Tom Rini | e33af1c | 2015-07-31 19:55:12 -0400 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify |
| 5 | * it under the terms of the GNU General Public License version 2 as |
| 6 | * published by the Free Software Foundation. |
| 7 | * Based on "omap4.dtsi" |
| 8 | */ |
| 9 | |
| 10 | #include <dt-bindings/interrupt-controller/arm-gic.h> |
| 11 | #include <dt-bindings/pinctrl/dra.h> |
| 12 | |
| 13 | #include "skeleton.dtsi" |
| 14 | |
| 15 | #define MAX_SOURCES 400 |
| 16 | |
| 17 | / { |
| 18 | #address-cells = <1>; |
| 19 | #size-cells = <1>; |
| 20 | |
| 21 | compatible = "ti,dra7xx"; |
| 22 | interrupt-parent = <&crossbar_mpu>; |
| 23 | |
| 24 | aliases { |
| 25 | i2c0 = &i2c1; |
| 26 | i2c1 = &i2c2; |
| 27 | i2c2 = &i2c3; |
| 28 | i2c3 = &i2c4; |
| 29 | i2c4 = &i2c5; |
| 30 | serial0 = &uart1; |
| 31 | serial1 = &uart2; |
| 32 | serial2 = &uart3; |
| 33 | serial3 = &uart4; |
| 34 | serial4 = &uart5; |
| 35 | serial5 = &uart6; |
| 36 | serial6 = &uart7; |
| 37 | serial7 = &uart8; |
| 38 | serial8 = &uart9; |
| 39 | serial9 = &uart10; |
| 40 | ethernet0 = &cpsw_emac0; |
| 41 | ethernet1 = &cpsw_emac1; |
| 42 | d_can0 = &dcan1; |
| 43 | d_can1 = &dcan2; |
Mugunthan V N | b1f54d8 | 2015-12-23 20:39:39 +0530 | [diff] [blame] | 44 | spi0 = &qspi; |
Tom Rini | e33af1c | 2015-07-31 19:55:12 -0400 | [diff] [blame] | 45 | }; |
| 46 | |
| 47 | timer { |
| 48 | compatible = "arm,armv7-timer"; |
| 49 | interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| 50 | <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| 51 | <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| 52 | <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; |
| 53 | interrupt-parent = <&gic>; |
| 54 | }; |
| 55 | |
| 56 | gic: interrupt-controller@48211000 { |
| 57 | compatible = "arm,cortex-a15-gic"; |
| 58 | interrupt-controller; |
| 59 | #interrupt-cells = <3>; |
| 60 | reg = <0x48211000 0x1000>, |
| 61 | <0x48212000 0x1000>, |
| 62 | <0x48214000 0x2000>, |
| 63 | <0x48216000 0x2000>; |
| 64 | interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; |
| 65 | interrupt-parent = <&gic>; |
| 66 | }; |
| 67 | |
| 68 | wakeupgen: interrupt-controller@48281000 { |
| 69 | compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; |
| 70 | interrupt-controller; |
| 71 | #interrupt-cells = <3>; |
| 72 | reg = <0x48281000 0x1000>; |
| 73 | interrupt-parent = <&gic>; |
| 74 | }; |
| 75 | |
| 76 | /* |
| 77 | * The soc node represents the soc top level view. It is used for IPs |
| 78 | * that are not memory mapped in the MPU view or for the MPU itself. |
| 79 | */ |
| 80 | soc { |
| 81 | compatible = "ti,omap-infra"; |
| 82 | mpu { |
| 83 | compatible = "ti,omap5-mpu"; |
| 84 | ti,hwmods = "mpu"; |
| 85 | }; |
| 86 | }; |
| 87 | |
| 88 | /* |
| 89 | * XXX: Use a flat representation of the SOC interconnect. |
| 90 | * The real OMAP interconnect network is quite complex. |
| 91 | * Since it will not bring real advantage to represent that in DT for |
| 92 | * the moment, just use a fake OCP bus entry to represent the whole bus |
| 93 | * hierarchy. |
| 94 | */ |
| 95 | ocp { |
| 96 | compatible = "ti,dra7-l3-noc", "simple-bus"; |
| 97 | #address-cells = <1>; |
| 98 | #size-cells = <1>; |
| 99 | ranges; |
| 100 | ti,hwmods = "l3_main_1", "l3_main_2"; |
| 101 | reg = <0x44000000 0x1000000>, |
| 102 | <0x45000000 0x1000>; |
| 103 | interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| 104 | <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 105 | |
| 106 | l4_cfg: l4@4a000000 { |
| 107 | compatible = "ti,dra7-l4-cfg", "simple-bus"; |
| 108 | #address-cells = <1>; |
| 109 | #size-cells = <1>; |
| 110 | ranges = <0 0x4a000000 0x22c000>; |
| 111 | |
| 112 | scm: scm@2000 { |
| 113 | compatible = "ti,dra7-scm-core", "simple-bus"; |
| 114 | reg = <0x2000 0x2000>; |
| 115 | #address-cells = <1>; |
| 116 | #size-cells = <1>; |
| 117 | ranges = <0 0x2000 0x2000>; |
| 118 | |
| 119 | scm_conf: scm_conf@0 { |
| 120 | compatible = "syscon"; |
| 121 | reg = <0x0 0x1400>; |
| 122 | #address-cells = <1>; |
| 123 | #size-cells = <1>; |
| 124 | |
| 125 | pbias_regulator: pbias_regulator { |
| 126 | compatible = "ti,pbias-omap"; |
| 127 | reg = <0xe00 0x4>; |
| 128 | syscon = <&scm_conf>; |
| 129 | pbias_mmc_reg: pbias_mmc_omap5 { |
| 130 | regulator-name = "pbias_mmc_omap5"; |
| 131 | regulator-min-microvolt = <1800000>; |
| 132 | regulator-max-microvolt = <3000000>; |
| 133 | }; |
| 134 | }; |
| 135 | |
| 136 | scm_conf_clocks: clocks { |
| 137 | #address-cells = <1>; |
| 138 | #size-cells = <0>; |
| 139 | }; |
| 140 | }; |
| 141 | |
| 142 | dra7_pmx_core: pinmux@1400 { |
| 143 | compatible = "ti,dra7-padconf", |
| 144 | "pinctrl-single"; |
| 145 | reg = <0x1400 0x0464>; |
| 146 | #address-cells = <1>; |
| 147 | #size-cells = <0>; |
| 148 | #interrupt-cells = <1>; |
| 149 | interrupt-controller; |
| 150 | pinctrl-single,register-width = <32>; |
| 151 | pinctrl-single,function-mask = <0x3fffffff>; |
| 152 | }; |
| 153 | }; |
| 154 | |
| 155 | cm_core_aon: cm_core_aon@5000 { |
| 156 | compatible = "ti,dra7-cm-core-aon"; |
| 157 | reg = <0x5000 0x2000>; |
| 158 | |
| 159 | cm_core_aon_clocks: clocks { |
| 160 | #address-cells = <1>; |
| 161 | #size-cells = <0>; |
| 162 | }; |
| 163 | |
| 164 | cm_core_aon_clockdomains: clockdomains { |
| 165 | }; |
| 166 | }; |
| 167 | |
| 168 | cm_core: cm_core@8000 { |
| 169 | compatible = "ti,dra7-cm-core"; |
| 170 | reg = <0x8000 0x3000>; |
| 171 | |
| 172 | cm_core_clocks: clocks { |
| 173 | #address-cells = <1>; |
| 174 | #size-cells = <0>; |
| 175 | }; |
| 176 | |
| 177 | cm_core_clockdomains: clockdomains { |
| 178 | }; |
| 179 | }; |
| 180 | }; |
| 181 | |
| 182 | l4_wkup: l4@4ae00000 { |
| 183 | compatible = "ti,dra7-l4-wkup", "simple-bus"; |
| 184 | #address-cells = <1>; |
| 185 | #size-cells = <1>; |
| 186 | ranges = <0 0x4ae00000 0x3f000>; |
| 187 | |
| 188 | counter32k: counter@4000 { |
| 189 | compatible = "ti,omap-counter32k"; |
| 190 | reg = <0x4000 0x40>; |
| 191 | ti,hwmods = "counter_32k"; |
| 192 | }; |
| 193 | |
| 194 | prm: prm@6000 { |
| 195 | compatible = "ti,dra7-prm"; |
| 196 | reg = <0x6000 0x3000>; |
| 197 | interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| 198 | |
| 199 | prm_clocks: clocks { |
| 200 | #address-cells = <1>; |
| 201 | #size-cells = <0>; |
| 202 | }; |
| 203 | |
| 204 | prm_clockdomains: clockdomains { |
| 205 | }; |
| 206 | }; |
| 207 | }; |
| 208 | |
| 209 | axi@0 { |
| 210 | compatible = "simple-bus"; |
| 211 | #size-cells = <1>; |
| 212 | #address-cells = <1>; |
| 213 | ranges = <0x51000000 0x51000000 0x3000 |
| 214 | 0x0 0x20000000 0x10000000>; |
| 215 | pcie@51000000 { |
| 216 | compatible = "ti,dra7-pcie"; |
| 217 | reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>; |
| 218 | reg-names = "rc_dbics", "ti_conf", "config"; |
| 219 | interrupts = <0 232 0x4>, <0 233 0x4>; |
| 220 | #address-cells = <3>; |
| 221 | #size-cells = <2>; |
| 222 | device_type = "pci"; |
| 223 | ranges = <0x81000000 0 0 0x03000 0 0x00010000 |
| 224 | 0x82000000 0 0x20013000 0x13000 0 0xffed000>; |
| 225 | #interrupt-cells = <1>; |
| 226 | num-lanes = <1>; |
| 227 | ti,hwmods = "pcie1"; |
| 228 | phys = <&pcie1_phy>; |
| 229 | phy-names = "pcie-phy0"; |
| 230 | interrupt-map-mask = <0 0 0 7>; |
| 231 | interrupt-map = <0 0 0 1 &pcie1_intc 1>, |
| 232 | <0 0 0 2 &pcie1_intc 2>, |
| 233 | <0 0 0 3 &pcie1_intc 3>, |
| 234 | <0 0 0 4 &pcie1_intc 4>; |
| 235 | pcie1_intc: interrupt-controller { |
| 236 | interrupt-controller; |
| 237 | #address-cells = <0>; |
| 238 | #interrupt-cells = <1>; |
| 239 | }; |
| 240 | }; |
| 241 | }; |
| 242 | |
| 243 | axi@1 { |
| 244 | compatible = "simple-bus"; |
| 245 | #size-cells = <1>; |
| 246 | #address-cells = <1>; |
| 247 | ranges = <0x51800000 0x51800000 0x3000 |
| 248 | 0x0 0x30000000 0x10000000>; |
| 249 | status = "disabled"; |
| 250 | pcie@51000000 { |
| 251 | compatible = "ti,dra7-pcie"; |
| 252 | reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>; |
| 253 | reg-names = "rc_dbics", "ti_conf", "config"; |
| 254 | interrupts = <0 355 0x4>, <0 356 0x4>; |
| 255 | #address-cells = <3>; |
| 256 | #size-cells = <2>; |
| 257 | device_type = "pci"; |
| 258 | ranges = <0x81000000 0 0 0x03000 0 0x00010000 |
| 259 | 0x82000000 0 0x30013000 0x13000 0 0xffed000>; |
| 260 | #interrupt-cells = <1>; |
| 261 | num-lanes = <1>; |
| 262 | ti,hwmods = "pcie2"; |
| 263 | phys = <&pcie2_phy>; |
| 264 | phy-names = "pcie-phy0"; |
| 265 | interrupt-map-mask = <0 0 0 7>; |
| 266 | interrupt-map = <0 0 0 1 &pcie2_intc 1>, |
| 267 | <0 0 0 2 &pcie2_intc 2>, |
| 268 | <0 0 0 3 &pcie2_intc 3>, |
| 269 | <0 0 0 4 &pcie2_intc 4>; |
| 270 | pcie2_intc: interrupt-controller { |
| 271 | interrupt-controller; |
| 272 | #address-cells = <0>; |
| 273 | #interrupt-cells = <1>; |
| 274 | }; |
| 275 | }; |
| 276 | }; |
| 277 | |
| 278 | bandgap: bandgap@4a0021e0 { |
| 279 | reg = <0x4a0021e0 0xc |
| 280 | 0x4a00232c 0xc |
| 281 | 0x4a002380 0x2c |
| 282 | 0x4a0023C0 0x3c |
| 283 | 0x4a002564 0x8 |
| 284 | 0x4a002574 0x50>; |
| 285 | compatible = "ti,dra752-bandgap"; |
| 286 | interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; |
| 287 | #thermal-sensor-cells = <1>; |
| 288 | }; |
| 289 | |
| 290 | dra7_ctrl_core: ctrl_core@4a002000 { |
| 291 | compatible = "syscon"; |
| 292 | reg = <0x4a002000 0x6d0>; |
| 293 | }; |
| 294 | |
| 295 | dra7_ctrl_general: tisyscon@4a002e00 { |
| 296 | compatible = "syscon"; |
| 297 | reg = <0x4a002e00 0x7c>; |
| 298 | }; |
| 299 | |
| 300 | sdma: dma-controller@4a056000 { |
| 301 | compatible = "ti,omap4430-sdma"; |
| 302 | reg = <0x4a056000 0x1000>; |
| 303 | interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, |
| 304 | <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 305 | <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| 306 | <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 307 | #dma-cells = <1>; |
| 308 | dma-channels = <32>; |
| 309 | dma-requests = <127>; |
| 310 | }; |
| 311 | |
| 312 | gpio1: gpio@4ae10000 { |
| 313 | compatible = "ti,omap4-gpio"; |
| 314 | reg = <0x4ae10000 0x200>; |
| 315 | interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| 316 | ti,hwmods = "gpio1"; |
| 317 | gpio-controller; |
| 318 | #gpio-cells = <2>; |
| 319 | interrupt-controller; |
| 320 | #interrupt-cells = <2>; |
| 321 | }; |
| 322 | |
| 323 | gpio2: gpio@48055000 { |
| 324 | compatible = "ti,omap4-gpio"; |
| 325 | reg = <0x48055000 0x200>; |
| 326 | interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| 327 | ti,hwmods = "gpio2"; |
| 328 | gpio-controller; |
| 329 | #gpio-cells = <2>; |
| 330 | interrupt-controller; |
| 331 | #interrupt-cells = <2>; |
| 332 | }; |
| 333 | |
| 334 | gpio3: gpio@48057000 { |
| 335 | compatible = "ti,omap4-gpio"; |
| 336 | reg = <0x48057000 0x200>; |
| 337 | interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| 338 | ti,hwmods = "gpio3"; |
| 339 | gpio-controller; |
| 340 | #gpio-cells = <2>; |
| 341 | interrupt-controller; |
| 342 | #interrupt-cells = <2>; |
| 343 | }; |
| 344 | |
| 345 | gpio4: gpio@48059000 { |
| 346 | compatible = "ti,omap4-gpio"; |
| 347 | reg = <0x48059000 0x200>; |
| 348 | interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| 349 | ti,hwmods = "gpio4"; |
| 350 | gpio-controller; |
| 351 | #gpio-cells = <2>; |
| 352 | interrupt-controller; |
| 353 | #interrupt-cells = <2>; |
| 354 | }; |
| 355 | |
| 356 | gpio5: gpio@4805b000 { |
| 357 | compatible = "ti,omap4-gpio"; |
| 358 | reg = <0x4805b000 0x200>; |
| 359 | interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| 360 | ti,hwmods = "gpio5"; |
| 361 | gpio-controller; |
| 362 | #gpio-cells = <2>; |
| 363 | interrupt-controller; |
| 364 | #interrupt-cells = <2>; |
| 365 | }; |
| 366 | |
| 367 | gpio6: gpio@4805d000 { |
| 368 | compatible = "ti,omap4-gpio"; |
| 369 | reg = <0x4805d000 0x200>; |
| 370 | interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| 371 | ti,hwmods = "gpio6"; |
| 372 | gpio-controller; |
| 373 | #gpio-cells = <2>; |
| 374 | interrupt-controller; |
| 375 | #interrupt-cells = <2>; |
| 376 | }; |
| 377 | |
| 378 | gpio7: gpio@48051000 { |
| 379 | compatible = "ti,omap4-gpio"; |
| 380 | reg = <0x48051000 0x200>; |
| 381 | interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| 382 | ti,hwmods = "gpio7"; |
| 383 | gpio-controller; |
| 384 | #gpio-cells = <2>; |
| 385 | interrupt-controller; |
| 386 | #interrupt-cells = <2>; |
| 387 | }; |
| 388 | |
| 389 | gpio8: gpio@48053000 { |
| 390 | compatible = "ti,omap4-gpio"; |
| 391 | reg = <0x48053000 0x200>; |
| 392 | interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; |
| 393 | ti,hwmods = "gpio8"; |
| 394 | gpio-controller; |
| 395 | #gpio-cells = <2>; |
| 396 | interrupt-controller; |
| 397 | #interrupt-cells = <2>; |
| 398 | }; |
| 399 | |
| 400 | uart1: serial@4806a000 { |
| 401 | compatible = "ti,omap4-uart"; |
| 402 | reg = <0x4806a000 0x100>; |
Mugunthan V N | 65634e8 | 2015-11-26 14:49:10 +0530 | [diff] [blame] | 403 | reg-shift = <2>; |
Tom Rini | e33af1c | 2015-07-31 19:55:12 -0400 | [diff] [blame] | 404 | interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| 405 | ti,hwmods = "uart1"; |
| 406 | clock-frequency = <48000000>; |
| 407 | status = "disabled"; |
| 408 | dmas = <&sdma 49>, <&sdma 50>; |
| 409 | dma-names = "tx", "rx"; |
| 410 | }; |
| 411 | |
| 412 | uart2: serial@4806c000 { |
| 413 | compatible = "ti,omap4-uart"; |
| 414 | reg = <0x4806c000 0x100>; |
Mugunthan V N | 65634e8 | 2015-11-26 14:49:10 +0530 | [diff] [blame] | 415 | reg-shift = <2>; |
Tom Rini | e33af1c | 2015-07-31 19:55:12 -0400 | [diff] [blame] | 416 | interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| 417 | ti,hwmods = "uart2"; |
| 418 | clock-frequency = <48000000>; |
| 419 | status = "disabled"; |
| 420 | dmas = <&sdma 51>, <&sdma 52>; |
| 421 | dma-names = "tx", "rx"; |
| 422 | }; |
| 423 | |
| 424 | uart3: serial@48020000 { |
| 425 | compatible = "ti,omap4-uart"; |
| 426 | reg = <0x48020000 0x100>; |
Mugunthan V N | 65634e8 | 2015-11-26 14:49:10 +0530 | [diff] [blame] | 427 | reg-shift = <2>; |
Tom Rini | e33af1c | 2015-07-31 19:55:12 -0400 | [diff] [blame] | 428 | interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| 429 | ti,hwmods = "uart3"; |
| 430 | clock-frequency = <48000000>; |
| 431 | status = "disabled"; |
| 432 | dmas = <&sdma 53>, <&sdma 54>; |
| 433 | dma-names = "tx", "rx"; |
| 434 | }; |
| 435 | |
| 436 | uart4: serial@4806e000 { |
| 437 | compatible = "ti,omap4-uart"; |
| 438 | reg = <0x4806e000 0x100>; |
Mugunthan V N | 65634e8 | 2015-11-26 14:49:10 +0530 | [diff] [blame] | 439 | reg-shift = <2>; |
Tom Rini | e33af1c | 2015-07-31 19:55:12 -0400 | [diff] [blame] | 440 | interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| 441 | ti,hwmods = "uart4"; |
| 442 | clock-frequency = <48000000>; |
| 443 | status = "disabled"; |
| 444 | dmas = <&sdma 55>, <&sdma 56>; |
| 445 | dma-names = "tx", "rx"; |
| 446 | }; |
| 447 | |
| 448 | uart5: serial@48066000 { |
| 449 | compatible = "ti,omap4-uart"; |
| 450 | reg = <0x48066000 0x100>; |
Mugunthan V N | 65634e8 | 2015-11-26 14:49:10 +0530 | [diff] [blame] | 451 | reg-shift = <2>; |
Tom Rini | e33af1c | 2015-07-31 19:55:12 -0400 | [diff] [blame] | 452 | interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| 453 | ti,hwmods = "uart5"; |
| 454 | clock-frequency = <48000000>; |
| 455 | status = "disabled"; |
| 456 | dmas = <&sdma 63>, <&sdma 64>; |
| 457 | dma-names = "tx", "rx"; |
| 458 | }; |
| 459 | |
| 460 | uart6: serial@48068000 { |
| 461 | compatible = "ti,omap4-uart"; |
| 462 | reg = <0x48068000 0x100>; |
Mugunthan V N | 65634e8 | 2015-11-26 14:49:10 +0530 | [diff] [blame] | 463 | reg-shift = <2>; |
Tom Rini | e33af1c | 2015-07-31 19:55:12 -0400 | [diff] [blame] | 464 | interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| 465 | ti,hwmods = "uart6"; |
| 466 | clock-frequency = <48000000>; |
| 467 | status = "disabled"; |
| 468 | dmas = <&sdma 79>, <&sdma 80>; |
| 469 | dma-names = "tx", "rx"; |
| 470 | }; |
| 471 | |
| 472 | uart7: serial@48420000 { |
| 473 | compatible = "ti,omap4-uart"; |
| 474 | reg = <0x48420000 0x100>; |
Mugunthan V N | 65634e8 | 2015-11-26 14:49:10 +0530 | [diff] [blame] | 475 | reg-shift = <2>; |
Tom Rini | e33af1c | 2015-07-31 19:55:12 -0400 | [diff] [blame] | 476 | interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; |
| 477 | ti,hwmods = "uart7"; |
| 478 | clock-frequency = <48000000>; |
| 479 | status = "disabled"; |
| 480 | }; |
| 481 | |
| 482 | uart8: serial@48422000 { |
| 483 | compatible = "ti,omap4-uart"; |
| 484 | reg = <0x48422000 0x100>; |
Mugunthan V N | 65634e8 | 2015-11-26 14:49:10 +0530 | [diff] [blame] | 485 | reg-shift = <2>; |
Tom Rini | e33af1c | 2015-07-31 19:55:12 -0400 | [diff] [blame] | 486 | interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; |
| 487 | ti,hwmods = "uart8"; |
| 488 | clock-frequency = <48000000>; |
| 489 | status = "disabled"; |
| 490 | }; |
| 491 | |
| 492 | uart9: serial@48424000 { |
| 493 | compatible = "ti,omap4-uart"; |
| 494 | reg = <0x48424000 0x100>; |
Mugunthan V N | 65634e8 | 2015-11-26 14:49:10 +0530 | [diff] [blame] | 495 | reg-shift = <2>; |
Tom Rini | e33af1c | 2015-07-31 19:55:12 -0400 | [diff] [blame] | 496 | interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; |
| 497 | ti,hwmods = "uart9"; |
| 498 | clock-frequency = <48000000>; |
| 499 | status = "disabled"; |
| 500 | }; |
| 501 | |
| 502 | uart10: serial@4ae2b000 { |
| 503 | compatible = "ti,omap4-uart"; |
| 504 | reg = <0x4ae2b000 0x100>; |
Mugunthan V N | 65634e8 | 2015-11-26 14:49:10 +0530 | [diff] [blame] | 505 | reg-shift = <2>; |
Tom Rini | e33af1c | 2015-07-31 19:55:12 -0400 | [diff] [blame] | 506 | interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; |
| 507 | ti,hwmods = "uart10"; |
| 508 | clock-frequency = <48000000>; |
| 509 | status = "disabled"; |
| 510 | }; |
| 511 | |
| 512 | mailbox1: mailbox@4a0f4000 { |
| 513 | compatible = "ti,omap4-mailbox"; |
| 514 | reg = <0x4a0f4000 0x200>; |
| 515 | interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, |
| 516 | <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, |
| 517 | <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; |
| 518 | ti,hwmods = "mailbox1"; |
| 519 | #mbox-cells = <1>; |
| 520 | ti,mbox-num-users = <3>; |
| 521 | ti,mbox-num-fifos = <8>; |
| 522 | status = "disabled"; |
| 523 | }; |
| 524 | |
| 525 | mailbox2: mailbox@4883a000 { |
| 526 | compatible = "ti,omap4-mailbox"; |
| 527 | reg = <0x4883a000 0x200>; |
| 528 | interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>, |
| 529 | <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, |
| 530 | <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>, |
| 531 | <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; |
| 532 | ti,hwmods = "mailbox2"; |
| 533 | #mbox-cells = <1>; |
| 534 | ti,mbox-num-users = <4>; |
| 535 | ti,mbox-num-fifos = <12>; |
| 536 | status = "disabled"; |
| 537 | }; |
| 538 | |
| 539 | mailbox3: mailbox@4883c000 { |
| 540 | compatible = "ti,omap4-mailbox"; |
| 541 | reg = <0x4883c000 0x200>; |
| 542 | interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, |
| 543 | <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, |
| 544 | <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, |
| 545 | <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; |
| 546 | ti,hwmods = "mailbox3"; |
| 547 | #mbox-cells = <1>; |
| 548 | ti,mbox-num-users = <4>; |
| 549 | ti,mbox-num-fifos = <12>; |
| 550 | status = "disabled"; |
| 551 | }; |
| 552 | |
| 553 | mailbox4: mailbox@4883e000 { |
| 554 | compatible = "ti,omap4-mailbox"; |
| 555 | reg = <0x4883e000 0x200>; |
| 556 | interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, |
| 557 | <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, |
| 558 | <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, |
| 559 | <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; |
| 560 | ti,hwmods = "mailbox4"; |
| 561 | #mbox-cells = <1>; |
| 562 | ti,mbox-num-users = <4>; |
| 563 | ti,mbox-num-fifos = <12>; |
| 564 | status = "disabled"; |
| 565 | }; |
| 566 | |
| 567 | mailbox5: mailbox@48840000 { |
| 568 | compatible = "ti,omap4-mailbox"; |
| 569 | reg = <0x48840000 0x200>; |
| 570 | interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, |
| 571 | <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, |
| 572 | <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, |
| 573 | <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; |
| 574 | ti,hwmods = "mailbox5"; |
| 575 | #mbox-cells = <1>; |
| 576 | ti,mbox-num-users = <4>; |
| 577 | ti,mbox-num-fifos = <12>; |
| 578 | status = "disabled"; |
| 579 | }; |
| 580 | |
| 581 | mailbox6: mailbox@48842000 { |
| 582 | compatible = "ti,omap4-mailbox"; |
| 583 | reg = <0x48842000 0x200>; |
| 584 | interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, |
| 585 | <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, |
| 586 | <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, |
| 587 | <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; |
| 588 | ti,hwmods = "mailbox6"; |
| 589 | #mbox-cells = <1>; |
| 590 | ti,mbox-num-users = <4>; |
| 591 | ti,mbox-num-fifos = <12>; |
| 592 | status = "disabled"; |
| 593 | }; |
| 594 | |
| 595 | mailbox7: mailbox@48844000 { |
| 596 | compatible = "ti,omap4-mailbox"; |
| 597 | reg = <0x48844000 0x200>; |
| 598 | interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, |
| 599 | <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, |
| 600 | <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, |
| 601 | <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>; |
| 602 | ti,hwmods = "mailbox7"; |
| 603 | #mbox-cells = <1>; |
| 604 | ti,mbox-num-users = <4>; |
| 605 | ti,mbox-num-fifos = <12>; |
| 606 | status = "disabled"; |
| 607 | }; |
| 608 | |
| 609 | mailbox8: mailbox@48846000 { |
| 610 | compatible = "ti,omap4-mailbox"; |
| 611 | reg = <0x48846000 0x200>; |
| 612 | interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, |
| 613 | <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, |
| 614 | <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, |
| 615 | <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; |
| 616 | ti,hwmods = "mailbox8"; |
| 617 | #mbox-cells = <1>; |
| 618 | ti,mbox-num-users = <4>; |
| 619 | ti,mbox-num-fifos = <12>; |
| 620 | status = "disabled"; |
| 621 | }; |
| 622 | |
| 623 | mailbox9: mailbox@4885e000 { |
| 624 | compatible = "ti,omap4-mailbox"; |
| 625 | reg = <0x4885e000 0x200>; |
| 626 | interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, |
| 627 | <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, |
| 628 | <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, |
| 629 | <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; |
| 630 | ti,hwmods = "mailbox9"; |
| 631 | #mbox-cells = <1>; |
| 632 | ti,mbox-num-users = <4>; |
| 633 | ti,mbox-num-fifos = <12>; |
| 634 | status = "disabled"; |
| 635 | }; |
| 636 | |
| 637 | mailbox10: mailbox@48860000 { |
| 638 | compatible = "ti,omap4-mailbox"; |
| 639 | reg = <0x48860000 0x200>; |
| 640 | interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, |
| 641 | <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, |
| 642 | <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, |
| 643 | <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; |
| 644 | ti,hwmods = "mailbox10"; |
| 645 | #mbox-cells = <1>; |
| 646 | ti,mbox-num-users = <4>; |
| 647 | ti,mbox-num-fifos = <12>; |
| 648 | status = "disabled"; |
| 649 | }; |
| 650 | |
| 651 | mailbox11: mailbox@48862000 { |
| 652 | compatible = "ti,omap4-mailbox"; |
| 653 | reg = <0x48862000 0x200>; |
| 654 | interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, |
| 655 | <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, |
| 656 | <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, |
| 657 | <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>; |
| 658 | ti,hwmods = "mailbox11"; |
| 659 | #mbox-cells = <1>; |
| 660 | ti,mbox-num-users = <4>; |
| 661 | ti,mbox-num-fifos = <12>; |
| 662 | status = "disabled"; |
| 663 | }; |
| 664 | |
| 665 | mailbox12: mailbox@48864000 { |
| 666 | compatible = "ti,omap4-mailbox"; |
| 667 | reg = <0x48864000 0x200>; |
| 668 | interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, |
| 669 | <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, |
| 670 | <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, |
| 671 | <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>; |
| 672 | ti,hwmods = "mailbox12"; |
| 673 | #mbox-cells = <1>; |
| 674 | ti,mbox-num-users = <4>; |
| 675 | ti,mbox-num-fifos = <12>; |
| 676 | status = "disabled"; |
| 677 | }; |
| 678 | |
| 679 | mailbox13: mailbox@48802000 { |
| 680 | compatible = "ti,omap4-mailbox"; |
| 681 | reg = <0x48802000 0x200>; |
| 682 | interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, |
| 683 | <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>, |
| 684 | <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, |
| 685 | <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>; |
| 686 | ti,hwmods = "mailbox13"; |
| 687 | #mbox-cells = <1>; |
| 688 | ti,mbox-num-users = <4>; |
| 689 | ti,mbox-num-fifos = <12>; |
| 690 | status = "disabled"; |
| 691 | }; |
| 692 | |
| 693 | timer1: timer@4ae18000 { |
| 694 | compatible = "ti,omap5430-timer"; |
| 695 | reg = <0x4ae18000 0x80>; |
| 696 | interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 697 | ti,hwmods = "timer1"; |
| 698 | ti,timer-alwon; |
| 699 | }; |
| 700 | |
| 701 | timer2: timer@48032000 { |
| 702 | compatible = "ti,omap5430-timer"; |
| 703 | reg = <0x48032000 0x80>; |
| 704 | interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 705 | ti,hwmods = "timer2"; |
| 706 | }; |
| 707 | |
| 708 | timer3: timer@48034000 { |
| 709 | compatible = "ti,omap5430-timer"; |
| 710 | reg = <0x48034000 0x80>; |
| 711 | interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| 712 | ti,hwmods = "timer3"; |
| 713 | }; |
| 714 | |
| 715 | timer4: timer@48036000 { |
| 716 | compatible = "ti,omap5430-timer"; |
| 717 | reg = <0x48036000 0x80>; |
| 718 | interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 719 | ti,hwmods = "timer4"; |
| 720 | }; |
| 721 | |
| 722 | timer5: timer@48820000 { |
| 723 | compatible = "ti,omap5430-timer"; |
| 724 | reg = <0x48820000 0x80>; |
| 725 | interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| 726 | ti,hwmods = "timer5"; |
| 727 | }; |
| 728 | |
| 729 | timer6: timer@48822000 { |
| 730 | compatible = "ti,omap5430-timer"; |
| 731 | reg = <0x48822000 0x80>; |
| 732 | interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 733 | ti,hwmods = "timer6"; |
| 734 | }; |
| 735 | |
| 736 | timer7: timer@48824000 { |
| 737 | compatible = "ti,omap5430-timer"; |
| 738 | reg = <0x48824000 0x80>; |
| 739 | interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| 740 | ti,hwmods = "timer7"; |
| 741 | }; |
| 742 | |
| 743 | timer8: timer@48826000 { |
| 744 | compatible = "ti,omap5430-timer"; |
| 745 | reg = <0x48826000 0x80>; |
| 746 | interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| 747 | ti,hwmods = "timer8"; |
| 748 | }; |
| 749 | |
| 750 | timer9: timer@4803e000 { |
| 751 | compatible = "ti,omap5430-timer"; |
| 752 | reg = <0x4803e000 0x80>; |
| 753 | interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| 754 | ti,hwmods = "timer9"; |
| 755 | }; |
| 756 | |
| 757 | timer10: timer@48086000 { |
| 758 | compatible = "ti,omap5430-timer"; |
| 759 | reg = <0x48086000 0x80>; |
| 760 | interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| 761 | ti,hwmods = "timer10"; |
| 762 | }; |
| 763 | |
| 764 | timer11: timer@48088000 { |
| 765 | compatible = "ti,omap5430-timer"; |
| 766 | reg = <0x48088000 0x80>; |
| 767 | interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| 768 | ti,hwmods = "timer11"; |
| 769 | }; |
| 770 | |
| 771 | timer13: timer@48828000 { |
| 772 | compatible = "ti,omap5430-timer"; |
| 773 | reg = <0x48828000 0x80>; |
| 774 | interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; |
| 775 | ti,hwmods = "timer13"; |
| 776 | status = "disabled"; |
| 777 | }; |
| 778 | |
| 779 | timer14: timer@4882a000 { |
| 780 | compatible = "ti,omap5430-timer"; |
| 781 | reg = <0x4882a000 0x80>; |
| 782 | interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; |
| 783 | ti,hwmods = "timer14"; |
| 784 | status = "disabled"; |
| 785 | }; |
| 786 | |
| 787 | timer15: timer@4882c000 { |
| 788 | compatible = "ti,omap5430-timer"; |
| 789 | reg = <0x4882c000 0x80>; |
| 790 | interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; |
| 791 | ti,hwmods = "timer15"; |
| 792 | status = "disabled"; |
| 793 | }; |
| 794 | |
| 795 | timer16: timer@4882e000 { |
| 796 | compatible = "ti,omap5430-timer"; |
| 797 | reg = <0x4882e000 0x80>; |
| 798 | interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; |
| 799 | ti,hwmods = "timer16"; |
| 800 | status = "disabled"; |
| 801 | }; |
| 802 | |
| 803 | wdt2: wdt@4ae14000 { |
| 804 | compatible = "ti,omap3-wdt"; |
| 805 | reg = <0x4ae14000 0x80>; |
| 806 | interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| 807 | ti,hwmods = "wd_timer2"; |
| 808 | }; |
| 809 | |
| 810 | hwspinlock: spinlock@4a0f6000 { |
| 811 | compatible = "ti,omap4-hwspinlock"; |
| 812 | reg = <0x4a0f6000 0x1000>; |
| 813 | ti,hwmods = "spinlock"; |
| 814 | #hwlock-cells = <1>; |
| 815 | }; |
| 816 | |
| 817 | dmm@4e000000 { |
| 818 | compatible = "ti,omap5-dmm"; |
| 819 | reg = <0x4e000000 0x800>; |
| 820 | interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| 821 | ti,hwmods = "dmm"; |
| 822 | }; |
| 823 | |
| 824 | i2c1: i2c@48070000 { |
| 825 | compatible = "ti,omap4-i2c"; |
| 826 | reg = <0x48070000 0x100>; |
| 827 | interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; |
| 828 | #address-cells = <1>; |
| 829 | #size-cells = <0>; |
| 830 | ti,hwmods = "i2c1"; |
| 831 | status = "disabled"; |
| 832 | }; |
| 833 | |
| 834 | i2c2: i2c@48072000 { |
| 835 | compatible = "ti,omap4-i2c"; |
| 836 | reg = <0x48072000 0x100>; |
| 837 | interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| 838 | #address-cells = <1>; |
| 839 | #size-cells = <0>; |
| 840 | ti,hwmods = "i2c2"; |
| 841 | status = "disabled"; |
| 842 | }; |
| 843 | |
| 844 | i2c3: i2c@48060000 { |
| 845 | compatible = "ti,omap4-i2c"; |
| 846 | reg = <0x48060000 0x100>; |
| 847 | interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
| 848 | #address-cells = <1>; |
| 849 | #size-cells = <0>; |
| 850 | ti,hwmods = "i2c3"; |
| 851 | status = "disabled"; |
| 852 | }; |
| 853 | |
| 854 | i2c4: i2c@4807a000 { |
| 855 | compatible = "ti,omap4-i2c"; |
| 856 | reg = <0x4807a000 0x100>; |
| 857 | interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; |
| 858 | #address-cells = <1>; |
| 859 | #size-cells = <0>; |
| 860 | ti,hwmods = "i2c4"; |
| 861 | status = "disabled"; |
| 862 | }; |
| 863 | |
| 864 | i2c5: i2c@4807c000 { |
| 865 | compatible = "ti,omap4-i2c"; |
| 866 | reg = <0x4807c000 0x100>; |
| 867 | interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| 868 | #address-cells = <1>; |
| 869 | #size-cells = <0>; |
| 870 | ti,hwmods = "i2c5"; |
| 871 | status = "disabled"; |
| 872 | }; |
| 873 | |
| 874 | mmc1: mmc@4809c000 { |
| 875 | compatible = "ti,omap4-hsmmc"; |
| 876 | reg = <0x4809c000 0x400>; |
| 877 | interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| 878 | ti,hwmods = "mmc1"; |
| 879 | ti,dual-volt; |
| 880 | ti,needs-special-reset; |
| 881 | dmas = <&sdma 61>, <&sdma 62>; |
| 882 | dma-names = "tx", "rx"; |
| 883 | status = "disabled"; |
| 884 | pbias-supply = <&pbias_mmc_reg>; |
| 885 | }; |
| 886 | |
| 887 | mmc2: mmc@480b4000 { |
| 888 | compatible = "ti,omap4-hsmmc"; |
| 889 | reg = <0x480b4000 0x400>; |
| 890 | interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| 891 | ti,hwmods = "mmc2"; |
| 892 | ti,needs-special-reset; |
| 893 | dmas = <&sdma 47>, <&sdma 48>; |
| 894 | dma-names = "tx", "rx"; |
| 895 | status = "disabled"; |
| 896 | }; |
| 897 | |
| 898 | mmc3: mmc@480ad000 { |
| 899 | compatible = "ti,omap4-hsmmc"; |
| 900 | reg = <0x480ad000 0x400>; |
| 901 | interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| 902 | ti,hwmods = "mmc3"; |
| 903 | ti,needs-special-reset; |
| 904 | dmas = <&sdma 77>, <&sdma 78>; |
| 905 | dma-names = "tx", "rx"; |
| 906 | status = "disabled"; |
| 907 | }; |
| 908 | |
| 909 | mmc4: mmc@480d1000 { |
| 910 | compatible = "ti,omap4-hsmmc"; |
| 911 | reg = <0x480d1000 0x400>; |
| 912 | interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| 913 | ti,hwmods = "mmc4"; |
| 914 | ti,needs-special-reset; |
| 915 | dmas = <&sdma 57>, <&sdma 58>; |
| 916 | dma-names = "tx", "rx"; |
| 917 | status = "disabled"; |
| 918 | }; |
| 919 | |
| 920 | abb_mpu: regulator-abb-mpu { |
| 921 | compatible = "ti,abb-v3"; |
| 922 | regulator-name = "abb_mpu"; |
| 923 | #address-cells = <0>; |
| 924 | #size-cells = <0>; |
| 925 | clocks = <&sys_clkin1>; |
| 926 | ti,settling-time = <50>; |
| 927 | ti,clock-cycles = <16>; |
| 928 | |
| 929 | reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>, |
| 930 | <0x4ae06014 0x4>, <0x4a003b20 0xc>, |
| 931 | <0x4ae0c158 0x4>; |
| 932 | reg-names = "setup-address", "control-address", |
| 933 | "int-address", "efuse-address", |
| 934 | "ldo-address"; |
| 935 | ti,tranxdone-status-mask = <0x80>; |
| 936 | /* LDOVBBMPU_FBB_MUX_CTRL */ |
| 937 | ti,ldovbb-override-mask = <0x400>; |
| 938 | /* LDOVBBMPU_FBB_VSET_OUT */ |
| 939 | ti,ldovbb-vset-mask = <0x1F>; |
| 940 | |
| 941 | /* |
| 942 | * NOTE: only FBB mode used but actual vset will |
| 943 | * determine final biasing |
| 944 | */ |
| 945 | ti,abb_info = < |
| 946 | /*uV ABB efuse rbb_m fbb_m vset_m*/ |
| 947 | 1060000 0 0x0 0 0x02000000 0x01F00000 |
| 948 | 1160000 0 0x4 0 0x02000000 0x01F00000 |
| 949 | 1210000 0 0x8 0 0x02000000 0x01F00000 |
| 950 | >; |
| 951 | }; |
| 952 | |
| 953 | abb_ivahd: regulator-abb-ivahd { |
| 954 | compatible = "ti,abb-v3"; |
| 955 | regulator-name = "abb_ivahd"; |
| 956 | #address-cells = <0>; |
| 957 | #size-cells = <0>; |
| 958 | clocks = <&sys_clkin1>; |
| 959 | ti,settling-time = <50>; |
| 960 | ti,clock-cycles = <16>; |
| 961 | |
| 962 | reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>, |
| 963 | <0x4ae06010 0x4>, <0x4a0025cc 0xc>, |
| 964 | <0x4a002470 0x4>; |
| 965 | reg-names = "setup-address", "control-address", |
| 966 | "int-address", "efuse-address", |
| 967 | "ldo-address"; |
| 968 | ti,tranxdone-status-mask = <0x40000000>; |
| 969 | /* LDOVBBIVA_FBB_MUX_CTRL */ |
| 970 | ti,ldovbb-override-mask = <0x400>; |
| 971 | /* LDOVBBIVA_FBB_VSET_OUT */ |
| 972 | ti,ldovbb-vset-mask = <0x1F>; |
| 973 | |
| 974 | /* |
| 975 | * NOTE: only FBB mode used but actual vset will |
| 976 | * determine final biasing |
| 977 | */ |
| 978 | ti,abb_info = < |
| 979 | /*uV ABB efuse rbb_m fbb_m vset_m*/ |
| 980 | 1055000 0 0x0 0 0x02000000 0x01F00000 |
| 981 | 1150000 0 0x4 0 0x02000000 0x01F00000 |
| 982 | 1250000 0 0x8 0 0x02000000 0x01F00000 |
| 983 | >; |
| 984 | }; |
| 985 | |
| 986 | abb_dspeve: regulator-abb-dspeve { |
| 987 | compatible = "ti,abb-v3"; |
| 988 | regulator-name = "abb_dspeve"; |
| 989 | #address-cells = <0>; |
| 990 | #size-cells = <0>; |
| 991 | clocks = <&sys_clkin1>; |
| 992 | ti,settling-time = <50>; |
| 993 | ti,clock-cycles = <16>; |
| 994 | |
| 995 | reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>, |
| 996 | <0x4ae06010 0x4>, <0x4a0025e0 0xc>, |
| 997 | <0x4a00246c 0x4>; |
| 998 | reg-names = "setup-address", "control-address", |
| 999 | "int-address", "efuse-address", |
| 1000 | "ldo-address"; |
| 1001 | ti,tranxdone-status-mask = <0x20000000>; |
| 1002 | /* LDOVBBDSPEVE_FBB_MUX_CTRL */ |
| 1003 | ti,ldovbb-override-mask = <0x400>; |
| 1004 | /* LDOVBBDSPEVE_FBB_VSET_OUT */ |
| 1005 | ti,ldovbb-vset-mask = <0x1F>; |
| 1006 | |
| 1007 | /* |
| 1008 | * NOTE: only FBB mode used but actual vset will |
| 1009 | * determine final biasing |
| 1010 | */ |
| 1011 | ti,abb_info = < |
| 1012 | /*uV ABB efuse rbb_m fbb_m vset_m*/ |
| 1013 | 1055000 0 0x0 0 0x02000000 0x01F00000 |
| 1014 | 1150000 0 0x4 0 0x02000000 0x01F00000 |
| 1015 | 1250000 0 0x8 0 0x02000000 0x01F00000 |
| 1016 | >; |
| 1017 | }; |
| 1018 | |
| 1019 | abb_gpu: regulator-abb-gpu { |
| 1020 | compatible = "ti,abb-v3"; |
| 1021 | regulator-name = "abb_gpu"; |
| 1022 | #address-cells = <0>; |
| 1023 | #size-cells = <0>; |
| 1024 | clocks = <&sys_clkin1>; |
| 1025 | ti,settling-time = <50>; |
| 1026 | ti,clock-cycles = <16>; |
| 1027 | |
| 1028 | reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>, |
| 1029 | <0x4ae06010 0x4>, <0x4a003b08 0xc>, |
| 1030 | <0x4ae0c154 0x4>; |
| 1031 | reg-names = "setup-address", "control-address", |
| 1032 | "int-address", "efuse-address", |
| 1033 | "ldo-address"; |
| 1034 | ti,tranxdone-status-mask = <0x10000000>; |
| 1035 | /* LDOVBBGPU_FBB_MUX_CTRL */ |
| 1036 | ti,ldovbb-override-mask = <0x400>; |
| 1037 | /* LDOVBBGPU_FBB_VSET_OUT */ |
| 1038 | ti,ldovbb-vset-mask = <0x1F>; |
| 1039 | |
| 1040 | /* |
| 1041 | * NOTE: only FBB mode used but actual vset will |
| 1042 | * determine final biasing |
| 1043 | */ |
| 1044 | ti,abb_info = < |
| 1045 | /*uV ABB efuse rbb_m fbb_m vset_m*/ |
| 1046 | 1090000 0 0x0 0 0x02000000 0x01F00000 |
| 1047 | 1210000 0 0x4 0 0x02000000 0x01F00000 |
| 1048 | 1280000 0 0x8 0 0x02000000 0x01F00000 |
| 1049 | >; |
| 1050 | }; |
| 1051 | |
| 1052 | mcspi1: spi@48098000 { |
| 1053 | compatible = "ti,omap4-mcspi"; |
| 1054 | reg = <0x48098000 0x200>; |
| 1055 | interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| 1056 | #address-cells = <1>; |
| 1057 | #size-cells = <0>; |
| 1058 | ti,hwmods = "mcspi1"; |
| 1059 | ti,spi-num-cs = <4>; |
| 1060 | dmas = <&sdma 35>, |
| 1061 | <&sdma 36>, |
| 1062 | <&sdma 37>, |
| 1063 | <&sdma 38>, |
| 1064 | <&sdma 39>, |
| 1065 | <&sdma 40>, |
| 1066 | <&sdma 41>, |
| 1067 | <&sdma 42>; |
| 1068 | dma-names = "tx0", "rx0", "tx1", "rx1", |
| 1069 | "tx2", "rx2", "tx3", "rx3"; |
| 1070 | status = "disabled"; |
| 1071 | }; |
| 1072 | |
| 1073 | mcspi2: spi@4809a000 { |
| 1074 | compatible = "ti,omap4-mcspi"; |
| 1075 | reg = <0x4809a000 0x200>; |
| 1076 | interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| 1077 | #address-cells = <1>; |
| 1078 | #size-cells = <0>; |
| 1079 | ti,hwmods = "mcspi2"; |
| 1080 | ti,spi-num-cs = <2>; |
| 1081 | dmas = <&sdma 43>, |
| 1082 | <&sdma 44>, |
| 1083 | <&sdma 45>, |
| 1084 | <&sdma 46>; |
| 1085 | dma-names = "tx0", "rx0", "tx1", "rx1"; |
| 1086 | status = "disabled"; |
| 1087 | }; |
| 1088 | |
| 1089 | mcspi3: spi@480b8000 { |
| 1090 | compatible = "ti,omap4-mcspi"; |
| 1091 | reg = <0x480b8000 0x200>; |
| 1092 | interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| 1093 | #address-cells = <1>; |
| 1094 | #size-cells = <0>; |
| 1095 | ti,hwmods = "mcspi3"; |
| 1096 | ti,spi-num-cs = <2>; |
| 1097 | dmas = <&sdma 15>, <&sdma 16>; |
| 1098 | dma-names = "tx0", "rx0"; |
| 1099 | status = "disabled"; |
| 1100 | }; |
| 1101 | |
| 1102 | mcspi4: spi@480ba000 { |
| 1103 | compatible = "ti,omap4-mcspi"; |
| 1104 | reg = <0x480ba000 0x200>; |
| 1105 | interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| 1106 | #address-cells = <1>; |
| 1107 | #size-cells = <0>; |
| 1108 | ti,hwmods = "mcspi4"; |
| 1109 | ti,spi-num-cs = <1>; |
| 1110 | dmas = <&sdma 70>, <&sdma 71>; |
| 1111 | dma-names = "tx0", "rx0"; |
| 1112 | status = "disabled"; |
| 1113 | }; |
| 1114 | |
| 1115 | qspi: qspi@4b300000 { |
| 1116 | compatible = "ti,dra7xxx-qspi"; |
Mugunthan V N | 23af70a | 2015-12-23 20:39:41 +0530 | [diff] [blame] | 1117 | reg = <0x4b300000 0x100>, |
| 1118 | <0x5c000000 0x4000000>, |
| 1119 | <0x4a002558 0x4>; |
| 1120 | reg-names = "qspi_base", "qspi_mmap", |
| 1121 | "qspi_ctrlmod"; |
Tom Rini | e33af1c | 2015-07-31 19:55:12 -0400 | [diff] [blame] | 1122 | #address-cells = <1>; |
| 1123 | #size-cells = <0>; |
| 1124 | ti,hwmods = "qspi"; |
| 1125 | clocks = <&qspi_gfclk_div>; |
| 1126 | clock-names = "fck"; |
| 1127 | num-cs = <4>; |
| 1128 | interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; |
| 1129 | status = "disabled"; |
| 1130 | }; |
| 1131 | |
| 1132 | omap_control_sata: control-phy@4a002374 { |
| 1133 | compatible = "ti,control-phy-pipe3"; |
| 1134 | reg = <0x4a002374 0x4>; |
| 1135 | reg-names = "power"; |
| 1136 | clocks = <&sys_clkin1>; |
| 1137 | clock-names = "sysclk"; |
| 1138 | }; |
| 1139 | |
| 1140 | /* OCP2SCP3 */ |
| 1141 | ocp2scp@4a090000 { |
| 1142 | compatible = "ti,omap-ocp2scp"; |
| 1143 | #address-cells = <1>; |
| 1144 | #size-cells = <1>; |
| 1145 | ranges; |
| 1146 | reg = <0x4a090000 0x20>; |
| 1147 | ti,hwmods = "ocp2scp3"; |
| 1148 | sata_phy: phy@4A096000 { |
| 1149 | compatible = "ti,phy-pipe3-sata"; |
| 1150 | reg = <0x4A096000 0x80>, /* phy_rx */ |
| 1151 | <0x4A096400 0x64>, /* phy_tx */ |
| 1152 | <0x4A096800 0x40>; /* pll_ctrl */ |
| 1153 | reg-names = "phy_rx", "phy_tx", "pll_ctrl"; |
| 1154 | ctrl-module = <&omap_control_sata>; |
| 1155 | clocks = <&sys_clkin1>, <&sata_ref_clk>; |
| 1156 | clock-names = "sysclk", "refclk"; |
| 1157 | #phy-cells = <0>; |
| 1158 | }; |
| 1159 | |
| 1160 | pcie1_phy: pciephy@4a094000 { |
| 1161 | compatible = "ti,phy-pipe3-pcie"; |
| 1162 | reg = <0x4a094000 0x80>, /* phy_rx */ |
| 1163 | <0x4a094400 0x64>; /* phy_tx */ |
| 1164 | reg-names = "phy_rx", "phy_tx"; |
| 1165 | ctrl-module = <&omap_control_pcie1phy>; |
| 1166 | clocks = <&dpll_pcie_ref_ck>, |
| 1167 | <&dpll_pcie_ref_m2ldo_ck>, |
| 1168 | <&optfclk_pciephy1_32khz>, |
| 1169 | <&optfclk_pciephy1_clk>, |
| 1170 | <&optfclk_pciephy1_div_clk>, |
| 1171 | <&optfclk_pciephy_div>; |
| 1172 | clock-names = "dpll_ref", "dpll_ref_m2", |
| 1173 | "wkupclk", "refclk", |
| 1174 | "div-clk", "phy-div"; |
| 1175 | #phy-cells = <0>; |
| 1176 | }; |
| 1177 | |
| 1178 | pcie2_phy: pciephy@4a095000 { |
| 1179 | compatible = "ti,phy-pipe3-pcie"; |
| 1180 | reg = <0x4a095000 0x80>, /* phy_rx */ |
| 1181 | <0x4a095400 0x64>; /* phy_tx */ |
| 1182 | reg-names = "phy_rx", "phy_tx"; |
| 1183 | ctrl-module = <&omap_control_pcie2phy>; |
| 1184 | clocks = <&dpll_pcie_ref_ck>, |
| 1185 | <&dpll_pcie_ref_m2ldo_ck>, |
| 1186 | <&optfclk_pciephy2_32khz>, |
| 1187 | <&optfclk_pciephy2_clk>, |
| 1188 | <&optfclk_pciephy2_div_clk>, |
| 1189 | <&optfclk_pciephy_div>; |
| 1190 | clock-names = "dpll_ref", "dpll_ref_m2", |
| 1191 | "wkupclk", "refclk", |
| 1192 | "div-clk", "phy-div"; |
| 1193 | #phy-cells = <0>; |
| 1194 | status = "disabled"; |
| 1195 | }; |
| 1196 | }; |
| 1197 | |
| 1198 | sata: sata@4a141100 { |
| 1199 | compatible = "snps,dwc-ahci"; |
| 1200 | reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; |
| 1201 | interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| 1202 | phys = <&sata_phy>; |
| 1203 | phy-names = "sata-phy"; |
| 1204 | clocks = <&sata_ref_clk>; |
| 1205 | ti,hwmods = "sata"; |
| 1206 | }; |
| 1207 | |
| 1208 | omap_control_pcie1phy: control-phy@0x4a003c40 { |
| 1209 | compatible = "ti,control-phy-pcie"; |
| 1210 | reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; |
| 1211 | reg-names = "power", "control_sma", "pcie_pcs"; |
| 1212 | clocks = <&sys_clkin1>; |
| 1213 | clock-names = "sysclk"; |
| 1214 | }; |
| 1215 | |
| 1216 | omap_control_pcie2phy: control-pcie@0x4a003c44 { |
| 1217 | compatible = "ti,control-phy-pcie"; |
| 1218 | reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; |
| 1219 | reg-names = "power", "control_sma", "pcie_pcs"; |
| 1220 | clocks = <&sys_clkin1>; |
| 1221 | clock-names = "sysclk"; |
| 1222 | status = "disabled"; |
| 1223 | }; |
| 1224 | |
| 1225 | rtc: rtc@48838000 { |
| 1226 | compatible = "ti,am3352-rtc"; |
| 1227 | reg = <0x48838000 0x100>; |
| 1228 | interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, |
| 1229 | <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; |
| 1230 | ti,hwmods = "rtcss"; |
| 1231 | clocks = <&sys_32k_ck>; |
| 1232 | }; |
| 1233 | |
| 1234 | omap_control_usb2phy1: control-phy@4a002300 { |
| 1235 | compatible = "ti,control-phy-usb2"; |
| 1236 | reg = <0x4a002300 0x4>; |
| 1237 | reg-names = "power"; |
| 1238 | }; |
| 1239 | |
| 1240 | omap_control_usb3phy1: control-phy@4a002370 { |
| 1241 | compatible = "ti,control-phy-pipe3"; |
| 1242 | reg = <0x4a002370 0x4>; |
| 1243 | reg-names = "power"; |
| 1244 | }; |
| 1245 | |
| 1246 | omap_control_usb2phy2: control-phy@0x4a002e74 { |
| 1247 | compatible = "ti,control-phy-usb2-dra7"; |
| 1248 | reg = <0x4a002e74 0x4>; |
| 1249 | reg-names = "power"; |
| 1250 | }; |
| 1251 | |
| 1252 | /* OCP2SCP1 */ |
| 1253 | ocp2scp@4a080000 { |
| 1254 | compatible = "ti,omap-ocp2scp"; |
| 1255 | #address-cells = <1>; |
| 1256 | #size-cells = <1>; |
| 1257 | ranges; |
| 1258 | reg = <0x4a080000 0x20>; |
| 1259 | ti,hwmods = "ocp2scp1"; |
| 1260 | |
| 1261 | usb2_phy1: phy@4a084000 { |
| 1262 | compatible = "ti,omap-usb2"; |
| 1263 | reg = <0x4a084000 0x400>; |
| 1264 | ctrl-module = <&omap_control_usb2phy1>; |
| 1265 | clocks = <&usb_phy1_always_on_clk32k>, |
| 1266 | <&usb_otg_ss1_refclk960m>; |
| 1267 | clock-names = "wkupclk", |
| 1268 | "refclk"; |
| 1269 | #phy-cells = <0>; |
| 1270 | }; |
| 1271 | |
| 1272 | usb2_phy2: phy@4a085000 { |
| 1273 | compatible = "ti,omap-usb2"; |
| 1274 | reg = <0x4a085000 0x400>; |
| 1275 | ctrl-module = <&omap_control_usb2phy2>; |
| 1276 | clocks = <&usb_phy2_always_on_clk32k>, |
| 1277 | <&usb_otg_ss2_refclk960m>; |
| 1278 | clock-names = "wkupclk", |
| 1279 | "refclk"; |
| 1280 | #phy-cells = <0>; |
| 1281 | }; |
| 1282 | |
| 1283 | usb3_phy1: phy@4a084400 { |
| 1284 | compatible = "ti,omap-usb3"; |
| 1285 | reg = <0x4a084400 0x80>, |
| 1286 | <0x4a084800 0x64>, |
| 1287 | <0x4a084c00 0x40>; |
| 1288 | reg-names = "phy_rx", "phy_tx", "pll_ctrl"; |
| 1289 | ctrl-module = <&omap_control_usb3phy1>; |
| 1290 | clocks = <&usb_phy3_always_on_clk32k>, |
| 1291 | <&sys_clkin1>, |
| 1292 | <&usb_otg_ss1_refclk960m>; |
| 1293 | clock-names = "wkupclk", |
| 1294 | "sysclk", |
| 1295 | "refclk"; |
| 1296 | #phy-cells = <0>; |
| 1297 | }; |
| 1298 | }; |
| 1299 | |
| 1300 | omap_dwc3_1: omap_dwc3_1@48880000 { |
| 1301 | compatible = "ti,dwc3"; |
| 1302 | ti,hwmods = "usb_otg_ss1"; |
| 1303 | reg = <0x48880000 0x10000>; |
| 1304 | interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| 1305 | #address-cells = <1>; |
| 1306 | #size-cells = <1>; |
| 1307 | utmi-mode = <2>; |
| 1308 | ranges; |
| 1309 | usb1: usb@48890000 { |
| 1310 | compatible = "snps,dwc3"; |
| 1311 | reg = <0x48890000 0x17000>; |
| 1312 | interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| 1313 | phys = <&usb2_phy1>, <&usb3_phy1>; |
| 1314 | phy-names = "usb2-phy", "usb3-phy"; |
| 1315 | tx-fifo-resize; |
| 1316 | maximum-speed = "super-speed"; |
| 1317 | dr_mode = "otg"; |
| 1318 | snps,dis_u3_susphy_quirk; |
| 1319 | snps,dis_u2_susphy_quirk; |
| 1320 | }; |
| 1321 | }; |
| 1322 | |
| 1323 | omap_dwc3_2: omap_dwc3_2@488c0000 { |
| 1324 | compatible = "ti,dwc3"; |
| 1325 | ti,hwmods = "usb_otg_ss2"; |
| 1326 | reg = <0x488c0000 0x10000>; |
| 1327 | interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| 1328 | #address-cells = <1>; |
| 1329 | #size-cells = <1>; |
| 1330 | utmi-mode = <2>; |
| 1331 | ranges; |
| 1332 | usb2: usb@488d0000 { |
| 1333 | compatible = "snps,dwc3"; |
| 1334 | reg = <0x488d0000 0x17000>; |
| 1335 | interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| 1336 | phys = <&usb2_phy2>; |
| 1337 | phy-names = "usb2-phy"; |
| 1338 | tx-fifo-resize; |
| 1339 | maximum-speed = "high-speed"; |
| 1340 | dr_mode = "otg"; |
| 1341 | snps,dis_u3_susphy_quirk; |
| 1342 | snps,dis_u2_susphy_quirk; |
| 1343 | }; |
| 1344 | }; |
| 1345 | |
| 1346 | /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */ |
| 1347 | omap_dwc3_3: omap_dwc3_3@48900000 { |
| 1348 | compatible = "ti,dwc3"; |
| 1349 | ti,hwmods = "usb_otg_ss3"; |
| 1350 | reg = <0x48900000 0x10000>; |
| 1351 | interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; |
| 1352 | #address-cells = <1>; |
| 1353 | #size-cells = <1>; |
| 1354 | utmi-mode = <2>; |
| 1355 | ranges; |
| 1356 | status = "disabled"; |
| 1357 | usb3: usb@48910000 { |
| 1358 | compatible = "snps,dwc3"; |
| 1359 | reg = <0x48910000 0x17000>; |
| 1360 | interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| 1361 | tx-fifo-resize; |
| 1362 | maximum-speed = "high-speed"; |
| 1363 | dr_mode = "otg"; |
| 1364 | snps,dis_u3_susphy_quirk; |
| 1365 | snps,dis_u2_susphy_quirk; |
| 1366 | }; |
| 1367 | }; |
| 1368 | |
| 1369 | elm: elm@48078000 { |
| 1370 | compatible = "ti,am3352-elm"; |
| 1371 | reg = <0x48078000 0xfc0>; /* device IO registers */ |
| 1372 | interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| 1373 | ti,hwmods = "elm"; |
| 1374 | status = "disabled"; |
| 1375 | }; |
| 1376 | |
| 1377 | gpmc: gpmc@50000000 { |
| 1378 | compatible = "ti,am3352-gpmc"; |
| 1379 | ti,hwmods = "gpmc"; |
| 1380 | reg = <0x50000000 0x37c>; /* device IO registers */ |
| 1381 | interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| 1382 | gpmc,num-cs = <8>; |
| 1383 | gpmc,num-waitpins = <2>; |
| 1384 | #address-cells = <2>; |
| 1385 | #size-cells = <1>; |
| 1386 | status = "disabled"; |
| 1387 | }; |
| 1388 | |
| 1389 | atl: atl@4843c000 { |
| 1390 | compatible = "ti,dra7-atl"; |
| 1391 | reg = <0x4843c000 0x3ff>; |
| 1392 | ti,hwmods = "atl"; |
| 1393 | ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>, |
| 1394 | <&atl_clkin2_ck>, <&atl_clkin3_ck>; |
| 1395 | clocks = <&atl_gfclk_mux>; |
| 1396 | clock-names = "fck"; |
| 1397 | status = "disabled"; |
| 1398 | }; |
| 1399 | |
| 1400 | crossbar_mpu: crossbar@4a002a48 { |
| 1401 | compatible = "ti,irq-crossbar"; |
| 1402 | reg = <0x4a002a48 0x130>; |
| 1403 | interrupt-controller; |
| 1404 | interrupt-parent = <&wakeupgen>; |
| 1405 | #interrupt-cells = <3>; |
| 1406 | ti,max-irqs = <160>; |
| 1407 | ti,max-crossbar-sources = <MAX_SOURCES>; |
| 1408 | ti,reg-size = <2>; |
| 1409 | ti,irqs-reserved = <0 1 2 3 5 6 131 132>; |
| 1410 | ti,irqs-skip = <10 133 139 140>; |
| 1411 | ti,irqs-safe-map = <0>; |
| 1412 | }; |
| 1413 | |
Mugunthan V N | 74b82da | 2016-04-28 15:36:10 +0530 | [diff] [blame] | 1414 | mac: ethernet@48484000 { |
Tom Rini | e33af1c | 2015-07-31 19:55:12 -0400 | [diff] [blame] | 1415 | compatible = "ti,cpsw"; |
| 1416 | ti,hwmods = "gmac"; |
| 1417 | clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>; |
| 1418 | clock-names = "fck", "cpts"; |
| 1419 | cpdma_channels = <8>; |
| 1420 | ale_entries = <1024>; |
| 1421 | bd_ram_size = <0x2000>; |
| 1422 | no_bd_ram = <0>; |
| 1423 | rx_descs = <64>; |
| 1424 | mac_control = <0x20>; |
| 1425 | slaves = <2>; |
| 1426 | active_slave = <0>; |
| 1427 | cpts_clock_mult = <0x80000000>; |
| 1428 | cpts_clock_shift = <29>; |
Mugunthan V N | ef3ad7b | 2016-04-28 15:36:09 +0530 | [diff] [blame] | 1429 | syscon = <&scm_conf>; |
Tom Rini | e33af1c | 2015-07-31 19:55:12 -0400 | [diff] [blame] | 1430 | reg = <0x48484000 0x1000 |
| 1431 | 0x48485200 0x2E00>; |
| 1432 | #address-cells = <1>; |
| 1433 | #size-cells = <1>; |
| 1434 | /* |
| 1435 | * rx_thresh_pend |
| 1436 | * rx_pend |
| 1437 | * tx_pend |
| 1438 | * misc_pend |
| 1439 | */ |
| 1440 | interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, |
| 1441 | <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, |
| 1442 | <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, |
| 1443 | <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; |
| 1444 | ranges; |
| 1445 | status = "disabled"; |
| 1446 | |
| 1447 | davinci_mdio: mdio@48485000 { |
| 1448 | compatible = "ti,davinci_mdio"; |
| 1449 | #address-cells = <1>; |
| 1450 | #size-cells = <0>; |
| 1451 | ti,hwmods = "davinci_mdio"; |
| 1452 | bus_freq = <1000000>; |
| 1453 | reg = <0x48485000 0x100>; |
| 1454 | }; |
| 1455 | |
| 1456 | cpsw_emac0: slave@48480200 { |
| 1457 | /* Filled in by U-Boot */ |
| 1458 | mac-address = [ 00 00 00 00 00 00 ]; |
| 1459 | }; |
| 1460 | |
| 1461 | cpsw_emac1: slave@48480300 { |
| 1462 | /* Filled in by U-Boot */ |
| 1463 | mac-address = [ 00 00 00 00 00 00 ]; |
| 1464 | }; |
| 1465 | |
| 1466 | phy_sel: cpsw-phy-sel@4a002554 { |
| 1467 | compatible = "ti,dra7xx-cpsw-phy-sel"; |
| 1468 | reg= <0x4a002554 0x4>; |
| 1469 | reg-names = "gmii-sel"; |
| 1470 | }; |
| 1471 | }; |
| 1472 | |
| 1473 | dcan1: can@481cc000 { |
| 1474 | compatible = "ti,dra7-d_can"; |
| 1475 | ti,hwmods = "dcan1"; |
| 1476 | reg = <0x4ae3c000 0x2000>; |
| 1477 | syscon-raminit = <&scm_conf 0x558 0>; |
| 1478 | interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; |
| 1479 | clocks = <&dcan1_sys_clk_mux>; |
| 1480 | status = "disabled"; |
| 1481 | }; |
| 1482 | |
| 1483 | dcan2: can@481d0000 { |
| 1484 | compatible = "ti,dra7-d_can"; |
| 1485 | ti,hwmods = "dcan2"; |
| 1486 | reg = <0x48480000 0x2000>; |
| 1487 | syscon-raminit = <&scm_conf 0x558 1>; |
| 1488 | interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; |
| 1489 | clocks = <&sys_clkin1>; |
| 1490 | status = "disabled"; |
| 1491 | }; |
| 1492 | |
| 1493 | dss: dss@58000000 { |
| 1494 | compatible = "ti,dra7-dss"; |
| 1495 | /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */ |
| 1496 | /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */ |
| 1497 | status = "disabled"; |
| 1498 | ti,hwmods = "dss_core"; |
| 1499 | /* CTRL_CORE_DSS_PLL_CONTROL */ |
| 1500 | syscon-pll-ctrl = <&scm_conf 0x538>; |
| 1501 | #address-cells = <1>; |
| 1502 | #size-cells = <1>; |
| 1503 | ranges; |
| 1504 | |
| 1505 | dispc@58001000 { |
| 1506 | compatible = "ti,dra7-dispc"; |
| 1507 | reg = <0x58001000 0x1000>; |
| 1508 | interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| 1509 | ti,hwmods = "dss_dispc"; |
| 1510 | clocks = <&dss_dss_clk>; |
| 1511 | clock-names = "fck"; |
| 1512 | /* CTRL_CORE_SMA_SW_1 */ |
| 1513 | syscon-pol = <&scm_conf 0x534>; |
| 1514 | }; |
| 1515 | |
| 1516 | hdmi: encoder@58060000 { |
| 1517 | compatible = "ti,dra7-hdmi"; |
| 1518 | reg = <0x58040000 0x200>, |
| 1519 | <0x58040200 0x80>, |
| 1520 | <0x58040300 0x80>, |
| 1521 | <0x58060000 0x19000>; |
| 1522 | reg-names = "wp", "pll", "phy", "core"; |
| 1523 | interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| 1524 | status = "disabled"; |
| 1525 | ti,hwmods = "dss_hdmi"; |
| 1526 | clocks = <&dss_48mhz_clk>, <&dss_hdmi_clk>; |
| 1527 | clock-names = "fck", "sys_clk"; |
| 1528 | }; |
| 1529 | }; |
| 1530 | }; |
| 1531 | |
| 1532 | thermal_zones: thermal-zones { |
| 1533 | #include "omap4-cpu-thermal.dtsi" |
| 1534 | #include "omap5-gpu-thermal.dtsi" |
| 1535 | #include "omap5-core-thermal.dtsi" |
| 1536 | }; |
| 1537 | |
| 1538 | }; |
| 1539 | |
| 1540 | &cpu_thermal { |
| 1541 | polling-delay = <500>; /* milliseconds */ |
| 1542 | }; |
| 1543 | |
| 1544 | /include/ "dra7xx-clocks.dtsi" |