blob: 135b3c9584d37dd9c9f05dde34644e68f7164efc [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Max Krummenacher3b74ccf2016-11-30 19:43:08 +01002/*
3 * Copyright 2013-2015 Toradex, Inc.
4 *
5 * Configuration settings for the Toradex Apalis iMX6
Max Krummenacher3b74ccf2016-11-30 19:43:08 +01006 */
7
8#ifndef __CONFIG_H
9#define __CONFIG_H
10
11#include "mx6_common.h"
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010012
13#undef CONFIG_DISPLAY_BOARDINFO
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010014
15#define CONFIG_MACH_TYPE 4886
16
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010017#include <asm/arch/imx-regs.h>
Stefano Babic33731bc2017-06-29 10:16:06 +020018#include <asm/mach-imx/gpio.h>
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010019
20#ifdef CONFIG_SPL
21#include "imx6_spl.h"
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010022#endif
23
24#define CONFIG_CMDLINE_TAG
25#define CONFIG_SETUP_MEMORY_TAGS
26#define CONFIG_INITRD_TAG
27#define CONFIG_REVISION_TAG
28#define CONFIG_SERIAL_TAG
29
30/* Size of malloc() pool */
31#define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024)
32
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010033#define CONFIG_MXC_UART
34#define CONFIG_MXC_UART_BASE UART1_BASE
35
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010036/* I2C Configs */
37#define CONFIG_SYS_I2C
38#define CONFIG_SYS_I2C_MXC
39#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
40#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
41#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
42#define CONFIG_SYS_I2C_SPEED 100000
43
44/* OCOTP Configs */
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010045#ifdef CONFIG_CMD_FUSE
46#define CONFIG_MXC_OCOTP
47#endif
48
49/* MMC Configs */
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010050#define CONFIG_FSL_USDHC
51#define CONFIG_SYS_FSL_ESDHC_ADDR 0
52#define CONFIG_SYS_FSL_USDHC_NUM 3
53
54#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010055
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010056/*
57 * SATA Configs
58 */
59#ifdef CONFIG_CMD_SATA
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010060#define CONFIG_SYS_SATA_MAX_DEVICE 1
61#define CONFIG_DWC_AHSATA_PORT_ID 0
62#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
63#define CONFIG_LBA48
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010064#endif
65
66/* Network */
67#define CONFIG_FEC_MXC
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010068#define IMX_FEC_BASE ENET_BASE_ADDR
69#define CONFIG_FEC_XCV_TYPE RGMII
70#define CONFIG_ETHPRIME "FEC"
71#define CONFIG_FEC_MXC_PHYADDR 6
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010072#define CONFIG_IP_DEFRAG
73#define CONFIG_TFTP_BLOCKSIZE 4096
74#define CONFIG_TFTP_TSIZE
75
76/* USB Configs */
77/* Host */
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010078#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
79#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
80#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
81#define CONFIG_MXC_USB_FLAGS 0
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010082/* Client */
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010083#define CONFIG_USBD_HS
84
85#define CONFIG_USB_GADGET_MASS_STORAGE
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010086/* USB DFU */
87#define CONFIG_DFU_MMC
88
89/* Miscellaneous commands */
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010090
91/* Framebuffer and LCD */
92#define CONFIG_VIDEO_IPUV3
93#define CONFIG_SYS_CONSOLE_IS_IN_ENV
94#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
95#define CONFIG_VIDEO_BMP_RLE8
96#define CONFIG_SPLASH_SCREEN
97#define CONFIG_SPLASH_SCREEN_ALIGN
98#define CONFIG_BMP_16BPP
99#define CONFIG_VIDEO_LOGO
100#define CONFIG_VIDEO_BMP_LOGO
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100101#define CONFIG_CONSOLE_MUX
102#define CONFIG_IMX_HDMI
103#define CONFIG_IMX_VIDEO_SKIP
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100104
105/* allow to overwrite serial and ethaddr */
106#define CONFIG_ENV_OVERWRITE
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100107
108/* Command definition */
109#undef CONFIG_CMD_LOADB
110#undef CONFIG_CMD_LOADS
111#undef CONFIG_CMD_NFS
112#undef CONFIG_CMD_FLASH
113
114#undef CONFIG_IPADDR
115#define CONFIG_IPADDR 192.168.10.2
116#define CONFIG_NETMASK 255.255.255.0
117#undef CONFIG_SERVERIP
118#define CONFIG_SERVERIP 192.168.10.1
119
120#define CONFIG_LOADADDR 0x12000000
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100121
122#ifdef CONFIG_CMD_SATA
123#define CONFIG_DRIVE_SATA "sata "
124#else
125#define CONFIG_DRIVE_SATA
126#endif
127
128#ifdef CONFIG_CMD_MMC
129#define CONFIG_DRIVE_MMC "mmc "
130#else
131#define CONFIG_DRIVE_MMC
132#endif
133
134#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
135
136#define DFU_ALT_EMMC_INFO \
137 "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
138 "boot part 0 1;" \
139 "rootfs part 0 2;" \
140 "uImage fat 0 1;" \
141 "imx6q-colibri-eval-v3.dtb fat 0 1;" \
142 "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
143
144#define EMMC_BOOTCMD \
145 "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
146 "rootwait\0" \
147 "emmcboot=run setup; " \
148 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
149 "${vidargs}; echo Booting from internal eMMC chip...; " \
150 "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
151 "${boot_file} && run fdt_fixup && " \
152 "bootm ${kernel_addr_r} ${dtbparam}\0" \
153 "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
154 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
155
156#define MEM_LAYOUT_ENV_SETTINGS \
Stefan Agner35eebee2017-03-09 17:17:51 -0800157 "bootm_size=0x20000000\0" \
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100158 "fdt_addr_r=0x12000000\0" \
159 "fdt_high=0xffffffff\0" \
160 "initrd_high=0xffffffff\0" \
161 "kernel_addr_r=0x11000000\0" \
162 "ramdisk_addr_r=0x12100000\0"
163
164#define NFS_BOOTCMD \
165 "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
166 "nfsboot=run setup; " \
167 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
168 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
169 "run nfsdtbload; dhcp ${kernel_addr_r} " \
170 "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
171 "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
172 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
173
174#define SD_BOOTCMD \
175 "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
176 "rootwait\0" \
177 "sdboot=run setup; " \
178 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
179 "${vidargs}; echo Booting from SD card; " \
180 "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
181 "${boot_file} && run fdt_fixup && " \
182 "bootm ${kernel_addr_r} ${dtbparam}\0" \
183 "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
184 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
185
186#define USB_BOOTCMD \
187 "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
188 "rootwait\0" \
189 "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
190 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
191 "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
192 "${boot_file} && run fdt_fixup && " \
193 "bootm ${kernel_addr_r} ${dtbparam}\0" \
194 "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
195 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
196
197#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
198#define FDT_FILE "imx6q-apalis-eval.dtb"
199#define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
200#else
201#define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
202#endif
203#define CONFIG_EXTRA_ENV_SETTINGS \
204 "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
205 "run nfsboot ; echo ; echo nfsboot failed ; " \
206 "usb start ;" \
207 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
208 "boot_file=uImage\0" \
209 "console=ttymxc0\0" \
210 "defargs=enable_wait_mode=off vmalloc=400M\0" \
211 "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
212 EMMC_BOOTCMD \
213 "fdt_file=" FDT_FILE "\0" \
214 "fdt_fixup=;\0" \
215 MEM_LAYOUT_ENV_SETTINGS \
216 NFS_BOOTCMD \
217 SD_BOOTCMD \
218 "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
219 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
220 "flash_eth.img && source ${loadaddr}\0" \
221 "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
222 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
223 "source ${loadaddr}\0" \
224 "setup=setenv setupargs fec_mac=${ethaddr} " \
225 "consoleblank=0 no_console_suspend=1 console=tty1 " \
226 "console=${console},${baudrate}n8\0 " \
227 "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
228 "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
229 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
230 "source ${loadaddr}\0" \
231 "splashpos=m,m\0" \
232 "vidargs=mxc_hdmi.only_cea=1 " \
233 "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
234 "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
235 "fbmem=32M\0 "
236
237/* Miscellaneous configurable options */
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100238#undef CONFIG_SYS_CBSIZE
239#define CONFIG_SYS_CBSIZE 1024
240#undef CONFIG_SYS_MAXARGS
241#define CONFIG_SYS_MAXARGS 48
242
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100243#define CONFIG_SYS_MEMTEST_START 0x10000000
244#define CONFIG_SYS_MEMTEST_END 0x10010000
245#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
246
247#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
248
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100249/* Physical Memory Map */
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100250#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
251
252#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
253#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
254#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
255
256#define CONFIG_SYS_INIT_SP_OFFSET \
257 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
258#define CONFIG_SYS_INIT_SP_ADDR \
259 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
260
Masahiro Yamada8cea9b52017-02-11 22:43:54 +0900261/* environment organization */
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100262
263#define CONFIG_ENV_SIZE (8 * 1024)
264
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100265#if defined(CONFIG_ENV_IS_IN_MMC)
266/* Environment in eMMC, before config block at the end of 1st "boot sector" */
267#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \
268 CONFIG_TDX_CFG_BLOCK_OFFSET)
269#define CONFIG_SYS_MMC_ENV_DEV 0
270#define CONFIG_SYS_MMC_ENV_PART 1
271#endif
272
273#define CONFIG_OF_SYSTEM_SETUP
274
275#define CONFIG_CMD_TIME
276
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100277#endif /* __CONFIG_H */