Eddy Petrișor | 5178dc1 | 2016-06-05 03:43:00 +0300 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2015, Freescale Semiconductor, Inc. |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 5 | */ |
| 6 | |
| 7 | #include <asm/io.h> |
| 8 | #include <asm/arch/imx-regs.h> |
| 9 | #include <asm/arch/siul.h> |
| 10 | #include <asm/arch/lpddr2.h> |
| 11 | #include <asm/arch/mmdc.h> |
| 12 | |
| 13 | volatile int mscr_offset_ck0; |
| 14 | |
| 15 | void lpddr2_config_iomux(uint8_t module) |
| 16 | { |
| 17 | int i; |
| 18 | |
| 19 | switch (module) { |
| 20 | case DDR0: |
| 21 | mscr_offset_ck0 = SIUL2_MSCRn(_DDR0_CKE0); |
| 22 | writel(LPDDR2_CLK0_PAD, SIUL2_MSCRn(_DDR0_CLK0)); |
| 23 | |
| 24 | writel(LPDDR2_CKEn_PAD, SIUL2_MSCRn(_DDR0_CKE0)); |
| 25 | writel(LPDDR2_CKEn_PAD, SIUL2_MSCRn(_DDR0_CKE1)); |
| 26 | |
| 27 | writel(LPDDR2_CS_Bn_PAD, SIUL2_MSCRn(_DDR0_CS_B0)); |
| 28 | writel(LPDDR2_CS_Bn_PAD, SIUL2_MSCRn(_DDR0_CS_B1)); |
| 29 | |
| 30 | for (i = _DDR0_DM0; i <= _DDR0_DM3; i++) |
| 31 | writel(LPDDR2_DMn_PAD, SIUL2_MSCRn(i)); |
| 32 | |
| 33 | for (i = _DDR0_DQS0; i <= _DDR0_DQS3; i++) |
| 34 | writel(LPDDR2_DQSn_PAD, SIUL2_MSCRn(i)); |
| 35 | |
| 36 | for (i = _DDR0_A0; i <= _DDR0_A9; i++) |
| 37 | writel(LPDDR2_An_PAD, SIUL2_MSCRn(i)); |
| 38 | |
| 39 | for (i = _DDR0_D0; i <= _DDR0_D31; i++) |
| 40 | writel(LPDDR2_Dn_PAD, SIUL2_MSCRn(i)); |
| 41 | break; |
| 42 | case DDR1: |
| 43 | writel(LPDDR2_CLK0_PAD, SIUL2_MSCRn(_DDR1_CLK0)); |
| 44 | |
| 45 | writel(LPDDR2_CKEn_PAD, SIUL2_MSCRn(_DDR1_CKE0)); |
| 46 | writel(LPDDR2_CKEn_PAD, SIUL2_MSCRn(_DDR1_CKE1)); |
| 47 | |
| 48 | writel(LPDDR2_CS_Bn_PAD, SIUL2_MSCRn(_DDR1_CS_B0)); |
| 49 | writel(LPDDR2_CS_Bn_PAD, SIUL2_MSCRn(_DDR1_CS_B1)); |
| 50 | |
| 51 | for (i = _DDR1_DM0; i <= _DDR1_DM3; i++) |
| 52 | writel(LPDDR2_DMn_PAD, SIUL2_MSCRn(i)); |
| 53 | |
| 54 | for (i = _DDR1_DQS0; i <= _DDR1_DQS3; i++) |
| 55 | writel(LPDDR2_DQSn_PAD, SIUL2_MSCRn(i)); |
| 56 | |
| 57 | for (i = _DDR1_A0; i <= _DDR1_A9; i++) |
| 58 | writel(LPDDR2_An_PAD, SIUL2_MSCRn(i)); |
| 59 | |
| 60 | for (i = _DDR1_D0; i <= _DDR1_D31; i++) |
| 61 | writel(LPDDR2_Dn_PAD, SIUL2_MSCRn(i)); |
| 62 | break; |
| 63 | } |
| 64 | } |
| 65 | |
| 66 | void config_mmdc(uint8_t module) |
| 67 | { |
| 68 | unsigned long mmdc_addr = (module) ? MMDC1_BASE_ADDR : MMDC0_BASE_ADDR; |
| 69 | |
| 70 | writel(MMDC_MDSCR_CFG_VALUE, mmdc_addr + MMDC_MDSCR); |
| 71 | |
| 72 | writel(MMDC_MDCFG0_VALUE, mmdc_addr + MMDC_MDCFG0); |
| 73 | writel(MMDC_MDCFG1_VALUE, mmdc_addr + MMDC_MDCFG1); |
| 74 | writel(MMDC_MDCFG2_VALUE, mmdc_addr + MMDC_MDCFG2); |
| 75 | writel(MMDC_MDCFG3LP_VALUE, mmdc_addr + MMDC_MDCFG3LP); |
| 76 | writel(MMDC_MDOTC_VALUE, mmdc_addr + MMDC_MDOTC); |
| 77 | writel(MMDC_MDMISC_VALUE, mmdc_addr + MMDC_MDMISC); |
| 78 | writel(MMDC_MDOR_VALUE, mmdc_addr + MMDC_MDOR); |
| 79 | writel(_MDCTL, mmdc_addr + MMDC_MDCTL); |
| 80 | |
| 81 | writel(MMDC_MPMUR0_VALUE, mmdc_addr + MMDC_MPMUR0); |
| 82 | |
| 83 | while (readl(mmdc_addr + MMDC_MPMUR0) & MMDC_MPMUR0_FRC_MSR) { |
| 84 | } |
| 85 | |
| 86 | writel(MMDC_MDSCR_RST_VALUE, mmdc_addr + MMDC_MDSCR); |
| 87 | |
| 88 | /* Perform ZQ calibration */ |
| 89 | writel(MMDC_MPZQLP2CTL_VALUE, mmdc_addr + MMDC_MPZQLP2CTL); |
| 90 | writel(MMDC_MPZQHWCTRL_VALUE, mmdc_addr + MMDC_MPZQHWCTRL); |
| 91 | while (readl(mmdc_addr + MMDC_MPZQHWCTRL) & MMDC_MPZQHWCTRL_ZQ_HW_FOR) { |
| 92 | } |
| 93 | |
| 94 | /* Enable MMDC with CS0 */ |
| 95 | writel(_MDCTL + 0x80000000, mmdc_addr + MMDC_MDCTL); |
| 96 | |
| 97 | /* Complete the initialization sequence as defined by JEDEC */ |
| 98 | writel(MMDC_MDSCR_MR1_VALUE, mmdc_addr + MMDC_MDSCR); |
| 99 | writel(MMDC_MDSCR_MR2_VALUE, mmdc_addr + MMDC_MDSCR); |
| 100 | writel(MMDC_MDSCR_MR3_VALUE, mmdc_addr + MMDC_MDSCR); |
| 101 | writel(MMDC_MDSCR_MR10_VALUE, mmdc_addr + MMDC_MDSCR); |
| 102 | |
| 103 | /* Set the amount of DRAM */ |
| 104 | /* Set DQS settings based on board type */ |
| 105 | |
| 106 | switch (module) { |
| 107 | case MMDC0: |
| 108 | writel(MMDC_MDASP_MODULE0_VALUE, mmdc_addr + MMDC_MDASP); |
| 109 | writel(MMDC_MPRDDLCTL_MODULE0_VALUE, |
| 110 | mmdc_addr + MMDC_MPRDDLCTL); |
| 111 | writel(MMDC_MPWRDLCTL_MODULE0_VALUE, |
| 112 | mmdc_addr + MMDC_MPWRDLCTL); |
| 113 | writel(MMDC_MPDGCTRL0_MODULE0_VALUE, |
| 114 | mmdc_addr + MMDC_MPDGCTRL0); |
| 115 | writel(MMDC_MPDGCTRL1_MODULE0_VALUE, |
| 116 | mmdc_addr + MMDC_MPDGCTRL1); |
| 117 | break; |
| 118 | case MMDC1: |
| 119 | writel(MMDC_MDASP_MODULE1_VALUE, mmdc_addr + MMDC_MDASP); |
| 120 | writel(MMDC_MPRDDLCTL_MODULE1_VALUE, |
| 121 | mmdc_addr + MMDC_MPRDDLCTL); |
| 122 | writel(MMDC_MPWRDLCTL_MODULE1_VALUE, |
| 123 | mmdc_addr + MMDC_MPWRDLCTL); |
| 124 | writel(MMDC_MPDGCTRL0_MODULE1_VALUE, |
| 125 | mmdc_addr + MMDC_MPDGCTRL0); |
| 126 | writel(MMDC_MPDGCTRL1_MODULE1_VALUE, |
| 127 | mmdc_addr + MMDC_MPDGCTRL1); |
| 128 | break; |
| 129 | } |
| 130 | |
| 131 | writel(MMDC_MDRWD_VALUE, mmdc_addr + MMDC_MDRWD); |
| 132 | writel(MMDC_MDPDC_VALUE, mmdc_addr + MMDC_MDPDC); |
| 133 | writel(MMDC_MDREF_VALUE, mmdc_addr + MMDC_MDREF); |
| 134 | writel(MMDC_MPODTCTRL_VALUE, mmdc_addr + MMDC_MPODTCTRL); |
| 135 | writel(MMDC_MDSCR_DEASSERT_VALUE, mmdc_addr + MMDC_MDSCR); |
| 136 | |
| 137 | } |