Tom Rini | 10e4779 | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | /* SPDX-License-Identifier: GPL-2.0+ */ |
wdenk | a6840a6 | 2001-04-09 21:43:07 +0000 | [diff] [blame] | 2 | /* |
| 3 | * (C) Copyright 2001 |
| 4 | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
wdenk | a6840a6 | 2001-04-09 21:43:07 +0000 | [diff] [blame] | 5 | */ |
| 6 | |
| 7 | /* |
| 8 | * Generic RTC interface. |
| 9 | */ |
| 10 | #ifndef _RTC_H_ |
| 11 | #define _RTC_H_ |
| 12 | |
Albin Tonnerre | dfdea73 | 2009-08-13 15:31:12 +0200 | [diff] [blame] | 13 | /* bcd<->bin functions are needed by almost all the RTC drivers, let's include |
| 14 | * it there instead of in evey single driver */ |
| 15 | |
| 16 | #include <bcd.h> |
Simon Glass | 573e3f7 | 2015-04-20 12:37:21 -0600 | [diff] [blame] | 17 | #include <rtc_def.h> |
wdenk | a6840a6 | 2001-04-09 21:43:07 +0000 | [diff] [blame] | 18 | |
Simon Glass | d9050b5 | 2015-04-20 12:37:23 -0600 | [diff] [blame] | 19 | #ifdef CONFIG_DM_RTC |
| 20 | |
| 21 | struct rtc_ops { |
| 22 | /** |
| 23 | * get() - get the current time |
| 24 | * |
| 25 | * Returns the current time read from the RTC device. The driver |
| 26 | * is responsible for setting up every field in the structure. |
| 27 | * |
| 28 | * @dev: Device to read from |
| 29 | * @time: Place to put the time that is read |
| 30 | */ |
| 31 | int (*get)(struct udevice *dev, struct rtc_time *time); |
| 32 | |
| 33 | /** |
| 34 | * set() - set the current time |
| 35 | * |
| 36 | * Sets the time in the RTC device. The driver can expect every |
| 37 | * field to be set correctly. |
| 38 | * |
| 39 | * @dev: Device to read from |
| 40 | * @time: Time to write |
| 41 | */ |
| 42 | int (*set)(struct udevice *dev, const struct rtc_time *time); |
| 43 | |
| 44 | /** |
| 45 | * reset() - reset the RTC to a known-good state |
| 46 | * |
| 47 | * This function resets the RTC to a known-good state. The time may |
| 48 | * be unset by this method, so should be set after this method is |
| 49 | * called. |
| 50 | * |
| 51 | * @dev: Device to read from |
| 52 | * @return 0 if OK, -ve on error |
| 53 | */ |
| 54 | int (*reset)(struct udevice *dev); |
| 55 | |
| 56 | /** |
| 57 | * read8() - Read an 8-bit register |
| 58 | * |
| 59 | * @dev: Device to read from |
| 60 | * @reg: Register to read |
| 61 | * @return value read, or -ve on error |
| 62 | */ |
| 63 | int (*read8)(struct udevice *dev, unsigned int reg); |
| 64 | |
| 65 | /** |
| 66 | * write8() - Write an 8-bit register |
| 67 | * |
| 68 | * @dev: Device to write to |
| 69 | * @reg: Register to write |
| 70 | * @value: Value to write |
| 71 | * @return 0 if OK, -ve on error |
| 72 | */ |
| 73 | int (*write8)(struct udevice *dev, unsigned int reg, int val); |
| 74 | }; |
| 75 | |
| 76 | /* Access the operations for an RTC device */ |
| 77 | #define rtc_get_ops(dev) ((struct rtc_ops *)(dev)->driver->ops) |
| 78 | |
| 79 | /** |
| 80 | * dm_rtc_get() - Read the time from an RTC |
| 81 | * |
| 82 | * @dev: Device to read from |
| 83 | * @time: Place to put the current time |
| 84 | * @return 0 if OK, -ve on error |
| 85 | */ |
| 86 | int dm_rtc_get(struct udevice *dev, struct rtc_time *time); |
| 87 | |
| 88 | /** |
| 89 | * dm_rtc_put() - Write a time to an RTC |
| 90 | * |
| 91 | * @dev: Device to read from |
| 92 | * @time: Time to write into the RTC |
| 93 | * @return 0 if OK, -ve on error |
| 94 | */ |
| 95 | int dm_rtc_set(struct udevice *dev, struct rtc_time *time); |
| 96 | |
| 97 | /** |
| 98 | * dm_rtc_reset() - reset the RTC to a known-good state |
| 99 | * |
| 100 | * If the RTC appears to be broken (e.g. it is not counting up in seconds) |
| 101 | * it may need to be reset to a known good state. This function achieves this. |
| 102 | * After resetting the RTC the time should then be set to a known value by |
| 103 | * the caller. |
| 104 | * |
| 105 | * @dev: Device to read from |
| 106 | * @return 0 if OK, -ve on error |
| 107 | */ |
| 108 | int dm_rtc_reset(struct udevice *dev); |
| 109 | |
| 110 | /** |
| 111 | * rtc_read8() - Read an 8-bit register |
| 112 | * |
| 113 | * @dev: Device to read from |
| 114 | * @reg: Register to read |
| 115 | * @return value read, or -ve on error |
| 116 | */ |
| 117 | int rtc_read8(struct udevice *dev, unsigned int reg); |
| 118 | |
| 119 | /** |
| 120 | * rtc_write8() - Write an 8-bit register |
| 121 | * |
| 122 | * @dev: Device to write to |
| 123 | * @reg: Register to write |
| 124 | * @value: Value to write |
| 125 | * @return 0 if OK, -ve on error |
| 126 | */ |
| 127 | int rtc_write8(struct udevice *dev, unsigned int reg, int val); |
| 128 | |
| 129 | /** |
Bin Meng | fbfe53d | 2017-03-16 07:26:27 -0700 | [diff] [blame] | 130 | * rtc_read16() - Read a 16-bit value from the RTC |
| 131 | * |
| 132 | * @dev: Device to read from |
| 133 | * @reg: Offset to start reading from |
| 134 | * @valuep: Place to put the value that is read |
| 135 | * @return 0 if OK, -ve on error |
| 136 | */ |
| 137 | int rtc_read16(struct udevice *dev, unsigned int reg, u16 *valuep); |
| 138 | |
| 139 | /** |
| 140 | * rtc_write16() - Write a 16-bit value to the RTC |
| 141 | * |
| 142 | * @dev: Device to write to |
| 143 | * @reg: Register to start writing to |
| 144 | * @value: Value to write |
| 145 | * @return 0 if OK, -ve on error |
| 146 | */ |
| 147 | int rtc_write16(struct udevice *dev, unsigned int reg, u16 value); |
| 148 | |
| 149 | /** |
Simon Glass | d9050b5 | 2015-04-20 12:37:23 -0600 | [diff] [blame] | 150 | * rtc_read32() - Read a 32-bit value from the RTC |
| 151 | * |
| 152 | * @dev: Device to read from |
| 153 | * @reg: Offset to start reading from |
| 154 | * @valuep: Place to put the value that is read |
| 155 | * @return 0 if OK, -ve on error |
| 156 | */ |
| 157 | int rtc_read32(struct udevice *dev, unsigned int reg, u32 *valuep); |
| 158 | |
| 159 | /** |
| 160 | * rtc_write32() - Write a 32-bit value to the RTC |
| 161 | * |
| 162 | * @dev: Device to write to |
| 163 | * @reg: Register to start writing to |
| 164 | * @value: Value to write |
| 165 | * @return 0 if OK, -ve on error |
| 166 | */ |
| 167 | int rtc_write32(struct udevice *dev, unsigned int reg, u32 value); |
| 168 | |
| 169 | #else |
Yuri Tikhonov | 9bacd94 | 2008-03-20 17:56:04 +0300 | [diff] [blame] | 170 | int rtc_get (struct rtc_time *); |
Jean-Christophe PLAGNIOL-VILLARD | 97a2e10 | 2008-09-01 23:06:23 +0200 | [diff] [blame] | 171 | int rtc_set (struct rtc_time *); |
wdenk | a6840a6 | 2001-04-09 21:43:07 +0000 | [diff] [blame] | 172 | void rtc_reset (void); |
Priyanka Jain | 28cf0bc | 2015-06-29 15:39:23 +0530 | [diff] [blame] | 173 | void rtc_enable_32khz_output(void); |
wdenk | a6840a6 | 2001-04-09 21:43:07 +0000 | [diff] [blame] | 174 | |
Simon Glass | 538059d | 2014-11-14 18:18:26 -0700 | [diff] [blame] | 175 | /** |
Simon Glass | b4ae600 | 2015-01-19 22:16:10 -0700 | [diff] [blame] | 176 | * rtc_read8() - Read an 8-bit register |
| 177 | * |
| 178 | * @reg: Register to read |
| 179 | * @return value read |
| 180 | */ |
| 181 | int rtc_read8(int reg); |
| 182 | |
| 183 | /** |
| 184 | * rtc_write8() - Write an 8-bit register |
| 185 | * |
| 186 | * @reg: Register to write |
| 187 | * @value: Value to write |
| 188 | */ |
| 189 | void rtc_write8(int reg, uchar val); |
| 190 | |
| 191 | /** |
| 192 | * rtc_read32() - Read a 32-bit value from the RTC |
| 193 | * |
| 194 | * @reg: Offset to start reading from |
| 195 | * @return value read |
| 196 | */ |
| 197 | u32 rtc_read32(int reg); |
| 198 | |
| 199 | /** |
| 200 | * rtc_write32() - Write a 32-bit value to the RTC |
| 201 | * |
| 202 | * @reg: Register to start writing to |
| 203 | * @value: Value to write |
| 204 | */ |
| 205 | void rtc_write32(int reg, u32 value); |
| 206 | |
| 207 | /** |
Simon Glass | 538059d | 2014-11-14 18:18:26 -0700 | [diff] [blame] | 208 | * rtc_init() - Set up the real time clock ready for use |
| 209 | */ |
| 210 | void rtc_init(void); |
Simon Glass | d9050b5 | 2015-04-20 12:37:23 -0600 | [diff] [blame] | 211 | #endif |
Simon Glass | 538059d | 2014-11-14 18:18:26 -0700 | [diff] [blame] | 212 | |
Simon Glass | 2d937bb | 2015-04-20 12:37:17 -0600 | [diff] [blame] | 213 | /** |
| 214 | * rtc_calc_weekday() - Work out the weekday from a time |
| 215 | * |
| 216 | * This only works for the Gregorian calendar - i.e. after 1752 (in the UK). |
| 217 | * It sets time->tm_wdaay to the correct day of the week. |
| 218 | * |
| 219 | * @time: Time to inspect. tm_wday is updated |
| 220 | * @return 0 if OK, -EINVAL if the weekday could not be determined |
| 221 | */ |
| 222 | int rtc_calc_weekday(struct rtc_time *time); |
| 223 | |
Simon Glass | 1299466 | 2015-04-20 12:37:18 -0600 | [diff] [blame] | 224 | /** |
| 225 | * rtc_to_tm() - Convert a time_t value into a broken-out time |
| 226 | * |
| 227 | * The following fields are set up by this function: |
| 228 | * tm_sec, tm_min, tm_hour, tm_mday, tm_mon, tm_year, tm_wday |
| 229 | * |
| 230 | * Note that tm_yday and tm_isdst are set to 0. |
| 231 | * |
| 232 | * @time_t: Number of seconds since 1970-01-01 00:00:00 |
| 233 | * @time: Place to put the broken-out time |
| 234 | * @return 0 if OK, -EINVAL if the weekday could not be determined |
| 235 | */ |
| 236 | int rtc_to_tm(int time_t, struct rtc_time *time); |
| 237 | |
Simon Glass | 4283e84 | 2015-04-20 12:37:19 -0600 | [diff] [blame] | 238 | /** |
| 239 | * rtc_mktime() - Convert a broken-out time into a time_t value |
| 240 | * |
| 241 | * The following fields need to be valid for this function to work: |
| 242 | * tm_sec, tm_min, tm_hour, tm_mday, tm_mon, tm_year |
| 243 | * |
| 244 | * Note that tm_wday and tm_yday are ignored. |
| 245 | * |
| 246 | * @time: Broken-out time to convert |
| 247 | * @return corresponding time_t value, seconds since 1970-01-01 00:00:00 |
| 248 | */ |
| 249 | unsigned long rtc_mktime(const struct rtc_time *time); |
| 250 | |
wdenk | a6840a6 | 2001-04-09 21:43:07 +0000 | [diff] [blame] | 251 | #endif /* _RTC_H_ */ |