Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 88315f746b4b6c7c7b4403b5e1128dd4f5099304 / . / arch / arm / dts / ste-dbx5x0.dtsi
blob: 6671f74c9f03d939f8d1245a32e3429dc2ab5751 [file] [log] [blame]
Stephan Gerholdd4722582020-01-04 18:45:16 +0100[diff] [blame]1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2012 Linaro Ltd
4 */
5
6#include <dt-bindings/interrupt-controller/irq.h>
7#include <dt-bindings/interrupt-controller/arm-gic.h>
8#include <dt-bindings/mfd/dbx500-prcmu.h>
9#include <dt-bindings/arm/ux500_pm_domains.h>
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/thermal/thermal.h>
12
13/ {
14 #address-cells = <1>;
15 #size-cells = <1>;
16
17 /* This stablilizes the device enumeration */
18 aliases {
19 i2c0 = &i2c0;
20 i2c1 = &i2c1;
21 i2c2 = &i2c2;
22 i2c3 = &i2c3;
23 i2c4 = &i2c4;
24 spi0 = &spi0;
25 spi1 = &spi1;
26 spi2 = &spi2;
27 spi3 = &spi3;
28 serial0 = &serial0;
29 serial1 = &serial1;
30 serial2 = &serial2;
31 };
32
33 chosen {
34 };
35
36 cpus {
37 #address-cells = <1>;
38 #size-cells = <0>;
39 enable-method = "ste,dbx500-smp";
40
41 cpu-map {
42 cluster0 {
43 core0 {
44 cpu = <&CPU0>;
45 };
46 core1 {
47 cpu = <&CPU1>;
48 };
49 };
50 };
51 CPU0: cpu@300 {
52 device_type = "cpu";
53 compatible = "arm,cortex-a9";
54 reg = <0x300>;
55 clocks = <&prcmu_clk PRCMU_ARMSS>;
56 clock-names = "cpu";
57 clock-latency = <20000>;
58 #cooling-cells = <2>;
59 };
60 CPU1: cpu@301 {
61 device_type = "cpu";
62 compatible = "arm,cortex-a9";
63 reg = <0x301>;
64 };
65 };
66
67 thermal-zones {
68 /*
69 * Thermal zone for the SoC, using the thermal sensor in the
70 * PRCMU for temperature and the cpufreq driver for passive
71 * cooling.
72 */
73 cpu_thermal: cpu-thermal {
74 polling-delay-passive = <250>;
75 /*
76 * This sensor fires interrupts to update the thermal
77 * zone, so no polling is needed.
78 */
79 polling-delay = <0>;
80
81 thermal-sensors = <&thermal>;
82
83 trips {
84 cpu_alert: cpu-alert {
85 temperature = <70000>;
86 hysteresis = <2000>;
87 type = "passive";
88 };
89 cpu-crit {
90 temperature = <85000>;
91 hysteresis = <0>;
92 type = "critical";
93 };
94 };
95
96 cooling-maps {
97 trip = <&cpu_alert>;
98 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
99 contribution = <100>;
100 };
101 };
102 };
103
104 soc {
105 #address-cells = <1>;
106 #size-cells = <1>;
107 compatible = "stericsson,db8500", "simple-bus";
108 interrupt-parent = <&intc>;
109 ranges;
110
111 ptm@801ae000 {
112 compatible = "arm,coresight-etm3x", "arm,primecell";
113 reg = <0x801ae000 0x1000>;
114
115 clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
116 clock-names = "apb_pclk", "atclk";
117 cpu = <&CPU0>;
118 out-ports {
119 port {
120 ptm0_out_port: endpoint {
121 remote-endpoint = <&funnel_in_port0>;
122 };
123 };
124 };
125 };
126
127 ptm@801af000 {
128 compatible = "arm,coresight-etm3x", "arm,primecell";
129 reg = <0x801af000 0x1000>;
130
131 clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
132 clock-names = "apb_pclk", "atclk";
133 cpu = <&CPU1>;
134 out-ports {
135 port {
136 ptm1_out_port: endpoint {
137 remote-endpoint = <&funnel_in_port1>;
138 };
139 };
140 };
141 };
142
143 funnel@801a6000 {
144 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
145 reg = <0x801a6000 0x1000>;
146
147 clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
148 clock-names = "apb_pclk", "atclk";
149 out-ports {
150 port {
151 funnel_out_port: endpoint {
152 remote-endpoint =
153 <&replicator_in_port0>;
154 };
155 };
156 };
157
158 in-ports {
159 #address-cells = <1>;
160 #size-cells = <0>;
161
162 port@0 {
163 reg = <0>;
164 funnel_in_port0: endpoint {
165 remote-endpoint = <&ptm0_out_port>;
166 };
167 };
168
169 port@1 {
170 reg = <1>;
171 funnel_in_port1: endpoint {
172 remote-endpoint = <&ptm1_out_port>;
173 };
174 };
175 };
176 };
177
178 replicator {
179 compatible = "arm,coresight-static-replicator";
180 clocks = <&prcmu_clk PRCMU_APEATCLK>;
181 clock-names = "atclk";
182
183 out-ports {
184 #address-cells = <1>;
185 #size-cells = <0>;
186
187 port@0 {
188 reg = <0>;
189 replicator_out_port0: endpoint {
190 remote-endpoint = <&tpiu_in_port>;
191 };
192 };
193 port@1 {
194 reg = <1>;
195 replicator_out_port1: endpoint {
196 remote-endpoint = <&etb_in_port>;
197 };
198 };
199 };
200
201 in-ports {
202 port {
203 replicator_in_port0: endpoint {
204 remote-endpoint = <&funnel_out_port>;
205 };
206 };
207 };
208 };
209
210 tpiu@80190000 {
211 compatible = "arm,coresight-tpiu", "arm,primecell";
212 reg = <0x80190000 0x1000>;
213
214 clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
215 clock-names = "apb_pclk", "atclk";
216 in-ports {
217 port {
218 tpiu_in_port: endpoint {
219 remote-endpoint = <&replicator_out_port0>;
220 };
221 };
222 };
223 };
224
225 etb@801a4000 {
226 compatible = "arm,coresight-etb10", "arm,primecell";
227 reg = <0x801a4000 0x1000>;
228
229 clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
230 clock-names = "apb_pclk", "atclk";
231 in-ports {
232 port {
233 etb_in_port: endpoint {
234 remote-endpoint = <&replicator_out_port1>;
235 };
236 };
237 };
238 };
239
240 intc: interrupt-controller@a0411000 {
241 compatible = "arm,cortex-a9-gic";
242 #interrupt-cells = <3>;
243 #address-cells = <1>;
244 interrupt-controller;
245 reg = <0xa0411000 0x1000>,
246 <0xa0410100 0x100>;
247 };
248
249 scu@a0410000 {
250 compatible = "arm,cortex-a9-scu";
251 reg = <0xa0410000 0x100>;
252 };
253
254 /*
255 * The backup RAM is used for retention during sleep
256 * and various things like spin tables
257 */
258 backupram@80150000 {
259 compatible = "ste,dbx500-backupram";
260 reg = <0x80150000 0x2000>;
261 };
262
263 L2: l2-cache {
264 compatible = "arm,pl310-cache";
265 reg = <0xa0412000 0x1000>;
266 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
267 cache-unified;
268 cache-level = <2>;
269 };
270
271 pmu {
272 compatible = "arm,cortex-a9-pmu";
273 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
274 };
275
276 pm_domains: pm_domains0 {
277 compatible = "stericsson,ux500-pm-domains";
278 #power-domain-cells = <1>;
279 };
280
281 clocks {
282 compatible = "stericsson,u8500-clks";
283 /*
284 * Registers for the CLKRST block on peripheral
285 * groups 1, 2, 3, 5, 6,
286 */
287 reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
288 <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
289 <0xa03cf000 0x1000>;
290
291 prcmu_clk: prcmu-clock {
292 #clock-cells = <1>;
293 };
294
295 prcc_pclk: prcc-periph-clock {
296 #clock-cells = <2>;
297 };
298
299 prcc_kclk: prcc-kernel-clock {
300 #clock-cells = <2>;
301 };
302
303 rtc_clk: rtc32k-clock {
304 #clock-cells = <0>;
305 };
306
307 smp_twd_clk: smp-twd-clock {
308 #clock-cells = <0>;
309 };
310 };
311
312 mtu@a03c6000 {
313 /* Nomadik System Timer */
314 compatible = "st,nomadik-mtu";
315 reg = <0xa03c6000 0x1000>;
316 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
317
318 clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
319 clock-names = "timclk", "apb_pclk";
320 };
321
322 timer@a0410600 {
323 compatible = "arm,cortex-a9-twd-timer";
324 reg = <0xa0410600 0x20>;
325 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
326
327 clocks = <&smp_twd_clk>;
328 };
329
330 watchdog@a0410620 {
331 compatible = "arm,cortex-a9-twd-wdt";
332 reg = <0xa0410620 0x20>;
333 interrupts = <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
334 clocks = <&smp_twd_clk>;
335 };
336
337 rtc@80154000 {
338 compatible = "arm,pl031", "arm,primecell";
339 reg = <0x80154000 0x1000>;
340 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
341
342 clocks = <&rtc_clk>;
343 clock-names = "apb_pclk";
344 };
345
346 gpio0: gpio@8012e000 {
347 compatible = "stericsson,db8500-gpio",
348 "st,nomadik-gpio";
349 reg = <0x8012e000 0x80>;
350 interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
351 interrupt-controller;
352 #interrupt-cells = <2>;
353 st,supports-sleepmode;
354 gpio-controller;
355 #gpio-cells = <2>;
356 gpio-bank = <0>;
357 gpio-ranges = <&pinctrl 0 0 32>;
358 clocks = <&prcc_pclk 1 9>;
359 };
360
361 gpio1: gpio@8012e080 {
362 compatible = "stericsson,db8500-gpio",
363 "st,nomadik-gpio";
364 reg = <0x8012e080 0x80>;
365 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
366 interrupt-controller;
367 #interrupt-cells = <2>;
368 st,supports-sleepmode;
369 gpio-controller;
370 #gpio-cells = <2>;
371 gpio-bank = <1>;
372 gpio-ranges = <&pinctrl 0 32 5>;
373 clocks = <&prcc_pclk 1 9>;
374 };
375
376 gpio2: gpio@8000e000 {
377 compatible = "stericsson,db8500-gpio",
378 "st,nomadik-gpio";
379 reg = <0x8000e000 0x80>;
380 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
381 interrupt-controller;
382 #interrupt-cells = <2>;
383 st,supports-sleepmode;
384 gpio-controller;
385 #gpio-cells = <2>;
386 gpio-bank = <2>;
387 gpio-ranges = <&pinctrl 0 64 32>;
388 clocks = <&prcc_pclk 3 8>;
389 };
390
391 gpio3: gpio@8000e080 {
392 compatible = "stericsson,db8500-gpio",
393 "st,nomadik-gpio";
394 reg = <0x8000e080 0x80>;
395 interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
396 interrupt-controller;
397 #interrupt-cells = <2>;
398 st,supports-sleepmode;
399 gpio-controller;
400 #gpio-cells = <2>;
401 gpio-bank = <3>;
402 gpio-ranges = <&pinctrl 0 96 2>;
403 clocks = <&prcc_pclk 3 8>;
404 };
405
406 gpio4: gpio@8000e100 {
407 compatible = "stericsson,db8500-gpio",
408 "st,nomadik-gpio";
409 reg = <0x8000e100 0x80>;
410 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
411 interrupt-controller;
412 #interrupt-cells = <2>;
413 st,supports-sleepmode;
414 gpio-controller;
415 #gpio-cells = <2>;
416 gpio-bank = <4>;
417 gpio-ranges = <&pinctrl 0 128 32>;
418 clocks = <&prcc_pclk 3 8>;
419 };
420
421 gpio5: gpio@8000e180 {
422 compatible = "stericsson,db8500-gpio",
423 "st,nomadik-gpio";
424 reg = <0x8000e180 0x80>;
425 interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
426 interrupt-controller;
427 #interrupt-cells = <2>;
428 st,supports-sleepmode;
429 gpio-controller;
430 #gpio-cells = <2>;
431 gpio-bank = <5>;
432 gpio-ranges = <&pinctrl 0 160 12>;
433 clocks = <&prcc_pclk 3 8>;
434 };
435
436 gpio6: gpio@8011e000 {
437 compatible = "stericsson,db8500-gpio",
438 "st,nomadik-gpio";
439 reg = <0x8011e000 0x80>;
440 interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
441 interrupt-controller;
442 #interrupt-cells = <2>;
443 st,supports-sleepmode;
444 gpio-controller;
445 #gpio-cells = <2>;
446 gpio-bank = <6>;
447 gpio-ranges = <&pinctrl 0 192 32>;
448 clocks = <&prcc_pclk 2 11>;
449 };
450
451 gpio7: gpio@8011e080 {
452 compatible = "stericsson,db8500-gpio",
453 "st,nomadik-gpio";
454 reg = <0x8011e080 0x80>;
455 interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
456 interrupt-controller;
457 #interrupt-cells = <2>;
458 st,supports-sleepmode;
459 gpio-controller;
460 #gpio-cells = <2>;
461 gpio-bank = <7>;
462 gpio-ranges = <&pinctrl 0 224 7>;
463 clocks = <&prcc_pclk 2 11>;
464 };
465
466 gpio8: gpio@a03fe000 {
467 compatible = "stericsson,db8500-gpio",
468 "st,nomadik-gpio";
469 reg = <0xa03fe000 0x80>;
470 interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
471 interrupt-controller;
472 #interrupt-cells = <2>;
473 st,supports-sleepmode;
474 gpio-controller;
475 #gpio-cells = <2>;
476 gpio-bank = <8>;
477 gpio-ranges = <&pinctrl 0 256 12>;
478 clocks = <&prcc_pclk 5 1>;
479 };
480
481 pinctrl: pinctrl {
482 compatible = "stericsson,db8500-pinctrl";
483 nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>,
484 <&gpio4>, <&gpio5>, <&gpio6>, <&gpio7>,
485 <&gpio8>;
486 prcm = <&prcmu>;
487 };
488
489 usb_per5@a03e0000 {
490 compatible = "stericsson,db8500-musb";
491 reg = <0xa03e0000 0x10000>;
492 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
493 interrupt-names = "mc";
494
495 dr_mode = "otg";
496
497 dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
498 <&dma 38 0 0x0>, /* Logical - MemToDev */
499 <&dma 37 0 0x2>, /* Logical - DevToMem */
500 <&dma 37 0 0x0>, /* Logical - MemToDev */
501 <&dma 36 0 0x2>, /* Logical - DevToMem */
502 <&dma 36 0 0x0>, /* Logical - MemToDev */
503 <&dma 19 0 0x2>, /* Logical - DevToMem */
504 <&dma 19 0 0x0>, /* Logical - MemToDev */
505 <&dma 18 0 0x2>, /* Logical - DevToMem */
506 <&dma 18 0 0x0>, /* Logical - MemToDev */
507 <&dma 17 0 0x2>, /* Logical - DevToMem */
508 <&dma 17 0 0x0>, /* Logical - MemToDev */
509 <&dma 16 0 0x2>, /* Logical - DevToMem */
510 <&dma 16 0 0x0>, /* Logical - MemToDev */
511 <&dma 39 0 0x2>, /* Logical - DevToMem */
512 <&dma 39 0 0x0>; /* Logical - MemToDev */
513
514 dma-names = "iep_1_9", "oep_1_9",
515 "iep_2_10", "oep_2_10",
516 "iep_3_11", "oep_3_11",
517 "iep_4_12", "oep_4_12",
518 "iep_5_13", "oep_5_13",
519 "iep_6_14", "oep_6_14",
520 "iep_7_15", "oep_7_15",
521 "iep_8", "oep_8";
522
523 clocks = <&prcc_pclk 5 0>;
524 };
525
526 dma: dma-controller@801C0000 {
527 compatible = "stericsson,db8500-dma40", "stericsson,dma40";
528 reg = <0x801C0000 0x1000 0x40010000 0x800>;
529 reg-names = "base", "lcpa";
530 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
531
532 #dma-cells = <3>;
533 memcpy-channels = <56 57 58 59 60>;
534
535 clocks = <&prcmu_clk PRCMU_DMACLK>;
536 };
537
538 prcmu: prcmu@80157000 {
539 compatible = "stericsson,db8500-prcmu", "syscon";
540 reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
541 reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
542 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
543 #address-cells = <1>;
544 #size-cells = <1>;
545 interrupt-controller;
546 #interrupt-cells = <2>;
547 ranges;
548
549 prcmu-timer-4@80157450 {
550 compatible = "stericsson,db8500-prcmu-timer-4";
551 reg = <0x80157450 0xC>;
552 };
553
554 thermal: thermal@801573c0 {
555 compatible = "stericsson,db8500-thermal";
556 reg = <0x801573c0 0x40>;
557 interrupt-parent = <&prcmu>;
558 interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
559 <22 IRQ_TYPE_LEVEL_HIGH>;
560 interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
561 #thermal-sensor-cells = <0>;
562 };
563
564 db8500-prcmu-regulators {
565 compatible = "stericsson,db8500-prcmu-regulator";
566
567 // DB8500_REGULATOR_VAPE
568 db8500_vape_reg: db8500_vape {
569 regulator-always-on;
570 };
571
572 // DB8500_REGULATOR_VARM
573 db8500_varm_reg: db8500_varm {
574 };
575
576 // DB8500_REGULATOR_VMODEM
577 db8500_vmodem_reg: db8500_vmodem {
578 };
579
580 // DB8500_REGULATOR_VPLL
581 db8500_vpll_reg: db8500_vpll {
582 };
583
584 // DB8500_REGULATOR_VSMPS1
585 db8500_vsmps1_reg: db8500_vsmps1 {
586 };
587
588 // DB8500_REGULATOR_VSMPS2
589 db8500_vsmps2_reg: db8500_vsmps2 {
590 };
591
592 // DB8500_REGULATOR_VSMPS3
593 db8500_vsmps3_reg: db8500_vsmps3 {
594 };
595
596 // DB8500_REGULATOR_VRF1
597 db8500_vrf1_reg: db8500_vrf1 {
598 };
599
600 // DB8500_REGULATOR_SWITCH_SVAMMDSP
601 db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
602 };
603
604 // DB8500_REGULATOR_SWITCH_SVAMMDSPRET
605 db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
606 };
607
608 // DB8500_REGULATOR_SWITCH_SVAPIPE
609 db8500_sva_pipe_reg: db8500_sva_pipe {
610 };
611
612 // DB8500_REGULATOR_SWITCH_SIAMMDSP
613 db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
614 };
615
616 // DB8500_REGULATOR_SWITCH_SIAMMDSPRET
617 db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
618 };
619
620 // DB8500_REGULATOR_SWITCH_SIAPIPE
621 db8500_sia_pipe_reg: db8500_sia_pipe {
622 };
623
624 // DB8500_REGULATOR_SWITCH_SGA
625 db8500_sga_reg: db8500_sga {
626 vin-supply = <&db8500_vape_reg>;
627 };
628
629 // DB8500_REGULATOR_SWITCH_B2R2_MCDE
630 db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
631 vin-supply = <&db8500_vape_reg>;
632 };
633
634 // DB8500_REGULATOR_SWITCH_ESRAM12
635 db8500_esram12_reg: db8500_esram12 {
636 };
637
638 // DB8500_REGULATOR_SWITCH_ESRAM12RET
639 db8500_esram12_ret_reg: db8500_esram12_ret {
640 };
641
642 // DB8500_REGULATOR_SWITCH_ESRAM34
643 db8500_esram34_reg: db8500_esram34 {
644 };
645
646 // DB8500_REGULATOR_SWITCH_ESRAM34RET
647 db8500_esram34_ret_reg: db8500_esram34_ret {
648 };
649 };
650 };
651
652 i2c0: i2c@80004000 {
653 compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
654 reg = <0x80004000 0x1000>;
655 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
656
657 #address-cells = <1>;
658 #size-cells = <0>;
659 v-i2c-supply = <&db8500_vape_reg>;
660
661 clock-frequency = <400000>;
662 clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
663 clock-names = "i2cclk", "apb_pclk";
664 power-domains = <&pm_domains DOMAIN_VAPE>;
665
666 status = "disabled";
667 };
668
669 i2c1: i2c@80122000 {
670 compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
671 reg = <0x80122000 0x1000>;
672 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
673
674 #address-cells = <1>;
675 #size-cells = <0>;
676 v-i2c-supply = <&db8500_vape_reg>;
677
678 clock-frequency = <400000>;
679
680 clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
681 clock-names = "i2cclk", "apb_pclk";
682 power-domains = <&pm_domains DOMAIN_VAPE>;
683
684 status = "disabled";
685 };
686
687 i2c2: i2c@80128000 {
688 compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
689 reg = <0x80128000 0x1000>;
690 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
691
692 #address-cells = <1>;
693 #size-cells = <0>;
694 v-i2c-supply = <&db8500_vape_reg>;
695
696 clock-frequency = <400000>;
697
698 clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
699 clock-names = "i2cclk", "apb_pclk";
700 power-domains = <&pm_domains DOMAIN_VAPE>;
701
702 status = "disabled";
703 };
704
705 i2c3: i2c@80110000 {
706 compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
707 reg = <0x80110000 0x1000>;
708 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
709
710 #address-cells = <1>;
711 #size-cells = <0>;
712 v-i2c-supply = <&db8500_vape_reg>;
713
714 clock-frequency = <400000>;
715
716 clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
717 clock-names = "i2cclk", "apb_pclk";
718 power-domains = <&pm_domains DOMAIN_VAPE>;
719
720 status = "disabled";
721 };
722
723 i2c4: i2c@8012a000 {
724 compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
725 reg = <0x8012a000 0x1000>;
726 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
727
728 #address-cells = <1>;
729 #size-cells = <0>;
730 v-i2c-supply = <&db8500_vape_reg>;
731
732 clock-frequency = <400000>;
733
734 clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
735 clock-names = "i2cclk", "apb_pclk";
736 power-domains = <&pm_domains DOMAIN_VAPE>;
737
738 status = "disabled";
739 };
740
741 ssp0: spi@80002000 {
742 compatible = "arm,pl022", "arm,primecell";
743 reg = <0x80002000 0x1000>;
744 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
745 #address-cells = <1>;
746 #size-cells = <0>;
747 clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
748 clock-names = "SSPCLK", "apb_pclk";
749 dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
750 <&dma 8 0 0x0>; /* Logical - MemToDev */
751 dma-names = "rx", "tx";
752 power-domains = <&pm_domains DOMAIN_VAPE>;
753
754 status = "disabled";
755 };
756
757 ssp1: spi@80003000 {
758 compatible = "arm,pl022", "arm,primecell";
759 reg = <0x80003000 0x1000>;
760 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
761 #address-cells = <1>;
762 #size-cells = <0>;
763 clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
764 clock-names = "SSPCLK", "apb_pclk";
765 dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
766 <&dma 9 0 0x0>; /* Logical - MemToDev */
767 dma-names = "rx", "tx";
768 power-domains = <&pm_domains DOMAIN_VAPE>;
769
770 status = "disabled";
771 };
772
773 spi0: spi@8011a000 {
774 compatible = "arm,pl022", "arm,primecell";
775 reg = <0x8011a000 0x1000>;
776 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
777 #address-cells = <1>;
778 #size-cells = <0>;
779 /* Same clock wired to kernel and pclk */
780 clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
781 clock-names = "SSPCLK", "apb_pclk";
782 dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
783 <&dma 0 0 0x0>; /* Logical - MemToDev */
784 dma-names = "rx", "tx";
785 power-domains = <&pm_domains DOMAIN_VAPE>;
786
787 status = "disabled";
788 };
789
790 spi1: spi@80112000 {
791 compatible = "arm,pl022", "arm,primecell";
792 reg = <0x80112000 0x1000>;
793 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
794 #address-cells = <1>;
795 #size-cells = <0>;
796 /* Same clock wired to kernel and pclk */
797 clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
798 clock-names = "SSPCLK", "apb_pclk";
799 dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
800 <&dma 35 0 0x0>; /* Logical - MemToDev */
801 dma-names = "rx", "tx";
802 power-domains = <&pm_domains DOMAIN_VAPE>;
803
804 status = "disabled";
805 };
806
807 spi2: spi@80111000 {
808 compatible = "arm,pl022", "arm,primecell";
809 reg = <0x80111000 0x1000>;
810 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
811 #address-cells = <1>;
812 #size-cells = <0>;
813 /* Same clock wired to kernel and pclk */
814 clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
815 clock-names = "SSPCLK", "apb_pclk";
816 dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
817 <&dma 33 0 0x0>; /* Logical - MemToDev */
818 dma-names = "rx", "tx";
819 power-domains = <&pm_domains DOMAIN_VAPE>;
820
821 status = "disabled";
822 };
823
824 spi3: spi@80129000 {
825 compatible = "arm,pl022", "arm,primecell";
826 reg = <0x80129000 0x1000>;
827 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
828 #address-cells = <1>;
829 #size-cells = <0>;
830 /* Same clock wired to kernel and pclk */
831 clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
832 clock-names = "SSPCLK", "apb_pclk";
833 dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
834 <&dma 40 0 0x0>; /* Logical - MemToDev */
835 dma-names = "rx", "tx";
836 power-domains = <&pm_domains DOMAIN_VAPE>;
837
838 status = "disabled";
839 };
840
841 serial0: uart@80120000 {
842 compatible = "arm,pl011", "arm,primecell";
843 reg = <0x80120000 0x1000>;
844 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
845
846 dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
847 <&dma 13 0 0x0>; /* Logical - MemToDev */
848 dma-names = "rx", "tx";
849
850 clocks = <&prcc_kclk 1 0>, <&prcc_pclk 1 0>;
851 clock-names = "uart", "apb_pclk";
852
853 status = "disabled";
854 };
855
856 serial1: uart@80121000 {
857 compatible = "arm,pl011", "arm,primecell";
858 reg = <0x80121000 0x1000>;
859 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
860
861 dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */
862 <&dma 12 0 0x0>; /* Logical - MemToDev */
863 dma-names = "rx", "tx";
864
865 clocks = <&prcc_kclk 1 1>, <&prcc_pclk 1 1>;
866 clock-names = "uart", "apb_pclk";
867
868 status = "disabled";
869 };
870
871 serial2: uart@80007000 {
872 compatible = "arm,pl011", "arm,primecell";
873 reg = <0x80007000 0x1000>;
874 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
875
876 dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */
877 <&dma 11 0 0x0>; /* Logical - MemToDev */
878 dma-names = "rx", "tx";
879
880 clocks = <&prcc_kclk 3 6>, <&prcc_pclk 3 6>;
881 clock-names = "uart", "apb_pclk";
882
883 status = "disabled";
884 };
885
886 sdi0_per1@80126000 {
887 compatible = "arm,pl18x", "arm,primecell";
888 reg = <0x80126000 0x1000>;
889 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
890
891 dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
892 <&dma 29 0 0x0>; /* Logical - MemToDev */
893 dma-names = "rx", "tx";
894
895 clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
896 clock-names = "sdi", "apb_pclk";
897 power-domains = <&pm_domains DOMAIN_VAPE>;
898
899 status = "disabled";
900 };
901
902 sdi1_per2@80118000 {
903 compatible = "arm,pl18x", "arm,primecell";
904 reg = <0x80118000 0x1000>;
905 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
906
907 dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */
908 <&dma 32 0 0x0>; /* Logical - MemToDev */
909 dma-names = "rx", "tx";
910
911 clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>;
912 clock-names = "sdi", "apb_pclk";
913 power-domains = <&pm_domains DOMAIN_VAPE>;
914
915 status = "disabled";
916 };
917
918 sdi2_per3@80005000 {
919 compatible = "arm,pl18x", "arm,primecell";
920 reg = <0x80005000 0x1000>;
921 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
922
923 dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */
924 <&dma 28 0 0x0>; /* Logical - MemToDev */
925 dma-names = "rx", "tx";
926
927 clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>;
928 clock-names = "sdi", "apb_pclk";
929 power-domains = <&pm_domains DOMAIN_VAPE>;
930
931 status = "disabled";
932 };
933
934 sdi3_per2@80119000 {
935 compatible = "arm,pl18x", "arm,primecell";
936 reg = <0x80119000 0x1000>;
937 interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
938
939 dmas = <&dma 41 0 0x2>, /* Logical - DevToMem */
940 <&dma 41 0 0x0>; /* Logical - MemToDev */
941 dma-names = "rx", "tx";
942
943 clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>;
944 clock-names = "sdi", "apb_pclk";
945 power-domains = <&pm_domains DOMAIN_VAPE>;
946
947 status = "disabled";
948 };
949
950 sdi4_per2@80114000 {
951 compatible = "arm,pl18x", "arm,primecell";
952 reg = <0x80114000 0x1000>;
953 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
954
955 dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */
956 <&dma 42 0 0x0>; /* Logical - MemToDev */
957 dma-names = "rx", "tx";
958
959 clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>;
960 clock-names = "sdi", "apb_pclk";
961 power-domains = <&pm_domains DOMAIN_VAPE>;
962
963 status = "disabled";
964 };
965
966 sdi5_per3@80008000 {
967 compatible = "arm,pl18x", "arm,primecell";
968 reg = <0x80008000 0x1000>;
969 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
970
971 dmas = <&dma 43 0 0x2>, /* Logical - DevToMem */
972 <&dma 43 0 0x0>; /* Logical - MemToDev */
973 dma-names = "rx", "tx";
974
975 clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>;
976 clock-names = "sdi", "apb_pclk";
977 power-domains = <&pm_domains DOMAIN_VAPE>;
978
979 status = "disabled";
980 };
981
982 sound {
983 compatible = "stericsson,snd-soc-mop500";
984 stericsson,cpu-dai = <&msp1 &msp3>;
985 };
986
987 msp0: msp@80123000 {
988 compatible = "stericsson,ux500-msp-i2s";
989 reg = <0x80123000 0x1000>;
990 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
991 v-ape-supply = <&db8500_vape_reg>;
992
993 dmas = <&dma 31 0 0x12>, /* Logical - DevToMem - HighPrio */
994 <&dma 31 0 0x10>; /* Logical - MemToDev - HighPrio */
995 dma-names = "rx", "tx";
996
997 clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>;
998 clock-names = "msp", "apb_pclk";
999
1000 status = "disabled";
1001 };
1002
1003 msp1: msp@80124000 {
1004 compatible = "stericsson,ux500-msp-i2s";
1005 reg = <0x80124000 0x1000>;
1006 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
1007 v-ape-supply = <&db8500_vape_reg>;
1008
1009 /* This DMA channel only exist on DB8500 v1 */
1010 dmas = <&dma 30 0 0x10>; /* Logical - MemToDev - HighPrio */
1011 dma-names = "tx";
1012
1013 clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>;
1014 clock-names = "msp", "apb_pclk";
1015
1016 status = "disabled";
1017 };
1018
1019 // HDMI sound
1020 msp2: msp@80117000 {
1021 compatible = "stericsson,ux500-msp-i2s";
1022 reg = <0x80117000 0x1000>;
1023 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1024 v-ape-supply = <&db8500_vape_reg>;
1025
1026 dmas = <&dma 14 0 0x12>, /* Logical - DevToMem - HighPrio */
1027 <&dma 14 1 0x19>; /* Physical Chan 1 - MemToDev
1028 HighPrio - Fixed */
1029 dma-names = "rx", "tx";
1030
1031 clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>;
1032 clock-names = "msp", "apb_pclk";
1033
1034 status = "disabled";
1035 };
1036
1037 msp3: msp@80125000 {
1038 compatible = "stericsson,ux500-msp-i2s";
1039 reg = <0x80125000 0x1000>;
1040 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
1041 v-ape-supply = <&db8500_vape_reg>;
1042
1043 /* This DMA channel only exist on DB8500 v2 */
1044 dmas = <&dma 30 0 0x12>; /* Logical - DevToMem - HighPrio */
1045 dma-names = "rx";
1046
1047 clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>;
1048 clock-names = "msp", "apb_pclk";
1049
1050 status = "disabled";
1051 };
1052
1053 external-bus@50000000 {
1054 compatible = "simple-bus";
1055 reg = <0x50000000 0x4000000>;
1056 #address-cells = <1>;
1057 #size-cells = <1>;
1058 ranges = <0 0x50000000 0x4000000>;
1059 status = "disabled";
1060 };
1061
1062 gpu@a0300000 {
1063 /*
1064 * This block is referred to as "Smart Graphics Adapter SGA500"
1065 * in documentation but is in practice a pretty straight-forward
1066 * MALI-400 GPU block.
1067 */
1068 compatible = "stericsson,db8500-mali", "arm,mali-400";
1069 reg = <0xa0300000 0x10000>;
1070 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
1071 <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
1072 <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
1073 <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
1074 <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
1075 interrupt-names = "gp",
1076 "gpmmu",
1077 "pp0",
1078 "ppmmu0",
1079 "combined";
1080 clocks = <&prcmu_clk PRCMU_ACLK>, <&prcmu_clk PRCMU_SGACLK>;
1081 clock-names = "bus", "core";
1082 mali-supply = <&db8500_sga_reg>;
1083 power-domains = <&pm_domains DOMAIN_VAPE>;
1084 };
1085
1086 mcde@a0350000 {
1087 compatible = "ste,mcde";
1088 reg = <0xa0350000 0x1000>;
1089 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
1090 epod-supply = <&db8500_b2r2_mcde_reg>;
1091 clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */
1092 <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */
1093 <&prcmu_clk PRCMU_PLLDSI>; /* HDMI clock */
1094 clock-names = "mcde", "lcd", "hdmi";
1095 #address-cells = <1>;
1096 #size-cells = <1>;
1097 ranges;
1098 status = "disabled";
1099
1100 dsi0: dsi@a0351000 {
1101 compatible = "ste,mcde-dsi";
1102 reg = <0xa0351000 0x1000>;
1103 clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
1104 clock-names = "hs", "lp";
1105 #address-cells = <1>;
1106 #size-cells = <0>;
1107 };
1108 dsi1: dsi@a0352000 {
1109 compatible = "ste,mcde-dsi";
1110 reg = <0xa0352000 0x1000>;
1111 clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
1112 clock-names = "hs", "lp";
1113 #address-cells = <1>;
1114 #size-cells = <0>;
1115 };
1116 dsi2: dsi@a0353000 {
1117 compatible = "ste,mcde-dsi";
1118 reg = <0xa0353000 0x1000>;
1119 /* This DSI port only has the Low Power / Energy Save clock */
1120 clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>;
1121 clock-names = "lp";
1122 #address-cells = <1>;
1123 #size-cells = <0>;
1124 };
1125 };
1126
1127 cryp@a03cb000 {
1128 compatible = "stericsson,ux500-cryp";
1129 reg = <0xa03cb000 0x1000>;
1130 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
1131
1132 v-ape-supply = <&db8500_vape_reg>;
1133 clocks = <&prcc_pclk 6 1>;
1134 };
1135
1136 hash@a03c2000 {
1137 compatible = "stericsson,ux500-hash";
1138 reg = <0xa03c2000 0x1000>;
1139
1140 v-ape-supply = <&db8500_vape_reg>;
1141 clocks = <&prcc_pclk 6 2>;
1142 };
1143 };
1144};