| Anatolij Gustschin | fde0451 | 2012-08-31 01:29:57 +0000 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2012 |
| 3 | * DENX Software Engineering, Anatolij Gustschin <agust@denx.de> |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or |
| 6 | * modify it under the terms of the GNU General Public License as |
| 7 | * published by the Free Software Foundation; either version 2 of |
| 8 | * the License, or (at your option) any later version. |
| 9 | */ |
| 10 | |
| 11 | /* |
| 12 | * Valid values for CONFIG_SYS_TEXT_BASE are: |
| 13 | * 0xFF000000 boot low boot high (standard configuration) |
| 14 | * 0x00100000 boot from RAM (for testing only) |
| 15 | */ |
| 16 | #ifndef CONFIG_SYS_TEXT_BASE |
| 17 | #define CONFIG_SYS_TEXT_BASE 0xff000000 /* Standard: boot low */ |
| 18 | #endif |
| 19 | |
| 20 | /* Board specific flash config */ |
| 21 | #define CONFIG_SYS_FLASH_BASE 0xff000000 |
| 22 | #define CONFIG_SYS_FLASH_SIZE 0x01000000 /* maximum 16MB */ |
| 23 | /* max number of sectors on one chip */ |
| 24 | #define CONFIG_SYS_MAX_FLASH_SECT 128 |
| 25 | |
| 26 | /* |
| 27 | * Include common defines for all ifm boards |
| 28 | */ |
| 29 | #include "o2dnt-common.h" |
| 30 | |
| 31 | /* GPIO configuration */ |
| 32 | #define CONFIG_SYS_GPS_PORT_CONFIG 0x00002004 /* no CAN */ |
| 33 | |
| 34 | /* Other board specific configs */ |
| 35 | #define CONFIG_NETCONSOLE |
| 36 | |
| 37 | #define CONFIG_SYS_BOOTCS_CFG 0x00087801 |
| 38 | #define CONFIG_SYS_RESET_ADDRESS 0xff000000 |
| 39 | |
| 40 | #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ |
| 41 | #define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 - 63 MB in DRAM */ |
| 42 | |
| 43 | #define CONFIG_BOARD_NAME "o2mnt" |
| 44 | #define CONFIG_BOARD_BOOTCMD "${newcmd}" |
| 45 | #define CONFIG_BOARD_MEM_LIMIT xstr(62) |
| 46 | #define BOARD_POST_CRC32_END xstr(0x01000000) |
| 47 | |
| 48 | #ifndef CONFIG_IFM_SENSOR_TYPE |
| 49 | #define CONFIG_IFM_SENSOR_TYPE "O2M110" |
| 50 | #endif |
| 51 | |
| 52 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| 53 | CONFIG_IFM_DEFAULT_ENV_SETTINGS \ |
| 54 | CONFIG_IFM_DEFAULT_ENV_OLD \ |
| 55 | CONFIG_IFM_DEFAULT_ENV_NEW \ |
| 56 | "linbot=ff060000\0" \ |
| 57 | "lintop=ff25ffff\0" \ |
| 58 | "rambot=ff260000\0" \ |
| 59 | "ramtop=ffc5ffff\0" \ |
| 60 | "jffbot=ffc60000\0" \ |
| 61 | "jfftop=ffffffff\0" \ |
| 62 | "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \ |
| 63 | "ubotop=ff03ffff\0" \ |
| 64 | "kernel_addr=0xff060000\0" \ |
| 65 | "ramdisk_addr=0xff260000\0" \ |
| 66 | "newcmd=run scrprot;run flash_ext2\0" \ |
| 67 | "scrprot=protect on ${linbot} ${lintop};protect on ${rambot} " \ |
| 68 | "${ramtop}\0" \ |
| 69 | "flash_ext2=run ext2args addip addmem;bootm ${kernel_addr}\0" \ |
| 70 | "ext2args=setenv bootargs root=/dev/mtdblock3 ro " \ |
| 71 | "rootfstype=ext2\0" \ |
| 72 | "pwm=mw f0000674 0x10006;mw f0000678 0x30000;" \ |
| 73 | "mw f0000678 0x30001;mw f0000670 0x3\0" \ |
| 74 | "master=mw f0000b00 0x00052006;mw f0000b0c $(IOpin);" \ |
| 75 | "mw f0000b04 $(IOpin);mw f0000b10 0x24;run pwm\0" \ |
| 76 | "sensortyp="CONFIG_IFM_SENSOR_TYPE"\0" \ |
| 77 | "srelease=0.00\0" |