| wdenk | 3c71176 | 2004-06-09 13:37:52 +0000 | [diff] [blame] | 1 | /* |
| 2 | * See file CREDITS for list of people who contributed to this |
| 3 | * project. |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or |
| 6 | * modify it under the terms of the GNU General Public License as |
| 7 | * published by the Free Software Foundation; either version 2 of |
| 8 | * the License, or (at your option) any later version. |
| 9 | * |
| 10 | * This program is distributed in the hope that it will be useful, |
| 11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 13 | * GNU General Public License for more details. |
| 14 | * |
| 15 | * You should have received a copy of the GNU General Public License |
| 16 | * along with this program; if not, write to the Free Software |
| 17 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 18 | * MA 02111-1307 USA |
| 19 | */ |
| 20 | |
| 21 | /* |
| 22 | * Logic LH7A400-10 card engine |
| 23 | */ |
| 24 | |
| 25 | #ifndef __LPD7A400_10_H |
| 26 | #define __LPD7A400_10_H |
| 27 | |
| 28 | |
| 29 | #define CONFIG_ARM920T 1 /* arm920t core */ |
| wdenk | 37bdfdf | 2004-06-10 21:55:33 +0000 | [diff] [blame] | 30 | #define CONFIG_LH7A40X 1 /* Sharp LH7A40x SoC family */ |
| 31 | #define CONFIG_LH7A400 1 /* Sharp LH7A400 S0C */ |
| wdenk | 3c71176 | 2004-06-09 13:37:52 +0000 | [diff] [blame] | 32 | |
| 33 | /* The system clock PLL input frequency */ |
| 34 | #define CONFIG_SYS_CLK_FREQ 14745600 /* System Clock PLL Input (Hz) */ |
| 35 | |
| 36 | /* ticks per second */ |
| 37 | #define CFG_HZ (508469) |
| 38 | |
| 39 | /*----------------------------------------------------------------------- |
| 40 | * Stack sizes |
| 41 | * |
| 42 | * The stack sizes are set up in start.S using the settings below |
| 43 | */ |
| 44 | #define CONFIG_STACKSIZE (128*1024) /* regular stack */ |
| 45 | #ifdef CONFIG_USE_IRQ |
| 46 | #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ |
| 47 | #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ |
| 48 | #endif |
| 49 | |
| 50 | /*----------------------------------------------------------------------- |
| 51 | * Physical Memory Map |
| 52 | */ |
| 53 | #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ |
| 54 | #define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */ |
| 55 | #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ |
| 56 | |
| 57 | #define CFG_FLASH_BASE 0x00000000 /* Flash Bank #1 */ |
| 58 | |
| 59 | /*----------------------------------------------------------------------- |
| 60 | * FLASH and environment organization |
| 61 | */ |
| 62 | #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
| 63 | #define CFG_MAX_FLASH_SECT (64) /* max number of sectors on one chip */ |
| 64 | |
| 65 | /* timeout values are in ticks */ |
| 66 | #define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */ |
| 67 | #define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */ |
| 68 | |
| 69 | /*---------------------------------------------------------------------- |
| 70 | * Using SMC91C111 LAN chip |
| 71 | * |
| 72 | * Default IO base of chip is 0x300, Card Engine has this address lines |
| 73 | * (LAN chip) tied to Vcc, so we just care about the chip select |
| 74 | */ |
| 75 | #define CONFIG_DRIVER_SMC91111 |
| 76 | #define CONFIG_SMC91111_BASE (0x70000000) |
| 77 | #undef CONFIG_SMC_USE_32_BIT |
| 78 | #define CONFIG_SMC_USE_IOFUNCS |
| 79 | |
| 80 | #endif /* __LPD7A400_10_H */ |