blob: 96bc1e9edc8484f42cf58e7ff48f06ca9827caf4 [file] [log] [blame]
Max Krummenachereeb16b22016-11-30 19:43:09 +01001/*
2 * Copyright 2013-2015 Toradex, Inc.
3 *
4 * Configuration settings for the Toradex Colibri iMX6
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9#ifndef __CONFIG_H
10#define __CONFIG_H
11
12#include "mx6_common.h"
Max Krummenachereeb16b22016-11-30 19:43:09 +010013
14#undef CONFIG_DISPLAY_BOARDINFO
15#define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
16
17#define CONFIG_SYS_GENERIC_BOARD
18
19#include <asm/arch/imx-regs.h>
Stefano Babic33731bc2017-06-29 10:16:06 +020020#include <asm/mach-imx/gpio.h>
Max Krummenachereeb16b22016-11-30 19:43:09 +010021
22#ifdef CONFIG_SPL
23#include "imx6_spl.h"
24#define CONFIG_SPL_PAD_TO 0x11000 /* 4k IVT/DCD, 64k SPL */
25#endif
26
27#define CONFIG_CMDLINE_TAG
28#define CONFIG_SETUP_MEMORY_TAGS
29#define CONFIG_INITRD_TAG
30#define CONFIG_REVISION_TAG
31#define CONFIG_SERIAL_TAG
32
33/* Size of malloc() pool */
34#define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024)
35
Max Krummenachereeb16b22016-11-30 19:43:09 +010036#define CONFIG_MISC_INIT_R
37
38#define CONFIG_MXC_UART
39#define CONFIG_MXC_UART_BASE UART1_BASE
40
41/* Make the HW version stuff available in U-Boot env */
42#define CONFIG_VERSION_VARIABLE /* ver environment variable */
43#define CONFIG_ENV_VARS_UBOOT_CONFIG
44#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
45
46/* I2C Configs */
47#define CONFIG_SYS_I2C
48#define CONFIG_SYS_I2C_MXC
49#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
50#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
51#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
52#define CONFIG_SYS_I2C_SPEED 100000
53
54/* OCOTP Configs */
Max Krummenachereeb16b22016-11-30 19:43:09 +010055#ifdef CONFIG_CMD_FUSE
56#define CONFIG_MXC_OCOTP
57#endif
58
59/* MMC Configs */
60#define CONFIG_FSL_ESDHC
61#define CONFIG_FSL_USDHC
62#define CONFIG_SYS_FSL_ESDHC_ADDR 0
63#define CONFIG_SYS_FSL_USDHC_NUM 2
64
65#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
Max Krummenachereeb16b22016-11-30 19:43:09 +010066#define CONFIG_BOUNCE_BUFFER
Max Krummenachereeb16b22016-11-30 19:43:09 +010067
68/* Network */
69#define CONFIG_FEC_MXC
70#define CONFIG_MII
71#define IMX_FEC_BASE ENET_BASE_ADDR
72#define CONFIG_FEC_XCV_TYPE RMII
73#define CONFIG_ETHPRIME "FEC"
74#define CONFIG_FEC_MXC_PHYADDR 1
Max Krummenachereeb16b22016-11-30 19:43:09 +010075#define CONFIG_IP_DEFRAG
76#define CONFIG_TFTP_BLOCKSIZE 16352
77#define CONFIG_TFTP_TSIZE
78
79/* USB Configs */
80/* Host */
81#define CONFIG_USB_HOST_ETHER
82#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
83#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
84#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
85#define CONFIG_MXC_USB_FLAGS 0
Max Krummenachereeb16b22016-11-30 19:43:09 +010086/* Client */
Max Krummenachereeb16b22016-11-30 19:43:09 +010087#define CONFIG_USBD_HS
88
89#define CONFIG_USB_GADGET_MASS_STORAGE
90#define CONFIG_USB_FUNCTION_MASS_STORAGE
Max Krummenachereeb16b22016-11-30 19:43:09 +010091/* USB DFU */
92#define CONFIG_DFU_MMC
93
94/* Miscellaneous commands */
Max Krummenachereeb16b22016-11-30 19:43:09 +010095#define CONFIG_MXC_GPIO
96
97/* Framebuffer and LCD */
98#define CONFIG_VIDEO_IPUV3
99#define CONFIG_SYS_CONSOLE_IS_IN_ENV
100#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
101#define CONFIG_VIDEO_BMP_RLE8
102#define CONFIG_SPLASH_SCREEN
103#define CONFIG_SPLASH_SCREEN_ALIGN
104#define CONFIG_BMP_16BPP
105#define CONFIG_VIDEO_LOGO
106#define CONFIG_VIDEO_BMP_LOGO
107#define CONFIG_IPUV3_CLK 260000000
Max Krummenachereeb16b22016-11-30 19:43:09 +0100108#define CONFIG_CONSOLE_MUX
109#define CONFIG_IMX_HDMI
110#define CONFIG_IMX_VIDEO_SKIP
Max Krummenachereeb16b22016-11-30 19:43:09 +0100111
112/* allow to overwrite serial and ethaddr */
113#define CONFIG_ENV_OVERWRITE
114#define CONFIG_CONS_INDEX 1
Max Krummenachereeb16b22016-11-30 19:43:09 +0100115
116/* Command definition */
117#undef CONFIG_CMD_LOADB
118#undef CONFIG_CMD_LOADS
119#undef CONFIG_CMD_NFS
120#undef CONFIG_CMD_FLASH
121
122#undef CONFIG_IPADDR
123#define CONFIG_IPADDR 192.168.10.2
124#define CONFIG_NETMASK 255.255.255.0
125#undef CONFIG_SERVERIP
126#define CONFIG_SERVERIP 192.168.10.1
127
128#define CONFIG_LOADADDR 0x12000000
129#define CONFIG_SYS_TEXT_BASE 0x17800000
130
131#ifdef CONFIG_CMD_MMC
132#define CONFIG_DRIVE_MMC "mmc "
133#else
134#define CONFIG_DRIVE_MMC
135#endif
136
137#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_MMC
138
139#define DFU_ALT_EMMC_INFO \
140 "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
141 "boot part 0 1;" \
142 "rootfs part 0 2;" \
143 "uImage fat 0 1;" \
144 "imx6q-colibri-eval-v3.dtb fat 0 1;" \
145 "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
146
147#define EMMC_BOOTCMD \
148 "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
149 "rootwait\0" \
150 "emmcboot=run setup; " \
151 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
152 "${vidargs}; echo Booting from internal eMMC chip...; " \
153 "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
154 "${boot_file} && run fdt_fixup && " \
155 "bootm ${kernel_addr_r} ${dtbparam}\0" \
156 "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
157 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
158
159#define MEM_LAYOUT_ENV_SETTINGS \
Stefan Agner35eebee2017-03-09 17:17:51 -0800160 "bootm_size=0x10000000\0" \
Max Krummenachereeb16b22016-11-30 19:43:09 +0100161 "fdt_addr_r=0x12000000\0" \
162 "fdt_high=0xffffffff\0" \
163 "initrd_high=0xffffffff\0" \
164 "kernel_addr_r=0x11000000\0" \
165 "ramdisk_addr_r=0x12100000\0"
166
167#define NFS_BOOTCMD \
168 "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
169 "nfsboot=run setup; " \
170 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
171 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
172 "run nfsdtbload; dhcp ${kernel_addr_r} " \
173 "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
174 "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
175 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
176
177#define SD_BOOTCMD \
178 "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
179 "rootwait\0" \
180 "sdboot=run setup; " \
181 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
182 "${vidargs}; echo Booting from SD card; " \
183 "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
184 "${boot_file} && run fdt_fixup && " \
185 "bootm ${kernel_addr_r} ${dtbparam}\0" \
186 "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
187 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
188
189#define USB_BOOTCMD \
190 "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
191 "rootwait\0" \
192 "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
193 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
194 "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
195 "${boot_file} && run fdt_fixup && " \
196 "bootm ${kernel_addr_r} ${dtbparam}\0" \
197 "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
198 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
199
200#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
201#define CONFIG_EXTRA_ENV_SETTINGS \
202 "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
203 "run nfsboot ; echo ; echo nfsboot failed ; " \
204 "usb start ;" \
205 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
206 "boot_file=uImage\0" \
207 "console=ttymxc0\0" \
208 "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
209 "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
210 EMMC_BOOTCMD \
211 "fdt_file=" FDT_FILE "\0" \
212 "fdt_fixup=;\0" \
213 MEM_LAYOUT_ENV_SETTINGS \
214 NFS_BOOTCMD \
215 SD_BOOTCMD \
216 "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
217 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
218 "flash_eth.img && source ${loadaddr}\0" \
219 "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
220 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
221 "source ${loadaddr}\0" \
222 "setup=setenv setupargs fec_mac=${ethaddr} " \
223 "consoleblank=0 no_console_suspend=1 console=tty1 " \
224 "console=${console},${baudrate}n8\0 " \
225 "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
226 "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
227 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
228 "source ${loadaddr}\0" \
229 "splashpos=m,m\0" \
230 "vidargs=video=mxcfb0:dev=lcd,640x480M@60,if=RGB666 " \
231 "video=mxcfb1:off fbmem=8M\0 "
232
233/* Miscellaneous configurable options */
234#define CONFIG_SYS_LONGHELP
235#define CONFIG_AUTO_COMPLETE
236#undef CONFIG_SYS_CBSIZE
237#define CONFIG_SYS_CBSIZE 1024
238#undef CONFIG_SYS_MAXARGS
239#define CONFIG_SYS_MAXARGS 48
240
241#define CONFIG_SYS_ALT_MEMTEST
242#define CONFIG_SYS_MEMTEST_START 0x10000000
243#define CONFIG_SYS_MEMTEST_END 0x10010000
244#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
245
246#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
247
248#define CONFIG_CMDLINE_EDITING
249
250/* Physical Memory Map */
251#define CONFIG_NR_DRAM_BANKS 1
252#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
253
254#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
255#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
256#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
257
258#define CONFIG_SYS_INIT_SP_OFFSET \
259 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
260#define CONFIG_SYS_INIT_SP_ADDR \
261 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
262
Masahiro Yamada8cea9b52017-02-11 22:43:54 +0900263/* environment organization */
Max Krummenachereeb16b22016-11-30 19:43:09 +0100264#define CONFIG_ENV_SIZE (8 * 1024)
265
Max Krummenachereeb16b22016-11-30 19:43:09 +0100266#if defined(CONFIG_ENV_IS_IN_MMC)
267/* Environment in eMMC, before config block at the end of 1st "boot sector" */
268#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \
269 CONFIG_TDX_CFG_BLOCK_OFFSET)
270#define CONFIG_SYS_MMC_ENV_DEV 0
271#define CONFIG_SYS_MMC_ENV_PART 1
272#endif
273
274#define CONFIG_OF_SYSTEM_SETUP
275
276#define CONFIG_CMD_TIME
277
278#define CONFIG_SUPPORT_RAW_INITRD
279
Max Krummenachereeb16b22016-11-30 19:43:09 +0100280#endif /* __CONFIG_H */