blob: beb1926c12aaadabab41f173c6f634d226a235f9 [file] [log] [blame]
Frieder Schrempf199dfd92021-09-29 16:42:42 +02001/* SPDX-License-Identifier: GPL-2.0+ */
2/*
3 * Copyright (C) 2019 Kontron Electronics GmbH
4 *
5 * Configuration settings for the Kontron SL/BL i.MX8M-Mini boards and modules (N81xx).
6 */
7#ifndef __KONTRON_MX8MM_CONFIG_H
8#define __KONTRON_MX8MM_CONFIG_H
9
10#include <asm/arch/imx-regs.h>
11#include <linux/sizes.h>
12
13#ifdef CONFIG_SPL_BUILD
14#include <config.h>
15#endif
16
17/* RAM */
18#define PHYS_SDRAM DDR_CSD1_BASE_ADDR
19#define PHYS_SDRAM_SIZE (SZ_4G)
Tom Rinibb4dd962022-11-16 13:10:37 -050020#define CFG_SYS_SDRAM_BASE PHYS_SDRAM
Frieder Schrempf199dfd92021-09-29 16:42:42 +020021
Tom Rini6a5dccc2022-11-16 13:10:41 -050022#define CFG_SYS_INIT_RAM_ADDR 0x40000000
23#define CFG_SYS_INIT_RAM_SIZE 0x200000
Frieder Schrempf199dfd92021-09-29 16:42:42 +020024
Frieder Schrempf199dfd92021-09-29 16:42:42 +020025/* Board and environment settings */
Frieder Schrempf199dfd92021-09-29 16:42:42 +020026
27#ifdef CONFIG_USB_EHCI_HCD
Frieder Schrempf199dfd92021-09-29 16:42:42 +020028#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
29#define CONFIG_MXC_USB_FLAGS 0
Frieder Schrempf199dfd92021-09-29 16:42:42 +020030#endif
31
Sughosh Ganuccb36462022-04-15 11:29:34 +053032/* GUID for capsule updatable firmware image */
33#define KONTRON_SL_MX8MM_FIT_IMAGE_GUID \
34 EFI_GUID(0xd488e45a, 0x4929, 0x4b55, 0x8c, 0x14, \
35 0x86, 0xce, 0xa2, 0xcd, 0x66, 0x29)
36
Frieder Schrempf199dfd92021-09-29 16:42:42 +020037#define BOOT_TARGET_DEVICES(func) \
38 func(MMC, mmc, 1) \
39 func(MMC, mmc, 0) \
40 func(USB, usb, 0) \
41 func(PXE, pxe, na)
42#include <config_distro_bootcmd.h>
43/* Do not try to probe USB net adapters for net boot */
44#undef BOOTENV_RUN_NET_USB_START
45#define BOOTENV_RUN_NET_USB_START
Frieder Schrempf199dfd92021-09-29 16:42:42 +020046
Frieder Schrempf199dfd92021-09-29 16:42:42 +020047#ifdef CONFIG_SPL_BUILD
Frieder Schrempf199dfd92021-09-29 16:42:42 +020048/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
49#define CONFIG_MALLOC_F_ADDR 0x930000
50#endif
51
Frieder Schrempf38d01ee2022-08-24 15:59:09 +020052#define CONFIG_EXTRA_ENV_SETTINGS BOOTENV
Frieder Schrempf199dfd92021-09-29 16:42:42 +020053
54#endif /* __KONTRON_MX8MM_CONFIG_H */