| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| 2 | %YAML 1.2 |
| 3 | --- |
| 4 | $id: http://devicetree.org/schemas/sound/adi,ssm2518.yaml# |
| 5 | $schema: http://devicetree.org/meta-schemas/core.yaml# |
| 6 | |
| 7 | title: Analog Devices SSM2518 audio amplifier |
| 8 | |
| 9 | maintainers: |
| 10 | - Lars-Peter Clausen <lars@metafoo.de> |
| 11 | |
| 12 | allOf: |
| 13 | - $ref: dai-common.yaml# |
| 14 | |
| 15 | properties: |
| 16 | compatible: |
| 17 | const: adi,ssm2518 |
| 18 | |
| 19 | reg: |
| 20 | maxItems: 1 |
| 21 | description: | |
| 22 | I2C address of the device. This will either be 0x34 (ADDR pin low) |
| 23 | or 0x35 (ADDR pin high) |
| 24 | |
| 25 | gpios: |
| 26 | maxItems: 1 |
| 27 | description: | |
| 28 | GPIO connected to the nSD pin. If the property is not present |
| 29 | it is assumed that the nSD pin is hardwired to always on. |
| 30 | |
| 31 | required: |
| 32 | - compatible |
| 33 | - reg |
| 34 | |
| 35 | unevaluatedProperties: false |
| 36 | |
| 37 | examples: |
| 38 | - | |
| 39 | i2c { |
| 40 | #address-cells = <1>; |
| 41 | #size-cells = <0>; |
| 42 | codec@34 { |
| 43 | compatible = "adi,ssm2518"; |
| 44 | reg = <0x34>; |
| 45 | gpios = <&gpio 5 0>; |
| 46 | }; |
| 47 | }; |