blob: 8609f2a0a98663fe91e6d4eeb6993e4294e50e01 [file] [log] [blame]
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +01001/*
2 * (C) Copyright 2015
Kamil Lulko75d48a62015-12-01 09:08:19 +01003 * Kamil Lulko, <kamil.lulko@gmail.com>
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +01004 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8#ifndef __CONFIG_H
9#define __CONFIG_H
10
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010011#define CONFIG_STM32F4DISCOVERY
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010012
Antonio Borneo989e8b22015-07-19 22:19:46 +080013#define CONFIG_MISC_INIT_R
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010014
15#define CONFIG_SYS_FLASH_BASE 0x08000000
16
17#define CONFIG_SYS_INIT_SP_ADDR 0x10010000
18#define CONFIG_SYS_TEXT_BASE 0x08000000
19
20#define CONFIG_SYS_ICACHE_OFF
21#define CONFIG_SYS_DCACHE_OFF
22
23/*
24 * Configuration of the external SDRAM memory
25 */
26#define CONFIG_NR_DRAM_BANKS 1
27#define CONFIG_SYS_RAM_SIZE (8 << 20)
28#define CONFIG_SYS_RAM_CS 1
29#define CONFIG_SYS_RAM_FREQ_DIV 2
30#define CONFIG_SYS_RAM_BASE 0xD0000000
31#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_RAM_BASE
32#define CONFIG_SYS_LOAD_ADDR 0xD0400000
33#define CONFIG_LOADADDR 0xD0400000
34
35#define CONFIG_SYS_MAX_FLASH_SECT 12
36#define CONFIG_SYS_MAX_FLASH_BANKS 2
37
38#define CONFIG_ENV_IS_IN_FLASH
39#define CONFIG_ENV_OFFSET (256 << 10)
40#define CONFIG_ENV_SECT_SIZE (128 << 10)
41#define CONFIG_ENV_SIZE (8 << 10)
42
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010043#define CONFIG_RED_LED 110
44#define CONFIG_GREEN_LED 109
45
46#define CONFIG_STM32_GPIO
Vikas Manochae750d562016-03-09 15:18:13 -080047#define CONFIG_STM32_FLASH
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010048#define CONFIG_STM32_SERIAL
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010049
50#define CONFIG_STM32_HSE_HZ 8000000
51
Antonio Borneof4a1a862015-07-19 22:19:48 +080052#define CONFIG_SYS_CLK_FREQ 180000000 /* 180 MHz */
53
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010054#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */
55
56#define CONFIG_CMDLINE_TAG
57#define CONFIG_SETUP_MEMORY_TAGS
58#define CONFIG_INITRD_TAG
59#define CONFIG_REVISION_TAG
60
61#define CONFIG_SYS_CBSIZE 1024
62#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
63 + sizeof(CONFIG_SYS_PROMPT) + 16)
64
65#define CONFIG_SYS_MAXARGS 16
66
67#define CONFIG_SYS_MALLOC_LEN (2 << 20)
68
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010069#define CONFIG_BOOTARGS \
rev13@wp.pl5837d222015-07-05 12:54:23 +020070 "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010071#define CONFIG_BOOTCOMMAND \
72 "run bootcmd_romfs"
73
74#define CONFIG_EXTRA_ENV_SETTINGS \
75 "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
76 "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
77 "bootm 0x08044000 - 0x08042000\0"
78
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010079/*
80 * Command line configuration.
81 */
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010082#define CONFIG_SYS_LONGHELP
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010083#define CONFIG_AUTO_COMPLETE
84#define CONFIG_CMDLINE_EDITING
85
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010086#define CONFIG_CMD_MEM
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010087
88#endif /* __CONFIG_H */