Macpaul Lin | 199c625 | 2010-12-21 16:59:46 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Faraday FTGMAC100 Ethernet |
| 3 | * |
| 4 | * (C) Copyright 2009 Faraday Technology |
| 5 | * Po-Yu Chuang <ratbert@faraday-tech.com> |
| 6 | * |
| 7 | * (C) Copyright 2010 Andes Technology |
| 8 | * Macpaul Lin <macpaul@andestech.com> |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or modify |
| 11 | * it under the terms of the GNU General Public License as published by |
| 12 | * the Free Software Foundation; either version 2 of the License, or |
| 13 | * (at your option) any later version. |
| 14 | * |
| 15 | * This program is distributed in the hope that it will be useful, |
| 16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 18 | * GNU General Public License for more details. |
| 19 | * |
| 20 | * You should have received a copy of the GNU General Public License |
| 21 | * along with this program; if not, write to the Free Software |
| 22 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 23 | */ |
| 24 | |
| 25 | #include <config.h> |
| 26 | #include <common.h> |
| 27 | #include <malloc.h> |
| 28 | #include <net.h> |
| 29 | #include <asm/io.h> |
| 30 | #include <linux/mii.h> |
| 31 | |
| 32 | #include "ftgmac100.h" |
| 33 | |
| 34 | #define ETH_ZLEN 60 |
| 35 | |
| 36 | #define mdelay(n) ({unsigned long msec = (n); while (msec--) udelay(1000); }) |
| 37 | |
| 38 | /* RBSR - hw default init value is also 0x640 */ |
| 39 | #define RBSR_DEFAULT_VALUE 0x640 |
| 40 | |
| 41 | /* PKTBUFSTX/PKTBUFSRX must both be power of 2 */ |
| 42 | #define PKTBUFSTX 4 /* must be power of 2 */ |
| 43 | |
| 44 | struct ftgmac100_data { |
| 45 | struct ftgmac100_txdes txdes[PKTBUFSTX]; |
| 46 | struct ftgmac100_rxdes rxdes[PKTBUFSRX]; |
| 47 | int tx_index; |
| 48 | int rx_index; |
| 49 | int phy_addr; |
| 50 | }; |
| 51 | |
| 52 | /* |
| 53 | * struct mii_bus functions |
| 54 | */ |
| 55 | static int ftgmac100_mdiobus_read(struct eth_device *dev, int phy_addr, |
| 56 | int regnum) |
| 57 | { |
| 58 | struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; |
| 59 | int phycr; |
| 60 | int i; |
| 61 | |
| 62 | phycr = readl(&ftgmac100->phycr); |
| 63 | |
| 64 | /* preserve MDC cycle threshold */ |
| 65 | phycr &= FTGMAC100_PHYCR_MDC_CYCTHR_MASK; |
| 66 | |
| 67 | phycr |= FTGMAC100_PHYCR_PHYAD(phy_addr) |
| 68 | | FTGMAC100_PHYCR_REGAD(regnum) |
| 69 | | FTGMAC100_PHYCR_MIIRD; |
| 70 | |
| 71 | writel(phycr, &ftgmac100->phycr); |
| 72 | |
| 73 | for (i = 0; i < 10; i++) { |
| 74 | phycr = readl(&ftgmac100->phycr); |
| 75 | |
| 76 | if ((phycr & FTGMAC100_PHYCR_MIIRD) == 0) { |
| 77 | int data; |
| 78 | |
| 79 | data = readl(&ftgmac100->phydata); |
| 80 | return FTGMAC100_PHYDATA_MIIRDATA(data); |
| 81 | } |
| 82 | |
| 83 | mdelay(10); |
| 84 | } |
| 85 | |
| 86 | debug("mdio read timed out\n"); |
| 87 | return -1; |
| 88 | } |
| 89 | |
| 90 | static int ftgmac100_mdiobus_write(struct eth_device *dev, int phy_addr, |
| 91 | int regnum, u16 value) |
| 92 | { |
| 93 | struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; |
| 94 | int phycr; |
| 95 | int data; |
| 96 | int i; |
| 97 | |
| 98 | phycr = readl(&ftgmac100->phycr); |
| 99 | |
| 100 | /* preserve MDC cycle threshold */ |
| 101 | phycr &= FTGMAC100_PHYCR_MDC_CYCTHR_MASK; |
| 102 | |
| 103 | phycr |= FTGMAC100_PHYCR_PHYAD(phy_addr) |
| 104 | | FTGMAC100_PHYCR_REGAD(regnum) |
| 105 | | FTGMAC100_PHYCR_MIIWR; |
| 106 | |
| 107 | data = FTGMAC100_PHYDATA_MIIWDATA(value); |
| 108 | |
| 109 | writel(data, &ftgmac100->phydata); |
| 110 | writel(phycr, &ftgmac100->phycr); |
| 111 | |
| 112 | for (i = 0; i < 10; i++) { |
| 113 | phycr = readl(&ftgmac100->phycr); |
| 114 | |
| 115 | if ((phycr & FTGMAC100_PHYCR_MIIWR) == 0) { |
| 116 | debug("(phycr & FTGMAC100_PHYCR_MIIWR) == 0: " \ |
| 117 | "phy_addr: %x\n", phy_addr); |
| 118 | return 0; |
| 119 | } |
| 120 | |
| 121 | mdelay(1); |
| 122 | } |
| 123 | |
| 124 | debug("mdio write timed out\n"); |
| 125 | return -1; |
| 126 | } |
| 127 | |
| 128 | int ftgmac100_phy_read(struct eth_device *dev, int addr, int reg, u16 *value) |
| 129 | { |
| 130 | *value = ftgmac100_mdiobus_read(dev , addr, reg); |
| 131 | |
| 132 | if (*value == -1) |
| 133 | return -1; |
| 134 | |
| 135 | return 0; |
| 136 | } |
| 137 | |
| 138 | int ftgmac100_phy_write(struct eth_device *dev, int addr, int reg, u16 value) |
| 139 | { |
| 140 | if (ftgmac100_mdiobus_write(dev, addr, reg, value) == -1) |
| 141 | return -1; |
| 142 | |
| 143 | return 0; |
| 144 | } |
| 145 | |
| 146 | static int ftgmac100_phy_reset(struct eth_device *dev) |
| 147 | { |
| 148 | struct ftgmac100_data *priv = dev->priv; |
| 149 | int i; |
| 150 | u16 status, adv; |
| 151 | |
| 152 | adv = ADVERTISE_CSMA | ADVERTISE_ALL; |
| 153 | |
| 154 | ftgmac100_phy_write(dev, priv->phy_addr, MII_ADVERTISE, adv); |
| 155 | |
| 156 | printf("%s: Starting autonegotiation...\n", dev->name); |
| 157 | |
| 158 | ftgmac100_phy_write(dev, priv->phy_addr, |
| 159 | MII_BMCR, (BMCR_ANENABLE | BMCR_ANRESTART)); |
| 160 | |
| 161 | for (i = 0; i < 100000 / 100; i++) { |
| 162 | ftgmac100_phy_read(dev, priv->phy_addr, MII_BMSR, &status); |
| 163 | |
| 164 | if (status & BMSR_ANEGCOMPLETE) |
| 165 | break; |
| 166 | mdelay(1); |
| 167 | } |
| 168 | |
| 169 | if (status & BMSR_ANEGCOMPLETE) { |
| 170 | printf("%s: Autonegotiation complete\n", dev->name); |
| 171 | } else { |
| 172 | printf("%s: Autonegotiation timed out (status=0x%04x)\n", |
| 173 | dev->name, status); |
| 174 | return 0; |
| 175 | } |
| 176 | |
| 177 | return 1; |
| 178 | } |
| 179 | |
| 180 | static int ftgmac100_phy_init(struct eth_device *dev) |
| 181 | { |
| 182 | struct ftgmac100_data *priv = dev->priv; |
| 183 | |
| 184 | int phy_addr; |
| 185 | u16 phy_id, status, adv, lpa, stat_ge; |
| 186 | int media, speed, duplex; |
| 187 | int i; |
| 188 | |
| 189 | /* Check if the PHY is up to snuff... */ |
| 190 | for (phy_addr = 0; phy_addr < CONFIG_PHY_MAX_ADDR; phy_addr++) { |
| 191 | |
| 192 | ftgmac100_phy_read(dev, phy_addr, MII_PHYSID1, &phy_id); |
| 193 | |
| 194 | /* |
| 195 | * When it is unable to found PHY, |
| 196 | * the interface usually return 0xffff or 0x0000 |
| 197 | */ |
| 198 | if (phy_id != 0xffff && phy_id != 0x0) { |
| 199 | printf("%s: found PHY at 0x%02x\n", |
| 200 | dev->name, phy_addr); |
| 201 | priv->phy_addr = phy_addr; |
| 202 | break; |
| 203 | } |
| 204 | } |
| 205 | |
| 206 | if (phy_id == 0xffff || phy_id == 0x0) { |
| 207 | printf("%s: no PHY present\n", dev->name); |
| 208 | return 0; |
| 209 | } |
| 210 | |
| 211 | ftgmac100_phy_read(dev, priv->phy_addr, MII_BMSR, &status); |
| 212 | |
| 213 | if (!(status & BMSR_LSTATUS)) { |
| 214 | /* Try to re-negotiate if we don't have link already. */ |
| 215 | ftgmac100_phy_reset(dev); |
| 216 | |
| 217 | for (i = 0; i < 100000 / 100; i++) { |
| 218 | ftgmac100_phy_read(dev, priv->phy_addr, |
| 219 | MII_BMSR, &status); |
| 220 | if (status & BMSR_LSTATUS) |
| 221 | break; |
| 222 | udelay(100); |
| 223 | } |
| 224 | } |
| 225 | |
| 226 | if (!(status & BMSR_LSTATUS)) { |
| 227 | printf("%s: link down\n", dev->name); |
| 228 | return 0; |
| 229 | } |
| 230 | |
| 231 | #ifdef CONFIG_FTGMAC100_EGIGA |
| 232 | /* 1000 Base-T Status Register */ |
| 233 | ftgmac100_phy_read(dev, priv->phy_addr, |
| 234 | MII_STAT1000, &stat_ge); |
| 235 | |
| 236 | speed = (stat_ge & (LPA_1000FULL | LPA_1000HALF) |
| 237 | ? 1 : 0); |
| 238 | |
| 239 | duplex = ((stat_ge & LPA_1000FULL) |
| 240 | ? 1 : 0); |
| 241 | |
| 242 | if (speed) { /* Speed is 1000 */ |
| 243 | printf("%s: link up, 1000bps %s-duplex\n", |
| 244 | dev->name, duplex ? "full" : "half"); |
| 245 | return 0; |
| 246 | } |
| 247 | #endif |
| 248 | |
| 249 | ftgmac100_phy_read(dev, priv->phy_addr, MII_ADVERTISE, &adv); |
| 250 | ftgmac100_phy_read(dev, priv->phy_addr, MII_LPA, &lpa); |
| 251 | |
| 252 | media = mii_nway_result(lpa & adv); |
| 253 | speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? 1 : 0); |
| 254 | duplex = (media & ADVERTISE_FULL) ? 1 : 0; |
| 255 | |
| 256 | printf("%s: link up, %sMbps %s-duplex\n", |
| 257 | dev->name, speed ? "100" : "10", duplex ? "full" : "half"); |
| 258 | |
| 259 | return 1; |
| 260 | } |
| 261 | |
| 262 | static int ftgmac100_update_link_speed(struct eth_device *dev) |
| 263 | { |
| 264 | struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; |
| 265 | struct ftgmac100_data *priv = dev->priv; |
| 266 | |
| 267 | unsigned short stat_fe; |
| 268 | unsigned short stat_ge; |
| 269 | unsigned int maccr; |
| 270 | |
| 271 | #ifdef CONFIG_FTGMAC100_EGIGA |
| 272 | /* 1000 Base-T Status Register */ |
| 273 | ftgmac100_phy_read(dev, priv->phy_addr, MII_STAT1000, &stat_ge); |
| 274 | #endif |
| 275 | |
| 276 | ftgmac100_phy_read(dev, priv->phy_addr, MII_BMSR, &stat_fe); |
| 277 | |
| 278 | if (!(stat_fe & BMSR_LSTATUS)) /* link status up? */ |
| 279 | return 0; |
| 280 | |
| 281 | /* read MAC control register and clear related bits */ |
| 282 | maccr = readl(&ftgmac100->maccr) & |
| 283 | ~(FTGMAC100_MACCR_GIGA_MODE | |
| 284 | FTGMAC100_MACCR_FAST_MODE | |
| 285 | FTGMAC100_MACCR_FULLDUP); |
| 286 | |
| 287 | #ifdef CONFIG_FTGMAC100_EGIGA |
| 288 | if (stat_ge & LPA_1000FULL) { |
| 289 | /* set gmac for 1000BaseTX and Full Duplex */ |
| 290 | maccr |= FTGMAC100_MACCR_GIGA_MODE | FTGMAC100_MACCR_FULLDUP; |
| 291 | } |
| 292 | |
| 293 | if (stat_ge & LPA_1000HALF) { |
| 294 | /* set gmac for 1000BaseTX and Half Duplex */ |
| 295 | maccr |= FTGMAC100_MACCR_GIGA_MODE; |
| 296 | } |
| 297 | #endif |
| 298 | |
| 299 | if (stat_fe & BMSR_100FULL) { |
| 300 | /* set MII for 100BaseTX and Full Duplex */ |
| 301 | maccr |= FTGMAC100_MACCR_FAST_MODE | FTGMAC100_MACCR_FULLDUP; |
| 302 | } |
| 303 | |
| 304 | if (stat_fe & BMSR_10FULL) { |
| 305 | /* set MII for 10BaseT and Full Duplex */ |
| 306 | maccr |= FTGMAC100_MACCR_FULLDUP; |
| 307 | } |
| 308 | |
| 309 | if (stat_fe & BMSR_100HALF) { |
| 310 | /* set MII for 100BaseTX and Half Duplex */ |
| 311 | maccr |= FTGMAC100_MACCR_FAST_MODE; |
| 312 | } |
| 313 | |
| 314 | if (stat_fe & BMSR_10HALF) { |
| 315 | /* set MII for 10BaseT and Half Duplex */ |
| 316 | /* we have already clear these bits, do nothing */ |
| 317 | ; |
| 318 | } |
| 319 | |
| 320 | /* update MII config into maccr */ |
| 321 | writel(maccr, &ftgmac100->maccr); |
| 322 | |
| 323 | return 1; |
| 324 | } |
| 325 | |
| 326 | /* |
| 327 | * Reset MAC |
| 328 | */ |
| 329 | static void ftgmac100_reset(struct eth_device *dev) |
| 330 | { |
| 331 | struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; |
| 332 | |
| 333 | debug("%s()\n", __func__); |
| 334 | |
| 335 | writel(FTGMAC100_MACCR_SW_RST, &ftgmac100->maccr); |
| 336 | |
| 337 | while (readl(&ftgmac100->maccr) & FTGMAC100_MACCR_SW_RST) |
| 338 | ; |
| 339 | } |
| 340 | |
| 341 | /* |
| 342 | * Set MAC address |
| 343 | */ |
| 344 | static void ftgmac100_set_mac(struct eth_device *dev, |
| 345 | const unsigned char *mac) |
| 346 | { |
| 347 | struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; |
| 348 | unsigned int maddr = mac[0] << 8 | mac[1]; |
| 349 | unsigned int laddr = mac[2] << 24 | mac[3] << 16 | mac[4] << 8 | mac[5]; |
| 350 | |
| 351 | debug("%s(%x %x)\n", __func__, maddr, laddr); |
| 352 | |
| 353 | writel(maddr, &ftgmac100->mac_madr); |
| 354 | writel(laddr, &ftgmac100->mac_ladr); |
| 355 | } |
| 356 | |
| 357 | static void ftgmac100_set_mac_from_env(struct eth_device *dev) |
| 358 | { |
| 359 | eth_getenv_enetaddr("ethaddr", dev->enetaddr); |
| 360 | |
| 361 | ftgmac100_set_mac(dev, dev->enetaddr); |
| 362 | } |
| 363 | |
| 364 | /* |
| 365 | * disable transmitter, receiver |
| 366 | */ |
| 367 | static void ftgmac100_halt(struct eth_device *dev) |
| 368 | { |
| 369 | struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; |
| 370 | |
| 371 | debug("%s()\n", __func__); |
| 372 | |
| 373 | writel(0, &ftgmac100->maccr); |
| 374 | } |
| 375 | |
| 376 | static int ftgmac100_init(struct eth_device *dev, bd_t *bd) |
| 377 | { |
| 378 | struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; |
| 379 | struct ftgmac100_data *priv = dev->priv; |
| 380 | struct ftgmac100_txdes *txdes = priv->txdes; |
| 381 | struct ftgmac100_rxdes *rxdes = priv->rxdes; |
| 382 | unsigned int maccr; |
| 383 | int i; |
| 384 | |
| 385 | debug("%s()\n", __func__); |
| 386 | |
| 387 | ftgmac100_reset(dev); |
| 388 | |
| 389 | /* set the ethernet address */ |
| 390 | ftgmac100_set_mac_from_env(dev); |
| 391 | |
| 392 | /* disable all interrupts */ |
| 393 | writel(0, &ftgmac100->ier); |
| 394 | |
| 395 | /* initialize descriptors */ |
| 396 | priv->tx_index = 0; |
| 397 | priv->rx_index = 0; |
| 398 | |
| 399 | txdes[PKTBUFSTX - 1].txdes0 = FTGMAC100_TXDES0_EDOTR; |
| 400 | rxdes[PKTBUFSRX - 1].rxdes0 = FTGMAC100_RXDES0_EDORR; |
| 401 | |
| 402 | for (i = 0; i < PKTBUFSTX; i++) { |
| 403 | /* TXBUF_BADR */ |
| 404 | txdes[i].txdes3 = 0; |
| 405 | txdes[i].txdes1 = 0; |
| 406 | } |
| 407 | |
| 408 | for (i = 0; i < PKTBUFSRX; i++) { |
| 409 | /* RXBUF_BADR */ |
| 410 | rxdes[i].rxdes3 = (unsigned int)NetRxPackets[i]; |
| 411 | rxdes[i].rxdes0 &= ~FTGMAC100_RXDES0_RXPKT_RDY; |
| 412 | } |
| 413 | |
| 414 | /* transmit ring */ |
| 415 | writel((unsigned int)txdes, &ftgmac100->txr_badr); |
| 416 | |
| 417 | /* receive ring */ |
| 418 | writel((unsigned int)rxdes, &ftgmac100->rxr_badr); |
| 419 | |
| 420 | /* poll receive descriptor automatically */ |
| 421 | writel(FTGMAC100_APTC_RXPOLL_CNT(1), &ftgmac100->aptc); |
| 422 | |
| 423 | /* config receive buffer size register */ |
| 424 | writel(FTGMAC100_RBSR_SIZE(RBSR_DEFAULT_VALUE), &ftgmac100->rbsr); |
| 425 | |
| 426 | /* enable transmitter, receiver */ |
| 427 | maccr = FTGMAC100_MACCR_TXMAC_EN | |
| 428 | FTGMAC100_MACCR_RXMAC_EN | |
| 429 | FTGMAC100_MACCR_TXDMA_EN | |
| 430 | FTGMAC100_MACCR_RXDMA_EN | |
| 431 | FTGMAC100_MACCR_CRC_APD | |
| 432 | FTGMAC100_MACCR_FULLDUP | |
| 433 | FTGMAC100_MACCR_RX_RUNT | |
| 434 | FTGMAC100_MACCR_RX_BROADPKT; |
| 435 | |
| 436 | writel(maccr, &ftgmac100->maccr); |
| 437 | |
| 438 | if (!ftgmac100_phy_init(dev)) { |
| 439 | if (!ftgmac100_update_link_speed(dev)) |
| 440 | return -1; |
| 441 | } |
| 442 | |
| 443 | return 0; |
| 444 | } |
| 445 | |
| 446 | /* |
| 447 | * Get a data block via Ethernet |
| 448 | */ |
| 449 | static int ftgmac100_recv(struct eth_device *dev) |
| 450 | { |
| 451 | struct ftgmac100_data *priv = dev->priv; |
| 452 | struct ftgmac100_rxdes *curr_des; |
| 453 | unsigned short rxlen; |
| 454 | |
| 455 | curr_des = &priv->rxdes[priv->rx_index]; |
| 456 | |
| 457 | if (!(curr_des->rxdes0 & FTGMAC100_RXDES0_RXPKT_RDY)) |
| 458 | return -1; |
| 459 | |
| 460 | if (curr_des->rxdes0 & (FTGMAC100_RXDES0_RX_ERR | |
| 461 | FTGMAC100_RXDES0_CRC_ERR | |
| 462 | FTGMAC100_RXDES0_FTL | |
| 463 | FTGMAC100_RXDES0_RUNT | |
| 464 | FTGMAC100_RXDES0_RX_ODD_NB)) { |
| 465 | return -1; |
| 466 | } |
| 467 | |
| 468 | rxlen = FTGMAC100_RXDES0_VDBC(curr_des->rxdes0); |
| 469 | |
| 470 | debug("%s(): RX buffer %d, %x received\n", |
| 471 | __func__, priv->rx_index, rxlen); |
| 472 | |
| 473 | /* pass the packet up to the protocol layers. */ |
| 474 | NetReceive((void *)curr_des->rxdes3, rxlen); |
| 475 | |
| 476 | /* release buffer to DMA */ |
| 477 | curr_des->rxdes0 &= ~FTGMAC100_RXDES0_RXPKT_RDY; |
| 478 | |
| 479 | priv->rx_index = (priv->rx_index + 1) % PKTBUFSRX; |
| 480 | |
| 481 | return 0; |
| 482 | } |
| 483 | |
| 484 | /* |
| 485 | * Send a data block via Ethernet |
| 486 | */ |
| 487 | static int |
| 488 | ftgmac100_send(struct eth_device *dev, void *packet, int length) |
| 489 | { |
| 490 | struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; |
| 491 | struct ftgmac100_data *priv = dev->priv; |
| 492 | struct ftgmac100_txdes *curr_des = &priv->txdes[priv->tx_index]; |
| 493 | int start; |
| 494 | |
| 495 | if (curr_des->txdes0 & FTGMAC100_TXDES0_TXDMA_OWN) { |
| 496 | debug("%s(): no TX descriptor available\n", __func__); |
| 497 | return -1; |
| 498 | } |
| 499 | |
| 500 | debug("%s(%x, %x)\n", __func__, (int)packet, length); |
| 501 | |
| 502 | length = (length < ETH_ZLEN) ? ETH_ZLEN : length; |
| 503 | |
| 504 | /* initiate a transmit sequence */ |
| 505 | curr_des->txdes3 = (unsigned int)packet; /* TXBUF_BADR */ |
| 506 | |
| 507 | /* only one descriptor on TXBUF */ |
| 508 | curr_des->txdes0 &= FTGMAC100_TXDES0_EDOTR; |
| 509 | curr_des->txdes0 |= FTGMAC100_TXDES0_FTS | |
| 510 | FTGMAC100_TXDES0_LTS | |
| 511 | FTGMAC100_TXDES0_TXBUF_SIZE(length) | |
| 512 | FTGMAC100_TXDES0_TXDMA_OWN ; |
| 513 | |
| 514 | /* start transmit */ |
| 515 | writel(1, &ftgmac100->txpd); |
| 516 | |
| 517 | /* wait for transfer to succeed */ |
| 518 | start = get_timer(0); |
| 519 | while (curr_des->txdes0 & FTGMAC100_TXDES0_TXDMA_OWN) { |
| 520 | if (get_timer(0) >= 5) { |
| 521 | debug("%s(): timed out\n", __func__); |
| 522 | return -1; |
| 523 | } |
| 524 | } |
| 525 | |
| 526 | debug("%s(): packet sent\n", __func__); |
| 527 | |
| 528 | priv->tx_index = (priv->tx_index + 1) % PKTBUFSTX; |
| 529 | |
| 530 | return 0; |
| 531 | } |
| 532 | |
| 533 | int ftgmac100_initialize(bd_t *bd) |
| 534 | { |
| 535 | struct eth_device *dev; |
| 536 | struct ftgmac100_data *priv; |
| 537 | |
| 538 | dev = malloc(sizeof *dev); |
| 539 | if (!dev) { |
| 540 | printf("%s(): failed to allocate dev\n", __func__); |
| 541 | goto out; |
| 542 | } |
| 543 | |
| 544 | /* Transmit and receive descriptors should align to 16 bytes */ |
| 545 | priv = memalign(16, sizeof(struct ftgmac100_data)); |
| 546 | if (!priv) { |
| 547 | printf("%s(): failed to allocate priv\n", __func__); |
| 548 | goto free_dev; |
| 549 | } |
| 550 | |
| 551 | memset(dev, 0, sizeof(*dev)); |
| 552 | memset(priv, 0, sizeof(*priv)); |
| 553 | |
| 554 | sprintf(dev->name, "FTGMAC100"); |
| 555 | dev->iobase = CONFIG_FTGMAC100_BASE; |
| 556 | dev->init = ftgmac100_init; |
| 557 | dev->halt = ftgmac100_halt; |
| 558 | dev->send = ftgmac100_send; |
| 559 | dev->recv = ftgmac100_recv; |
| 560 | dev->priv = priv; |
| 561 | |
| 562 | eth_register(dev); |
| 563 | |
| 564 | return 1; |
| 565 | |
| 566 | free_dev: |
| 567 | free(dev); |
| 568 | out: |
| 569 | return 0; |
| 570 | } |