blob: 823405fb9e21c0d37a0752375180bcf626f74a7b [file] [log] [blame]
Peng Fandbf316a2015-07-20 19:28:35 +08001/*
2 * Copyright (C) 2015 Freescale Semiconductor, Inc.
3 *
4 * Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8#ifndef __MX6UL_14X14_EVK_CONFIG_H
9#define __MX6UL_14X14_EVK_CONFIG_H
10
Peng Fandbf316a2015-07-20 19:28:35 +080011#include <asm/arch/imx-regs.h>
12#include <linux/sizes.h>
13#include "mx6_common.h"
14#include <asm/imx-common/gpio.h>
15
Peng Fan5630c982015-09-06 15:02:34 +080016#define is_mx6ul_9x9_evk() CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK)
17
Peng Fandbf316a2015-07-20 19:28:35 +080018/* SPL options */
Peng Fandbf316a2015-07-20 19:28:35 +080019#include "imx6_spl.h"
20
Peng Fan5630c982015-09-06 15:02:34 +080021#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
22
Peng Fandbf316a2015-07-20 19:28:35 +080023#define CONFIG_DISPLAY_CPUINFO
24#define CONFIG_DISPLAY_BOARDINFO
25
26/* Size of malloc() pool */
27#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
28
29#define CONFIG_BOARD_EARLY_INIT_F
30#define CONFIG_BOARD_LATE_INIT
31
32#define CONFIG_MXC_UART
33#define CONFIG_MXC_UART_BASE UART1_BASE
34
Peng Fandbf316a2015-07-20 19:28:35 +080035/* MMC Configs */
36#ifdef CONFIG_FSL_USDHC
37#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
38
39/* NAND pin conflicts with usdhc2 */
40#ifdef CONFIG_NAND_MXS
41#define CONFIG_SYS_FSL_USDHC_NUM 1
42#else
43#define CONFIG_SYS_FSL_USDHC_NUM 2
44#endif
45
Peng Fandbf316a2015-07-20 19:28:35 +080046#endif
47
Peng Fandbf316a2015-07-20 19:28:35 +080048/* I2C configs */
Peng Fandbf316a2015-07-20 19:28:35 +080049#ifdef CONFIG_CMD_I2C
50#define CONFIG_SYS_I2C
51#define CONFIG_SYS_I2C_MXC
Albert ARIBAUD \\(3ADEV\\)eb943872015-09-21 22:43:38 +020052#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
53#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
Peng Fandbf316a2015-07-20 19:28:35 +080054#define CONFIG_SYS_I2C_SPEED 100000
Peng Fandbf316a2015-07-20 19:28:35 +080055
Peng Fan5630c982015-09-06 15:02:34 +080056/* PMIC only for 9X9 EVK */
57#define CONFIG_POWER
58#define CONFIG_POWER_I2C
59#define CONFIG_POWER_PFUZE3000
60#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
61#endif
Peng Fandbf316a2015-07-20 19:28:35 +080062
Peng Fandbf316a2015-07-20 19:28:35 +080063#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
64
65#define CONFIG_EXTRA_ENV_SETTINGS \
66 "script=boot.scr\0" \
67 "image=zImage\0" \
68 "console=ttymxc0\0" \
69 "fdt_high=0xffffffff\0" \
70 "initrd_high=0xffffffff\0" \
Peng Fan5630c982015-09-06 15:02:34 +080071 "fdt_file=undefined\0" \
Peng Fandbf316a2015-07-20 19:28:35 +080072 "fdt_addr=0x83000000\0" \
73 "boot_fdt=try\0" \
74 "ip_dyn=yes\0" \
Peng Fan60c72b62015-10-29 15:54:48 +080075 "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
Peng Fandbf316a2015-07-20 19:28:35 +080076 "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
77 "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
78 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
79 "mmcautodetect=yes\0" \
80 "mmcargs=setenv bootargs console=${console},${baudrate} " \
81 "root=${mmcroot}\0" \
82 "loadbootscript=" \
83 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
84 "bootscript=echo Running bootscript from mmc ...; " \
85 "source\0" \
86 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
87 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
88 "mmcboot=echo Booting from mmc ...; " \
89 "run mmcargs; " \
90 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
91 "if run loadfdt; then " \
92 "bootz ${loadaddr} - ${fdt_addr}; " \
93 "else " \
94 "if test ${boot_fdt} = try; then " \
95 "bootz; " \
96 "else " \
97 "echo WARN: Cannot load the DT; " \
98 "fi; " \
99 "fi; " \
100 "else " \
101 "bootz; " \
102 "fi;\0" \
103 "netargs=setenv bootargs console=${console},${baudrate} " \
104 "root=/dev/nfs " \
105 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
106 "netboot=echo Booting from net ...; " \
107 "run netargs; " \
108 "if test ${ip_dyn} = yes; then " \
109 "setenv get_cmd dhcp; " \
110 "else " \
111 "setenv get_cmd tftp; " \
112 "fi; " \
113 "${get_cmd} ${image}; " \
114 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
115 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
116 "bootz ${loadaddr} - ${fdt_addr}; " \
117 "else " \
118 "if test ${boot_fdt} = try; then " \
119 "bootz; " \
120 "else " \
121 "echo WARN: Cannot load the DT; " \
122 "fi; " \
123 "fi; " \
124 "else " \
125 "bootz; " \
Peng Fan5630c982015-09-06 15:02:34 +0800126 "fi;\0" \
127 "findfdt="\
128 "if test $fdt_file = undefined; then " \
129 "if test $board_name = EVK && test $board_rev = 9X9; then " \
130 "setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \
131 "if test $board_name = EVK && test $board_rev = 14X14; then " \
132 "setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \
133 "if test $fdt_file = undefined; then " \
134 "echo WARNING: Could not determine dtb to use; fi; " \
135 "fi;\0" \
Peng Fandbf316a2015-07-20 19:28:35 +0800136
137#define CONFIG_BOOTCOMMAND \
Peng Fan5630c982015-09-06 15:02:34 +0800138 "run findfdt;" \
Peng Fandbf316a2015-07-20 19:28:35 +0800139 "mmc dev ${mmcdev};" \
140 "mmc dev ${mmcdev}; if mmc rescan; then " \
141 "if run loadbootscript; then " \
142 "run bootscript; " \
143 "else " \
144 "if run loadimage; then " \
145 "run mmcboot; " \
146 "else run netboot; " \
147 "fi; " \
148 "fi; " \
149 "else run netboot; fi"
150
151/* Miscellaneous configurable options */
Peng Fandbf316a2015-07-20 19:28:35 +0800152#define CONFIG_SYS_MEMTEST_START 0x80000000
Peng Fana03003a2016-01-05 14:03:36 +0800153#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
Peng Fandbf316a2015-07-20 19:28:35 +0800154
155#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
156#define CONFIG_SYS_HZ 1000
157
158#define CONFIG_CMDLINE_EDITING
159#define CONFIG_STACKSIZE SZ_128K
160
161/* Physical Memory Map */
162#define CONFIG_NR_DRAM_BANKS 1
163#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
164
165#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
166#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
167#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
168
169#define CONFIG_SYS_INIT_SP_OFFSET \
170 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
171#define CONFIG_SYS_INIT_SP_ADDR \
172 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
173
174/* FLASH and environment organization */
175#define CONFIG_SYS_NO_FLASH
176
177#define CONFIG_ENV_SIZE SZ_8K
178#define CONFIG_ENV_IS_IN_MMC
179#define CONFIG_ENV_OFFSET (8 * SZ_64K)
180#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
181#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
182#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
183
Peng Fandbf316a2015-07-20 19:28:35 +0800184#define CONFIG_CMD_BMODE
185
186#ifndef CONFIG_SYS_DCACHE_OFF
Peng Fandbf316a2015-07-20 19:28:35 +0800187#endif
188
Fabio Estevam0aa74102016-02-17 17:32:14 -0200189#define CONFIG_FSL_QSPI
Peng Fandbf316a2015-07-20 19:28:35 +0800190#ifdef CONFIG_FSL_QSPI
Peng Fandbf316a2015-07-20 19:28:35 +0800191#define CONFIG_SPI_FLASH
Peng Fandbf316a2015-07-20 19:28:35 +0800192#define CONFIG_SPI_FLASH_BAR
193#define CONFIG_SF_DEFAULT_BUS 0
194#define CONFIG_SF_DEFAULT_CS 0
195#define CONFIG_SF_DEFAULT_SPEED 40000000
196#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
Peng Fan7eca9372016-01-19 15:13:52 +0800197#define CONFIG_SPI_FLASH_STMICRO
Peng Fandbf316a2015-07-20 19:28:35 +0800198#define FSL_QSPI_FLASH_NUM 1
199#define FSL_QSPI_FLASH_SIZE SZ_32M
200#endif
201
202/* USB Configs */
Peng Fandbf316a2015-07-20 19:28:35 +0800203#ifdef CONFIG_CMD_USB
204#define CONFIG_USB_EHCI
205#define CONFIG_USB_EHCI_MX6
Peng Fandbf316a2015-07-20 19:28:35 +0800206#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
207#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
208#define CONFIG_MXC_USB_FLAGS 0
209#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
210#endif
211
Peng Fan32cfb352015-08-12 17:46:52 +0800212#ifdef CONFIG_CMD_NET
213#define CONFIG_FEC_MXC
214#define CONFIG_MII
215#define CONFIG_FEC_ENET_DEV 1
216
217#if (CONFIG_FEC_ENET_DEV == 0)
218#define IMX_FEC_BASE ENET_BASE_ADDR
219#define CONFIG_FEC_MXC_PHYADDR 0x2
220#define CONFIG_FEC_XCV_TYPE RMII
221#elif (CONFIG_FEC_ENET_DEV == 1)
222#define IMX_FEC_BASE ENET2_BASE_ADDR
223#define CONFIG_FEC_MXC_PHYADDR 0x1
224#define CONFIG_FEC_XCV_TYPE RMII
225#endif
226#define CONFIG_ETHPRIME "FEC"
227
228#define CONFIG_PHYLIB
229#define CONFIG_PHY_MICREL
Peng Fan32cfb352015-08-12 17:46:52 +0800230#endif
231
Adrian Alonsoce08c362015-09-02 13:54:13 -0500232#define CONFIG_IMX_THERMAL
Peng Fandbf316a2015-07-20 19:28:35 +0800233
Peng Fanc0eaca22016-01-04 12:19:14 +0800234#ifndef CONFIG_SPL_BUILD
Peng Fan60c72b62015-10-29 15:54:48 +0800235#define CONFIG_VIDEO
236#ifdef CONFIG_VIDEO
237#define CONFIG_CFB_CONSOLE
238#define CONFIG_VIDEO_MXS
239#define CONFIG_VIDEO_LOGO
240#define CONFIG_VIDEO_SW_CURSOR
241#define CONFIG_VGA_AS_SINGLE_DEVICE
242#define CONFIG_SYS_CONSOLE_IS_IN_ENV
243#define CONFIG_SPLASH_SCREEN
244#define CONFIG_SPLASH_SCREEN_ALIGN
245#define CONFIG_CMD_BMP
246#define CONFIG_BMP_16BPP
247#define CONFIG_VIDEO_BMP_RLE8
248#define CONFIG_VIDEO_BMP_LOGO
249#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
250#endif
Peng Fanc0eaca22016-01-04 12:19:14 +0800251#endif
Peng Fan60c72b62015-10-29 15:54:48 +0800252
Peng Fandbf316a2015-07-20 19:28:35 +0800253#endif