| Alifer Moraes | a0a2948 | 2020-03-06 07:46:33 -0300 | [diff] [blame] | 1 | U-Boot for Google's i.MX8MQ Phanbell board |
| 2 | |
| 3 | Quick Start |
| 4 | =========== |
| 5 | - Build the ARM Trusted firmware binary |
| 6 | - Get ddr and hdmi firmware |
| 7 | - Build U-Boot |
| 8 | - Boot |
| 9 | |
| 10 | Get and Build the ARM Trusted firmware |
| 11 | ====================================== |
| 12 | Note: srctree is U-Boot source directory |
| Fabio Estevam | b874c73 | 2023-01-12 21:52:23 -0300 | [diff] [blame] | 13 | Get ATF from: https://github.com/nxp-imx/imx-atf |
| Alifer Moraes | a0a2948 | 2020-03-06 07:46:33 -0300 | [diff] [blame] | 14 | branch: imx_4.19.35_1.0.0 |
| 15 | $ make PLAT=imx8mq bl31 |
| 16 | $ cp build/imx8mq/release/bl31.bin $(builddir) |
| 17 | |
| 18 | Get the ddr and hdmi firmware |
| 19 | ============================= |
| 20 | $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin |
| 21 | $ chmod +x firmware-imx-7.9.bin |
| 22 | $ ./firmware-imx-7.9.bin |
| 23 | $ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir) |
| 24 | $ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir) |
| 25 | |
| 26 | Build U-Boot |
| 27 | ============ |
| 28 | $ export CROSS_COMPILE=aarch64-linux-gnu- |
| 29 | $ make imx8mq_phanbell_defconfig |
| 30 | $ make flash.bin |
| 31 | |
| 32 | Burn the flash.bin to MicroSD card offset 33KB |
| 33 | $sudo dd if=flash.bin of=/dev/sd[x] bs=1K seek=33 |
| 34 | |
| 35 | Boot |
| 36 | ==== |
| 37 | Set Boot switch SW1: 1011 to boot from Micro SD. |