Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 8c4e304d7e917ed1bc5e365779c16445f92a4521 / . / arch / arm / dts / rk3566-anbernic-rgxx3.dtsi
blob: ad43fa199ca553d3c5339dd31029dede3cc2e3fe [file] [log] [blame]
Chris Morgan8c4e3042023-04-21 10:59:19 -0500[diff] [blame^]1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2
3/dts-v1/;
4
5#include <dt-bindings/gpio/gpio.h>
6#include <dt-bindings/input/linux-event-codes.h>
7#include <dt-bindings/leds/common.h>
8#include <dt-bindings/pinctrl/rockchip.h>
9#include <dt-bindings/soc/rockchip,vop2.h>
10#include "rk3566.dtsi"
11
12/ {
13 chosen: chosen {
14 stdout-path = "serial2:1500000n8";
15 };
16
17 adc-joystick {
18 compatible = "adc-joystick";
19 io-channels = <&adc_mux 0>,
20 <&adc_mux 1>,
21 <&adc_mux 2>,
22 <&adc_mux 3>;
23 pinctrl-0 = <&joy_mux_en>;
24 pinctrl-names = "default";
25 poll-interval = <60>;
26 #address-cells = <1>;
27 #size-cells = <0>;
28
29 axis@0 {
30 reg = <0>;
31 abs-flat = <32>;
32 abs-fuzz = <32>;
33 abs-range = <1023 15>;
34 linux,code = <ABS_X>;
35 };
36
37 axis@1 {
38 reg = <1>;
39 abs-flat = <32>;
40 abs-fuzz = <32>;
41 abs-range = <15 1023>;
42 linux,code = <ABS_RX>;
43 };
44
45 axis@2 {
46 reg = <2>;
47 abs-flat = <32>;
48 abs-fuzz = <32>;
49 abs-range = <15 1023>;
50 linux,code = <ABS_Y>;
51 };
52
53 axis@3 {
54 reg = <3>;
55 abs-flat = <32>;
56 abs-fuzz = <32>;
57 abs-range = <1023 15>;
58 linux,code = <ABS_RY>;
59 };
60 };
61
62 adc_keys: adc-keys {
63 compatible = "adc-keys";
64 io-channels = <&saradc 0>;
65 io-channel-names = "buttons";
66 keyup-threshold-microvolt = <1800000>;
67 poll-interval = <60>;
68
69 /*
70 * Button is mapped to F key in BSP kernel, but
71 * according to input guidelines it should be mode.
72 */
73 button-mode {
74 label = "MODE";
75 linux,code = <BTN_MODE>;
76 press-threshold-microvolt = <1750>;
77 };
78 };
79
80 adc_mux: adc-mux {
81 compatible = "io-channel-mux";
82 channels = "left_x", "right_x", "left_y", "right_y";
83 #io-channel-cells = <1>;
84 io-channels = <&saradc 3>;
85 io-channel-names = "parent";
86 mux-controls = <&gpio_mux>;
87 settle-time-us = <100>;
88 };
89
90 gpio_keys_control: gpio-keys-control {
91 compatible = "gpio-keys";
92 pinctrl-0 = <&btn_pins_ctrl>;
93 pinctrl-names = "default";
94
95 button-b {
96 gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
97 label = "SOUTH";
98 linux,code = <BTN_SOUTH>;
99 };
100
101 button-down {
102 gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
103 label = "DPAD-DOWN";
104 linux,code = <BTN_DPAD_DOWN>;
105 };
106
107 button-l1 {
108 gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
109 label = "TL";
110 linux,code = <BTN_TL>;
111 };
112
113 button-l2 {
114 gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
115 label = "TL2";
116 linux,code = <BTN_TL2>;
117 };
118
119 button-select {
120 gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
121 label = "SELECT";
122 linux,code = <BTN_SELECT>;
123 };
124
125 button-start {
126 gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
127 label = "START";
128 linux,code = <BTN_START>;
129 };
130
131 button-thumbl {
132 gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
133 label = "THUMBL";
134 linux,code = <BTN_THUMBL>;
135 };
136
137 button-thumbr {
138 gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
139 label = "THUMBR";
140 linux,code = <BTN_THUMBR>;
141 };
142
143 button-up {
144 gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
145 label = "DPAD-UP";
146 linux,code = <BTN_DPAD_UP>;
147 };
148
149 button-x {
150 gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
151 label = "NORTH";
152 linux,code = <BTN_NORTH>;
153 };
154 };
155
156 gpio_keys_vol: gpio-keys-vol {
157 compatible = "gpio-keys";
158 autorepeat;
159 pinctrl-0 = <&btn_pins_vol>;
160 pinctrl-names = "default";
161
162 button-vol-down {
163 gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
164 label = "VOLUMEDOWN";
165 linux,code = <KEY_VOLUMEDOWN>;
166 };
167
168 button-vol-up {
169 gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
170 label = "VOLUMEUP";
171 linux,code = <KEY_VOLUMEUP>;
172 };
173 };
174
175 gpio_mux: mux-controller {
176 compatible = "gpio-mux";
177 mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
178 <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
179 #mux-control-cells = <0>;
180 };
181
182 hdmi-con {
183 compatible = "hdmi-connector";
184 ddc-i2c-bus = <&i2c5>;
185 type = "c";
186
187 port {
188 hdmi_con_in: endpoint {
189 remote-endpoint = <&hdmi_out_con>;
190 };
191 };
192 };
193
194 leds: gpio-leds {
195 compatible = "gpio-leds";
196 pinctrl-0 = <&led_pins>;
197 pinctrl-names = "default";
198
199 green_led: led-0 {
200 color = <LED_COLOR_ID_GREEN>;
201 default-state = "on";
202 function = LED_FUNCTION_POWER;
203 gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
204 };
205
206 amber_led: led-1 {
207 color = <LED_COLOR_ID_AMBER>;
208 function = LED_FUNCTION_CHARGING;
209 gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
210 retain-state-suspended;
211 };
212
213 red_led: led-2 {
214 color = <LED_COLOR_ID_RED>;
215 default-state = "off";
216 function = LED_FUNCTION_STATUS;
217 gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
218 };
219 };
220
221 sdio_pwrseq: sdio-pwrseq {
222 compatible = "mmc-pwrseq-simple";
223 clocks = <&rk817 1>;
224 clock-names = "ext_clock";
225 pinctrl-0 = <&wifi_enable_h>;
226 pinctrl-names = "default";
227 post-power-on-delay-ms = <200>;
228 reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
229 };
230
231 vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 {
232 compatible = "regulator-fixed";
233 gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
234 enable-active-high;
235 pinctrl-0 = <&vcc_lcd_h>;
236 pinctrl-names = "default";
237 regulator-boot-on;
238 regulator-min-microvolt = <3300000>;
239 regulator-max-microvolt = <3300000>;
240 regulator-name = "vcc3v3_lcd0_n";
241 vin-supply = <&vcc_3v3>;
242 regulator-state-mem {
243 regulator-off-in-suspend;
244 };
245 };
246
247 vcc_sys: regulator-vcc-sys {
248 compatible = "regulator-fixed";
249 regulator-always-on;
250 regulator-boot-on;
251 regulator-min-microvolt = <3800000>;
252 regulator-max-microvolt = <3800000>;
253 regulator-name = "vcc_sys";
254 };
255
256 vcc_wifi: regulator-vcc-wifi {
257 compatible = "regulator-fixed";
258 enable-active-high;
259 gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
260 pinctrl-0 = <&vcc_wifi_h>;
261 pinctrl-names = "default";
262 regulator-always-on;
263 regulator-boot-on;
264 regulator-min-microvolt = <3300000>;
265 regulator-max-microvolt = <3300000>;
266 regulator-name = "vcc_wifi";
267 };
268
269 vibrator: pwm-vibrator {
270 compatible = "pwm-vibrator";
271 pwm-names = "enable";
272 pwms = <&pwm5 0 1000000000 0>;
273 };
274};
275
276&combphy1 {
277 status = "okay";
278};
279
280&cpu0 {
281 cpu-supply = <&vdd_cpu>;
282};
283
284&cpu1 {
285 cpu-supply = <&vdd_cpu>;
286};
287
288&cpu2 {
289 cpu-supply = <&vdd_cpu>;
290};
291
292&cpu3 {
293 cpu-supply = <&vdd_cpu>;
294};
295
296&gpu {
297 mali-supply = <&vdd_gpu>;
298 status = "okay";
299};
300
301&hdmi {
302 ddc-i2c-bus = <&i2c5>;
303 pinctrl-0 = <&hdmitxm0_cec>;
304 pinctrl-names = "default";
305 status = "okay";
306};
307
308&hdmi_in {
309 hdmi_in_vp0: endpoint {
310 remote-endpoint = <&vp0_out_hdmi>;
311 };
312};
313
314&hdmi_out {
315 hdmi_out_con: endpoint {
316 remote-endpoint = <&hdmi_con_in>;
317 };
318};
319
320&hdmi_sound {
321 status = "okay";
322};
323
324&i2c0 {
325 status = "okay";
326
327 rk817: pmic@20 {
328 compatible = "rockchip,rk817";
329 reg = <0x20>;
330 interrupt-parent = <&gpio0>;
331 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
332 clock-output-names = "rk808-clkout1", "rk808-clkout2";
333 clock-names = "mclk";
334 clocks = <&cru I2S1_MCLKOUT_TX>;
335 assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
336 assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
337 #clock-cells = <1>;
338 #sound-dai-cells = <0>;
339 pinctrl-names = "default";
340 pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
341 wakeup-source;
342
343 vcc1-supply = <&vcc_sys>;
344 vcc2-supply = <&vcc_sys>;
345 vcc3-supply = <&vcc_sys>;
346 vcc4-supply = <&vcc_sys>;
347 vcc5-supply = <&vcc_sys>;
348 vcc6-supply = <&vcc_sys>;
349 vcc7-supply = <&vcc_sys>;
350 vcc8-supply = <&vcc_sys>;
351 vcc9-supply = <&dcdc_boost>;
352
353 regulators {
354 vdd_logic: DCDC_REG1 {
355 regulator-always-on;
356 regulator-boot-on;
357 regulator-min-microvolt = <500000>;
358 regulator-max-microvolt = <1350000>;
359 regulator-init-microvolt = <900000>;
360 regulator-ramp-delay = <6001>;
361 regulator-initial-mode = <0x2>;
362 regulator-name = "vdd_logic";
363 regulator-state-mem {
364 regulator-off-in-suspend;
365 regulator-suspend-microvolt = <900000>;
366 };
367 };
368
369 vdd_gpu: DCDC_REG2 {
370 regulator-always-on;
371 regulator-boot-on;
372 regulator-min-microvolt = <500000>;
373 regulator-max-microvolt = <1350000>;
374 regulator-init-microvolt = <900000>;
375 regulator-ramp-delay = <6001>;
376 regulator-initial-mode = <0x2>;
377 regulator-name = "vdd_gpu";
378 regulator-state-mem {
379 regulator-off-in-suspend;
380 };
381 };
382
383 vcc_ddr: DCDC_REG3 {
384 regulator-always-on;
385 regulator-boot-on;
386 regulator-initial-mode = <0x2>;
387 regulator-name = "vcc_ddr";
388 regulator-state-mem {
389 regulator-on-in-suspend;
390 };
391 };
392
393 vcc_3v3: DCDC_REG4 {
394 regulator-always-on;
395 regulator-boot-on;
396 regulator-min-microvolt = <3300000>;
397 regulator-max-microvolt = <3300000>;
398 regulator-initial-mode = <0x2>;
399 regulator-name = "vcc_3v3";
400 regulator-state-mem {
401 regulator-on-in-suspend;
402 regulator-suspend-microvolt = <3300000>;
403 };
404 };
405
406 vcca1v8_pmu: LDO_REG1 {
407 regulator-always-on;
408 regulator-boot-on;
409 regulator-min-microvolt = <1800000>;
410 regulator-max-microvolt = <1800000>;
411 regulator-name = "vcca1v8_pmu";
412 regulator-state-mem {
413 regulator-on-in-suspend;
414 regulator-suspend-microvolt = <1800000>;
415 };
416 };
417
418 vdda_0v9: LDO_REG2 {
419 regulator-always-on;
420 regulator-boot-on;
421 regulator-min-microvolt = <900000>;
422 regulator-max-microvolt = <900000>;
423 regulator-name = "vdda_0v9";
424 regulator-state-mem {
425 regulator-off-in-suspend;
426 };
427 };
428
429 vdda0v9_pmu: LDO_REG3 {
430 regulator-always-on;
431 regulator-boot-on;
432 regulator-min-microvolt = <900000>;
433 regulator-max-microvolt = <900000>;
434 regulator-name = "vdda0v9_pmu";
435 regulator-state-mem {
436 regulator-on-in-suspend;
437 regulator-suspend-microvolt = <900000>;
438 };
439 };
440
441 vccio_acodec: LDO_REG4 {
442 regulator-always-on;
443 regulator-boot-on;
444 regulator-min-microvolt = <3300000>;
445 regulator-max-microvolt = <3300000>;
446 regulator-name = "vccio_acodec";
447 regulator-state-mem {
448 regulator-off-in-suspend;
449 };
450 };
451
452 vccio_sd: LDO_REG5 {
453 regulator-always-on;
454 regulator-boot-on;
455 regulator-min-microvolt = <1800000>;
456 regulator-max-microvolt = <3300000>;
457 regulator-name = "vccio_sd";
458 regulator-state-mem {
459 regulator-off-in-suspend;
460 };
461 };
462
463 vcc3v3_pmu: LDO_REG6 {
464 regulator-always-on;
465 regulator-boot-on;
466 regulator-min-microvolt = <3300000>;
467 regulator-max-microvolt = <3300000>;
468 regulator-name = "vcc3v3_pmu";
469 regulator-state-mem {
470 regulator-on-in-suspend;
471 regulator-suspend-microvolt = <3300000>;
472 };
473 };
474
475 vcc_1v8: LDO_REG7 {
476 regulator-always-on;
477 regulator-boot-on;
478 regulator-min-microvolt = <1800000>;
479 regulator-max-microvolt = <1800000>;
480 regulator-name = "vcc_1v8";
481 regulator-state-mem {
482 regulator-off-in-suspend;
483 };
484 };
485
486 vcc1v8_dvp: LDO_REG8 {
487 regulator-always-on;
488 regulator-boot-on;
489 regulator-min-microvolt = <1800000>;
490 regulator-max-microvolt = <3300000>;
491 regulator-name = "vcc1v8_dvp";
492 regulator-state-mem {
493 regulator-off-in-suspend;
494 };
495 };
496
497 vcc2v8_dvp: LDO_REG9 {
498 regulator-always-on;
499 regulator-boot-on;
500 regulator-min-microvolt = <2800000>;
501 regulator-max-microvolt = <2800000>;
502 regulator-name = "vcc2v8_dvp";
503 regulator-state-mem {
504 regulator-off-in-suspend;
505 };
506 };
507
508 dcdc_boost: BOOST {
509 regulator-always-on;
510 regulator-boot-on;
511 regulator-min-microvolt = <4700000>;
512 regulator-max-microvolt = <5400000>;
513 regulator-name = "boost";
514 regulator-state-mem {
515 regulator-off-in-suspend;
516 };
517 };
518
519 otg_switch: OTG_SWITCH {
520 regulator-name = "otg_switch";
521 regulator-state-mem {
522 regulator-off-in-suspend;
523 };
524 };
525 };
526 };
527
528 vdd_cpu: regulator@40 {
529 compatible = "fcs,fan53555";
530 reg = <0x40>;
531 fcs,suspend-voltage-selector = <1>;
532 regulator-always-on;
533 regulator-boot-on;
534 regulator-min-microvolt = <712500>;
535 regulator-max-microvolt = <1390000>;
536 regulator-init-microvolt = <900000>;
537 regulator-name = "vdd_cpu";
538 regulator-ramp-delay = <2300>;
539 vin-supply = <&vcc_sys>;
540 regulator-state-mem {
541 regulator-off-in-suspend;
542 };
543 };
544};
545
546&i2c1 {
547 /* Unknown/unused device at 0x3c */
548 status = "disabled";
549};
550
551&i2c5 {
552 pinctrl-0 = <&i2c5m1_xfer>;
553 pinctrl-names = "default";
554 status = "okay";
555};
556
557&i2s0_8ch {
558 status = "okay";
559};
560
561&i2s1_8ch {
562 pinctrl-0 = <&i2s1m0_sclktx
563 &i2s1m0_lrcktx
564 &i2s1m0_sdi0
565 &i2s1m0_sdo0>;
566 pinctrl-names = "default";
567 rockchip,trcm-sync-tx-only;
568 status = "okay";
569};
570
571&pinctrl {
572 gpio-btns {
573 btn_pins_ctrl: btn-pins-ctrl {
574 rockchip,pins =
575 <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
576 <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
577 <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
578 <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
579 <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
580 <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
581 <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
582 <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
583 <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
584 <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
585 <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
586 <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
587 <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>,
588 <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
589 <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>,
590 <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
591 };
592
593 btn_pins_vol: btn-pins-vol {
594 rockchip,pins =
595 <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
596 <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
597 };
598 };
599
600 gpio-led {
601 led_pins: led-pins {
602 rockchip,pins =
603 <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>,
604 <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>,
605 <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
606 };
607 };
608
609 joy-mux {
610 joy_mux_en: joy-mux-en {
611 rockchip,pins =
612 <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
613 };
614 };
615
616 pmic {
617 pmic_int_l: pmic-int-l {
618 rockchip,pins =
619 <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
620 };
621 };
622
623 sdio-pwrseq {
624 wifi_enable_h: wifi-enable-h {
625 rockchip,pins =
626 <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
627 };
628 };
629
630 vcc3v3-lcd {
631 vcc_lcd_h: vcc-lcd-h {
632 rockchip,pins =
633 <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
634 };
635 };
636
637 vcc-wifi {
638 vcc_wifi_h: vcc-wifi-h {
639 rockchip,pins =
640 <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
641 };
642 };
643};
644
645&pmu_io_domains {
646 status = "okay";
647 pmuio1-supply = <&vcc3v3_pmu>;
648 pmuio2-supply = <&vcc3v3_pmu>;
649 vccio1-supply = <&vccio_acodec>;
650 vccio3-supply = <&vccio_sd>;
651 vccio4-supply = <&vcc_1v8>;
652 vccio5-supply = <&vcc_3v3>;
653 vccio6-supply = <&vcc1v8_dvp>;
654 vccio7-supply = <&vcc_3v3>;
655};
656
657&pwm5 {
658 status = "okay";
659};
660
661&saradc {
662 vref-supply = <&vcc_1v8>;
663 status = "okay";
664};
665
666&sdmmc0 {
667 bus-width = <4>;
668 cap-sd-highspeed;
669 cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
670 disable-wp;
671 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
672 pinctrl-names = "default";
673 sd-uhs-sdr104;
674 vmmc-supply = <&vcc_3v3>;
675 vqmmc-supply = <&vccio_sd>;
676 status = "okay";
677};
678
679&sdmmc1 {
680 bus-width = <4>;
681 cap-sd-highspeed;
682 cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
683 disable-wp;
684 pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>;
685 pinctrl-names = "default";
686 sd-uhs-sdr104;
687 vmmc-supply = <&vcc_3v3>;
688 vqmmc-supply = <&vcc1v8_dvp>;
689 status = "okay";
690};
691
692&sdmmc2 {
693 bus-width = <4>;
694 cap-sd-highspeed;
695 cap-sdio-irq;
696 keep-power-in-suspend;
697 mmc-pwrseq = <&sdio_pwrseq>;
698 non-removable;
699 pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
700 pinctrl-names = "default";
701 vmmc-supply = <&vcc_wifi>;
702 vqmmc-supply = <&vcca1v8_pmu>;
703 status = "okay";
704};
705
706&tsadc {
707 rockchip,hw-tshut-mode = <1>;
708 rockchip,hw-tshut-polarity = <0>;
709 status = "okay";
710};
711
712&uart1 {
713 pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
714 pinctrl-names = "default";
715 uart-has-rtscts;
716 status = "okay";
717
718 bluetooth {
719 compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
720 device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
721 enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
722 host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
723 };
724};
725
726&uart2 {
727 status = "okay";
728};
729
730/*
731 * Lack the schematics to verify, but port works as a peripheral
732 * (and not a host or OTG port).
733 */
734&usb_host0_xhci {
735 dr_mode = "peripheral";
736 phys = <&usb2phy0_otg>;
737 phy-names = "usb2-phy";
738 status = "okay";
739};
740
741&usb_host1_ehci {
742 status = "okay";
743};
744
745&usb_host1_ohci {
746 status = "okay";
747};
748
749&usb_host1_xhci {
750 phy-names = "usb2-phy", "usb3-phy";
751 phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>;
752 status = "okay";
753};
754
755&usb2phy0 {
756 status = "okay";
757};
758
759&usb2phy0_otg {
760 status = "okay";
761};
762
763&usb2phy1 {
764 status = "okay";
765};
766
767&usb2phy1_host {
768 status = "okay";
769};
770
771&vop {
772 assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
773 assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
774 status = "okay";
775};
776
777&vop_mmu {
778 status = "okay";
779};
780
781&vp0 {
782 vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
783 reg = <ROCKCHIP_VOP2_EP_HDMI0>;
784 remote-endpoint = <&hdmi_in_vp0>;
785 };
786};