| Dave Liu | 217b990 | 2008-04-15 13:12:23 +0800 | [diff] [blame] | 1 | Freescale MPC837xE-RDB Board |
| Kim Phillips | 1cb07e6 | 2008-01-16 00:38:05 -0600 | [diff] [blame] | 2 | ----------------------------------------- |
| 3 | |
| 4 | 1. Board Description |
| 5 | |
| 6 | The MPC837xE-RDB are reference boards featuring the Freescale MPC8377E, |
| 7 | MPC8378E, and the MPC8379E processors in a Mini-ITX form factor. |
| 8 | |
| 9 | The MPC837xE-RDB's have the following common features: |
| 10 | |
| 11 | A) 256-MBytes on-board DDR2 unbuffered SDRAM |
| 12 | B) 8-Mbytes NOR Flash |
| 13 | C) 32-MBytes NAND Flash |
| 14 | D) 1 Secure Digital High Speed Card (SDHC) Interface |
| 15 | E) 1 Gigabit Ethernet |
| 16 | F) 5-port Ethernet switch (Vitesse 7385) |
| 17 | G) 1 32-bit, 3.3 V, PCI slot |
| 18 | H) 1 32-bit, 3.3 V, Mini-PCI slot |
| 19 | I) 4-port USB 2.0 Hub |
| 20 | J) 1-port OTG USB |
| 21 | K) 2 serial ports (top main console) |
| 22 | L) on board Oscillator: 66M |
| 23 | |
| 24 | The MPC837xE-RDB's have the following differences: |
| 25 | |
| 26 | MPC8377E-RDB MPC8378E-RDB MPC8379E-RDB |
| 27 | SATA controllers 2 0 4 |
| 28 | PCI-Express (mini) 2 2 0 |
| 29 | SGMII Ports 0 2 0 |
| 30 | |
| 31 | |
| 32 | 2. Memory Map |
| 33 | |
| 34 | 2.1. The memory map should look pretty much like this: |
| 35 | |
| 36 | Address Range Device Size Port Size |
| 37 | (Bytes) (Bits) |
| 38 | =========================== ================= ======= ========= |
| 39 | 0x0000_0000 0x0fff_ffff DDR 256M 64 |
| 40 | 0x1000_0000 0x7fff_ffff Empty 1.75G - |
| Dave Liu | 217b990 | 2008-04-15 13:12:23 +0800 | [diff] [blame] | 41 | 0x8000_0000 0x8fff_ffff PCI MEM prefetch 256M 32 |
| 42 | 0x9000_0000 0x9fff_ffff PCI MEM non-prefetch 256M 32 |
| 43 | 0xe030_0000 0xe03f_ffff PCI I/O space 1M 32 |
| Kim Phillips | 1cb07e6 | 2008-01-16 00:38:05 -0600 | [diff] [blame] | 44 | 0xe000_0000 0xe00f_ffff Int Mem Reg Space 1M - |
| Dave Liu | 217b990 | 2008-04-15 13:12:23 +0800 | [diff] [blame] | 45 | 0xe060_0000 0xe060_7fff NAND Flash 32K 8 |
| Kim Phillips | 1cb07e6 | 2008-01-16 00:38:05 -0600 | [diff] [blame] | 46 | 0xfe00_0000 0xfe7f_ffff NOR Flash on CS0 8M 16 |
| 47 | |
| 48 | |
| 49 | 3. Definitions |
| 50 | |
| 51 | 3.1 Explanation of NEW definitions in: |
| 52 | |
| 53 | include/configs/MPC837XERDB.h |
| 54 | |
| 55 | CONFIG_MPC83XX MPC83xx family for both MPC8349 and MPC8360 |
| 56 | CONFIG_MPC837X MPC837x specific |
| Dave Liu | 217b990 | 2008-04-15 13:12:23 +0800 | [diff] [blame] | 57 | CONFIG_MPC837XERDB MPC837xE-RDB board specific |
| Kim Phillips | 1cb07e6 | 2008-01-16 00:38:05 -0600 | [diff] [blame] | 58 | |
| 59 | |
| 60 | 4. Compilation |
| 61 | |
| 62 | Assuming you're using BASH shell: |
| 63 | |
| 64 | export CROSS_COMPILE=your-cross-compile-prefix |
| 65 | cd u-boot |
| 66 | make distclean |
| 67 | make MPC837XERDB_config |
| 68 | make |
| 69 | |
| 70 | |
| 71 | 5. Downloading and Flashing Images |
| 72 | |
| 73 | 5.0 Download over serial line using Kermit: |
| 74 | |
| 75 | loadb $loadaddr |
| 76 | [Drop to kermit: |
| 77 | ^\c |
| 78 | send <u-boot-bin-image> |
| 79 | c |
| 80 | ] |
| 81 | |
| 82 | |
| 83 | Or via tftp: |
| 84 | |
| 85 | tftp $loadaddr u-boot.bin |
| 86 | |
| 87 | 5.1 Reflash U-boot Image using U-boot |
| 88 | |
| 89 | tftp $loadaddr u-boot.bin |
| 90 | protect off fe000000 fe0fffff |
| 91 | erase fe000000 fe0fffff |
| 92 | cp.b $loadaddr fe000000 $filesize |
| 93 | |
| 94 | |
| 95 | 6. Additional Notes: |
| 96 | 1) The console is connected to the top RS-232 connector and the |
| 97 | baudrate for MPC837XE-RDB is 115200bps. |