blob: 3e808613b0c4f0b09867835992e88bcdd953e9db [file] [log] [blame]
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +01001/*
2 * (C) Copyright 2015
Kamil Lulko75d48a62015-12-01 09:08:19 +01003 * Kamil Lulko, <kamil.lulko@gmail.com>
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +01004 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8#ifndef __CONFIG_H
9#define __CONFIG_H
10
11#define CONFIG_STM32F4
Albert ARIBAUD275d5092015-10-23 18:06:39 +020012#define CONFIG_SYS_THUMB_BUILD
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010013#define CONFIG_STM32F4DISCOVERY
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010014
15#define CONFIG_OF_LIBFDT
16
17#define CONFIG_BOARD_EARLY_INIT_F
Antonio Borneo989e8b22015-07-19 22:19:46 +080018#define CONFIG_MISC_INIT_R
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010019
20#define CONFIG_SYS_FLASH_BASE 0x08000000
21
22#define CONFIG_SYS_INIT_SP_ADDR 0x10010000
23#define CONFIG_SYS_TEXT_BASE 0x08000000
24
25#define CONFIG_SYS_ICACHE_OFF
26#define CONFIG_SYS_DCACHE_OFF
27
28/*
29 * Configuration of the external SDRAM memory
30 */
31#define CONFIG_NR_DRAM_BANKS 1
32#define CONFIG_SYS_RAM_SIZE (8 << 20)
33#define CONFIG_SYS_RAM_CS 1
34#define CONFIG_SYS_RAM_FREQ_DIV 2
35#define CONFIG_SYS_RAM_BASE 0xD0000000
36#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_RAM_BASE
37#define CONFIG_SYS_LOAD_ADDR 0xD0400000
38#define CONFIG_LOADADDR 0xD0400000
39
40#define CONFIG_SYS_MAX_FLASH_SECT 12
41#define CONFIG_SYS_MAX_FLASH_BANKS 2
42
43#define CONFIG_ENV_IS_IN_FLASH
44#define CONFIG_ENV_OFFSET (256 << 10)
45#define CONFIG_ENV_SECT_SIZE (128 << 10)
46#define CONFIG_ENV_SIZE (8 << 10)
47
48#define CONFIG_BOARD_SPECIFIC_LED
49#define CONFIG_RED_LED 110
50#define CONFIG_GREEN_LED 109
51
52#define CONFIG_STM32_GPIO
53#define CONFIG_STM32_SERIAL
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010054
55#define CONFIG_STM32_HSE_HZ 8000000
56
Antonio Borneof4a1a862015-07-19 22:19:48 +080057#define CONFIG_SYS_CLK_FREQ 180000000 /* 180 MHz */
58
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010059#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */
60
61#define CONFIG_CMDLINE_TAG
62#define CONFIG_SETUP_MEMORY_TAGS
63#define CONFIG_INITRD_TAG
64#define CONFIG_REVISION_TAG
65
66#define CONFIG_SYS_CBSIZE 1024
67#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
68 + sizeof(CONFIG_SYS_PROMPT) + 16)
69
70#define CONFIG_SYS_MAXARGS 16
71
72#define CONFIG_SYS_MALLOC_LEN (2 << 20)
73
74#define CONFIG_STACKSIZE (64 << 10)
75
76#define CONFIG_BAUDRATE 115200
77#define CONFIG_BOOTARGS \
rev13@wp.pl5837d222015-07-05 12:54:23 +020078 "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010079#define CONFIG_BOOTCOMMAND \
80 "run bootcmd_romfs"
81
82#define CONFIG_EXTRA_ENV_SETTINGS \
83 "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
84 "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
85 "bootm 0x08044000 - 0x08042000\0"
86
87#define CONFIG_BOOTDELAY 3
88#define CONFIG_AUTOBOOT
89
90/*
91 * Command line configuration.
92 */
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010093#define CONFIG_SYS_LONGHELP
94#define CONFIG_SYS_HUSH_PARSER
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010095#define CONFIG_AUTO_COMPLETE
96#define CONFIG_CMDLINE_EDITING
97
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010098#define CONFIG_CMD_MEM
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010099#define CONFIG_CMD_TIMER
100
101#endif /* __CONFIG_H */