(REG_DRAM_TRAINING_1_ADDR, reg); |
| 902 | |
| 903 | DEBUG_PBS_FULL_S("DDR3 - PBS RX - ended successfuly\n"); |
| 904 | |
| 905 | return MV_OK; |
| 906 | } |
| 907 | |
| 908 | /* |
| 909 | * Name: ddr3_rx_shift_dqs_to_first_fail |
| 910 | * Desc: Execute the Rx shift DQ phase. |
| 911 | * Args: dram_info ddr3 training information struct |
| 912 | * cur_pup bit array of the function active pups. |
| 913 | * pbs_pattern_idx Index of PBS pattern |
| 914 | * Notes: |
| 915 | * Returns: MV_OK if success, other error code if fail. |
| 916 | */ |
| 917 | static int ddr3_rx_shift_dqs_to_first_fail(MV_DRAM_INFO *dram_info, u32 cur_pup, |
| 918 | u32 pbs_pattern_idx, u32 ecc) |
| 919 | { |
| 920 | u32 unlock_pup; /* bit array of unlock pups */ |
| 921 | u32 new_lockup_pup; /* bit array of compare failed pups */ |
| 922 | u32 adll_val = MAX_DELAY; |
| 923 | u32 dqs_deskew_val = 0; /* current value of DQS PBS deskew */ |
| 924 | u32 cur_max_pup, pup, pass_pup; |
| 925 | u32 *pattern_ptr; |
| 926 | |
| 927 | /* Choose pattern */ |
| 928 | switch (dram_info->ddr_width) { |
| 929 | #if defined(MV88F672X) |
| 930 | case 16: |
| 931 | pattern_ptr = (u32 *)&pbs_pattern[pbs_pattern_idx]; |
| 932 | break; |
| 933 | #endif |
| 934 | case 32: |
| 935 | pattern_ptr = (u32 *)&pbs_pattern_32b[pbs_pattern_idx]; |
| 936 | break; |
| 937 | #if defined(MV88F78X60) |
| 938 | case 64: |
| 939 | pattern_ptr = (u32 *)&pbs_pattern_64b[pbs_pattern_idx]; |
| 940 | break; |
| 941 | #endif |
| 942 | default: |
| 943 | return MV_FAIL; |
| 944 | } |
| 945 | |
| 946 | /* Set current pup number */ |
| 947 | if (cur_pup == 0x1) /* Ecc mode */ |
| 948 | cur_max_pup = 1; |
| 949 | else |
| 950 | cur_max_pup = dram_info->num_of_std_pups; |
| 951 | |
| 952 | unlock_pup = cur_pup; /* '1' for each unlocked pup */ |
| 953 | |
| 954 | DEBUG_PBS_FULL_S("DDR3 - PBS RX - Shift DQS - Starting...\n"); |
| 955 | |
| 956 | /* Set DQS ADLL to MAX */ |
| 957 | DEBUG_PBS_FULL_S("DDR3 - PBS RX - Shift DQS - Set DQS ADLL to Max for all PUPs\n"); |
| 958 | for (pup = 0; pup < cur_max_pup; pup++) |
| 959 | ddr3_write_pup_reg(PUP_DQS_RD, CS0, pup + ecc * ECC_PUP, 0, |
| 960 | MAX_DELAY); |
| 961 | |
| 962 | /* Loop on all ADLL Vaules */ |
| 963 | do { |
| 964 | /* Loop until found fail for all pups */ |
| 965 | new_lockup_pup = 0; |
| 966 | if (MV_OK != ddr3_sdram_compare(dram_info, unlock_pup, |
| 967 | &new_lockup_pup, |
| 968 | pattern_ptr, LEN_PBS_PATTERN, |
| 969 | SDRAM_PBS_I_OFFS + |
| 970 | pbs_pattern_idx * SDRAM_PBS_NEXT_OFFS, |
| 971 | 0, 0, NULL, 0)) { |
| 972 | DEBUG_PBS_S("DDR3 - PBS Rx - Shift DQS - MV_DDR3_TRAINING_ERR_PBS_SHIFT_QDS_SRAM_CMP(ddr3_sdram_compare)\n"); |
| 973 | return MV_DDR3_TRAINING_ERR_PBS_SHIFT_QDS_SRAM_CMP; |
| 974 | } |
| 975 | |
| 976 | if ((new_lockup_pup != 0) && (dqs_deskew_val <= 1)) { |
| 977 | /* Fail on start with first deskew value */ |
| 978 | /* Decrement DQS ADLL */ |
| 979 | --adll_val; |
| 980 | if (adll_val == ADLL_MIN) { |
| 981 | DEBUG_PBS_S("DDR3 - PBS Rx - Shift DQS - fail on start with first deskew value\n"); |
| 982 | return MV_DDR3_TRAINING_ERR_PBS_SHIFT_QDS_SRAM_CMP; |
| 983 | } |
| 984 | ddr3_write_pup_reg(PUP_DQS_RD, CS0, pup + ecc * ECC_PUP, |
| 985 | 0, adll_val); |
| 986 | continue; |
| 987 | } |
| 988 | |
| 989 | /* Update all new locked pups */ |
| 990 | unlock_pup &= ~new_lockup_pup; |
| 991 | |
| 992 | if ((unlock_pup == 0) || (dqs_deskew_val == MAX_PBS)) { |
| 993 | if (dqs_deskew_val == MAX_PBS) { |
| 994 | /* |
| 995 | * Reach max value of dqs deskew or get fail |
| 996 | * for all pups |
| 997 | */ |
| 998 | DEBUG_PBS_FULL_S("DDR3 - PBS RX - Shift DQS - DQS deskew reached maximum value\n"); |
| 999 | } |
| 1000 | break; |
| 1001 | } |
| 1002 | |
| 1003 | DEBUG_PBS_FULL_S("DDR3 - PBS RX - Shift DQS - Inc DQS deskew for PUPs: "); |
| 1004 | DEBUG_PBS_FULL_D(unlock_pup, 2); |
| 1005 | DEBUG_PBS_FULL_C(", deskew = ", dqs_deskew_val, 2); |
| 1006 | |
| 1007 | /* Increment DQS deskew elements - Only for unlocked pups */ |
| 1008 | dqs_deskew_val++; |
| 1009 | for (pup = 0; pup < cur_max_pup; pup++) { |
| 1010 | if (IS_PUP_ACTIVE(unlock_pup, pup) == 1) { |
| 1011 | ddr3_write_pup_reg(PUP_PBS_RX + DQS_DQ_NUM, CS0, |
| 1012 | pup + ecc * ECC_PUP, 0, |
| 1013 | dqs_deskew_val); |
| 1014 | } |
| 1015 | } |
| 1016 | } while (1); |
| 1017 | |
| 1018 | DEBUG_PBS_FULL_S("DDR3 - PBS RX - Shift DQS - ADLL shift one step before fail\n"); |
| 1019 | /* Continue to ADLL shift one step before fail */ |
| 1020 | unlock_pup = cur_pup; |
| 1021 | do { |
| 1022 | /* Loop until pass compare for all pups */ |
| 1023 | new_lockup_pup = 0; |
| 1024 | /* Read and compare results */ |
| 1025 | if (MV_OK != ddr3_sdram_compare(dram_info, unlock_pup, &new_lockup_pup, |
| 1026 | pattern_ptr, LEN_PBS_PATTERN, |
| 1027 | SDRAM_PBS_I_OFFS + |
| 1028 | pbs_pattern_idx * SDRAM_PBS_NEXT_OFFS, |
| 1029 | 1, 0, NULL, 0)) { |
| 1030 | DEBUG_PBS_S("DDR3 - PBS Rx - Shift DQS - MV_DDR3_TRAINING_ERR_PBS_SHIFT_QDS_SRAM_CMP(ddr3_sdram_compare)\n"); |
| 1031 | return MV_DDR3_TRAINING_ERR_PBS_SHIFT_QDS_SRAM_CMP; |
| 1032 | } |
| 1033 | |
| 1034 | /* |
| 1035 | * Get mask for pup which passed so their adll will be |
| 1036 | * changed to 2 steps before fails |
| 1037 | */ |
| 1038 | pass_pup = unlock_pup & ~new_lockup_pup; |
| 1039 | |
| 1040 | DEBUG_PBS_FULL_S("Shift DQS by 2 steps for PUPs: "); |
| 1041 | DEBUG_PBS_FULL_D(pass_pup, 2); |
| 1042 | DEBUG_PBS_FULL_C(", Set ADLL value = ", (adll_val - 2), 2); |
| 1043 | |
| 1044 | /* Only for pass pups */ |
| 1045 | for (pup = 0; pup < cur_max_pup; pup++) { |
| 1046 | if (IS_PUP_ACTIVE(pass_pup, pup) == 1) { |
| 1047 | ddr3_write_pup_reg(PUP_DQS_RD, CS0, |
| 1048 | pup + ecc * ECC_PUP, 0, |
| 1049 | (adll_val - 2)); |
| 1050 | } |
| 1051 | } |
| 1052 | |
| 1053 | /* Locked pups that compare success */ |
| 1054 | unlock_pup &= new_lockup_pup; |
| 1055 | |
| 1056 | if (unlock_pup == 0) { |
| 1057 | /* All pups locked */ |
| 1058 | break; |
| 1059 | } |
| 1060 | |
| 1061 | /* Found error */ |
| 1062 | if (adll_val == 0) { |
| 1063 | DEBUG_PBS_FULL_S("DDR3 - PBS Rx - Shift DQS - Adll reach min value\n"); |
| 1064 | return MV_DDR3_TRAINING_ERR_PBS_SHIFT_QDS_MAX_VAL; |
| 1065 | } |
| 1066 | |
| 1067 | /* |
| 1068 | * Decrement (Move Back to Left one phase - ADLL) dqs RX delay |
| 1069 | */ |
| 1070 | adll_val--; |
| 1071 | for (pup = 0; pup < cur_max_pup; pup++) { |
| 1072 | if (IS_PUP_ACTIVE(unlock_pup, pup) == 1) { |
| 1073 | ddr3_write_pup_reg(PUP_DQS_RD, CS0, |
| 1074 | pup + ecc * ECC_PUP, 0, |
| 1075 | adll_val); |
| 1076 | } |
| 1077 | } |
| 1078 | } while (1); |
| 1079 | |
| 1080 | return MV_OK; |
| 1081 | } |
| 1082 | |
| 1083 | /* |
| 1084 | * lock_pups() extracted from ddr3_pbs_per_bit(). This just got too |
| 1085 | * much indented making it hard to read / edit. |
| 1086 | */ |
| 1087 | static void lock_pups(u32 pup, u32 *pup_locked, u8 *unlock_pup_dq_array, |
| 1088 | u32 pbs_curr_val, u32 start_pbs, u32 ecc, int is_tx) |
| 1089 | { |
| 1090 | u32 dq; |
| 1091 | int idx; |
| 1092 | |
| 1093 | /* Lock PBS value for all remaining PUPs bits */ |
| 1094 | DEBUG_PBS_FULL_S("DDR3 - PBS Per bit - Lock PBS value for all remaining PUPs bits, pup "); |
| 1095 | DEBUG_PBS_FULL_D(pup, 1); |
| 1096 | DEBUG_PBS_FULL_C(" pbs value ", pbs_curr_val, 2); |
| 1097 | |
| 1098 | idx = pup * (1 - ecc) + ecc * ECC_PUP; |
| 1099 | *pup_locked &= ~(1 << pup); |
| 1100 | |
| 1101 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 1102 | if (IS_PUP_ACTIVE(unlock_pup_dq_array[dq], pup) == 1) { |
| 1103 | int offs; |
| 1104 | |
| 1105 | /* Lock current dq */ |
| 1106 | unlock_pup_dq_array[dq] &= ~(1 << pup); |
| 1107 | skew_array[(pup * DQ_NUM) + dq] = pbs_curr_val; |
| 1108 | |
| 1109 | if (is_tx == 1) |
| 1110 | offs = PUP_PBS_TX; |
| 1111 | else |
| 1112 | offs = PUP_PBS_RX; |
| 1113 | |
| 1114 | ddr3_write_pup_reg(offs + |
| 1115 | pbs_dq_mapping[idx][dq], CS0, |
| 1116 | idx, 0, start_pbs); |
| 1117 | } |
| 1118 | } |
| 1119 | } |
| 1120 | |
| 1121 | /* |
| 1122 | * Name: ddr3_pbs_per_bit |
| 1123 | * Desc: Execute the Per Bit Skew phase. |
| 1124 | * Args: start_over Return whether need to start over the algorithm |
| 1125 | * is_tx Indicate whether Rx or Tx |
| 1126 | * pcur_pup bit array of the function active pups. return the |
| 1127 | * pups that need to repeat on the PBS |
| 1128 | * pbs_pattern_idx Index of PBS pattern |
| 1129 | * |
| 1130 | * Notes: Current implementation supports double activation of this function. |
| 1131 | * i.e. in order to activate this function (using start_over) more than |
| 1132 | * twice, the implementation should change. |
| 1133 | * imlementation limitation are marked using |
| 1134 | * ' CHIP-ONLY! - Implementation Limitation ' |
| 1135 | * Returns: MV_OK if success, other error code if fail. |
| 1136 | */ |
| 1137 | static int ddr3_pbs_per_bit(MV_DRAM_INFO *dram_info, int *start_over, int is_tx, |
| 1138 | u32 *pcur_pup, u32 pbs_pattern_idx, u32 ecc) |
| 1139 | { |
| 1140 | /* |
| 1141 | * Bit array to indicate if we already get fail on bit per pup & dq bit |
| 1142 | */ |
| 1143 | u8 unlock_pup_dq_array[DQ_NUM] = { |
| 1144 | *pcur_pup, *pcur_pup, *pcur_pup, *pcur_pup, *pcur_pup, |
| 1145 | *pcur_pup, *pcur_pup, *pcur_pup |
| 1146 | }; |
| 1147 | |
| 1148 | u8 cmp_unlock_pup_dq_array[COUNT_PBS_COMP_RETRY_NUM][DQ_NUM]; |
| 1149 | u32 pup, dq; |
| 1150 | /* value of pbs is according to RX or TX */ |
| 1151 | u32 start_pbs, last_pbs; |
| 1152 | u32 pbs_curr_val; |
| 1153 | /* bit array that indicates all dq of the pup locked */ |
| 1154 | u32 pup_locked; |
| 1155 | u32 first_fail[MAX_PUP_NUM] = { 0 }; /* count first fail per pup */ |
| 1156 | /* indicates whether we get first fail per pup */ |
| 1157 | int first_failed[MAX_PUP_NUM] = { 0 }; |
| 1158 | /* bit array that indicates pup already get fail */ |
| 1159 | u32 sum_pup_fail; |
| 1160 | /* use to calculate diff between curr pbs to first fail pbs */ |
| 1161 | u32 calc_pbs_diff; |
| 1162 | u32 pbs_cmp_retry; |
| 1163 | u32 max_pup; |
| 1164 | |
| 1165 | /* Set init values for retry array - 8 retry */ |
| 1166 | for (pbs_cmp_retry = 0; pbs_cmp_retry < COUNT_PBS_COMP_RETRY_NUM; |
| 1167 | pbs_cmp_retry++) { |
| 1168 | for (dq = 0; dq < DQ_NUM; dq++) |
| 1169 | cmp_unlock_pup_dq_array[pbs_cmp_retry][dq] = *pcur_pup; |
| 1170 | } |
| 1171 | |
| 1172 | memset(&skew_array, 0, MAX_PUP_NUM * DQ_NUM * sizeof(u32)); |
| 1173 | |
| 1174 | DEBUG_PBS_FULL_S("DDR3 - PBS Per bit - Started\n"); |
| 1175 | |
| 1176 | /* The pbs value depends if rx or tx */ |
| 1177 | if (is_tx == 1) { |
| 1178 | start_pbs = MIN_PBS; |
| 1179 | last_pbs = MAX_PBS; |
| 1180 | } else { |
| 1181 | start_pbs = MAX_PBS; |
| 1182 | last_pbs = MIN_PBS; |
| 1183 | } |
| 1184 | |
| 1185 | pbs_curr_val = start_pbs; |
| 1186 | pup_locked = *pcur_pup; |
| 1187 | |
| 1188 | /* Set current pup number */ |
| 1189 | if (pup_locked == 0x1) /* Ecc mode */ |
| 1190 | max_pup = 1; |
| 1191 | else |
| 1192 | max_pup = dram_info->num_of_std_pups; |
| 1193 | |
| 1194 | do { |
| 1195 | /* Increment/ decrement PBS for un-lock bits only */ |
| 1196 | if (is_tx == 1) |
| 1197 | pbs_curr_val++; |
| 1198 | else |
| 1199 | pbs_curr_val--; |
| 1200 | |
| 1201 | /* Set Current PBS delay */ |
| 1202 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 1203 | /* Check DQ bits to see if locked in all pups */ |
| 1204 | if (unlock_pup_dq_array[dq] == 0) { |
| 1205 | DEBUG_PBS_FULL_S("DDR3 - PBS Per bit - All pups are locked for DQ "); |
| 1206 | DEBUG_PBS_FULL_D(dq, 1); |
| 1207 | DEBUG_PBS_FULL_S("\n"); |
| 1208 | continue; |
| 1209 | } |
| 1210 | |
| 1211 | for (pup = 0; pup < max_pup; pup++) { |
| 1212 | int idx; |
| 1213 | |
| 1214 | idx = pup * (1 - ecc) + ecc * ECC_PUP; |
| 1215 | |
| 1216 | if (IS_PUP_ACTIVE(unlock_pup_dq_array[dq], pup) |
| 1217 | == 0) |
| 1218 | continue; |
| 1219 | |
| 1220 | if (is_tx == 1) |
| 1221 | ddr3_write_pup_reg( |
| 1222 | PUP_PBS_TX + pbs_dq_mapping[idx][dq], |
| 1223 | CS0, idx, 0, pbs_curr_val); |
| 1224 | else |
| 1225 | ddr3_write_pup_reg( |
| 1226 | PUP_PBS_RX + pbs_dq_mapping[idx][dq], |
| 1227 | CS0, idx, 0, pbs_curr_val); |
| 1228 | } |
| 1229 | } |
| 1230 | |
| 1231 | /* |
| 1232 | * Write Read and compare results - run the test |
| 1233 | * DDR_PBS_COMP_RETRY_NUM times |
| 1234 | */ |
| 1235 | /* Run number of read and write to verify */ |
| 1236 | for (pbs_cmp_retry = 0; |
| 1237 | pbs_cmp_retry < COUNT_PBS_COMP_RETRY_NUM; |
| 1238 | pbs_cmp_retry++) { |
| 1239 | |
| 1240 | if (MV_OK != |
| 1241 | ddr3_sdram_pbs_compare(dram_info, pup_locked, is_tx, |
| 1242 | pbs_pattern_idx, |
| 1243 | pbs_curr_val, start_pbs, |
| 1244 | skew_array, |
| 1245 | cmp_unlock_pup_dq_array |
| 1246 | [pbs_cmp_retry], ecc)) |
| 1247 | return MV_FAIL; |
| 1248 | |
| 1249 | for (pup = 0; pup < max_pup; pup++) { |
| 1250 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 1251 | if ((IS_PUP_ACTIVE(unlock_pup_dq_array[dq], |
| 1252 | pup) == 1) |
| 1253 | && (IS_PUP_ACTIVE(cmp_unlock_pup_dq_array |
| 1254 | [pbs_cmp_retry][dq], |
| 1255 | pup) == 0)) { |
| 1256 | DEBUG_PBS_FULL_S("DDR3 - PBS Per bit - PbsCurrVal: "); |
| 1257 | DEBUG_PBS_FULL_D(pbs_curr_val, 2); |
| 1258 | DEBUG_PBS_FULL_S(" PUP: "); |
| 1259 | DEBUG_PBS_FULL_D(pup, 1); |
| 1260 | DEBUG_PBS_FULL_S(" DQ: "); |
| 1261 | DEBUG_PBS_FULL_D(dq, 1); |
| 1262 | DEBUG_PBS_FULL_S(" - failed\n"); |
| 1263 | } |
| 1264 | } |
| 1265 | } |
| 1266 | |
| 1267 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 1268 | unlock_pup_dq_array[dq] &= |
| 1269 | cmp_unlock_pup_dq_array[pbs_cmp_retry][dq]; |
| 1270 | } |
| 1271 | } |
| 1272 | |
| 1273 | pup_locked = 0; |
| 1274 | sum_pup_fail = *pcur_pup; |
| 1275 | |
| 1276 | /* Check which DQ is failed */ |
| 1277 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 1278 | /* Summarize the locked pup */ |
| 1279 | pup_locked |= unlock_pup_dq_array[dq]; |
| 1280 | |
| 1281 | /* Check if get fail */ |
| 1282 | sum_pup_fail &= unlock_pup_dq_array[dq]; |
| 1283 | } |
| 1284 | |
| 1285 | /* If all PUPS are locked in all DQ - Break */ |
| 1286 | if (pup_locked == 0) { |
| 1287 | /* All pups are locked */ |
| 1288 | *start_over = 0; |
| 1289 | DEBUG_PBS_FULL_S("DDR3 - PBS Per bit - All bit in all pups are successfully locked\n"); |
| 1290 | break; |
| 1291 | } |
| 1292 | |
| 1293 | /* PBS deskew elements reach max ? */ |
| 1294 | if (pbs_curr_val == last_pbs) { |
| 1295 | DEBUG_PBS_FULL_S("DDR3 - PBS Per bit - PBS deskew elements reach max\n"); |
| 1296 | /* CHIP-ONLY! - Implementation Limitation */ |
| 1297 | *start_over = (sum_pup_fail != 0) && (!(*start_over)); |
| 1298 | *pcur_pup = pup_locked; |
| 1299 | |
| 1300 | DEBUG_PBS_FULL_S("DDR3 - PBS Per bit - StartOver: "); |
| 1301 | DEBUG_PBS_FULL_D(*start_over, 1); |
| 1302 | DEBUG_PBS_FULL_S(" pup_locked: "); |
| 1303 | DEBUG_PBS_FULL_D(pup_locked, 2); |
| 1304 | DEBUG_PBS_FULL_S(" sum_pup_fail: "); |
| 1305 | DEBUG_PBS_FULL_D(sum_pup_fail, 2); |
| 1306 | DEBUG_PBS_FULL_S("\n"); |
| 1307 | |
| 1308 | /* Lock PBS value for all remaining bits */ |
| 1309 | for (pup = 0; pup < max_pup; pup++) { |
| 1310 | /* Check if current pup already received error */ |
| 1311 | if (IS_PUP_ACTIVE(pup_locked, pup) == 1) { |
| 1312 | /* Valid pup for current function */ |
| 1313 | if (IS_PUP_ACTIVE(sum_pup_fail, pup) == |
| 1314 | 1 && (*start_over == 1)) { |
| 1315 | DEBUG_PBS_FULL_C("DDR3 - PBS Per bit - skipping lock of pup (first loop of pbs)", |
| 1316 | pup, 1); |
| 1317 | continue; |
| 1318 | } else |
| 1319 | if (IS_PUP_ACTIVE(sum_pup_fail, pup) |
| 1320 | == 1) { |
| 1321 | DEBUG_PBS_FULL_C("DDR3 - PBS Per bit - Locking pup %d (even though it wasn't supposed to be locked)", |
| 1322 | pup, 1); |
| 1323 | } |
| 1324 | |
| 1325 | /* Already got fail on the PUP */ |
| 1326 | /* Lock PBS value for all remaining bits */ |
| 1327 | DEBUG_PBS_FULL_S("DDR3 - PBS Per bit - Locking remaning DQs for pup - "); |
| 1328 | DEBUG_PBS_FULL_D(pup, 1); |
| 1329 | DEBUG_PBS_FULL_S(": "); |
| 1330 | |
| 1331 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 1332 | if (IS_PUP_ACTIVE |
| 1333 | (unlock_pup_dq_array[dq], |
| 1334 | pup) == 1) { |
| 1335 | DEBUG_PBS_FULL_D(dq, 1); |
| 1336 | DEBUG_PBS_FULL_S(","); |
| 1337 | /* set current PBS */ |
| 1338 | skew_array[((pup) * |
| 1339 | DQ_NUM) + |
| 1340 | dq] = |
| 1341 | pbs_curr_val; |
| 1342 | } |
| 1343 | } |
| 1344 | |
| 1345 | if (*start_over == 1) { |
| 1346 | /* |
| 1347 | * Reset this pup bit - when |
| 1348 | * restart the PBS, ignore this |
| 1349 | * pup |
| 1350 | */ |
| 1351 | *pcur_pup &= ~(1 << pup); |
| 1352 | } |
| 1353 | DEBUG_PBS_FULL_S("\n"); |
| 1354 | } else { |
| 1355 | DEBUG_PBS_FULL_S("DDR3 - PBS Per bit - Pup "); |
| 1356 | DEBUG_PBS_FULL_D(pup, 1); |
| 1357 | DEBUG_PBS_FULL_C(" is not set in puplocked - ", |
| 1358 | pup_locked, 1); |
| 1359 | } |
| 1360 | } |
| 1361 | |
| 1362 | /* Need to start the PBS again */ |
| 1363 | if (*start_over == 1) { |
| 1364 | DEBUG_PBS_FULL_S("DDR3 - PBS Per bit - false fail - returning to start\n"); |
| 1365 | return MV_OK; |
| 1366 | } |
| 1367 | break; |
| 1368 | } |
| 1369 | |
| 1370 | /* Diff Check */ |
| 1371 | for (pup = 0; pup < max_pup; pup++) { |
| 1372 | if (IS_PUP_ACTIVE(pup_locked, pup) == 1) { |
| 1373 | /* pup is not locked */ |
| 1374 | if (first_failed[pup] == 0) { |
| 1375 | /* No first fail until now */ |
| 1376 | if (IS_PUP_ACTIVE(sum_pup_fail, pup) == |
| 1377 | 0) { |
| 1378 | /* Get first fail */ |
| 1379 | DEBUG_PBS_FULL_C("DDR3 - PBS Per bit - First fail in pup ", |
| 1380 | pup, 1); |
| 1381 | first_failed[pup] = 1; |
| 1382 | first_fail[pup] = pbs_curr_val; |
| 1383 | } |
| 1384 | } else { |
| 1385 | /* Already got first fail */ |
| 1386 | if (is_tx == 1) { |
| 1387 | /* TX - inc pbs */ |
| 1388 | calc_pbs_diff = pbs_curr_val - |
| 1389 | first_fail[pup]; |
| 1390 | } else { |
| 1391 | /* RX - dec pbs */ |
| 1392 | calc_pbs_diff = first_fail[pup] - |
| 1393 | pbs_curr_val; |
| 1394 | } |
| 1395 | |
| 1396 | if (calc_pbs_diff >= PBS_DIFF_LIMIT) { |
| 1397 | lock_pups(pup, &pup_locked, |
| 1398 | unlock_pup_dq_array, |
| 1399 | pbs_curr_val, |
| 1400 | start_pbs, ecc, is_tx); |
| 1401 | } |
| 1402 | } |
| 1403 | } |
| 1404 | } |
| 1405 | } while (1); |
| 1406 | |
| 1407 | return MV_OK; |
| 1408 | } |
| 1409 | |
| 1410 | /* |
| 1411 | * Name: ddr3_set_pbs_results |
| 1412 | * Desc: Set to HW the PBS phase results. |
| 1413 | * Args: is_tx Indicates whether to set Tx or RX results |
| 1414 | * Notes: |
| 1415 | * Returns: MV_OK if success, other error code if fail. |
| 1416 | */ |
| 1417 | static int ddr3_set_pbs_results(MV_DRAM_INFO *dram_info, int is_tx) |
| 1418 | { |
| 1419 | u32 pup, phys_pup, dq; |
| 1420 | u32 max_pup; /* number of valid pups */ |
| 1421 | u32 pbs_min; /* minimal pbs val per pup */ |
| 1422 | u32 pbs_max; /* maximum pbs val per pup */ |
| 1423 | u32 val[9]; |
| 1424 | |
| 1425 | max_pup = dram_info->num_of_total_pups; |
| 1426 | DEBUG_PBS_FULL_S("DDR3 - PBS - ddr3_set_pbs_results:\n"); |
| 1427 | |
| 1428 | /* Loop for all dqs & pups */ |
| 1429 | for (pup = 0; pup < max_pup; pup++) { |
| 1430 | if (pup == (max_pup - 1) && dram_info->ecc_ena) |
| 1431 | phys_pup = ECC_PUP; |
| 1432 | else |
| 1433 | phys_pup = pup; |
| 1434 | |
| 1435 | /* |
| 1436 | * To minimize delay elements, inc from pbs value the min |
| 1437 | * pbs val |
| 1438 | */ |
| 1439 | pbs_min = MAX_PBS; |
| 1440 | pbs_max = 0; |
| 1441 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 1442 | if (pbs_min > skew_array[(pup * DQ_NUM) + dq]) |
| 1443 | pbs_min = skew_array[(pup * DQ_NUM) + dq]; |
| 1444 | |
| 1445 | if (pbs_max < skew_array[(pup * DQ_NUM) + dq]) |
| 1446 | pbs_max = skew_array[(pup * DQ_NUM) + dq]; |
| 1447 | } |
| 1448 | |
| 1449 | pbs_max -= pbs_min; |
| 1450 | |
| 1451 | DEBUG_PBS_FULL_S("DDR3 - PBS - PUP"); |
| 1452 | DEBUG_PBS_FULL_D(phys_pup, 1); |
| 1453 | DEBUG_PBS_FULL_S(": Min Val = "); |
| 1454 | DEBUG_PBS_FULL_D(pbs_min, 2); |
| 1455 | DEBUG_PBS_FULL_C(", Max Val = ", pbs_max, 2); |
| 1456 | |
| 1457 | val[pup] = 0; |
| 1458 | |
| 1459 | for (dq = 0; dq < DQ_NUM; dq++) { |
| 1460 | int idx; |
| 1461 | int offs; |
| 1462 | |
| 1463 | /* Set skew value for all dq */ |
| 1464 | /* |
| 1465 | * Bit# Deskew <- Bit# Deskew - last / first |
| 1466 | * failing bit Deskew For all bits (per PUP) |
| 1467 | * (minimize delay elements) |
| 1468 | */ |
| 1469 | |
| 1470 | DEBUG_PBS_FULL_S("DQ"); |
| 1471 | DEBUG_PBS_FULL_D(dq, 1); |
| 1472 | DEBUG_PBS_FULL_S("-"); |
| 1473 | DEBUG_PBS_FULL_D((skew_array[(pup * DQ_NUM) + dq] - |
| 1474 | pbs_min), 2); |
| 1475 | DEBUG_PBS_FULL_S(", "); |
| 1476 | |
| 1477 | idx = (pup * DQ_NUM) + dq; |
| 1478 | |
| 1479 | if (is_tx == 1) |
| 1480 | offs = PUP_PBS_TX; |
| 1481 | else |
| 1482 | offs = PUP_PBS_RX; |
| 1483 | |
| 1484 | ddr3_write_pup_reg(offs + pbs_dq_mapping[phys_pup][dq], |
| 1485 | CS0, phys_pup, 0, |
| 1486 | skew_array[idx] - pbs_min); |
| 1487 | |
| 1488 | if (is_tx == 1) |
| 1489 | val[pup] += skew_array[idx] - pbs_min; |
| 1490 | } |
| 1491 | |
| 1492 | DEBUG_PBS_FULL_S("\n"); |
| 1493 | |
| 1494 | /* Set the DQS the half of the Max PBS of the DQs */ |
| 1495 | if (is_tx == 1) { |
| 1496 | ddr3_write_pup_reg(PUP_PBS_TX + 8, CS0, phys_pup, 0, |
| 1497 | pbs_max / 2); |
| 1498 | ddr3_write_pup_reg(PUP_PBS_TX + 0xa, CS0, phys_pup, 0, |
| 1499 | val[pup] / 8); |
| 1500 | } else |
| 1501 | ddr3_write_pup_reg(PUP_PBS_RX + 8, CS0, phys_pup, 0, |
| 1502 | pbs_max / 2); |
| 1503 | } |
| 1504 | |
| 1505 | return MV_OK; |
| 1506 | } |
| 1507 | |
| 1508 | static void ddr3_pbs_write_pup_dqs_reg(u32 cs, u32 pup, u32 dqs_delay) |
| 1509 | { |
| 1510 | u32 reg, delay; |
| 1511 | |
| 1512 | reg = (ddr3_read_pup_reg(PUP_WL_MODE, cs, pup) & 0x3FF); |
| 1513 | delay = reg & PUP_DELAY_MASK; |
| 1514 | reg |= ((dqs_delay + delay) << REG_PHY_DQS_REF_DLY_OFFS); |
| 1515 | reg |= REG_PHY_REGISTRY_FILE_ACCESS_OP_WR; |
| 1516 | reg |= (pup << REG_PHY_PUP_OFFS); |
| 1517 | reg |= ((0x4 * cs + PUP_WL_MODE) << REG_PHY_CS_OFFS); |
| 1518 | |
| 1519 | reg_write(REG_PHY_REGISTRY_FILE_ACCESS_ADDR, reg); /* 0x16A0 */ |
| 1520 | do { |
| 1521 | reg = reg_read(REG_PHY_REGISTRY_FILE_ACCESS_ADDR) & |
| 1522 | REG_PHY_REGISTRY_FILE_ACCESS_OP_DONE; |
| 1523 | } while (reg); /* Wait for '0' to mark the end of the transaction */ |
| 1524 | |
| 1525 | udelay(10); |
| 1526 | } |
| 1527 | |
| 1528 | /* |
| 1529 | * Set training patterns |
| 1530 | */ |
| 1531 | int ddr3_load_pbs_patterns(MV_DRAM_INFO *dram_info) |
| 1532 | { |
| 1533 | u32 cs, cs_count, cs_tmp; |
| 1534 | u32 sdram_addr; |
| 1535 | u32 *pattern_ptr0, *pattern_ptr1; |
| 1536 | |
| 1537 | /* Choose pattern */ |
| 1538 | switch (dram_info->ddr_width) { |
| 1539 | #if defined(MV88F672X) |
| 1540 | case 16: |
| 1541 | pattern_ptr0 = (u32 *)&pbs_pattern[0]; |
| 1542 | pattern_ptr1 = (u32 *)&pbs_pattern[1]; |
| 1543 | break; |
| 1544 | #endif |
| 1545 | case 32: |
| 1546 | pattern_ptr0 = (u32 *)&pbs_pattern_32b[0]; |
| 1547 | pattern_ptr1 = (u32 *)&pbs_pattern_32b[1]; |
| 1548 | break; |
| 1549 | #if defined(MV88F78X60) |
| 1550 | case 64: |
| 1551 | pattern_ptr0 = (u32 *)&pbs_pattern_64b[0]; |
| 1552 | pattern_ptr1 = (u32 *)&pbs_pattern_64b[1]; |
| 1553 | break; |
| 1554 | #endif |
| 1555 | default: |
| 1556 | return MV_FAIL; |
| 1557 | } |
| 1558 | |
| 1559 | /* Loop for each CS */ |
| 1560 | for (cs = 0; cs < MAX_CS; cs++) { |
| 1561 | if (dram_info->cs_ena & (1 << cs)) { |
| 1562 | cs_count = 0; |
| 1563 | for (cs_tmp = 0; cs_tmp < cs; cs_tmp++) { |
| 1564 | if (dram_info->cs_ena & (1 << cs_tmp)) |
| 1565 | cs_count++; |
| 1566 | } |
| 1567 | |
| 1568 | /* Init PBS I pattern */ |
| 1569 | sdram_addr = (cs_count * (SDRAM_CS_SIZE + 1) + |
| 1570 | SDRAM_PBS_I_OFFS); |
| 1571 | if (MV_OK != |
| 1572 | ddr3_sdram_compare(dram_info, (u32) NULL, NULL, |
| 1573 | pattern_ptr0, LEN_STD_PATTERN, |
| 1574 | sdram_addr, 1, 0, NULL, |
| 1575 | 0)) |
| 1576 | return MV_FAIL; |
| 1577 | |
| 1578 | /* Init PBS II pattern */ |
| 1579 | sdram_addr = (cs_count * (SDRAM_CS_SIZE + 1) + |
| 1580 | SDRAM_PBS_II_OFFS); |
| 1581 | if (MV_OK != |
| 1582 | ddr3_sdram_compare(dram_info, (u32) NULL, NULL, |
| 1583 | pattern_ptr1, LEN_STD_PATTERN, |
| 1584 | sdram_addr, 1, 0, NULL, |
| 1585 | 0)) |
| 1586 | return MV_FAIL; |
| 1587 | } |
| 1588 | } |
| 1589 | |
| 1590 | return MV_OK; |
| 1591 | } |
| 1592 | #endif |