| Shaohui Xie | 0464326 | 2015-10-26 19:47:54 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2015 Freescale Semiconductor, Inc. |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 5 | */ |
| 6 | #include <common.h> |
| 7 | #include <asm/io.h> |
| 8 | #include <netdev.h> |
| 9 | #include <fm_eth.h> |
| 10 | #include <fsl_dtsec.h> |
| 11 | #include <fsl_mdio.h> |
| 12 | #include <malloc.h> |
| 13 | |
| 14 | #include "../common/fman.h" |
| 15 | |
| 16 | int board_eth_init(bd_t *bis) |
| 17 | { |
| 18 | #ifdef CONFIG_FMAN_ENET |
| 19 | int i; |
| 20 | struct memac_mdio_info dtsec_mdio_info; |
| 21 | struct memac_mdio_info tgec_mdio_info; |
| 22 | struct mii_dev *dev; |
| 23 | u32 srds_s1; |
| 24 | struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); |
| 25 | |
| 26 | srds_s1 = in_be32(&gur->rcwsr[4]) & |
| 27 | FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK; |
| 28 | srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT; |
| 29 | |
| 30 | dtsec_mdio_info.regs = |
| 31 | (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR; |
| 32 | |
| 33 | dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; |
| 34 | |
| 35 | /* Register the 1G MDIO bus */ |
| 36 | fm_memac_mdio_init(bis, &dtsec_mdio_info); |
| 37 | |
| 38 | tgec_mdio_info.regs = |
| 39 | (struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR; |
| 40 | tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; |
| 41 | |
| 42 | /* Register the 10G MDIO bus */ |
| 43 | fm_memac_mdio_init(bis, &tgec_mdio_info); |
| 44 | |
| 45 | /* Set the two on-board RGMII PHY address */ |
| 46 | fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR); |
| 47 | fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR); |
| 48 | |
| 49 | /* QSGMII on lane B, MAC 1/2/5/6 */ |
| 50 | fm_info_set_phy_address(FM1_DTSEC1, QSGMII_PORT1_PHY_ADDR); |
| 51 | fm_info_set_phy_address(FM1_DTSEC2, QSGMII_PORT2_PHY_ADDR); |
| 52 | fm_info_set_phy_address(FM1_DTSEC5, QSGMII_PORT3_PHY_ADDR); |
| 53 | fm_info_set_phy_address(FM1_DTSEC6, QSGMII_PORT4_PHY_ADDR); |
| 54 | |
| 55 | switch (srds_s1) { |
| 56 | case 0x1455: |
| 57 | break; |
| 58 | default: |
| 59 | printf("Invalid SerDes protocol 0x%x for LS1043ARDB\n", |
| 60 | srds_s1); |
| 61 | break; |
| 62 | } |
| 63 | |
| 64 | dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); |
| 65 | for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) |
| 66 | fm_info_set_mdio(i, dev); |
| 67 | |
| 68 | /* XFI on lane A, MAC 9 */ |
| 69 | fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); |
| 70 | dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME); |
| 71 | fm_info_set_mdio(FM1_10GEC1, dev); |
| 72 | |
| 73 | cpu_eth_init(bis); |
| 74 | #endif |
| 75 | |
| 76 | return pci_eth_init(bis); |
| 77 | } |