blob: c987494b669dfee5f63a4684437ebb29e4ece69a [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Priyanka Jaind496c9f2010-10-26 14:52:19 +05302/*
3 * Copyright 2010 Freescale Semiconductor, Inc.
Biwen Li7e0e0262020-05-01 20:03:57 +08004 * Copyright 2020 NXP
Priyanka Jaind496c9f2010-10-26 14:52:19 +05305 *
6 * Author: Priyanka Jain <Priyanka.Jain@freescale.com>
Priyanka Jaind496c9f2010-10-26 14:52:19 +05307 */
8
9/*
10 * This file provides Date & Time support (no alarms) for PT7C4338 chip.
11 *
12 * This file is based on drivers/rtc/ds1337.c
13 *
14 * PT7C4338 chip is manufactured by Pericom Technology Inc.
15 * It is a serial real-time clock which provides
16 * 1)Low-power clock/calendar.
17 * 2)Programmable square-wave output.
18 * It has 56 bytes of nonvolatile RAM.
19 */
20
21#include <common.h>
22#include <command.h>
Biwen Li7e0e0262020-05-01 20:03:57 +080023#include <dm.h>
Simon Glass0f2af882020-05-10 11:40:05 -060024#include <log.h>
Priyanka Jaind496c9f2010-10-26 14:52:19 +053025#include <rtc.h>
26#include <i2c.h>
27
28/* RTC register addresses */
29#define RTC_SEC_REG_ADDR 0x0
30#define RTC_MIN_REG_ADDR 0x1
31#define RTC_HR_REG_ADDR 0x2
32#define RTC_DAY_REG_ADDR 0x3
33#define RTC_DATE_REG_ADDR 0x4
34#define RTC_MON_REG_ADDR 0x5
35#define RTC_YR_REG_ADDR 0x6
36#define RTC_CTL_STAT_REG_ADDR 0x7
37
38/* RTC second register address bit */
39#define RTC_SEC_BIT_CH 0x80 /* Clock Halt (in Register 0) */
40
41/* RTC control and status register bits */
42#define RTC_CTL_STAT_BIT_RS0 0x1 /* Rate select 0 */
43#define RTC_CTL_STAT_BIT_RS1 0x2 /* Rate select 1 */
44#define RTC_CTL_STAT_BIT_SQWE 0x10 /* Square Wave Enable */
45#define RTC_CTL_STAT_BIT_OSF 0x20 /* Oscillator Stop Flag */
46#define RTC_CTL_STAT_BIT_OUT 0x80 /* Output Level Control */
47
48/* RTC reset value */
49#define RTC_PT7C4338_RESET_VAL \
50 (RTC_CTL_STAT_BIT_RS0 | RTC_CTL_STAT_BIT_RS1 | RTC_CTL_STAT_BIT_OUT)
51
Biwen Li7e0e0262020-05-01 20:03:57 +080052#if !CONFIG_IS_ENABLED(DM_RTC)
Priyanka Jaind496c9f2010-10-26 14:52:19 +053053/****** Helper functions ****************************************/
54static u8 rtc_read(u8 reg)
55{
56 return i2c_reg_read(CONFIG_SYS_I2C_RTC_ADDR, reg);
57}
58
59static void rtc_write(u8 reg, u8 val)
60{
61 i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, reg, val);
62}
63/****************************************************************/
64
65/* Get the current time from the RTC */
66int rtc_get(struct rtc_time *tmp)
67{
68 int ret = 0;
69 u8 sec, min, hour, mday, wday, mon, year, ctl_stat;
70
71 ctl_stat = rtc_read(RTC_CTL_STAT_REG_ADDR);
72 sec = rtc_read(RTC_SEC_REG_ADDR);
73 min = rtc_read(RTC_MIN_REG_ADDR);
74 hour = rtc_read(RTC_HR_REG_ADDR);
75 wday = rtc_read(RTC_DAY_REG_ADDR);
76 mday = rtc_read(RTC_DATE_REG_ADDR);
77 mon = rtc_read(RTC_MON_REG_ADDR);
78 year = rtc_read(RTC_YR_REG_ADDR);
79 debug("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
80 "hr: %02x min: %02x sec: %02x control_status: %02x\n",
81 year, mon, mday, wday, hour, min, sec, ctl_stat);
82
83 if (ctl_stat & RTC_CTL_STAT_BIT_OSF) {
84 printf("### Warning: RTC oscillator has stopped\n");
85 /* clear the OSF flag */
86 rtc_write(RTC_CTL_STAT_REG_ADDR,
87 rtc_read(RTC_CTL_STAT_REG_ADDR)\
88 & ~RTC_CTL_STAT_BIT_OSF);
89 ret = -1;
90 }
91
92 tmp->tm_sec = bcd2bin(sec & 0x7F);
93 tmp->tm_min = bcd2bin(min & 0x7F);
94 tmp->tm_hour = bcd2bin(hour & 0x3F);
95 tmp->tm_mday = bcd2bin(mday & 0x3F);
96 tmp->tm_mon = bcd2bin(mon & 0x1F);
97 tmp->tm_year = bcd2bin(year) + 2000;
98 tmp->tm_wday = bcd2bin((wday - 1) & 0x07);
99 tmp->tm_yday = 0;
100 tmp->tm_isdst = 0;
101 debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
102 tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
103 tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
104
105 return ret;
106}
107
108/* Set the RTC */
109int rtc_set(struct rtc_time *tmp)
110{
111 debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
112 tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
113 tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
114
115 rtc_write(RTC_YR_REG_ADDR, bin2bcd(tmp->tm_year % 100));
116 rtc_write(RTC_MON_REG_ADDR, bin2bcd(tmp->tm_mon));
117 rtc_write(RTC_DAY_REG_ADDR, bin2bcd(tmp->tm_wday + 1));
118 rtc_write(RTC_DATE_REG_ADDR, bin2bcd(tmp->tm_mday));
119 rtc_write(RTC_HR_REG_ADDR, bin2bcd(tmp->tm_hour));
120 rtc_write(RTC_MIN_REG_ADDR, bin2bcd(tmp->tm_min));
121 rtc_write(RTC_SEC_REG_ADDR, bin2bcd(tmp->tm_sec));
122
123 return 0;
124}
125
126/* Reset the RTC */
127void rtc_reset(void)
128{
129 rtc_write(RTC_SEC_REG_ADDR, 0x00); /* clearing Clock Halt */
130 rtc_write(RTC_CTL_STAT_REG_ADDR, RTC_PT7C4338_RESET_VAL);
131}
Biwen Li7e0e0262020-05-01 20:03:57 +0800132#else
133static u8 rtc_read(struct udevice *dev, u8 reg)
134{
135 return dm_i2c_reg_read(dev, reg);
136}
137
138static void rtc_write(struct udevice *dev, u8 reg, u8 val)
139{
140 dm_i2c_reg_write(dev, reg, val);
141}
142
143static int pt7c4338_rtc_get(struct udevice *dev, struct rtc_time *tmp)
144{
145 int ret = 0;
146 u8 sec, min, hour, mday, wday, mon, year, ctl_stat;
147
148 ctl_stat = rtc_read(dev, RTC_CTL_STAT_REG_ADDR);
149 sec = rtc_read(dev, RTC_SEC_REG_ADDR);
150 min = rtc_read(dev, RTC_MIN_REG_ADDR);
151 hour = rtc_read(dev, RTC_HR_REG_ADDR);
152 wday = rtc_read(dev, RTC_DAY_REG_ADDR);
153 mday = rtc_read(dev, RTC_DATE_REG_ADDR);
154 mon = rtc_read(dev, RTC_MON_REG_ADDR);
155 year = rtc_read(dev, RTC_YR_REG_ADDR);
156 debug("Get RTC year: %02x mon: %02x mday: %02x wday: %02x\n",
157 year, mon, mday, wday);
158 debug("hr: %02x min: %02x sec: %02x control_status: %02x\n",
159 hour, min, sec, ctl_stat);
160
161 if (ctl_stat & RTC_CTL_STAT_BIT_OSF) {
162 printf("### Warning: RTC oscillator has stopped\n");
163 /* clear the OSF flag */
164 rtc_write(dev, RTC_CTL_STAT_REG_ADDR,
165 rtc_read(dev,
166 RTC_CTL_STAT_REG_ADDR)
167 & ~RTC_CTL_STAT_BIT_OSF);
168 ret = -1;
169 }
170
171 tmp->tm_sec = bcd2bin(sec & 0x7F);
172 tmp->tm_min = bcd2bin(min & 0x7F);
173 tmp->tm_hour = bcd2bin(hour & 0x3F);
174 tmp->tm_mday = bcd2bin(mday & 0x3F);
175 tmp->tm_mon = bcd2bin(mon & 0x1F);
176 tmp->tm_year = bcd2bin(year) + 2000;
177 tmp->tm_wday = bcd2bin((wday - 1) & 0x07);
178 tmp->tm_yday = 0;
179 tmp->tm_isdst = 0;
180 debug("Get DATE: %4d-%02d-%02d [wday=%d] TIME: %2d:%02d:%02d\n",
181 tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
182 tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
183
184 return ret;
185}
186
187static int pt7c4338_rtc_set(struct udevice *dev, const struct rtc_time *tmp)
188{
189 debug("Set DATE: %4d-%02d-%02d [wday=%d] TIME: %2d:%02d:%02d\n",
190 tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
191 tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
192
193 rtc_write(dev, RTC_YR_REG_ADDR, bin2bcd(tmp->tm_year % 100));
194 rtc_write(dev, RTC_MON_REG_ADDR, bin2bcd(tmp->tm_mon));
195 rtc_write(dev, RTC_DAY_REG_ADDR, bin2bcd(tmp->tm_wday + 1));
196 rtc_write(dev, RTC_DATE_REG_ADDR, bin2bcd(tmp->tm_mday));
197 rtc_write(dev, RTC_HR_REG_ADDR, bin2bcd(tmp->tm_hour));
198 rtc_write(dev, RTC_MIN_REG_ADDR, bin2bcd(tmp->tm_min));
199 rtc_write(dev, RTC_SEC_REG_ADDR, bin2bcd(tmp->tm_sec));
200
201 return 0;
202}
203
204static int pt7c4338_rtc_reset(struct udevice *dev)
205{
206 rtc_write(dev, RTC_SEC_REG_ADDR, 0x00); /* clearing Clock Halt */
207 rtc_write(dev, RTC_CTL_STAT_REG_ADDR, RTC_PT7C4338_RESET_VAL);
208 return 0;
209}
210
211static const struct rtc_ops pt7c4338_rtc_ops = {
212 .get = pt7c4338_rtc_get,
213 .set = pt7c4338_rtc_set,
214 .reset = pt7c4338_rtc_reset,
215};
216
217static const struct udevice_id pt7c4338_rtc_ids[] = {
218 { .compatible = "pericom,pt7c4338" },
219 { }
220};
221
222U_BOOT_DRIVER(rtc_pt7c4338) = {
223 .name = "rtc-pt7c4338",
224 .id = UCLASS_RTC,
225 .of_match = pt7c4338_rtc_ids,
226 .ops = &pt7c4338_rtc_ops,
227};
228#endif