blob: 1b440eaf0f823fc61478cc41554247f71fcfb8c9 [file] [log] [blame]
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +02001/*
2 * Board configuration file for Dragonboard 410C
3 *
4 * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9#ifndef __CONFIGS_DRAGONBOARD410C_H
10#define __CONFIGS_DRAGONBOARD410C_H
11
12#include <linux/sizes.h>
13#include <asm/arch/sysmap-apq8016.h>
14
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +020015#define CONFIG_MISC_INIT_R /* To stop autoboot */
16
17/* Physical Memory Map */
18#define CONFIG_NR_DRAM_BANKS 1
19#define PHYS_SDRAM_1 0x80000000
20/* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/
21#define PHYS_SDRAM_1_SIZE 0x3da00000
22#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
23#define CONFIG_SYS_TEXT_BASE 0x80080000
24#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
25#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)
26#define CONFIG_SYS_BOOTM_LEN 0x1000000 /* 16MB max kernel size */
27
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +020028/* UART */
29#define CONFIG_BAUDRATE 115200
30
31/* Generic Timer Definitions */
32#define COUNTER_FREQUENCY 19000000
33
34/* This are needed to have proper mmc support */
35#define CONFIG_MMC
36#define CONFIG_GENERIC_MMC
37#define CONFIG_SDHCI
38
39#define CONFIG_SYS_LDSCRIPT "board/qualcomm/dragonboard410c/u-boot.lds"
40
41/* Fixup - in init code we switch from device to host mode,
42 * it has to be done after each HCD reset */
43#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
44
45#define CONFIG_USB_HOST_ETHER /* Enable USB Networking */
46
47/* Support all possible USB ethernet dongles */
48#define CONFIG_USB_ETHER_DM9601
49#define CONFIG_USB_ETHER_ASIX
50#define CONFIG_USB_ETHER_ASIX88179
51#define CONFIG_USB_ETHER_MCS7830
52#define CONFIG_USB_ETHER_SMSC95XX
53
54/* Libraries */
55#define CONFIG_MD5
56
57/* Extra Commands */
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +020058#define CONFIG_CMD_ENV
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +020059#define CONFIG_CMD_GPT
60#define CONFIG_CMD_MD5SUM
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +020061/* Enable that for switching of boot partitions */
62/* Disabled by default as some sub-commands can brick eMMC */
63/*#define CONFIG_SUPPORT_EMMC_BOOT */
64#define CONFIG_CMD_PART
65#define CONFIG_CMD_REGINFO /* Register dump */
66#define CONFIG_CMD_TFTP
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +020067#define CONFIG_CMD_UNZIP
68
69/* Partition table support */
70#define HAVE_BLOCK_DEVICE /* Needed for partition commands */
71#define CONFIG_PARTITION_UUIDS
72
73#include <config_distro_defaults.h>
74
75/* BOOTP options */
76#define CONFIG_BOOTP_BOOTFILESIZE
77
78/* Environment - Boot*/
79#define CONFIG_BOOTARGS "console=ttyMSM0,115200n8"
80
81#define BOOT_TARGET_DEVICES(func) \
82 func(USB, usb, 0) \
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +020083 func(MMC, mmc, 1) \
Ricardo Salveti de Araujo1ff62292016-07-03 13:59:01 -030084 func(MMC, mmc, 0) \
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +020085 func(DHCP, dhcp, na)
86
87#include <config_distro_bootcmd.h>
88
89/* Does what recovery does */
90#define REFLASH(file, part) \
91"part start mmc 0 "#part" start && "\
92"part size mmc 0 "#part" size && "\
93"tftp $loadaddr "#file" && " \
94"mmc write $loadaddr $start $size && "
95
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +020096#define CONFIG_ENV_REFLASH \
97"mmc dev 0 && "\
98"usb start && "\
99"dhcp && "\
100"tftp $loadaddr dragonboard/rescue/gpt_both0.bin && "\
101"mmc write $loadaddr 0 43 && " \
102"mmc rescan && "\
103REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)\
104REFLASH(dragonboard/rescue/sbl1.mbn, 2)\
105REFLASH(dragonboard/rescue/rpm.mbn, 3)\
106REFLASH(dragonboard/rescue/tz.mbn, 4)\
107REFLASH(dragonboard/rescue/hyp.mbn, 5)\
108REFLASH(dragonboard/rescue/sec.dat, 6)\
109REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)\
110REFLASH(dragonboard/u-boot.img, 8)\
111"usb stop &&"\
112"echo Reflash completed"
113
114/* Environment */
115#define CONFIG_EXTRA_ENV_SETTINGS \
116 "reflash="CONFIG_ENV_REFLASH"\0"\
117 "loadaddr=0x81000000\0" \
118 "fdt_high=0xffffffffffffffff\0" \
119 "initrd_high=0xffffffffffffffff\0" \
120 "linux_image=Image\0" \
Andreas Färberce302982016-04-13 14:16:22 +0200121 "kernel_addr_r=0x81000000\0"\
122 "fdtfile=apq8016-sbc.dtb\0" \
123 "fdt_addr_r=0x83000000\0"\
124 "ramdisk_addr_r=0x84000000\0"\
Ricardo Salveti de Araujo88044532016-07-03 14:16:03 -0300125 "scriptaddr=0x90000000\0"\
126 "pxefile_addr_r=0x90100000\0"\
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +0200127 BOOTENV
128
129#define CONFIG_ENV_IS_NOWHERE
Mateusz Kulikowskie92c4462016-06-19 23:05:32 +0200130#define CONFIG_ENV_SIZE 0x2000
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +0200131#define CONFIG_ENV_VARS_UBOOT_CONFIG
132#define CONFIG_SYS_NO_FLASH
133
134/* Size of malloc() pool */
135#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M)
136
137/* Monitor Command Prompt */
138#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
139#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
140 sizeof(CONFIG_SYS_PROMPT) + 16)
141#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
142#define CONFIG_SYS_MAXARGS 64 /* max command args */
143
144#endif