| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| 2 | /* |
| 3 | * Device Tree Source for the RZ/G2UL Type-1 SMARC EVK board |
| 4 | * |
| 5 | * Copyright (C) 2022 Renesas Electronics Corp. |
| 6 | */ |
| 7 | |
| 8 | /dts-v1/; |
| 9 | |
| 10 | /* |
| 11 | * DIP-Switch SW1 setting |
| 12 | * 1 : High; 0: Low |
| 13 | * SW1-2 : SW_SD0_DEV_SEL (0: uSD; 1: eMMC) |
| 14 | * SW1-3 : SW_ET0_EN_N (0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1) |
| 15 | * Please change below macros according to SW1 setting on the SoM |
| 16 | */ |
| 17 | #define SW_SW0_DEV_SEL 1 |
| 18 | #define SW_ET0_EN_N 1 |
| 19 | |
| 20 | /* |
| 21 | * To enable MTU3a PWM on PMOD0, |
| 22 | * - Set DIP-Switch SW1-3 to On position. |
| 23 | * - Set PMOD_MTU3 macro to 1. |
| 24 | */ |
| 25 | #define PMOD_MTU3 0 |
| 26 | |
| 27 | #if (PMOD_MTU3 && !SW_ET0_EN_N) |
| 28 | #error "Cannot set as both PMOD_MTU3 and !SW_ET0_EN_N are mutually exclusive" |
| 29 | #endif |
| 30 | |
| 31 | #include "r9a07g043u.dtsi" |
| 32 | #include "rzg2ul-smarc-som.dtsi" |
| 33 | #include "rzg2ul-smarc.dtsi" |
| 34 | |
| 35 | / { |
| 36 | model = "Renesas SMARC EVK based on r9a07g043u11"; |
| 37 | compatible = "renesas,smarc-evk", "renesas,r9a07g043u11", "renesas,r9a07g043"; |
| 38 | }; |