Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 7f3384df41e8609fe820aad3947b4781642c8822 / . / arch / arm / dts / stm32mp157-pinctrl.dtsi
blob: 0aae69b0a04818a8e94075dfdf7ba3d8d88bc9d6 [file] [log] [blame]
Patrick Delaunay50599142018-07-09 15:17:19 +0200[diff] [blame]1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
4 * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
5 */
6#include <dt-bindings/pinctrl/stm32-pinfunc.h>
7
8/ {
9 soc {
10 pinctrl: pin-controller@50002000 {
11 #address-cells = <1>;
12 #size-cells = <1>;
13 compatible = "st,stm32mp157-pinctrl";
14 ranges = <0 0x50002000 0xa400>;
15 interrupt-parent = <&exti>;
16 st,syscfg = <&exti 0x60 0xff>;
17 pins-are-numbered;
18
19 gpioa: gpio@50002000 {
20 gpio-controller;
21 #gpio-cells = <2>;
22 interrupt-controller;
23 #interrupt-cells = <2>;
24 reg = <0x0 0x400>;
25 clocks = <&rcc GPIOA>;
26 st,bank-name = "GPIOA";
27 ngpios = <16>;
28 gpio-ranges = <&pinctrl 0 0 16>;
29 };
30
31 gpiob: gpio@50003000 {
32 gpio-controller;
33 #gpio-cells = <2>;
34 interrupt-controller;
35 #interrupt-cells = <2>;
36 reg = <0x1000 0x400>;
37 clocks = <&rcc GPIOB>;
38 st,bank-name = "GPIOB";
39 ngpios = <16>;
40 gpio-ranges = <&pinctrl 0 16 16>;
41 };
42
43 gpioc: gpio@50004000 {
44 gpio-controller;
45 #gpio-cells = <2>;
46 interrupt-controller;
47 #interrupt-cells = <2>;
48 reg = <0x2000 0x400>;
49 clocks = <&rcc GPIOC>;
50 st,bank-name = "GPIOC";
51 ngpios = <16>;
52 gpio-ranges = <&pinctrl 0 32 16>;
53 };
54
55 gpiod: gpio@50005000 {
56 gpio-controller;
57 #gpio-cells = <2>;
58 interrupt-controller;
59 #interrupt-cells = <2>;
60 reg = <0x3000 0x400>;
61 clocks = <&rcc GPIOD>;
62 st,bank-name = "GPIOD";
63 ngpios = <16>;
64 gpio-ranges = <&pinctrl 0 48 16>;
65 };
66
67 gpioe: gpio@50006000 {
68 gpio-controller;
69 #gpio-cells = <2>;
70 interrupt-controller;
71 #interrupt-cells = <2>;
72 reg = <0x4000 0x400>;
73 clocks = <&rcc GPIOE>;
74 st,bank-name = "GPIOE";
75 ngpios = <16>;
76 gpio-ranges = <&pinctrl 0 64 16>;
77 };
78
79 gpiof: gpio@50007000 {
80 gpio-controller;
81 #gpio-cells = <2>;
82 interrupt-controller;
83 #interrupt-cells = <2>;
84 reg = <0x5000 0x400>;
85 clocks = <&rcc GPIOF>;
86 st,bank-name = "GPIOF";
87 ngpios = <16>;
88 gpio-ranges = <&pinctrl 0 80 16>;
89 };
90
91 gpiog: gpio@50008000 {
92 gpio-controller;
93 #gpio-cells = <2>;
94 interrupt-controller;
95 #interrupt-cells = <2>;
96 reg = <0x6000 0x400>;
97 clocks = <&rcc GPIOG>;
98 st,bank-name = "GPIOG";
99 ngpios = <16>;
100 gpio-ranges = <&pinctrl 0 96 16>;
101 };
102
103 gpioh: gpio@50009000 {
104 gpio-controller;
105 #gpio-cells = <2>;
106 interrupt-controller;
107 #interrupt-cells = <2>;
108 reg = <0x7000 0x400>;
109 clocks = <&rcc GPIOH>;
110 st,bank-name = "GPIOH";
111 ngpios = <16>;
112 gpio-ranges = <&pinctrl 0 112 16>;
113 };
114
115 gpioi: gpio@5000a000 {
116 gpio-controller;
117 #gpio-cells = <2>;
118 interrupt-controller;
119 #interrupt-cells = <2>;
120 reg = <0x8000 0x400>;
121 clocks = <&rcc GPIOI>;
122 st,bank-name = "GPIOI";
123 ngpios = <16>;
124 gpio-ranges = <&pinctrl 0 128 16>;
125 };
126
127 gpioj: gpio@5000b000 {
128 gpio-controller;
129 #gpio-cells = <2>;
130 interrupt-controller;
131 #interrupt-cells = <2>;
132 reg = <0x9000 0x400>;
133 clocks = <&rcc GPIOJ>;
134 st,bank-name = "GPIOJ";
135 ngpios = <16>;
136 gpio-ranges = <&pinctrl 0 144 16>;
137 };
138
139 gpiok: gpio@5000c000 {
140 gpio-controller;
141 #gpio-cells = <2>;
142 interrupt-controller;
143 #interrupt-cells = <2>;
144 reg = <0xa000 0x400>;
145 clocks = <&rcc GPIOK>;
146 st,bank-name = "GPIOK";
147 ngpios = <8>;
148 gpio-ranges = <&pinctrl 0 160 8>;
149 };
150
Patrice Chotarde861c202019-02-12 16:50:41 +0100[diff] [blame]151 adc12_usb_pwr_pins_a: adc12-usb-pwr-pins-0 {
152 pins {
153 pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */
154 <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */
155 };
156 };
157
Patrick Delaunay50599142018-07-09 15:17:19 +0200[diff] [blame]158 cec_pins_a: cec-0 {
159 pins {
160 pinmux = <STM32_PINMUX('A', 15, AF4)>;
161 bias-disable;
162 drive-open-drain;
163 slew-rate = <0>;
164 };
165 };
166
Patrice Chotard00442d02019-02-12 16:50:38 +0100[diff] [blame]167 ethernet0_rgmii_pins_a: rgmii-0 {
168 pins1 {
169 pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
170 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
171 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
172 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
173 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
174 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
175 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
176 <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
177 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
178 bias-disable;
179 drive-push-pull;
180 slew-rate = <3>;
181 };
182 pins2 {
183 pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
184 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
185 <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
186 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
187 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
188 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
189 bias-disable;
190 };
191 };
192
193 ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 {
194 pins1 {
195 pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
196 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
197 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
198 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
199 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
200 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
201 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
202 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
203 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
204 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
205 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
206 <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */
207 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
208 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
209 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
210 };
211 };
212
Patrick Delaunay50599142018-07-09 15:17:19 +0200[diff] [blame]213 i2c1_pins_a: i2c1-0 {
214 pins {
215 pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
216 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
217 bias-disable;
218 drive-open-drain;
219 slew-rate = <0>;
220 };
221 };
222
223 i2c2_pins_a: i2c2-0 {
224 pins {
225 pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
226 <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
227 bias-disable;
228 drive-open-drain;
229 slew-rate = <0>;
230 };
231 };
232
233 i2c5_pins_a: i2c5-0 {
234 pins {
235 pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
236 <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */
237 bias-disable;
238 drive-open-drain;
239 slew-rate = <0>;
240 };
241 };
242
Patrice Chotard00442d02019-02-12 16:50:38 +0100[diff] [blame]243 m_can1_pins_a: m-can1-0 {
244 pins1 {
245 pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
246 slew-rate = <1>;
247 drive-push-pull;
248 bias-disable;
249 };
250 pins2 {
251 pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */
252 bias-disable;
253 };
254 };
255
Patrick Delaunay50599142018-07-09 15:17:19 +0200[diff] [blame]256 pwm2_pins_a: pwm2-0 {
257 pins {
258 pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
259 bias-pull-down;
260 drive-push-pull;
261 slew-rate = <0>;
262 };
263 };
264
265 pwm8_pins_a: pwm8-0 {
266 pins {
267 pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
268 bias-pull-down;
269 drive-push-pull;
270 slew-rate = <0>;
271 };
272 };
273
274 pwm12_pins_a: pwm12-0 {
275 pins {
276 pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
277 bias-pull-down;
278 drive-push-pull;
279 slew-rate = <0>;
280 };
281 };
282
283 qspi_clk_pins_a: qspi-clk-0 {
284 pins {
285 pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
286 bias-disable;
287 drive-push-pull;
288 slew-rate = <3>;
289 };
290 };
291
292 qspi_bk1_pins_a: qspi-bk1-0 {
293 pins1 {
294 pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
295 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
296 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
297 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
298 bias-disable;
299 drive-push-pull;
300 slew-rate = <3>;
301 };
302 pins2 {
303 pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
304 bias-pull-up;
305 drive-push-pull;
306 slew-rate = <3>;
307 };
308 };
309
310 qspi_bk2_pins_a: qspi-bk2-0 {
311 pins1 {
312 pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
313 <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
314 <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
315 <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
316 bias-disable;
317 drive-push-pull;
318 slew-rate = <3>;
319 };
320 pins2 {
321 pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
322 bias-pull-up;
323 drive-push-pull;
324 slew-rate = <3>;
325 };
326 };
327 sdmmc1_b4_pins_a: sdmmc1-b4@0 {
328 pins {
329 pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
330 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
331 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
332 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
333 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
334 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
335 slew-rate = <3>;
336 drive-push-pull;
337 bias-disable;
338 };
339 };
340
341 sdmmc1_dir_pins_a: sdmmc1-dir@0 {
342 pins {
343 pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
344 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
345 <STM32_PINMUX('B', 9, AF11)>, /* SDMMC1_CDIR */
346 <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
347 slew-rate = <3>;
348 drive-push-pull;
349 bias-pull-up;
350 };
351 };
352 sdmmc2_b4_pins_a: sdmmc2-b4@0 {
353 pins {
354 pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
355 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
356 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
357 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
358 <STM32_PINMUX('E', 3, AF9)>, /* SDMMC2_CK */
359 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
360 slew-rate = <3>;
361 drive-push-pull;
362 bias-pull-up;
363 };
364 };
365
366 sdmmc2_d47_pins_a: sdmmc2-d47@0 {
367 pins {
368 pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
369 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
370 <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
371 <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
372 slew-rate = <3>;
373 drive-push-pull;
374 bias-pull-up;
375 };
376 };
377
Patrick Delaunay7f3384d2019-03-29 15:42:24 +0100[diff] [blame^]378 stusb1600_pins_a: stusb1600-0 {
379 pins {
380 pinmux = <STM32_PINMUX('I', 11, ANALOG)>;
381 bias-pull-up;
382 };
383 };
384
Patrick Delaunay50599142018-07-09 15:17:19 +0200[diff] [blame]385 uart4_pins_a: uart4-0 {
386 pins1 {
387 pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
388 bias-disable;
389 drive-push-pull;
390 slew-rate = <0>;
391 };
392 pins2 {
393 pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
394 bias-disable;
395 };
396 };
Patrice Chotard18cb6f52018-08-10 17:12:11 +0200[diff] [blame]397
398 usbotg_hs_pins_a: usbotg_hs-0 {
399 pins {
400 pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
401 };
402 };
Patrick Delaunay50599142018-07-09 15:17:19 +0200[diff] [blame]403 };
404
405 pinctrl_z: pin-controller-z@54004000 {
406 #address-cells = <1>;
407 #size-cells = <1>;
408 compatible = "st,stm32mp157-z-pinctrl";
409 ranges = <0 0x54004000 0x400>;
410 pins-are-numbered;
411 interrupt-parent = <&exti>;
412 st,syscfg = <&exti 0x60 0xff>;
413
414 gpioz: gpio@54004000 {
415 gpio-controller;
416 #gpio-cells = <2>;
417 interrupt-controller;
418 #interrupt-cells = <2>;
419 reg = <0 0x400>;
420 clocks = <&rcc GPIOZ>;
421 st,bank-name = "GPIOZ";
422 st,bank-ioport = <11>;
423 ngpios = <8>;
424 gpio-ranges = <&pinctrl_z 0 400 8>;
425 };
426
427 i2c4_pins_a: i2c4-0 {
428 pins {
429 pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
430 <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
431 bias-disable;
432 drive-open-drain;
433 slew-rate = <0>;
434 };
435 };
Patrice Chotard00442d02019-02-12 16:50:38 +0100[diff] [blame]436
437 spi1_pins_a: spi1-0 {
438 pins1 {
439 pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
440 <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
441 bias-disable;
442 drive-push-pull;
443 slew-rate = <1>;
444 };
445
446 pins2 {
447 pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
448 bias-disable;
449 };
450 };
Patrick Delaunay50599142018-07-09 15:17:19 +0200[diff] [blame]451 };
452 };
453};