Tom Rini | 8b0c8a1 | 2018-05-06 18:27:01 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ OR X11 |
Ashish Kumar | b25faa2 | 2017-08-31 16:12:53 +0530 | [diff] [blame] | 2 | /* |
| 3 | * NXP ls1088a SOC common device tree source |
| 4 | * |
| 5 | * Copyright 2017 NXP |
Ashish Kumar | b25faa2 | 2017-08-31 16:12:53 +0530 | [diff] [blame] | 6 | */ |
| 7 | |
| 8 | / { |
| 9 | compatible = "fsl,ls1088a"; |
| 10 | interrupt-parent = <&gic>; |
| 11 | #address-cells = <2>; |
| 12 | #size-cells = <2>; |
| 13 | |
| 14 | memory@80000000 { |
| 15 | device_type = "memory"; |
| 16 | reg = <0x00000000 0x80000000 0 0x80000000>; |
| 17 | /* DRAM space - 1, size : 2 GB DRAM */ |
| 18 | }; |
| 19 | |
| 20 | gic: interrupt-controller@6000000 { |
| 21 | compatible = "arm,gic-v3"; |
| 22 | reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ |
| 23 | <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */ |
| 24 | #interrupt-cells = <3>; |
| 25 | interrupt-controller; |
| 26 | interrupts = <1 9 0x4>; |
| 27 | }; |
| 28 | |
| 29 | timer { |
| 30 | compatible = "arm,armv8-timer"; |
| 31 | interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ |
| 32 | <1 14 0x8>, /* Physical Non-Secure PPI, active-low */ |
| 33 | <1 11 0x8>, /* Virtual PPI, active-low */ |
| 34 | <1 10 0x8>; /* Hypervisor PPI, active-low */ |
| 35 | }; |
| 36 | |
Chuanhua Han | 2f2767b | 2019-07-23 18:43:14 +0800 | [diff] [blame] | 37 | i2c0: i2c@2000000 { |
| 38 | compatible = "fsl,vf610-i2c"; |
| 39 | #address-cells = <1>; |
| 40 | #size-cells = <0>; |
| 41 | reg = <0x0 0x2000000 0x0 0x10000>; |
| 42 | interrupts = <0 34 4>; |
| 43 | }; |
| 44 | |
| 45 | i2c1: i2c@2010000 { |
| 46 | compatible = "fsl,vf610-i2c"; |
| 47 | #address-cells = <1>; |
| 48 | #size-cells = <0>; |
| 49 | reg = <0x0 0x2010000 0x0 0x10000>; |
| 50 | interrupts = <0 34 4>; |
| 51 | }; |
| 52 | |
| 53 | i2c2: i2c@2020000 { |
| 54 | compatible = "fsl,vf610-i2c"; |
| 55 | #address-cells = <1>; |
| 56 | #size-cells = <0>; |
| 57 | reg = <0x0 0x2020000 0x0 0x10000>; |
| 58 | interrupts = <0 35 4>; |
| 59 | }; |
| 60 | |
| 61 | i2c3: i2c@2030000 { |
| 62 | compatible = "fsl,vf610-i2c"; |
| 63 | #address-cells = <1>; |
| 64 | #size-cells = <0>; |
| 65 | reg = <0x0 0x2030000 0x0 0x10000>; |
| 66 | interrupts = <0 35 4>; |
| 67 | }; |
| 68 | |
Ashish Kumar | b25faa2 | 2017-08-31 16:12:53 +0530 | [diff] [blame] | 69 | serial0: serial@21c0500 { |
| 70 | device_type = "serial"; |
| 71 | compatible = "fsl,ns16550", "ns16550a"; |
| 72 | reg = <0x0 0x21c0500 0x0 0x100>; |
| 73 | clock-frequency = <0>; /* Updated by bootloader */ |
| 74 | interrupts = <0 32 0x1>; /* edge triggered */ |
| 75 | }; |
| 76 | |
| 77 | serial1: serial@21c0600 { |
| 78 | device_type = "serial"; |
| 79 | compatible = "fsl,ns16550", "ns16550a"; |
| 80 | reg = <0x0 0x21c0600 0x0 0x100>; |
| 81 | clock-frequency = <0>; /* Updated by bootloader */ |
| 82 | interrupts = <0 32 0x1>; /* edge triggered */ |
| 83 | }; |
| 84 | |
| 85 | fsl_mc: fsl-mc@80c000000 { |
| 86 | compatible = "fsl,qoriq-mc"; |
| 87 | reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ |
| 88 | <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ |
| 89 | }; |
| 90 | |
| 91 | dspi: dspi@2100000 { |
| 92 | compatible = "fsl,vf610-dspi"; |
| 93 | #address-cells = <1>; |
| 94 | #size-cells = <0>; |
| 95 | reg = <0x0 0x2100000 0x0 0x10000>; |
| 96 | interrupts = <0 26 0x4>; /* Level high type */ |
| 97 | num-cs = <6>; |
| 98 | }; |
| 99 | |
| 100 | qspi: quadspi@1550000 { |
| 101 | compatible = "fsl,vf610-qspi"; |
| 102 | #address-cells = <1>; |
| 103 | #size-cells = <0>; |
| 104 | reg = <0x0 0x20c0000 0x0 0x10000>, |
| 105 | <0x0 0x20000000 0x0 0x10000000>; |
| 106 | reg-names = "QuadSPI", "QuadSPI-memory"; |
| 107 | num-cs = <4>; |
| 108 | }; |
Yinbo Zhu | 26caa0e | 2018-09-25 14:47:09 +0800 | [diff] [blame] | 109 | |
| 110 | esdhc: esdhc@2140000 { |
| 111 | compatible = "fsl,esdhc"; |
| 112 | reg = <0x0 0x2140000 0x0 0x10000>; |
| 113 | interrupts = <0 28 0x4>; /* Level high type */ |
| 114 | little-endian; |
| 115 | bus-width = <4>; |
| 116 | }; |
| 117 | |
Ashish Kumar | 55fd8b9 | 2018-02-19 14:16:58 +0530 | [diff] [blame] | 118 | ifc: ifc@1530000 { |
| 119 | compatible = "fsl,ifc", "simple-bus"; |
| 120 | reg = <0x0 0x2240000 0x0 0x20000>; |
| 121 | interrupts = <0 21 0x4>; /* Level high type */ |
| 122 | }; |
Hou Zhiqiang | 6ae9a8c | 2017-09-04 10:47:53 +0800 | [diff] [blame] | 123 | |
Ran Wang | 9a43a6c | 2017-10-23 10:09:24 +0800 | [diff] [blame] | 124 | usb0: usb3@3100000 { |
| 125 | compatible = "fsl,layerscape-dwc3"; |
| 126 | reg = <0x0 0x3100000 0x0 0x10000>; |
| 127 | interrupts = <0 80 0x4>; /* Level high type */ |
| 128 | dr_mode = "host"; |
| 129 | }; |
| 130 | |
| 131 | usb1: usb3@3110000 { |
| 132 | compatible = "fsl,layerscape-dwc3"; |
| 133 | reg = <0x0 0x3110000 0x0 0x10000>; |
| 134 | interrupts = <0 81 0x4>; /* Level high type */ |
| 135 | dr_mode = "host"; |
| 136 | }; |
| 137 | |
Hou Zhiqiang | 6ae9a8c | 2017-09-04 10:47:53 +0800 | [diff] [blame] | 138 | pcie@3400000 { |
| 139 | compatible = "fsl,ls-pcie", "snps,dw-pcie"; |
| 140 | reg = <0x00 0x03400000 0x0 0x80000 /* dbi registers */ |
| 141 | 0x00 0x03480000 0x0 0x80000 /* lut registers */ |
| 142 | 0x00 0x034c0000 0x0 0x40000 /* pf controls registers */ |
| 143 | 0x20 0x00000000 0x0 0x20000>; /* configuration space */ |
| 144 | reg-names = "dbi", "lut", "ctrl", "config"; |
| 145 | #address-cells = <3>; |
| 146 | #size-cells = <2>; |
| 147 | device_type = "pci"; |
| 148 | num-lanes = <4>; |
| 149 | bus-range = <0x0 0xff>; |
| 150 | ranges = <0x81000000 0x0 0x00000000 0x20 0x00020000 0x0 0x00010000 /* downstream I/O */ |
| 151 | 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| 152 | }; |
| 153 | |
| 154 | pcie@3500000 { |
| 155 | compatible = "fsl,ls-pcie", "snps,dw-pcie"; |
| 156 | reg = <0x00 0x03500000 0x0 0x80000 /* dbi registers */ |
| 157 | 0x00 0x03580000 0x0 0x80000 /* lut registers */ |
| 158 | 0x00 0x035c0000 0x0 0x40000 /* pf controls registers */ |
| 159 | 0x28 0x00000000 0x0 0x20000>; /* configuration space */ |
| 160 | reg-names = "dbi", "lut", "ctrl", "config"; |
| 161 | #address-cells = <3>; |
| 162 | #size-cells = <2>; |
| 163 | device_type = "pci"; |
| 164 | num-lanes = <4>; |
| 165 | bus-range = <0x0 0xff>; |
| 166 | ranges = <0x81000000 0x0 0x00000000 0x28 0x00020000 0x0 0x00010000 /* downstream I/O */ |
| 167 | 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| 168 | }; |
| 169 | |
| 170 | pcie@3600000 { |
| 171 | compatible = "fsl,ls-pcie", "snps,dw-pcie"; |
| 172 | reg = <0x00 0x03600000 0x0 0x80000 /* dbi registers */ |
| 173 | 0x00 0x03680000 0x0 0x80000 /* lut registers */ |
| 174 | 0x00 0x036c0000 0x0 0x40000 /* pf controls registers */ |
| 175 | 0x30 0x00000000 0x0 0x20000>; /* configuration space */ |
| 176 | reg-names = "dbi", "lut", "ctrl", "config"; |
| 177 | #address-cells = <3>; |
| 178 | #size-cells = <2>; |
| 179 | device_type = "pci"; |
| 180 | num-lanes = <8>; |
| 181 | bus-range = <0x0 0xff>; |
| 182 | ranges = <0x81000000 0x0 0x00000000 0x30 0x00020000 0x0 0x00010000 /* downstream I/O */ |
| 183 | 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| 184 | }; |
Peng Ma | 47ab834 | 2018-10-22 10:39:50 +0800 | [diff] [blame] | 185 | |
| 186 | sata: sata@3200000 { |
| 187 | compatible = "fsl,ls1088a-ahci"; |
Peng Ma | e70d362 | 2019-04-17 10:10:49 +0000 | [diff] [blame] | 188 | reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */ |
| 189 | 0x7 0x100520 0x0 0x4>; /* ecc sata addr*/ |
| 190 | reg-names = "sata-base", "ecc-addr"; |
Peng Ma | 47ab834 | 2018-10-22 10:39:50 +0800 | [diff] [blame] | 191 | interrupts = <0 133 4>; |
| 192 | status = "disabled"; |
| 193 | }; |
| 194 | |
Mathew McBride | 505ca5d | 2019-10-18 14:27:53 +1100 | [diff] [blame] | 195 | psci { |
| 196 | compatible = "arm,psci-0.2"; |
| 197 | method = "smc"; |
| 198 | }; |
| 199 | |
Ashish Kumar | b25faa2 | 2017-08-31 16:12:53 +0530 | [diff] [blame] | 200 | }; |