blob: c9742f37f4d8daa0f6854e64d4f1cb7eb9ebbd2c [file] [log] [blame]
Thomas Chou7fdee742015-11-09 14:45:06 +08001/*
2 * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
3 * Scott McNutt <smcnutt@psyent.com>
4 * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9#ifndef __CONFIG_H
10#define __CONFIG_H
11
12/*
13 * BOARD/CPU
14 */
Thomas Chou7fdee742015-11-09 14:45:06 +080015#define CONFIG_DISPLAY_BOARDINFO_LATE
16
17/*
18 * SERIAL
19 */
Thomas Chou8e27fd62015-11-19 21:48:15 +080020#define CONFIG_SYS_NS16550_MEM32
Thomas Chou7fdee742015-11-09 14:45:06 +080021
22/*
23 * Flash
24 */
25#define CONFIG_SYS_MAX_FLASH_BANKS 1
26#define CONFIG_SYS_MAX_FLASH_SECT 1024
27#define CONFIG_MTD_DEVICE
28
29/*
30 * NET options
31 */
32#define CONFIG_SYS_RX_ETH_BUFFER 0
Thomas Chou7fdee742015-11-09 14:45:06 +080033#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
34#define CONFIG_PHY_MARVELL
35
36/*
37 * BOOTP options
38 */
39#define CONFIG_BOOTP_BOOTFILESIZE
Thomas Chou7fdee742015-11-09 14:45:06 +080040
41/*
42 * FDT options
43 */
Thomas Chou7fdee742015-11-09 14:45:06 +080044#define CONFIG_LMB
45
46/*
Thomas Chou7fdee742015-11-09 14:45:06 +080047 * MEMORY ORGANIZATION
48 * -Monitor at top of sdram.
49 * -The heap is placed below the monitor
50 * -The stack is placed below the heap (&grows down).
51 */
52#define CONFIG_SYS_SDRAM_BASE 0xc8000000
53#define CONFIG_SYS_SDRAM_SIZE 0x08000000
54#define CONFIG_NR_DRAM_BANKS 1
55#define CONFIG_MONITOR_IS_IN_RAM
Marek Vasut307c7152015-12-15 03:09:23 +010056#define CONFIG_SYS_MONITOR_LEN 0x80000 /* Reserve 512k */
Thomas Chou7fdee742015-11-09 14:45:06 +080057#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
58 CONFIG_SYS_SDRAM_SIZE - \
59 CONFIG_SYS_MONITOR_LEN)
60#define CONFIG_SYS_MALLOC_LEN 0x20000
61
62/*
Marek Vasuta979a6d2015-12-15 03:09:22 +010063 * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
64 * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
65 * reset address, no? This will keep the environment in user region
66 * of flash. NOTE: the monitor length must be multiple of sector size
67 * (which is common practice).
68 */
Marek Vasuta979a6d2015-12-15 03:09:22 +010069
70#define CONFIG_ENV_SIZE 0x10000 /* 64k, 1 sector */
71#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
72#define CONFIG_ENV_ADDR (0xf4000000 + CONFIG_SYS_MONITOR_LEN)
73
74/*
Thomas Chou7fdee742015-11-09 14:45:06 +080075 * MISC
76 */
Marek Vasutd32b2af2015-12-15 03:09:24 +010077#define CONFIG_SYS_LOAD_ADDR 0xcc000000 /* Half of RAM */
78#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
Thomas Chou7fdee742015-11-09 14:45:06 +080079#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
80#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MONITOR_BASE - \
81 CONFIG_ENV_SIZE - \
82 CONFIG_SYS_MALLOC_LEN - \
83 0x10000)
Thomas Chou7fdee742015-11-09 14:45:06 +080084
85#endif /* __CONFIG_H */