Tom Rini | 10e4779 | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 2 | /* |
| 3 | * Copyright (C) 2012 Samsung Electronics |
| 4 | * |
| 5 | * Author: InKi Dae <inki.dae@samsung.com> |
| 6 | * Author: Donghwa Lee <dh09.lee@samsung.com> |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 7 | */ |
| 8 | |
| 9 | #include <common.h> |
Simon Glass | 0f2af88 | 2020-05-10 11:40:05 -0600 | [diff] [blame] | 10 | #include <log.h> |
Simon Glass | dbd7954 | 2020-05-10 11:40:11 -0600 | [diff] [blame] | 11 | #include <linux/delay.h> |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 12 | #include <linux/err.h> |
| 13 | #include <asm/arch/dsim.h> |
| 14 | #include <asm/arch/mipi_dsim.h> |
| 15 | |
| 16 | #include "exynos_mipi_dsi_lowlevel.h" |
| 17 | |
| 18 | #define MHZ (1000 * 1000) |
| 19 | #define FIN_HZ (24 * MHZ) |
| 20 | |
| 21 | #define DFIN_PLL_MIN_HZ (6 * MHZ) |
| 22 | #define DFIN_PLL_MAX_HZ (12 * MHZ) |
| 23 | |
| 24 | #define DFVCO_MIN_HZ (500 * MHZ) |
| 25 | #define DFVCO_MAX_HZ (1000 * MHZ) |
| 26 | |
| 27 | #define TRY_GET_FIFO_TIMEOUT (5000 * 2) |
| 28 | |
| 29 | /* MIPI-DSIM status types. */ |
| 30 | enum { |
| 31 | DSIM_STATE_INIT, /* should be initialized. */ |
| 32 | DSIM_STATE_STOP, /* CPU and LCDC are LP mode. */ |
| 33 | DSIM_STATE_HSCLKEN, /* HS clock was enabled. */ |
| 34 | DSIM_STATE_ULPS |
| 35 | }; |
| 36 | |
| 37 | /* define DSI lane types. */ |
| 38 | enum { |
| 39 | DSIM_LANE_CLOCK = (1 << 0), |
| 40 | DSIM_LANE_DATA0 = (1 << 1), |
| 41 | DSIM_LANE_DATA1 = (1 << 2), |
| 42 | DSIM_LANE_DATA2 = (1 << 3), |
| 43 | DSIM_LANE_DATA3 = (1 << 4) |
| 44 | }; |
| 45 | |
| 46 | static unsigned int dpll_table[15] = { |
| 47 | 100, 120, 170, 220, 270, |
| 48 | 320, 390, 450, 510, 560, |
| 49 | 640, 690, 770, 870, 950 |
| 50 | }; |
| 51 | |
| 52 | static void exynos_mipi_dsi_long_data_wr(struct mipi_dsim_device *dsim, |
Donghwa Lee | 934d9b8 | 2013-08-05 13:34:32 +0900 | [diff] [blame] | 53 | const unsigned char *data0, unsigned int data1) |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 54 | { |
| 55 | unsigned int data_cnt = 0, payload = 0; |
| 56 | |
| 57 | /* in case that data count is more then 4 */ |
| 58 | for (data_cnt = 0; data_cnt < data1; data_cnt += 4) { |
| 59 | /* |
| 60 | * after sending 4bytes per one time, |
| 61 | * send remainder data less then 4. |
| 62 | */ |
| 63 | if ((data1 - data_cnt) < 4) { |
| 64 | if ((data1 - data_cnt) == 3) { |
Donghwa Lee | 934d9b8 | 2013-08-05 13:34:32 +0900 | [diff] [blame] | 65 | payload = data0[data_cnt] | |
| 66 | data0[data_cnt + 1] << 8 | |
| 67 | data0[data_cnt + 2] << 16; |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 68 | debug("count = 3 payload = %x, %x %x %x\n", |
Donghwa Lee | 934d9b8 | 2013-08-05 13:34:32 +0900 | [diff] [blame] | 69 | payload, data0[data_cnt], |
| 70 | data0[data_cnt + 1], |
| 71 | data0[data_cnt + 2]); |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 72 | } else if ((data1 - data_cnt) == 2) { |
Donghwa Lee | 934d9b8 | 2013-08-05 13:34:32 +0900 | [diff] [blame] | 73 | payload = data0[data_cnt] | |
| 74 | data0[data_cnt + 1] << 8; |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 75 | debug("count = 2 payload = %x, %x %x\n", payload, |
Donghwa Lee | 934d9b8 | 2013-08-05 13:34:32 +0900 | [diff] [blame] | 76 | data0[data_cnt], data0[data_cnt + 1]); |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 77 | } else if ((data1 - data_cnt) == 1) { |
Donghwa Lee | 934d9b8 | 2013-08-05 13:34:32 +0900 | [diff] [blame] | 78 | payload = data0[data_cnt]; |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 79 | } |
| 80 | } else { |
| 81 | /* send 4bytes per one time. */ |
Donghwa Lee | 934d9b8 | 2013-08-05 13:34:32 +0900 | [diff] [blame] | 82 | payload = data0[data_cnt] | |
| 83 | data0[data_cnt + 1] << 8 | |
| 84 | data0[data_cnt + 2] << 16 | |
| 85 | data0[data_cnt + 3] << 24; |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 86 | |
| 87 | debug("count = 4 payload = %x, %x %x %x %x\n", |
| 88 | payload, *(u8 *)(data0 + data_cnt), |
Donghwa Lee | 934d9b8 | 2013-08-05 13:34:32 +0900 | [diff] [blame] | 89 | data0[data_cnt + 1], |
| 90 | data0[data_cnt + 2], |
| 91 | data0[data_cnt + 3]); |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 92 | } |
| 93 | exynos_mipi_dsi_wr_tx_data(dsim, payload); |
| 94 | } |
| 95 | } |
| 96 | |
| 97 | int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, |
Donghwa Lee | 934d9b8 | 2013-08-05 13:34:32 +0900 | [diff] [blame] | 98 | const unsigned char *data0, unsigned int data1) |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 99 | { |
| 100 | unsigned int timeout = TRY_GET_FIFO_TIMEOUT; |
| 101 | unsigned long delay_val, delay; |
| 102 | unsigned int check_rx_ack = 0; |
| 103 | |
| 104 | if (dsim->state == DSIM_STATE_ULPS) { |
| 105 | debug("state is ULPS.\n"); |
| 106 | |
| 107 | return -EINVAL; |
| 108 | } |
| 109 | |
| 110 | delay_val = MHZ / dsim->dsim_config->esc_clk; |
| 111 | delay = 10 * delay_val; |
| 112 | |
| 113 | mdelay(delay); |
| 114 | |
| 115 | /* only if transfer mode is LPDT, wait SFR becomes empty. */ |
| 116 | if (dsim->state == DSIM_STATE_STOP) { |
| 117 | while (!(exynos_mipi_dsi_get_fifo_state(dsim) & |
| 118 | SFR_HEADER_EMPTY)) { |
| 119 | if ((timeout--) > 0) |
| 120 | mdelay(1); |
| 121 | else { |
| 122 | debug("SRF header fifo is not empty.\n"); |
| 123 | return -EINVAL; |
| 124 | } |
| 125 | } |
| 126 | } |
| 127 | |
| 128 | switch (data_id) { |
| 129 | /* short packet types of packet types for command. */ |
| 130 | case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM: |
| 131 | case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM: |
| 132 | case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM: |
| 133 | case MIPI_DSI_DCS_SHORT_WRITE: |
| 134 | case MIPI_DSI_DCS_SHORT_WRITE_PARAM: |
| 135 | case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE: |
| 136 | debug("data0 = %x data1 = %x\n", |
Donghwa Lee | 934d9b8 | 2013-08-05 13:34:32 +0900 | [diff] [blame] | 137 | data0[0], data0[1]); |
| 138 | exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]); |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 139 | if (check_rx_ack) { |
| 140 | /* process response func should be implemented */ |
| 141 | return 0; |
| 142 | } else { |
| 143 | return -EINVAL; |
| 144 | } |
| 145 | |
| 146 | /* general command */ |
| 147 | case MIPI_DSI_COLOR_MODE_OFF: |
| 148 | case MIPI_DSI_COLOR_MODE_ON: |
| 149 | case MIPI_DSI_SHUTDOWN_PERIPHERAL: |
| 150 | case MIPI_DSI_TURN_ON_PERIPHERAL: |
Donghwa Lee | 934d9b8 | 2013-08-05 13:34:32 +0900 | [diff] [blame] | 151 | exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]); |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 152 | if (check_rx_ack) { |
| 153 | /* process response func should be implemented. */ |
| 154 | return 0; |
| 155 | } else { |
| 156 | return -EINVAL; |
| 157 | } |
| 158 | |
| 159 | /* packet types for video data */ |
| 160 | case MIPI_DSI_V_SYNC_START: |
| 161 | case MIPI_DSI_V_SYNC_END: |
| 162 | case MIPI_DSI_H_SYNC_START: |
| 163 | case MIPI_DSI_H_SYNC_END: |
| 164 | case MIPI_DSI_END_OF_TRANSMISSION: |
| 165 | return 0; |
| 166 | |
| 167 | /* short and response packet types for command */ |
| 168 | case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM: |
| 169 | case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM: |
| 170 | case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM: |
| 171 | case MIPI_DSI_DCS_READ: |
| 172 | exynos_mipi_dsi_clear_all_interrupt(dsim); |
Donghwa Lee | 934d9b8 | 2013-08-05 13:34:32 +0900 | [diff] [blame] | 173 | exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]); |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 174 | /* process response func should be implemented. */ |
| 175 | return 0; |
| 176 | |
| 177 | /* long packet type and null packet */ |
| 178 | case MIPI_DSI_NULL_PACKET: |
| 179 | case MIPI_DSI_BLANKING_PACKET: |
| 180 | return 0; |
| 181 | case MIPI_DSI_GENERIC_LONG_WRITE: |
| 182 | case MIPI_DSI_DCS_LONG_WRITE: |
| 183 | { |
Donghwa Lee | 934d9b8 | 2013-08-05 13:34:32 +0900 | [diff] [blame] | 184 | unsigned int payload = 0; |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 185 | |
| 186 | /* if data count is less then 4, then send 3bytes data. */ |
| 187 | if (data1 < 4) { |
Donghwa Lee | 934d9b8 | 2013-08-05 13:34:32 +0900 | [diff] [blame] | 188 | payload = data0[0] | |
| 189 | data0[1] << 8 | |
| 190 | data0[2] << 16; |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 191 | |
| 192 | exynos_mipi_dsi_wr_tx_data(dsim, payload); |
| 193 | |
| 194 | debug("count = %d payload = %x,%x %x %x\n", |
Donghwa Lee | 934d9b8 | 2013-08-05 13:34:32 +0900 | [diff] [blame] | 195 | data1, payload, data0[0], |
| 196 | data0[1], data0[2]); |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 197 | } else { |
| 198 | /* in case that data count is more then 4 */ |
| 199 | exynos_mipi_dsi_long_data_wr(dsim, data0, data1); |
| 200 | } |
| 201 | |
| 202 | /* put data into header fifo */ |
| 203 | exynos_mipi_dsi_wr_tx_header(dsim, data_id, data1 & 0xff, |
| 204 | (data1 & 0xff00) >> 8); |
| 205 | |
| 206 | } |
| 207 | if (check_rx_ack) |
| 208 | /* process response func should be implemented. */ |
| 209 | return 0; |
| 210 | else |
| 211 | return -EINVAL; |
| 212 | |
| 213 | /* packet typo for video data */ |
| 214 | case MIPI_DSI_PACKED_PIXEL_STREAM_16: |
| 215 | case MIPI_DSI_PACKED_PIXEL_STREAM_18: |
| 216 | case MIPI_DSI_PIXEL_STREAM_3BYTE_18: |
| 217 | case MIPI_DSI_PACKED_PIXEL_STREAM_24: |
| 218 | if (check_rx_ack) { |
| 219 | /* process response func should be implemented. */ |
| 220 | return 0; |
| 221 | } else { |
| 222 | return -EINVAL; |
| 223 | } |
| 224 | default: |
| 225 | debug("data id %x is not supported current DSI spec.\n", |
| 226 | data_id); |
| 227 | |
| 228 | return -EINVAL; |
| 229 | } |
| 230 | |
| 231 | return 0; |
| 232 | } |
| 233 | |
| 234 | int exynos_mipi_dsi_pll_on(struct mipi_dsim_device *dsim, unsigned int enable) |
| 235 | { |
| 236 | int sw_timeout; |
| 237 | |
| 238 | if (enable) { |
| 239 | sw_timeout = 1000; |
| 240 | |
| 241 | exynos_mipi_dsi_clear_interrupt(dsim); |
| 242 | exynos_mipi_dsi_enable_pll(dsim, 1); |
| 243 | while (1) { |
| 244 | sw_timeout--; |
| 245 | if (exynos_mipi_dsi_is_pll_stable(dsim)) |
| 246 | return 0; |
| 247 | if (sw_timeout == 0) |
| 248 | return -EINVAL; |
| 249 | } |
| 250 | } else |
| 251 | exynos_mipi_dsi_enable_pll(dsim, 0); |
| 252 | |
| 253 | return 0; |
| 254 | } |
| 255 | |
| 256 | unsigned long exynos_mipi_dsi_change_pll(struct mipi_dsim_device *dsim, |
| 257 | unsigned int pre_divider, unsigned int main_divider, |
| 258 | unsigned int scaler) |
| 259 | { |
| 260 | unsigned long dfin_pll, dfvco, dpll_out; |
| 261 | unsigned int i, freq_band = 0xf; |
| 262 | |
| 263 | dfin_pll = (FIN_HZ / pre_divider); |
| 264 | |
| 265 | /****************************************************** |
| 266 | * Serial Clock(=ByteClk X 8) FreqBand[3:0] * |
| 267 | ****************************************************** |
| 268 | * ~ 99.99 MHz 0000 |
| 269 | * 100 ~ 119.99 MHz 0001 |
| 270 | * 120 ~ 159.99 MHz 0010 |
| 271 | * 160 ~ 199.99 MHz 0011 |
| 272 | * 200 ~ 239.99 MHz 0100 |
| 273 | * 140 ~ 319.99 MHz 0101 |
| 274 | * 320 ~ 389.99 MHz 0110 |
| 275 | * 390 ~ 449.99 MHz 0111 |
| 276 | * 450 ~ 509.99 MHz 1000 |
| 277 | * 510 ~ 559.99 MHz 1001 |
| 278 | * 560 ~ 639.99 MHz 1010 |
| 279 | * 640 ~ 689.99 MHz 1011 |
| 280 | * 690 ~ 769.99 MHz 1100 |
| 281 | * 770 ~ 869.99 MHz 1101 |
| 282 | * 870 ~ 949.99 MHz 1110 |
| 283 | * 950 ~ 1000 MHz 1111 |
| 284 | ******************************************************/ |
| 285 | if (dfin_pll < DFIN_PLL_MIN_HZ || dfin_pll > DFIN_PLL_MAX_HZ) { |
| 286 | debug("fin_pll range should be 6MHz ~ 12MHz\n"); |
| 287 | exynos_mipi_dsi_enable_afc(dsim, 0, 0); |
| 288 | } else { |
| 289 | if (dfin_pll < 7 * MHZ) |
| 290 | exynos_mipi_dsi_enable_afc(dsim, 1, 0x1); |
| 291 | else if (dfin_pll < 8 * MHZ) |
| 292 | exynos_mipi_dsi_enable_afc(dsim, 1, 0x0); |
| 293 | else if (dfin_pll < 9 * MHZ) |
| 294 | exynos_mipi_dsi_enable_afc(dsim, 1, 0x3); |
| 295 | else if (dfin_pll < 10 * MHZ) |
| 296 | exynos_mipi_dsi_enable_afc(dsim, 1, 0x2); |
| 297 | else if (dfin_pll < 11 * MHZ) |
| 298 | exynos_mipi_dsi_enable_afc(dsim, 1, 0x5); |
| 299 | else |
| 300 | exynos_mipi_dsi_enable_afc(dsim, 1, 0x4); |
| 301 | } |
| 302 | |
| 303 | dfvco = dfin_pll * main_divider; |
| 304 | debug("dfvco = %lu, dfin_pll = %lu, main_divider = %d\n", |
| 305 | dfvco, dfin_pll, main_divider); |
| 306 | if (dfvco < DFVCO_MIN_HZ || dfvco > DFVCO_MAX_HZ) |
| 307 | debug("fvco range should be 500MHz ~ 1000MHz\n"); |
| 308 | |
| 309 | dpll_out = dfvco / (1 << scaler); |
| 310 | debug("dpll_out = %lu, dfvco = %lu, scaler = %d\n", |
| 311 | dpll_out, dfvco, scaler); |
| 312 | |
| 313 | for (i = 0; i < ARRAY_SIZE(dpll_table); i++) { |
| 314 | if (dpll_out < dpll_table[i] * MHZ) { |
| 315 | freq_band = i; |
| 316 | break; |
| 317 | } |
| 318 | } |
| 319 | |
| 320 | debug("freq_band = %d\n", freq_band); |
| 321 | |
| 322 | exynos_mipi_dsi_pll_freq(dsim, pre_divider, main_divider, scaler); |
| 323 | |
| 324 | exynos_mipi_dsi_hs_zero_ctrl(dsim, 0); |
| 325 | exynos_mipi_dsi_prep_ctrl(dsim, 0); |
| 326 | |
| 327 | /* Freq Band */ |
| 328 | exynos_mipi_dsi_pll_freq_band(dsim, freq_band); |
| 329 | |
| 330 | /* Stable time */ |
| 331 | exynos_mipi_dsi_pll_stable_time(dsim, |
| 332 | dsim->dsim_config->pll_stable_time); |
| 333 | |
| 334 | /* Enable PLL */ |
| 335 | debug("FOUT of mipi dphy pll is %luMHz\n", |
| 336 | (dpll_out / MHZ)); |
| 337 | |
| 338 | return dpll_out; |
| 339 | } |
| 340 | |
| 341 | int exynos_mipi_dsi_set_clock(struct mipi_dsim_device *dsim, |
| 342 | unsigned int byte_clk_sel, unsigned int enable) |
| 343 | { |
| 344 | unsigned int esc_div; |
| 345 | unsigned long esc_clk_error_rate; |
| 346 | unsigned long hs_clk = 0, byte_clk = 0, escape_clk = 0; |
| 347 | |
| 348 | if (enable) { |
| 349 | dsim->e_clk_src = byte_clk_sel; |
| 350 | |
| 351 | /* Escape mode clock and byte clock source */ |
| 352 | exynos_mipi_dsi_set_byte_clock_src(dsim, byte_clk_sel); |
| 353 | |
| 354 | /* DPHY, DSIM Link : D-PHY clock out */ |
| 355 | if (byte_clk_sel == DSIM_PLL_OUT_DIV8) { |
| 356 | hs_clk = exynos_mipi_dsi_change_pll(dsim, |
| 357 | dsim->dsim_config->p, dsim->dsim_config->m, |
| 358 | dsim->dsim_config->s); |
| 359 | if (hs_clk == 0) { |
| 360 | debug("failed to get hs clock.\n"); |
| 361 | return -EINVAL; |
| 362 | } |
| 363 | |
| 364 | byte_clk = hs_clk / 8; |
| 365 | exynos_mipi_dsi_enable_pll_bypass(dsim, 0); |
| 366 | exynos_mipi_dsi_pll_on(dsim, 1); |
| 367 | /* DPHY : D-PHY clock out, DSIM link : external clock out */ |
| 368 | } else if (byte_clk_sel == DSIM_EXT_CLK_DIV8) |
| 369 | debug("not support EXT CLK source for MIPI DSIM\n"); |
| 370 | else if (byte_clk_sel == DSIM_EXT_CLK_BYPASS) |
| 371 | debug("not support EXT CLK source for MIPI DSIM\n"); |
| 372 | |
| 373 | /* escape clock divider */ |
| 374 | esc_div = byte_clk / (dsim->dsim_config->esc_clk); |
| 375 | debug("esc_div = %d, byte_clk = %lu, esc_clk = %lu\n", |
| 376 | esc_div, byte_clk, dsim->dsim_config->esc_clk); |
| 377 | if ((byte_clk / esc_div) >= (20 * MHZ) || |
| 378 | (byte_clk / esc_div) > dsim->dsim_config->esc_clk) |
| 379 | esc_div += 1; |
| 380 | |
| 381 | escape_clk = byte_clk / esc_div; |
| 382 | debug("escape_clk = %lu, byte_clk = %lu, esc_div = %d\n", |
| 383 | escape_clk, byte_clk, esc_div); |
| 384 | |
| 385 | /* enable escape clock. */ |
| 386 | exynos_mipi_dsi_enable_byte_clock(dsim, 1); |
| 387 | |
| 388 | /* enable byte clk and escape clock */ |
| 389 | exynos_mipi_dsi_set_esc_clk_prs(dsim, 1, esc_div); |
| 390 | /* escape clock on lane */ |
| 391 | exynos_mipi_dsi_enable_esc_clk_on_lane(dsim, |
| 392 | (DSIM_LANE_CLOCK | dsim->data_lane), 1); |
| 393 | |
| 394 | debug("byte clock is %luMHz\n", |
| 395 | (byte_clk / MHZ)); |
| 396 | debug("escape clock that user's need is %lu\n", |
| 397 | (dsim->dsim_config->esc_clk / MHZ)); |
| 398 | debug("escape clock divider is %x\n", esc_div); |
| 399 | debug("escape clock is %luMHz\n", |
| 400 | ((byte_clk / esc_div) / MHZ)); |
| 401 | |
| 402 | if ((byte_clk / esc_div) > escape_clk) { |
| 403 | esc_clk_error_rate = escape_clk / |
| 404 | (byte_clk / esc_div); |
| 405 | debug("error rate is %lu over.\n", |
| 406 | (esc_clk_error_rate / 100)); |
| 407 | } else if ((byte_clk / esc_div) < (escape_clk)) { |
| 408 | esc_clk_error_rate = (byte_clk / esc_div) / |
| 409 | escape_clk; |
| 410 | debug("error rate is %lu under.\n", |
| 411 | (esc_clk_error_rate / 100)); |
| 412 | } |
| 413 | } else { |
| 414 | exynos_mipi_dsi_enable_esc_clk_on_lane(dsim, |
| 415 | (DSIM_LANE_CLOCK | dsim->data_lane), 0); |
| 416 | exynos_mipi_dsi_set_esc_clk_prs(dsim, 0, 0); |
| 417 | |
| 418 | /* disable escape clock. */ |
| 419 | exynos_mipi_dsi_enable_byte_clock(dsim, 0); |
| 420 | |
| 421 | if (byte_clk_sel == DSIM_PLL_OUT_DIV8) |
| 422 | exynos_mipi_dsi_pll_on(dsim, 0); |
| 423 | } |
| 424 | |
| 425 | return 0; |
| 426 | } |
| 427 | |
| 428 | int exynos_mipi_dsi_init_dsim(struct mipi_dsim_device *dsim) |
| 429 | { |
| 430 | dsim->state = DSIM_STATE_INIT; |
| 431 | |
| 432 | switch (dsim->dsim_config->e_no_data_lane) { |
| 433 | case DSIM_DATA_LANE_1: |
| 434 | dsim->data_lane = DSIM_LANE_DATA0; |
| 435 | break; |
| 436 | case DSIM_DATA_LANE_2: |
| 437 | dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1; |
| 438 | break; |
| 439 | case DSIM_DATA_LANE_3: |
| 440 | dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1 | |
| 441 | DSIM_LANE_DATA2; |
| 442 | break; |
| 443 | case DSIM_DATA_LANE_4: |
| 444 | dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1 | |
| 445 | DSIM_LANE_DATA2 | DSIM_LANE_DATA3; |
| 446 | break; |
| 447 | default: |
| 448 | debug("data lane is invalid.\n"); |
| 449 | return -EINVAL; |
| 450 | }; |
| 451 | |
| 452 | exynos_mipi_dsi_sw_reset(dsim); |
| 453 | exynos_mipi_dsi_dp_dn_swap(dsim, 0); |
| 454 | |
| 455 | return 0; |
| 456 | } |
| 457 | |
| 458 | int exynos_mipi_dsi_enable_frame_done_int(struct mipi_dsim_device *dsim, |
| 459 | unsigned int enable) |
| 460 | { |
| 461 | /* enable only frame done interrupt */ |
| 462 | exynos_mipi_dsi_set_interrupt_mask(dsim, INTMSK_FRAME_DONE, enable); |
| 463 | |
| 464 | return 0; |
| 465 | } |
| 466 | |
| 467 | static void convert_to_fb_videomode(struct fb_videomode *mode1, |
Simon Glass | 6d27559 | 2016-02-21 21:08:40 -0700 | [diff] [blame] | 468 | struct vidinfo *mode2) |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 469 | { |
| 470 | mode1->xres = mode2->vl_width; |
| 471 | mode1->yres = mode2->vl_height; |
| 472 | mode1->upper_margin = mode2->vl_vfpd; |
| 473 | mode1->lower_margin = mode2->vl_vbpd; |
| 474 | mode1->left_margin = mode2->vl_hfpd; |
| 475 | mode1->right_margin = mode2->vl_hbpd; |
| 476 | mode1->vsync_len = mode2->vl_vspw; |
| 477 | mode1->hsync_len = mode2->vl_hspw; |
| 478 | } |
| 479 | |
| 480 | int exynos_mipi_dsi_set_display_mode(struct mipi_dsim_device *dsim, |
| 481 | struct mipi_dsim_config *dsim_config) |
| 482 | { |
| 483 | struct exynos_platform_mipi_dsim *dsim_pd; |
| 484 | struct fb_videomode lcd_video; |
Simon Glass | 6d27559 | 2016-02-21 21:08:40 -0700 | [diff] [blame] | 485 | struct vidinfo *vid; |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 486 | |
| 487 | dsim_pd = (struct exynos_platform_mipi_dsim *)dsim->pd; |
Simon Glass | 6d27559 | 2016-02-21 21:08:40 -0700 | [diff] [blame] | 488 | vid = (struct vidinfo *)dsim_pd->lcd_panel_info; |
Donghwa Lee | d84f783 | 2012-04-05 19:36:21 +0000 | [diff] [blame] | 489 | |
| 490 | convert_to_fb_videomode(&lcd_video, vid); |
| 491 | |
| 492 | /* in case of VIDEO MODE (RGB INTERFACE), it sets polarities. */ |
| 493 | if (dsim->dsim_config->e_interface == (u32) DSIM_VIDEO) { |
| 494 | if (dsim->dsim_config->auto_vertical_cnt == 0) { |
| 495 | exynos_mipi_dsi_set_main_disp_vporch(dsim, |
| 496 | vid->vl_cmd_allow_len, |
| 497 | lcd_video.upper_margin, |
| 498 | lcd_video.lower_margin); |
| 499 | exynos_mipi_dsi_set_main_disp_hporch(dsim, |
| 500 | lcd_video.left_margin, |
| 501 | lcd_video.right_margin); |
| 502 | exynos_mipi_dsi_set_main_disp_sync_area(dsim, |
| 503 | lcd_video.vsync_len, |
| 504 | lcd_video.hsync_len); |
| 505 | } |
| 506 | } |
| 507 | |
| 508 | exynos_mipi_dsi_set_main_disp_resol(dsim, lcd_video.xres, |
| 509 | lcd_video.yres); |
| 510 | |
| 511 | exynos_mipi_dsi_display_config(dsim, dsim->dsim_config); |
| 512 | |
| 513 | debug("lcd panel ==> width = %d, height = %d\n", |
| 514 | lcd_video.xres, lcd_video.yres); |
| 515 | |
| 516 | return 0; |
| 517 | } |
| 518 | |
| 519 | int exynos_mipi_dsi_init_link(struct mipi_dsim_device *dsim) |
| 520 | { |
| 521 | unsigned int time_out = 100; |
| 522 | |
| 523 | switch (dsim->state) { |
| 524 | case DSIM_STATE_INIT: |
| 525 | exynos_mipi_dsi_init_fifo_pointer(dsim, 0x1f); |
| 526 | |
| 527 | /* dsi configuration */ |
| 528 | exynos_mipi_dsi_init_config(dsim); |
| 529 | exynos_mipi_dsi_enable_lane(dsim, DSIM_LANE_CLOCK, 1); |
| 530 | exynos_mipi_dsi_enable_lane(dsim, dsim->data_lane, 1); |
| 531 | |
| 532 | /* set clock configuration */ |
| 533 | exynos_mipi_dsi_set_clock(dsim, |
| 534 | dsim->dsim_config->e_byte_clk, 1); |
| 535 | |
| 536 | /* check clock and data lane state are stop state */ |
| 537 | while (!(exynos_mipi_dsi_is_lane_state(dsim))) { |
| 538 | time_out--; |
| 539 | if (time_out == 0) { |
| 540 | debug("DSI Master is not stop state.\n"); |
| 541 | debug("Check initialization process\n"); |
| 542 | |
| 543 | return -EINVAL; |
| 544 | } |
| 545 | } |
| 546 | |
| 547 | dsim->state = DSIM_STATE_STOP; |
| 548 | |
| 549 | /* BTA sequence counters */ |
| 550 | exynos_mipi_dsi_set_stop_state_counter(dsim, |
| 551 | dsim->dsim_config->stop_holding_cnt); |
| 552 | exynos_mipi_dsi_set_bta_timeout(dsim, |
| 553 | dsim->dsim_config->bta_timeout); |
| 554 | exynos_mipi_dsi_set_lpdr_timeout(dsim, |
| 555 | dsim->dsim_config->rx_timeout); |
| 556 | |
| 557 | return 0; |
| 558 | default: |
| 559 | debug("DSI Master is already init.\n"); |
| 560 | return 0; |
| 561 | } |
| 562 | |
| 563 | return 0; |
| 564 | } |
| 565 | |
| 566 | int exynos_mipi_dsi_set_hs_enable(struct mipi_dsim_device *dsim) |
| 567 | { |
| 568 | if (dsim->state == DSIM_STATE_STOP) { |
| 569 | if (dsim->e_clk_src != DSIM_EXT_CLK_BYPASS) { |
| 570 | dsim->state = DSIM_STATE_HSCLKEN; |
| 571 | |
| 572 | /* set LCDC and CPU transfer mode to HS. */ |
| 573 | exynos_mipi_dsi_set_lcdc_transfer_mode(dsim, 0); |
| 574 | exynos_mipi_dsi_set_cpu_transfer_mode(dsim, 0); |
| 575 | |
| 576 | exynos_mipi_dsi_enable_hs_clock(dsim, 1); |
| 577 | |
| 578 | return 0; |
| 579 | } else |
| 580 | debug("clock source is external bypass.\n"); |
| 581 | } else |
| 582 | debug("DSIM is not stop state.\n"); |
| 583 | |
| 584 | return 0; |
| 585 | } |
| 586 | |
| 587 | int exynos_mipi_dsi_set_data_transfer_mode(struct mipi_dsim_device *dsim, |
| 588 | unsigned int mode) |
| 589 | { |
| 590 | if (mode) { |
| 591 | if (dsim->state != DSIM_STATE_HSCLKEN) { |
| 592 | debug("HS Clock lane is not enabled.\n"); |
| 593 | return -EINVAL; |
| 594 | } |
| 595 | |
| 596 | exynos_mipi_dsi_set_lcdc_transfer_mode(dsim, 0); |
| 597 | } else { |
| 598 | if (dsim->state == DSIM_STATE_INIT || dsim->state == |
| 599 | DSIM_STATE_ULPS) { |
| 600 | debug("DSI Master is not STOP or HSDT state.\n"); |
| 601 | return -EINVAL; |
| 602 | } |
| 603 | |
| 604 | exynos_mipi_dsi_set_cpu_transfer_mode(dsim, 0); |
| 605 | } |
| 606 | |
| 607 | return 0; |
| 608 | } |
| 609 | |
| 610 | int exynos_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim) |
| 611 | { |
| 612 | return _exynos_mipi_dsi_get_frame_done_status(dsim); |
| 613 | } |
| 614 | |
| 615 | int exynos_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim) |
| 616 | { |
| 617 | _exynos_mipi_dsi_clear_frame_done(dsim); |
| 618 | |
| 619 | return 0; |
| 620 | } |