Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* |
| 3 | * Copyright (c) 2021 Rockchip Electronics Co., Ltd. |
| 4 | */ |
| 5 | |
| 6 | #include "rk3588s.dtsi" |
| 7 | #include "rk3588-pinctrl.dtsi" |
| 8 | |
| 9 | / { |
Sebastian Reichel | e7f3959 | 2024-05-29 01:04:02 +0800 | [diff] [blame] | 10 | usb_host1_xhci: usb@fc400000 { |
| 11 | compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; |
| 12 | reg = <0x0 0xfc400000 0x0 0x400000>; |
| 13 | interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH 0>; |
| 14 | clocks = <&cru REF_CLK_USB3OTG1>, <&cru SUSPEND_CLK_USB3OTG1>, |
| 15 | <&cru ACLK_USB3OTG1>; |
| 16 | clock-names = "ref_clk", "suspend_clk", "bus_clk"; |
| 17 | dr_mode = "otg"; |
| 18 | phys = <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3>; |
| 19 | phy-names = "usb2-phy", "usb3-phy"; |
| 20 | phy_type = "utmi_wide"; |
| 21 | power-domains = <&power RK3588_PD_USB>; |
| 22 | resets = <&cru SRST_A_USB3OTG1>; |
| 23 | snps,dis_enblslpm_quirk; |
| 24 | snps,dis-u2-freeclk-exists-quirk; |
| 25 | snps,dis-del-phy-power-chg-quirk; |
| 26 | snps,dis-tx-ipgap-linecheck-quirk; |
| 27 | status = "disabled"; |
| 28 | }; |
| 29 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 30 | pcie30_phy_grf: syscon@fd5b8000 { |
| 31 | compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon"; |
| 32 | reg = <0x0 0xfd5b8000 0x0 0x10000>; |
| 33 | }; |
| 34 | |
| 35 | pipe_phy1_grf: syscon@fd5c0000 { |
| 36 | compatible = "rockchip,rk3588-pipe-phy-grf", "syscon"; |
| 37 | reg = <0x0 0xfd5c0000 0x0 0x100>; |
| 38 | }; |
| 39 | |
Sebastian Reichel | 00c0bfb | 2024-05-29 01:04:01 +0800 | [diff] [blame] | 40 | usbdpphy1_grf: syscon@fd5cc000 { |
| 41 | compatible = "rockchip,rk3588-usbdpphy-grf", "syscon"; |
| 42 | reg = <0x0 0xfd5cc000 0x0 0x4000>; |
| 43 | }; |
| 44 | |
| 45 | usb2phy1_grf: syscon@fd5d4000 { |
| 46 | compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; |
| 47 | reg = <0x0 0xfd5d4000 0x0 0x4000>; |
| 48 | #address-cells = <1>; |
| 49 | #size-cells = <1>; |
| 50 | |
| 51 | u2phy1: usb2phy@4000 { |
| 52 | compatible = "rockchip,rk3588-usb2phy"; |
| 53 | reg = <0x4000 0x10>; |
| 54 | #clock-cells = <0>; |
| 55 | clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; |
| 56 | clock-names = "phyclk"; |
| 57 | clock-output-names = "usb480m_phy1"; |
| 58 | interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>; |
| 59 | resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>; |
| 60 | reset-names = "phy", "apb"; |
| 61 | status = "disabled"; |
| 62 | |
| 63 | u2phy1_otg: otg-port { |
| 64 | #phy-cells = <0>; |
| 65 | status = "disabled"; |
| 66 | }; |
| 67 | }; |
| 68 | }; |
| 69 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 70 | i2s8_8ch: i2s@fddc8000 { |
| 71 | compatible = "rockchip,rk3588-i2s-tdm"; |
| 72 | reg = <0x0 0xfddc8000 0x0 0x1000>; |
| 73 | interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>; |
| 74 | clocks = <&cru MCLK_I2S8_8CH_TX>, <&cru MCLK_I2S8_8CH_TX>, <&cru HCLK_I2S8_8CH>; |
| 75 | clock-names = "mclk_tx", "mclk_rx", "hclk"; |
| 76 | assigned-clocks = <&cru CLK_I2S8_8CH_TX_SRC>; |
| 77 | assigned-clock-parents = <&cru PLL_AUPLL>; |
| 78 | dmas = <&dmac2 22>; |
| 79 | dma-names = "tx"; |
| 80 | power-domains = <&power RK3588_PD_VO0>; |
| 81 | resets = <&cru SRST_M_I2S8_8CH_TX>; |
| 82 | reset-names = "tx-m"; |
| 83 | #sound-dai-cells = <0>; |
| 84 | status = "disabled"; |
| 85 | }; |
| 86 | |
| 87 | i2s6_8ch: i2s@fddf4000 { |
| 88 | compatible = "rockchip,rk3588-i2s-tdm"; |
| 89 | reg = <0x0 0xfddf4000 0x0 0x1000>; |
| 90 | interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>; |
| 91 | clocks = <&cru MCLK_I2S6_8CH_TX>, <&cru MCLK_I2S6_8CH_TX>, <&cru HCLK_I2S6_8CH>; |
| 92 | clock-names = "mclk_tx", "mclk_rx", "hclk"; |
| 93 | assigned-clocks = <&cru CLK_I2S6_8CH_TX_SRC>; |
| 94 | assigned-clock-parents = <&cru PLL_AUPLL>; |
| 95 | dmas = <&dmac2 4>; |
| 96 | dma-names = "tx"; |
| 97 | power-domains = <&power RK3588_PD_VO1>; |
| 98 | resets = <&cru SRST_M_I2S6_8CH_TX>; |
| 99 | reset-names = "tx-m"; |
| 100 | #sound-dai-cells = <0>; |
| 101 | status = "disabled"; |
| 102 | }; |
| 103 | |
| 104 | i2s7_8ch: i2s@fddf8000 { |
| 105 | compatible = "rockchip,rk3588-i2s-tdm"; |
| 106 | reg = <0x0 0xfddf8000 0x0 0x1000>; |
| 107 | interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>; |
| 108 | clocks = <&cru MCLK_I2S7_8CH_RX>, <&cru MCLK_I2S7_8CH_RX>, <&cru HCLK_I2S7_8CH>; |
| 109 | clock-names = "mclk_tx", "mclk_rx", "hclk"; |
| 110 | assigned-clocks = <&cru CLK_I2S7_8CH_RX_SRC>; |
| 111 | assigned-clock-parents = <&cru PLL_AUPLL>; |
| 112 | dmas = <&dmac2 21>; |
| 113 | dma-names = "rx"; |
| 114 | power-domains = <&power RK3588_PD_VO1>; |
| 115 | resets = <&cru SRST_M_I2S7_8CH_RX>; |
| 116 | reset-names = "rx-m"; |
| 117 | #sound-dai-cells = <0>; |
| 118 | status = "disabled"; |
| 119 | }; |
| 120 | |
| 121 | i2s10_8ch: i2s@fde00000 { |
| 122 | compatible = "rockchip,rk3588-i2s-tdm"; |
| 123 | reg = <0x0 0xfde00000 0x0 0x1000>; |
| 124 | interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>; |
| 125 | clocks = <&cru MCLK_I2S10_8CH_RX>, <&cru MCLK_I2S10_8CH_RX>, <&cru HCLK_I2S10_8CH>; |
| 126 | clock-names = "mclk_tx", "mclk_rx", "hclk"; |
| 127 | assigned-clocks = <&cru CLK_I2S10_8CH_RX_SRC>; |
| 128 | assigned-clock-parents = <&cru PLL_AUPLL>; |
| 129 | dmas = <&dmac2 24>; |
| 130 | dma-names = "rx"; |
| 131 | power-domains = <&power RK3588_PD_VO1>; |
| 132 | resets = <&cru SRST_M_I2S10_8CH_RX>; |
| 133 | reset-names = "rx-m"; |
| 134 | #sound-dai-cells = <0>; |
| 135 | status = "disabled"; |
| 136 | }; |
| 137 | |
| 138 | pcie3x4: pcie@fe150000 { |
| 139 | compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; |
| 140 | #address-cells = <3>; |
| 141 | #size-cells = <2>; |
| 142 | bus-range = <0x00 0x0f>; |
| 143 | clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>, |
| 144 | <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>, |
| 145 | <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>; |
| 146 | clock-names = "aclk_mst", "aclk_slv", |
| 147 | "aclk_dbi", "pclk", |
| 148 | "aux", "pipe"; |
| 149 | device_type = "pci"; |
| 150 | interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>, |
| 151 | <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>, |
| 152 | <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>, |
| 153 | <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>, |
| 154 | <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>; |
| 155 | interrupt-names = "sys", "pmc", "msg", "legacy", "err"; |
| 156 | #interrupt-cells = <1>; |
| 157 | interrupt-map-mask = <0 0 0 7>; |
| 158 | interrupt-map = <0 0 0 1 &pcie3x4_intc 0>, |
| 159 | <0 0 0 2 &pcie3x4_intc 1>, |
| 160 | <0 0 0 3 &pcie3x4_intc 2>, |
| 161 | <0 0 0 4 &pcie3x4_intc 3>; |
| 162 | linux,pci-domain = <0>; |
| 163 | max-link-speed = <3>; |
| 164 | msi-map = <0x0000 &its1 0x0000 0x1000>; |
| 165 | num-lanes = <4>; |
| 166 | phys = <&pcie30phy>; |
| 167 | phy-names = "pcie-phy"; |
| 168 | power-domains = <&power RK3588_PD_PCIE>; |
| 169 | ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>, |
| 170 | <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x00e00000>, |
| 171 | <0x03000000 0x0 0x40000000 0x9 0x00000000 0x0 0x40000000>; |
| 172 | reg = <0xa 0x40000000 0x0 0x00400000>, |
| 173 | <0x0 0xfe150000 0x0 0x00010000>, |
| 174 | <0x0 0xf0000000 0x0 0x00100000>; |
| 175 | reg-names = "dbi", "apb", "config"; |
| 176 | resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>; |
| 177 | reset-names = "pwr", "pipe"; |
| 178 | status = "disabled"; |
| 179 | |
| 180 | pcie3x4_intc: legacy-interrupt-controller { |
| 181 | interrupt-controller; |
| 182 | #address-cells = <0>; |
| 183 | #interrupt-cells = <1>; |
| 184 | interrupt-parent = <&gic>; |
| 185 | interrupts = <GIC_SPI 260 IRQ_TYPE_EDGE_RISING 0>; |
| 186 | }; |
| 187 | }; |
| 188 | |
| 189 | pcie3x2: pcie@fe160000 { |
| 190 | compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; |
| 191 | #address-cells = <3>; |
| 192 | #size-cells = <2>; |
| 193 | bus-range = <0x10 0x1f>; |
| 194 | clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>, |
| 195 | <&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>, |
| 196 | <&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>; |
| 197 | clock-names = "aclk_mst", "aclk_slv", |
| 198 | "aclk_dbi", "pclk", |
| 199 | "aux", "pipe"; |
| 200 | device_type = "pci"; |
| 201 | interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>, |
| 202 | <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>, |
| 203 | <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>, |
| 204 | <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>, |
| 205 | <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>; |
| 206 | interrupt-names = "sys", "pmc", "msg", "legacy", "err"; |
| 207 | #interrupt-cells = <1>; |
| 208 | interrupt-map-mask = <0 0 0 7>; |
| 209 | interrupt-map = <0 0 0 1 &pcie3x2_intc 0>, |
| 210 | <0 0 0 2 &pcie3x2_intc 1>, |
| 211 | <0 0 0 3 &pcie3x2_intc 2>, |
| 212 | <0 0 0 4 &pcie3x2_intc 3>; |
| 213 | linux,pci-domain = <1>; |
| 214 | max-link-speed = <3>; |
| 215 | msi-map = <0x1000 &its1 0x1000 0x1000>; |
| 216 | num-lanes = <2>; |
| 217 | phys = <&pcie30phy>; |
| 218 | phy-names = "pcie-phy"; |
| 219 | power-domains = <&power RK3588_PD_PCIE>; |
| 220 | ranges = <0x01000000 0x0 0xf1100000 0x0 0xf1100000 0x0 0x00100000>, |
| 221 | <0x02000000 0x0 0xf1200000 0x0 0xf1200000 0x0 0x00e00000>, |
| 222 | <0x03000000 0x0 0x40000000 0x9 0x40000000 0x0 0x40000000>; |
| 223 | reg = <0xa 0x40400000 0x0 0x00400000>, |
| 224 | <0x0 0xfe160000 0x0 0x00010000>, |
| 225 | <0x0 0xf1000000 0x0 0x00100000>; |
| 226 | reg-names = "dbi", "apb", "config"; |
| 227 | resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>; |
| 228 | reset-names = "pwr", "pipe"; |
| 229 | status = "disabled"; |
| 230 | |
| 231 | pcie3x2_intc: legacy-interrupt-controller { |
| 232 | interrupt-controller; |
| 233 | #address-cells = <0>; |
| 234 | #interrupt-cells = <1>; |
| 235 | interrupt-parent = <&gic>; |
| 236 | interrupts = <GIC_SPI 255 IRQ_TYPE_EDGE_RISING 0>; |
| 237 | }; |
| 238 | }; |
| 239 | |
| 240 | pcie2x1l0: pcie@fe170000 { |
| 241 | compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; |
| 242 | bus-range = <0x20 0x2f>; |
| 243 | clocks = <&cru ACLK_PCIE_1L0_MSTR>, <&cru ACLK_PCIE_1L0_SLV>, |
| 244 | <&cru ACLK_PCIE_1L0_DBI>, <&cru PCLK_PCIE_1L0>, |
| 245 | <&cru CLK_PCIE_AUX2>, <&cru CLK_PCIE1L0_PIPE>; |
| 246 | clock-names = "aclk_mst", "aclk_slv", |
| 247 | "aclk_dbi", "pclk", |
| 248 | "aux", "pipe"; |
| 249 | device_type = "pci"; |
| 250 | interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>, |
| 251 | <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH 0>, |
| 252 | <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>, |
| 253 | <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH 0>, |
| 254 | <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>; |
| 255 | interrupt-names = "sys", "pmc", "msg", "legacy", "err"; |
| 256 | #interrupt-cells = <1>; |
| 257 | interrupt-map-mask = <0 0 0 7>; |
| 258 | interrupt-map = <0 0 0 1 &pcie2x1l0_intc 0>, |
| 259 | <0 0 0 2 &pcie2x1l0_intc 1>, |
| 260 | <0 0 0 3 &pcie2x1l0_intc 2>, |
| 261 | <0 0 0 4 &pcie2x1l0_intc 3>; |
| 262 | linux,pci-domain = <2>; |
| 263 | max-link-speed = <2>; |
| 264 | msi-map = <0x2000 &its0 0x2000 0x1000>; |
| 265 | num-lanes = <1>; |
| 266 | phys = <&combphy1_ps PHY_TYPE_PCIE>; |
| 267 | phy-names = "pcie-phy"; |
| 268 | power-domains = <&power RK3588_PD_PCIE>; |
| 269 | ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>, |
| 270 | <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x00e00000>, |
| 271 | <0x03000000 0x0 0x40000000 0x9 0x80000000 0x0 0x40000000>; |
| 272 | reg = <0xa 0x40800000 0x0 0x00400000>, |
| 273 | <0x0 0xfe170000 0x0 0x00010000>, |
| 274 | <0x0 0xf2000000 0x0 0x00100000>; |
| 275 | reg-names = "dbi", "apb", "config"; |
| 276 | resets = <&cru SRST_PCIE2_POWER_UP>, <&cru SRST_P_PCIE2>; |
| 277 | reset-names = "pwr", "pipe"; |
| 278 | #address-cells = <3>; |
| 279 | #size-cells = <2>; |
| 280 | status = "disabled"; |
| 281 | |
| 282 | pcie2x1l0_intc: legacy-interrupt-controller { |
| 283 | interrupt-controller; |
| 284 | #address-cells = <0>; |
| 285 | #interrupt-cells = <1>; |
| 286 | interrupt-parent = <&gic>; |
| 287 | interrupts = <GIC_SPI 240 IRQ_TYPE_EDGE_RISING 0>; |
| 288 | }; |
| 289 | }; |
| 290 | |
| 291 | gmac0: ethernet@fe1b0000 { |
| 292 | compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; |
| 293 | reg = <0x0 0xfe1b0000 0x0 0x10000>; |
| 294 | interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH 0>, |
| 295 | <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>; |
| 296 | interrupt-names = "macirq", "eth_wake_irq"; |
| 297 | clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>, |
| 298 | <&cru PCLK_GMAC0>, <&cru ACLK_GMAC0>, |
| 299 | <&cru CLK_GMAC0_PTP_REF>; |
| 300 | clock-names = "stmmaceth", "clk_mac_ref", |
| 301 | "pclk_mac", "aclk_mac", |
| 302 | "ptp_ref"; |
| 303 | power-domains = <&power RK3588_PD_GMAC>; |
| 304 | resets = <&cru SRST_A_GMAC0>; |
| 305 | reset-names = "stmmaceth"; |
| 306 | rockchip,grf = <&sys_grf>; |
| 307 | rockchip,php-grf = <&php_grf>; |
| 308 | snps,axi-config = <&gmac0_stmmac_axi_setup>; |
| 309 | snps,mixed-burst; |
| 310 | snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; |
| 311 | snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; |
| 312 | snps,tso; |
| 313 | status = "disabled"; |
| 314 | |
| 315 | mdio0: mdio { |
| 316 | compatible = "snps,dwmac-mdio"; |
| 317 | #address-cells = <0x1>; |
| 318 | #size-cells = <0x0>; |
| 319 | }; |
| 320 | |
| 321 | gmac0_stmmac_axi_setup: stmmac-axi-config { |
| 322 | snps,blen = <0 0 0 0 16 8 4>; |
| 323 | snps,wr_osr_lmt = <4>; |
| 324 | snps,rd_osr_lmt = <8>; |
| 325 | }; |
| 326 | |
| 327 | gmac0_mtl_rx_setup: rx-queues-config { |
| 328 | snps,rx-queues-to-use = <2>; |
| 329 | queue0 {}; |
| 330 | queue1 {}; |
| 331 | }; |
| 332 | |
| 333 | gmac0_mtl_tx_setup: tx-queues-config { |
| 334 | snps,tx-queues-to-use = <2>; |
| 335 | queue0 {}; |
| 336 | queue1 {}; |
| 337 | }; |
| 338 | }; |
| 339 | |
| 340 | sata1: sata@fe220000 { |
| 341 | compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci"; |
| 342 | reg = <0 0xfe220000 0 0x1000>; |
| 343 | interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>; |
| 344 | clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>, |
| 345 | <&cru CLK_RXOOB1>, <&cru CLK_PIPEPHY1_REF>, |
| 346 | <&cru CLK_PIPEPHY1_PIPE_ASIC_G>; |
| 347 | clock-names = "sata", "pmalive", "rxoob", "ref", "asic"; |
| 348 | ports-implemented = <0x1>; |
| 349 | #address-cells = <1>; |
| 350 | #size-cells = <0>; |
| 351 | status = "disabled"; |
| 352 | |
| 353 | sata-port@0 { |
| 354 | reg = <0>; |
| 355 | hba-port-cap = <HBA_PORT_FBSCP>; |
| 356 | phys = <&combphy1_ps PHY_TYPE_SATA>; |
| 357 | phy-names = "sata-phy"; |
| 358 | snps,rx-ts-max = <32>; |
| 359 | snps,tx-ts-max = <32>; |
| 360 | }; |
| 361 | }; |
| 362 | |
Sebastian Reichel | 00c0bfb | 2024-05-29 01:04:01 +0800 | [diff] [blame] | 363 | usbdp_phy1: phy@fed90000 { |
| 364 | compatible = "rockchip,rk3588-usbdp-phy"; |
| 365 | reg = <0x0 0xfed90000 0x0 0x10000>; |
| 366 | #phy-cells = <1>; |
| 367 | clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, |
| 368 | <&cru CLK_USBDP_PHY1_IMMORTAL>, |
| 369 | <&cru PCLK_USBDPPHY1>, |
| 370 | <&u2phy1>; |
| 371 | clock-names = "refclk", "immortal", "pclk", "utmi"; |
| 372 | resets = <&cru SRST_USBDP_COMBO_PHY1_INIT>, |
| 373 | <&cru SRST_USBDP_COMBO_PHY1_CMN>, |
| 374 | <&cru SRST_USBDP_COMBO_PHY1_LANE>, |
| 375 | <&cru SRST_USBDP_COMBO_PHY1_PCS>, |
| 376 | <&cru SRST_P_USBDPPHY1>; |
| 377 | reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; |
| 378 | rockchip,u2phy-grf = <&usb2phy1_grf>; |
| 379 | rockchip,usb-grf = <&usb_grf>; |
| 380 | rockchip,usbdpphy-grf = <&usbdpphy1_grf>; |
| 381 | rockchip,vo-grf = <&vo0_grf>; |
| 382 | status = "disabled"; |
| 383 | }; |
| 384 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 385 | combphy1_ps: phy@fee10000 { |
| 386 | compatible = "rockchip,rk3588-naneng-combphy"; |
| 387 | reg = <0x0 0xfee10000 0x0 0x100>; |
| 388 | clocks = <&cru CLK_REF_PIPE_PHY1>, <&cru PCLK_PCIE_COMBO_PIPE_PHY1>, |
| 389 | <&cru PCLK_PHP_ROOT>; |
| 390 | clock-names = "ref", "apb", "pipe"; |
| 391 | assigned-clocks = <&cru CLK_REF_PIPE_PHY1>; |
| 392 | assigned-clock-rates = <100000000>; |
| 393 | #phy-cells = <1>; |
| 394 | resets = <&cru SRST_REF_PIPE_PHY1>, <&cru SRST_P_PCIE2_PHY1>; |
| 395 | reset-names = "phy", "apb"; |
| 396 | rockchip,pipe-grf = <&php_grf>; |
| 397 | rockchip,pipe-phy-grf = <&pipe_phy1_grf>; |
| 398 | status = "disabled"; |
| 399 | }; |
| 400 | |
| 401 | pcie30phy: phy@fee80000 { |
| 402 | compatible = "rockchip,rk3588-pcie3-phy"; |
| 403 | reg = <0x0 0xfee80000 0x0 0x20000>; |
| 404 | #phy-cells = <0>; |
| 405 | clocks = <&cru PCLK_PCIE_COMBO_PIPE_PHY>; |
| 406 | clock-names = "pclk"; |
| 407 | resets = <&cru SRST_PCIE30_PHY>; |
| 408 | reset-names = "phy"; |
| 409 | rockchip,pipe-grf = <&php_grf>; |
| 410 | rockchip,phy-grf = <&pcie30_phy_grf>; |
| 411 | status = "disabled"; |
| 412 | }; |
| 413 | }; |