blob: 5a062260fe8d49e026d31a3822d1b03f56a228a0 [file] [log] [blame]
Tim Harvey7412d9d2014-06-02 16:13:19 -07001/*
2 * Copyright (C) 2014 Gateworks Corporation
3 * Author: Tim Harvey <tharvey@gateworks.com>
4 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7#ifndef __IMX6_SPL_CONFIG_H
8#define __IMX6_SPL_CONFIG_H
9
10#ifdef CONFIG_SPL
Tim Harvey7412d9d2014-06-02 16:13:19 -070011/*
12 * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals:
13 * - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF
14 * - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as well
15 * - BOOT ROM stack is at 0x0091FFB8
16 * - if icache/dcache is enabled (eFuse/strapping controlled) then the
17 * IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to
18 * fit between 0x00907000 and 0x00918000.
19 * - Additionally the BOOT ROM loads what they consider the firmware image
20 * which consists of a 4K header in front of us that contains the IVT, DCD
21 * and some padding thus 'our' max size is really 0x00908000 - 0x00918000
22 * or 64KB
23 */
Tim Harvey7412d9d2014-06-02 16:13:19 -070024#define CONFIG_SPL_TEXT_BASE 0x00908000
Marek Vasut408368f2014-10-24 23:39:07 +020025#define CONFIG_SPL_MAX_SIZE 0x10000
Tim Harvey7412d9d2014-06-02 16:13:19 -070026#define CONFIG_SPL_STACK 0x0091FFB8
Stefan Agner003b63b2016-11-15 10:38:23 -080027/*
28 * Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the
29 * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a
30 * boot media (given that boot media specific offset is configured properly).
31 */
32#define CONFIG_SPL_PAD_TO 0x11000
Tim Harvey7412d9d2014-06-02 16:13:19 -070033
Tim Harvey7412d9d2014-06-02 16:13:19 -070034/* MMC support */
35#if defined(CONFIG_SPL_MMC_SUPPORT)
Paul Kocialkowski341e8cd2014-11-08 23:14:55 +010036#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
Semen Protsenkod776ecf2016-11-16 19:19:06 +020037#define CONFIG_SYS_MONITOR_LEN 409600 /* 400 KB */
Tim Harvey7412d9d2014-06-02 16:13:19 -070038#endif
39
40/* SATA support */
41#if defined(CONFIG_SPL_SATA_SUPPORT)
42#define CONFIG_SPL_SATA_BOOT_DEVICE 0
43#define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1
44#endif
45
46/* Define the payload for FAT/EXT support */
47#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
Jagan Teki04e2ed32017-06-01 22:58:34 +053048# ifdef CONFIG_OF_CONTROL
49# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
50# else
51# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
52# endif
Tim Harvey7412d9d2014-06-02 16:13:19 -070053#endif
54
Fabio Estevam1b691df2018-01-03 12:33:05 -020055#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || \
56 defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
Peng Fan327083c2014-12-30 17:24:02 +080057#define CONFIG_SPL_BSS_START_ADDR 0x88200000
Marek Vasut75801c12015-11-20 21:43:24 +010058#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
Peng Fan327083c2014-12-30 17:24:02 +080059#define CONFIG_SYS_SPL_MALLOC_START 0x88300000
Marek Vasut75801c12015-11-20 21:43:24 +010060#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
Peng Fan327083c2014-12-30 17:24:02 +080061#else
Tim Harvey7412d9d2014-06-02 16:13:19 -070062#define CONFIG_SPL_BSS_START_ADDR 0x18200000
63#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
64#define CONFIG_SYS_SPL_MALLOC_START 0x18300000
Marek Vasut75801c12015-11-20 21:43:24 +010065#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
Tim Harvey7412d9d2014-06-02 16:13:19 -070066#endif
Peng Fan327083c2014-12-30 17:24:02 +080067#endif
Tim Harvey7412d9d2014-06-02 16:13:19 -070068
69#endif