Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 7a1bd39dff0ef65f3f4812fa15bfee517d5a47e5 / . / dts / upstream / Bindings / pinctrl / mediatek,mt8188-pinctrl.yaml
blob: e994b0c70dbfd26da2ac6ae3b86c9613bb1baed2 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8188-pinctrl.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: MediaTek MT8188 Pin Controller
8
9maintainers:
10 - Hui Liu <hui.liu@mediatek.com>
11
12description:
13 The MediaTek's MT8188 Pin controller is used to control SoC pins.
14
15properties:
16 compatible:
17 const: mediatek,mt8188-pinctrl
18
19 gpio-controller: true
20
21 '#gpio-cells':
22 description:
23 Number of cells in GPIO specifier, should be two. The first cell is the
24 pin number, the second cell is used to specify optional parameters which
25 are defined in <dt-bindings/gpio/gpio.h>.
26 const: 2
27
28 gpio-ranges:
29 maxItems: 1
30
31 gpio-line-names: true
32
33 reg:
34 items:
35 - description: gpio registers base address
36 - description: rm group io configuration registers base address
37 - description: lt group io configuration registers base address
38 - description: lm group io configuration registers base address
39 - description: rt group io configuration registers base address
40 - description: eint registers base address
41
42 reg-names:
43 items:
44 - const: iocfg0
45 - const: iocfg_rm
46 - const: iocfg_lt
47 - const: iocfg_lm
48 - const: iocfg_rt
49 - const: eint
50
51 interrupt-controller: true
52
53 '#interrupt-cells':
54 const: 2
55
56 interrupts:
57 description: The interrupt outputs to sysirq.
58 maxItems: 1
59
60 mediatek,rsel-resistance-in-si-unit:
61 type: boolean
62 description:
63 We provide two methods to select the resistance for I2C when pull up or
64 pull down. The first is by RSEL definition value, another one is by
65 resistance value(ohm). This flag is used to identify if the method is
66 resistance(si unit) value.
67
68# PIN CONFIGURATION NODES
69patternProperties:
70 '-pins$':
71 type: object
72 additionalProperties: false
73
74 patternProperties:
75 '^pins':
76 type: object
77 $ref: /schemas/pinctrl/pincfg-node.yaml
78 additionalProperties: false
79 description:
80 A pinctrl node should contain at least one subnode representing the
81 pinctrl groups available on the machine. Each subnode will list the
82 pins it needs, and how they should be configured, with regard to muxer
83 configuration, pullups, drive strength, input enable/disable and input
84 schmitt.
85
86 properties:
87 pinmux:
88 description:
89 Integer array, represents gpio pin number and mux setting.
90 Supported pin number and mux varies for different SoCs, and are
91 defined as macros in dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h
92 directly, for this SoC.
93
94 drive-strength:
95 enum: [2, 4, 6, 8, 10, 12, 14, 16]
96
97 drive-strength-microamp:
98 enum: [125, 250, 500, 1000]
99
100 bias-pull-down:
101 oneOf:
102 - type: boolean
103 - enum: [100, 101, 102, 103]
104 description: mt8188 pull down PUPD/R0/R1 type define value.
105 - enum: [200, 201, 202, 203, 204, 205, 206, 207]
106 description: mt8188 pull down RSEL type define value.
107 - enum: [75000, 5000]
108 description: mt8188 pull down RSEL type si unit value(ohm).
109 description: |
110 For pull down type is normal, it doesn't need add RSEL & R1R0
111 define and resistance value.
112 For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
113 set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
114 "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
115 "MTK_PUPD_SET_R1R0_11" define in mt8188.
116 For pull down type is RSEL, it can add RSEL define & resistance
117 value(ohm) to set different resistance by identifying property
118 "mediatek,rsel-resistance-in-si-unit". It can support
119 "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" &
120 "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
121 "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" &
122 "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" define in
123 mt8188. It can also support resistance value(ohm) "75000" & "5000"
124 in mt8188.
125
126 bias-pull-up:
127 oneOf:
128 - type: boolean
129 - enum: [100, 101, 102, 103]
130 description: mt8188 pull up PUPD/R0/R1 type define value.
131 - enum: [200, 201, 202, 203, 204, 205, 206, 207]
132 description: mt8188 pull up RSEL type define value.
133 - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
134 description: mt8188 pull up RSEL type si unit value(ohm).
135 description: |
136 For pull up type is normal, it don't need add RSEL & R1R0 define
137 and resistance value.
138 For pull up type is PUPD/R0/R1 type, it can add R1R0 define to set
139 different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
140 "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
141 "MTK_PUPD_SET_R1R0_11" define in mt8188.
142 For pull up type is RSEL, it can add RSEL define & resistance
143 value(ohm) to set different resistance by identifying property
144 "mediatek,rsel-resistance-in-si-unit". It can support
145 "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" &
146 "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
147 "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" &
148 "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" define in
149 mt8188. It can also support resistance value(ohm) "1000" & "1500"
150 & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8188.
151
152 bias-disable: true
153
154 output-high: true
155
156 output-low: true
157
158 input-enable: true
159
160 input-disable: true
161
162 input-schmitt-enable: true
163
164 input-schmitt-disable: true
165
166 required:
167 - pinmux
168
169required:
170 - compatible
171 - reg
172 - interrupts
173 - interrupt-controller
174 - '#interrupt-cells'
175 - gpio-controller
176 - '#gpio-cells'
177 - gpio-ranges
178
179additionalProperties: false
180
181examples:
182 - |
183 #include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
184 #include <dt-bindings/interrupt-controller/arm-gic.h>
185
186 pio: pinctrl@10005000 {
187 compatible = "mediatek,mt8188-pinctrl";
188 reg = <0x10005000 0x1000>,
189 <0x11c00000 0x1000>,
190 <0x11e10000 0x1000>,
191 <0x11e20000 0x1000>,
192 <0x11ea0000 0x1000>,
193 <0x1000b000 0x1000>;
194 reg-names = "iocfg0", "iocfg_rm",
195 "iocfg_lt", "iocfg_lm", "iocfg_rt",
196 "eint";
197 gpio-controller;
198 #gpio-cells = <2>;
199 gpio-ranges = <&pio 0 0 176>;
200 interrupt-controller;
201 interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>;
202 #interrupt-cells = <2>;
203
204 pio-pins {
205 pins {
206 pinmux = <PINMUX_GPIO0__FUNC_B_GPIO0>;
207 output-low;
208 };
209 };
210
211 spi0-pins {
212 pins-spi {
213 pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
214 <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
215 <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>;
216 drive-strength = <6>;
217 };
218 pins-spi-mi {
219 pinmux = <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
220 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
221 };
222 };
223
224 i2c0-pins {
225 pins {
226 pinmux = <PINMUX_GPIO55__FUNC_B1_SCL0>,
227 <PINMUX_GPIO56__FUNC_B1_SDA0>;
228 bias-disable;
229 drive-strength-microamp = <1000>;
230 };
231 };
232 };