Dirk Eibach | f74a027 | 2014-11-13 19:21:18 +0100 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2014 |
| 3 | * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc |
| 4 | * |
| 5 | * SPDX-License-Identifier: GPL-2.0+ |
| 6 | */ |
| 7 | |
| 8 | #include <common.h> |
| 9 | #include <command.h> |
| 10 | |
| 11 | #include <gdsys_fpga.h> |
| 12 | |
| 13 | enum { |
| 14 | STATE_TX_PACKET_BUILDING = 1<<0, |
| 15 | STATE_TX_TRANSMITTING = 1<<1, |
| 16 | STATE_TX_BUFFER_FULL = 1<<2, |
| 17 | STATE_TX_ERR = 1<<3, |
| 18 | STATE_RECEIVE_TIMEOUT = 1<<4, |
| 19 | STATE_PROC_RX_STORE_TIMEOUT = 1<<5, |
| 20 | STATE_PROC_RX_RECEIVE_TIMEOUT = 1<<6, |
| 21 | STATE_RX_DIST_ERR = 1<<7, |
| 22 | STATE_RX_LENGTH_ERR = 1<<8, |
| 23 | STATE_RX_FRAME_CTR_ERR = 1<<9, |
| 24 | STATE_RX_FCS_ERR = 1<<10, |
| 25 | STATE_RX_PACKET_DROPPED = 1<<11, |
| 26 | STATE_RX_DATA_LAST = 1<<12, |
| 27 | STATE_RX_DATA_FIRST = 1<<13, |
| 28 | STATE_RX_DATA_AVAILABLE = 1<<15, |
| 29 | }; |
| 30 | |
| 31 | enum { |
| 32 | CTRL_PROC_RECEIVE_ENABLE = 1<<12, |
| 33 | CTRL_FLUSH_TRANSMIT_BUFFER = 1<<15, |
| 34 | }; |
| 35 | |
| 36 | enum { |
| 37 | IRQ_CPU_TRANSMITBUFFER_FREE_STATUS = 1<<5, |
| 38 | IRQ_CPU_PACKET_TRANSMITTED_EVENT = 1<<6, |
| 39 | IRQ_NEW_CPU_PACKET_RECEIVED_EVENT = 1<<7, |
| 40 | IRQ_CPU_RECEIVE_DATA_AVAILABLE_STATUS = 1<<8, |
| 41 | }; |
| 42 | |
| 43 | struct io_generic_packet { |
| 44 | u16 target_address; |
| 45 | u16 source_address; |
| 46 | u8 packet_type; |
| 47 | u8 bc; |
| 48 | u16 packet_length; |
| 49 | } __attribute__((__packed__)); |
| 50 | |
| 51 | unsigned long long rx_ctr; |
| 52 | unsigned long long tx_ctr; |
| 53 | unsigned long long err_ctr; |
| 54 | |
| 55 | static void io_check_status(unsigned int fpga, u16 status, bool silent) |
| 56 | { |
| 57 | u16 mask = STATE_RX_DIST_ERR | STATE_RX_LENGTH_ERR | |
| 58 | STATE_RX_FRAME_CTR_ERR | STATE_RX_FCS_ERR | |
| 59 | STATE_RX_PACKET_DROPPED | STATE_TX_ERR; |
| 60 | |
| 61 | if (!(status & mask)) { |
| 62 | FPGA_SET_REG(fpga, ep.rx_tx_status, status); |
| 63 | return; |
| 64 | } |
| 65 | |
| 66 | err_ctr++; |
| 67 | FPGA_SET_REG(fpga, ep.rx_tx_status, status); |
| 68 | |
| 69 | if (silent) |
| 70 | return; |
| 71 | |
| 72 | if (status & STATE_RX_PACKET_DROPPED) |
| 73 | printf("RX_PACKET_DROPPED, status %04x\n", status); |
| 74 | |
| 75 | if (status & STATE_RX_DIST_ERR) |
| 76 | printf("RX_DIST_ERR\n"); |
| 77 | if (status & STATE_RX_LENGTH_ERR) |
| 78 | printf("RX_LENGTH_ERR\n"); |
| 79 | if (status & STATE_RX_FRAME_CTR_ERR) |
| 80 | printf("RX_FRAME_CTR_ERR\n"); |
| 81 | if (status & STATE_RX_FCS_ERR) |
| 82 | printf("RX_FCS_ERR\n"); |
| 83 | |
| 84 | if (status & STATE_TX_ERR) |
| 85 | printf("TX_ERR\n"); |
| 86 | } |
| 87 | |
| 88 | static void io_send(unsigned int fpga, unsigned int size) |
| 89 | { |
| 90 | unsigned int k; |
| 91 | struct io_generic_packet packet = { |
| 92 | .source_address = 1, |
| 93 | .packet_type = 1, |
| 94 | .packet_length = size, |
| 95 | }; |
| 96 | u16 *p = (u16 *)&packet; |
| 97 | |
| 98 | for (k = 0; k < sizeof(packet) / 2; ++k) |
| 99 | FPGA_SET_REG(fpga, ep.transmit_data, *p++); |
| 100 | |
| 101 | for (k = 0; k < (size + 1) / 2; ++k) |
| 102 | FPGA_SET_REG(fpga, ep.transmit_data, k); |
| 103 | |
| 104 | FPGA_SET_REG(fpga, ep.rx_tx_control, |
| 105 | CTRL_PROC_RECEIVE_ENABLE | CTRL_FLUSH_TRANSMIT_BUFFER); |
| 106 | |
| 107 | tx_ctr++; |
| 108 | } |
| 109 | |
| 110 | static void io_receive(unsigned int fpga) |
| 111 | { |
| 112 | unsigned int k = 0; |
| 113 | u16 rx_tx_status; |
| 114 | |
| 115 | FPGA_GET_REG(fpga, ep.rx_tx_status, &rx_tx_status); |
| 116 | |
| 117 | while (rx_tx_status & STATE_RX_DATA_AVAILABLE) { |
| 118 | u16 rx; |
| 119 | |
| 120 | if (rx_tx_status & STATE_RX_DATA_LAST) |
| 121 | rx_ctr++; |
| 122 | |
| 123 | FPGA_GET_REG(fpga, ep.receive_data, &rx); |
| 124 | |
| 125 | FPGA_GET_REG(fpga, ep.rx_tx_status, &rx_tx_status); |
| 126 | |
| 127 | ++k; |
| 128 | } |
| 129 | } |
| 130 | |
| 131 | static void io_reflect(unsigned int fpga) |
| 132 | { |
| 133 | u16 buffer[128]; |
| 134 | |
| 135 | unsigned int k = 0; |
| 136 | unsigned int n; |
| 137 | u16 rx_tx_status; |
| 138 | |
| 139 | FPGA_GET_REG(fpga, ep.rx_tx_status, &rx_tx_status); |
| 140 | |
| 141 | while (rx_tx_status & STATE_RX_DATA_AVAILABLE) { |
| 142 | FPGA_GET_REG(fpga, ep.receive_data, &buffer[k++]); |
| 143 | if (rx_tx_status & STATE_RX_DATA_LAST) |
| 144 | break; |
| 145 | |
| 146 | FPGA_GET_REG(fpga, ep.rx_tx_status, &rx_tx_status); |
| 147 | } |
| 148 | |
| 149 | if (!k) |
| 150 | return; |
| 151 | |
| 152 | for (n = 0; n < k; ++n) |
| 153 | FPGA_SET_REG(fpga, ep.transmit_data, buffer[n]); |
| 154 | |
| 155 | FPGA_SET_REG(fpga, ep.rx_tx_control, |
| 156 | CTRL_PROC_RECEIVE_ENABLE | CTRL_FLUSH_TRANSMIT_BUFFER); |
| 157 | |
| 158 | tx_ctr++; |
| 159 | } |
| 160 | |
| 161 | /* |
| 162 | * FPGA io-endpoint reflector |
| 163 | * |
| 164 | * Syntax: |
| 165 | * ioreflect {fpga} {reportrate} |
| 166 | */ |
| 167 | int do_ioreflect(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| 168 | { |
| 169 | unsigned int fpga; |
| 170 | unsigned int rate = 0; |
| 171 | unsigned long long last_seen = 0; |
| 172 | |
| 173 | if (argc < 2) |
| 174 | return CMD_RET_USAGE; |
| 175 | |
| 176 | fpga = simple_strtoul(argv[1], NULL, 10); |
| 177 | |
| 178 | /* |
| 179 | * If another parameter, it is the report rate in packets. |
| 180 | */ |
| 181 | if (argc > 2) |
| 182 | rate = simple_strtoul(argv[2], NULL, 10); |
| 183 | |
| 184 | /* enable receive path */ |
| 185 | FPGA_SET_REG(fpga, ep.rx_tx_control, CTRL_PROC_RECEIVE_ENABLE); |
| 186 | |
| 187 | /* set device address to dummy 1*/ |
| 188 | FPGA_SET_REG(fpga, ep.device_address, 1); |
| 189 | |
| 190 | rx_ctr = 0; tx_ctr = 0; err_ctr = 0; |
| 191 | |
| 192 | while (1) { |
| 193 | u16 top_int; |
| 194 | u16 rx_tx_status; |
| 195 | |
| 196 | FPGA_GET_REG(fpga, top_interrupt, &top_int); |
| 197 | FPGA_GET_REG(fpga, ep.rx_tx_status, &rx_tx_status); |
| 198 | |
| 199 | io_check_status(fpga, rx_tx_status, true); |
| 200 | if ((top_int & IRQ_CPU_RECEIVE_DATA_AVAILABLE_STATUS) && |
| 201 | (top_int & IRQ_CPU_TRANSMITBUFFER_FREE_STATUS)) |
| 202 | io_reflect(fpga); |
| 203 | |
| 204 | if (rate) { |
| 205 | if (!(tx_ctr % rate) && (tx_ctr != last_seen)) |
| 206 | printf("refl %llu, err %llu\n", tx_ctr, |
| 207 | err_ctr); |
| 208 | last_seen = tx_ctr; |
| 209 | } |
| 210 | |
| 211 | if (ctrlc()) |
| 212 | break; |
| 213 | } |
| 214 | |
| 215 | return 0; |
| 216 | } |
| 217 | |
| 218 | /* |
| 219 | * FPGA io-endpoint looptest |
| 220 | * |
| 221 | * Syntax: |
| 222 | * ioloop {fpga} {size} {rate} |
| 223 | */ |
| 224 | #define DISP_LINE_LEN 16 |
| 225 | int do_ioloop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| 226 | { |
| 227 | unsigned int fpga; |
| 228 | unsigned int size; |
| 229 | unsigned int rate = 0; |
| 230 | |
| 231 | if (argc < 3) |
| 232 | return CMD_RET_USAGE; |
| 233 | |
| 234 | /* |
| 235 | * FPGA is specified since argc > 2 |
| 236 | */ |
| 237 | fpga = simple_strtoul(argv[1], NULL, 10); |
| 238 | |
| 239 | /* |
| 240 | * packet size is specified since argc > 2 |
| 241 | */ |
| 242 | size = simple_strtoul(argv[2], NULL, 10); |
| 243 | |
| 244 | /* |
| 245 | * If another parameter, it is the test rate in packets per second. |
| 246 | */ |
| 247 | if (argc > 3) |
| 248 | rate = simple_strtoul(argv[3], NULL, 10); |
| 249 | |
| 250 | /* enable receive path */ |
| 251 | FPGA_SET_REG(fpga, ep.rx_tx_control, CTRL_PROC_RECEIVE_ENABLE); |
| 252 | |
| 253 | /* set device address to dummy 1*/ |
| 254 | FPGA_SET_REG(fpga, ep.device_address, 1); |
| 255 | |
| 256 | rx_ctr = 0; tx_ctr = 0; err_ctr = 0; |
| 257 | |
| 258 | while (1) { |
| 259 | u16 top_int; |
| 260 | u16 rx_tx_status; |
| 261 | |
| 262 | FPGA_GET_REG(fpga, top_interrupt, &top_int); |
| 263 | FPGA_GET_REG(fpga, ep.rx_tx_status, &rx_tx_status); |
| 264 | |
| 265 | io_check_status(fpga, rx_tx_status, false); |
| 266 | if (top_int & IRQ_CPU_TRANSMITBUFFER_FREE_STATUS) |
| 267 | io_send(fpga, size); |
| 268 | if (top_int & IRQ_CPU_RECEIVE_DATA_AVAILABLE_STATUS) |
| 269 | io_receive(fpga); |
| 270 | |
| 271 | if (rate) { |
| 272 | if (ctrlc()) |
| 273 | break; |
| 274 | udelay(1000000 / rate); |
| 275 | if (!(tx_ctr % rate)) |
| 276 | printf("d %lld, tx %llu, rx %llu, err %llu\n", |
| 277 | tx_ctr - rx_ctr, tx_ctr, rx_ctr, |
| 278 | err_ctr); |
| 279 | } |
| 280 | } |
| 281 | |
| 282 | return 0; |
| 283 | } |
| 284 | |
| 285 | U_BOOT_CMD( |
| 286 | ioloop, 4, 0, do_ioloop, |
| 287 | "fpga io-endpoint looptest", |
| 288 | "fpga packetsize [packets/sec]" |
| 289 | ); |
| 290 | |
| 291 | U_BOOT_CMD( |
| 292 | ioreflect, 3, 0, do_ioreflect, |
| 293 | "fpga io-endpoint reflector", |
| 294 | "fpga reportrate" |
| 295 | ); |