Samuel Holland | 8de2c0c | 2023-01-21 17:13:05 -0600 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause |
| 2 | /* |
| 3 | * Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved. |
| 4 | * Copyright (c) 2018-2023 Samuel Holland <samuel@sholland.org> |
| 5 | */ |
| 6 | |
| 7 | #include <axp_pmic.h> |
| 8 | #include <dm.h> |
| 9 | #include <errno.h> |
| 10 | #include <dm/device-internal.h> |
| 11 | #include <power/pmic.h> |
| 12 | #include <power/regulator.h> |
| 13 | |
| 14 | #define NA 0xff |
| 15 | |
| 16 | struct axp_regulator_plat { |
| 17 | const char *name; |
| 18 | u8 enable_reg; |
| 19 | u8 enable_mask; |
| 20 | u8 volt_reg; |
| 21 | u8 volt_mask; |
| 22 | u16 min_mV; |
| 23 | u16 max_mV; |
| 24 | u8 step_mV; |
| 25 | u8 split; |
| 26 | const u16 *table; |
| 27 | }; |
| 28 | |
| 29 | static int axp_regulator_get_value(struct udevice *dev) |
| 30 | { |
| 31 | const struct axp_regulator_plat *plat = dev_get_plat(dev); |
| 32 | int mV, sel; |
| 33 | |
| 34 | if (plat->volt_reg == NA) |
| 35 | return -EINVAL; |
| 36 | |
| 37 | sel = pmic_reg_read(dev->parent, plat->volt_reg); |
| 38 | if (sel < 0) |
| 39 | return sel; |
| 40 | |
| 41 | sel &= plat->volt_mask; |
| 42 | sel >>= ffs(plat->volt_mask) - 1; |
| 43 | |
| 44 | if (plat->table) { |
| 45 | mV = plat->table[sel]; |
| 46 | } else { |
| 47 | if (sel > plat->split) |
| 48 | sel = plat->split + (sel - plat->split) * 2; |
| 49 | mV = plat->min_mV + sel * plat->step_mV; |
| 50 | } |
| 51 | |
| 52 | return mV * 1000; |
| 53 | } |
| 54 | |
| 55 | static int axp_regulator_set_value(struct udevice *dev, int uV) |
| 56 | { |
| 57 | const struct axp_regulator_plat *plat = dev_get_plat(dev); |
| 58 | int mV = uV / 1000; |
| 59 | uint sel, shift; |
| 60 | |
| 61 | if (plat->volt_reg == NA) |
| 62 | return -EINVAL; |
| 63 | if (mV < plat->min_mV || mV > plat->max_mV) |
| 64 | return -EINVAL; |
| 65 | |
| 66 | shift = ffs(plat->volt_mask) - 1; |
| 67 | |
| 68 | if (plat->table) { |
| 69 | /* |
| 70 | * The table must be monotonically increasing and |
| 71 | * have an entry for each possible field value. |
| 72 | */ |
| 73 | sel = plat->volt_mask >> shift; |
| 74 | while (sel && plat->table[sel] > mV) |
| 75 | sel--; |
| 76 | } else { |
| 77 | sel = (mV - plat->min_mV) / plat->step_mV; |
| 78 | if (sel > plat->split) |
| 79 | sel = plat->split + (sel - plat->split) / 2; |
| 80 | } |
| 81 | |
| 82 | return pmic_clrsetbits(dev->parent, plat->volt_reg, |
| 83 | plat->volt_mask, sel << shift); |
| 84 | } |
| 85 | |
| 86 | static int axp_regulator_get_enable(struct udevice *dev) |
| 87 | { |
| 88 | const struct axp_regulator_plat *plat = dev_get_plat(dev); |
| 89 | int reg; |
| 90 | |
| 91 | reg = pmic_reg_read(dev->parent, plat->enable_reg); |
| 92 | if (reg < 0) |
| 93 | return reg; |
| 94 | |
| 95 | return (reg & plat->enable_mask) == plat->enable_mask; |
| 96 | } |
| 97 | |
| 98 | static int axp_regulator_set_enable(struct udevice *dev, bool enable) |
| 99 | { |
| 100 | const struct axp_regulator_plat *plat = dev_get_plat(dev); |
| 101 | |
| 102 | return pmic_clrsetbits(dev->parent, plat->enable_reg, |
| 103 | plat->enable_mask, |
| 104 | enable ? plat->enable_mask : 0); |
| 105 | } |
| 106 | |
| 107 | static const struct dm_regulator_ops axp_regulator_ops = { |
| 108 | .get_value = axp_regulator_get_value, |
| 109 | .set_value = axp_regulator_set_value, |
| 110 | .get_enable = axp_regulator_get_enable, |
| 111 | .set_enable = axp_regulator_set_enable, |
| 112 | }; |
| 113 | |
| 114 | static const u16 axp152_dcdc1_table[] = { |
| 115 | 1700, 1800, 1900, 2000, 2100, 2400, 2500, 2600, |
| 116 | 2700, 2800, 3000, 3100, 3200, 3300, 3400, 3500, |
| 117 | }; |
| 118 | |
| 119 | static const u16 axp152_aldo12_table[] = { |
| 120 | 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900, |
| 121 | 2000, 2500, 2700, 2800, 3000, 3100, 3200, 3300, |
| 122 | }; |
| 123 | |
| 124 | static const u16 axp152_ldo0_table[] = { |
| 125 | 5000, 3300, 2800, 2500, |
| 126 | }; |
| 127 | |
| 128 | static const struct axp_regulator_plat axp152_regulators[] = { |
| 129 | { "dcdc1", 0x12, BIT(7), 0x26, 0x0f, .table = axp152_dcdc1_table }, |
| 130 | { "dcdc2", 0x12, BIT(6), 0x23, 0x3f, 700, 2275, 25, NA }, |
| 131 | { "dcdc3", 0x12, BIT(5), 0x27, 0x3f, 700, 3500, 50, NA }, |
| 132 | { "dcdc4", 0x12, BIT(4), 0x2b, 0x7f, 700, 3500, 25, NA }, |
| 133 | { "aldo1", 0x12, BIT(3), 0x28, 0xf0, .table = axp152_aldo12_table }, |
| 134 | { "aldo2", 0x12, BIT(2), 0x28, 0x0f, .table = axp152_aldo12_table }, |
| 135 | { "dldo1", 0x12, BIT(1), 0x29, 0x1f, 700, 3500, 100, NA }, |
| 136 | { "dldo2", 0x12, BIT(0), 0x2a, 0x1f, 700, 3500, 100, NA }, |
| 137 | { "ldo0", 0x15, BIT(7), 0x15, 0x30, .table = axp152_ldo0_table }, |
| 138 | { } |
| 139 | }; |
| 140 | |
| 141 | static const u16 axp20x_ldo4_table[] = { |
| 142 | 1250, 1300, 1400, 1500, 1600, 1700, 1800, 1900, |
| 143 | 2000, 2500, 2700, 2800, 3000, 3100, 3200, 3300, |
| 144 | }; |
| 145 | |
| 146 | static const struct axp_regulator_plat axp20x_regulators[] = { |
| 147 | { "dcdc2", 0x12, BIT(4), 0x23, 0x3f, 700, 2275, 25, NA }, |
| 148 | { "dcdc3", 0x12, BIT(1), 0x27, 0x7f, 700, 3500, 25, NA }, |
| 149 | { "ldo2", 0x12, BIT(2), 0x28, 0xf0, 1800, 3300, 100, NA }, |
| 150 | { "ldo3", 0x12, BIT(6), 0x29, 0x7f, 700, 2275, 25, NA }, |
| 151 | { "ldo4", 0x12, BIT(3), 0x28, 0x0f, .table = axp20x_ldo4_table }, |
| 152 | { } |
| 153 | }; |
| 154 | |
| 155 | static const struct axp_regulator_plat axp22x_regulators[] = { |
| 156 | {"dc5ldo", 0x10, BIT(0), 0x1c, 0x07, 700, 1400, 100, NA }, |
| 157 | { "dcdc1", 0x10, BIT(1), 0x21, 0x1f, 1600, 3400, 100, NA }, |
| 158 | { "dcdc2", 0x10, BIT(2), 0x22, 0x3f, 600, 1540, 20, NA }, |
| 159 | { "dcdc3", 0x10, BIT(3), 0x23, 0x3f, 600, 1860, 20, NA }, |
| 160 | { "dcdc4", 0x10, BIT(4), 0x24, 0x3f, 600, 1540, 20, NA }, |
| 161 | { "dcdc5", 0x10, BIT(5), 0x25, 0x1f, 1000, 2550, 50, NA }, |
| 162 | { "aldo1", 0x10, BIT(6), 0x28, 0x1f, 700, 3300, 100, NA }, |
| 163 | { "aldo2", 0x10, BIT(7), 0x29, 0x1f, 700, 3300, 100, NA }, |
| 164 | { "aldo3", 0x13, BIT(7), 0x2a, 0x1f, 700, 3300, 100, NA }, |
| 165 | { "dldo1", 0x12, BIT(3), 0x15, 0x1f, 700, 3300, 100, NA }, |
| 166 | { "dldo2", 0x12, BIT(4), 0x16, 0x1f, 700, 3300, 100, NA }, |
| 167 | { "dldo3", 0x12, BIT(5), 0x17, 0x1f, 700, 3300, 100, NA }, |
| 168 | { "dldo4", 0x12, BIT(6), 0x18, 0x1f, 700, 3300, 100, NA }, |
| 169 | { "eldo1", 0x12, BIT(0), 0x19, 0x1f, 700, 3300, 100, NA }, |
| 170 | { "eldo2", 0x12, BIT(1), 0x1a, 0x1f, 700, 3300, 100, NA }, |
| 171 | { "eldo3", 0x12, BIT(2), 0x1b, 0x1f, 700, 3300, 100, NA }, |
| 172 | { "dc1sw", 0x12, BIT(7), NA, NA, NA, NA, NA, NA }, |
| 173 | { } |
| 174 | }; |
| 175 | |
| 176 | static const struct axp_regulator_plat axp803_regulators[] = { |
| 177 | { "dcdc1", 0x10, BIT(0), 0x20, 0x1f, 1600, 3400, 100, NA }, |
| 178 | { "dcdc2", 0x10, BIT(1), 0x21, 0x7f, 500, 1300, 10, 70 }, |
| 179 | { "dcdc3", 0x10, BIT(2), 0x22, 0x7f, 500, 1300, 10, 70 }, |
| 180 | { "dcdc4", 0x10, BIT(3), 0x23, 0x7f, 500, 1300, 10, 70 }, |
| 181 | { "dcdc5", 0x10, BIT(4), 0x24, 0x7f, 800, 1840, 10, 32 }, |
| 182 | { "dcdc6", 0x10, BIT(5), 0x25, 0x7f, 600, 1520, 10, 50 }, |
| 183 | { "aldo1", 0x13, BIT(5), 0x28, 0x1f, 700, 3300, 100, NA }, |
| 184 | { "aldo2", 0x13, BIT(6), 0x29, 0x1f, 700, 3300, 100, NA }, |
| 185 | { "aldo3", 0x13, BIT(7), 0x2a, 0x1f, 700, 3300, 100, NA }, |
| 186 | { "dldo1", 0x12, BIT(3), 0x15, 0x1f, 700, 3300, 100, NA }, |
| 187 | { "dldo2", 0x12, BIT(4), 0x16, 0x1f, 700, 4200, 100, 27 }, |
| 188 | { "dldo3", 0x12, BIT(5), 0x17, 0x1f, 700, 3300, 100, NA }, |
| 189 | { "dldo4", 0x12, BIT(6), 0x18, 0x1f, 700, 3300, 100, NA }, |
| 190 | { "eldo1", 0x12, BIT(0), 0x19, 0x1f, 700, 1900, 50, NA }, |
| 191 | { "eldo2", 0x12, BIT(1), 0x1a, 0x1f, 700, 1900, 50, NA }, |
| 192 | { "eldo3", 0x12, BIT(2), 0x1b, 0x1f, 700, 1900, 50, NA }, |
| 193 | { "fldo1", 0x13, BIT(2), 0x1c, 0x0f, 700, 1450, 50, NA }, |
| 194 | { "fldo2", 0x13, BIT(3), 0x1d, 0x0f, 700, 1450, 50, NA }, |
| 195 | { "dc1sw", 0x12, BIT(7), NA, NA, NA, NA, NA, NA }, |
| 196 | { } |
| 197 | }; |
| 198 | |
| 199 | /* |
| 200 | * The "dcdcd" split changes the step size by a factor of 5, not 2; |
| 201 | * disallow values above the split to maintain accuracy. |
| 202 | */ |
| 203 | static const struct axp_regulator_plat axp806_regulators[] = { |
| 204 | { "dcdca", 0x10, BIT(0), 0x12, 0x7f, 600, 1520, 10, 50 }, |
| 205 | { "dcdcb", 0x10, BIT(1), 0x13, 0x1f, 1000, 2550, 50, NA }, |
| 206 | { "dcdcc", 0x10, BIT(2), 0x14, 0x7f, 600, 1520, 10, 50 }, |
| 207 | { "dcdcd", 0x10, BIT(3), 0x15, 0x3f, 600, 1500, 20, NA }, |
| 208 | { "dcdce", 0x10, BIT(4), 0x16, 0x1f, 1100, 3400, 100, NA }, |
| 209 | { "aldo1", 0x10, BIT(5), 0x17, 0x1f, 700, 3300, 100, NA }, |
| 210 | { "aldo2", 0x10, BIT(6), 0x18, 0x1f, 700, 3300, 100, NA }, |
| 211 | { "aldo3", 0x10, BIT(7), 0x19, 0x1f, 700, 3300, 100, NA }, |
| 212 | { "bldo1", 0x11, BIT(0), 0x20, 0x0f, 700, 1900, 100, NA }, |
| 213 | { "bldo2", 0x11, BIT(1), 0x21, 0x0f, 700, 1900, 100, NA }, |
| 214 | { "bldo3", 0x11, BIT(2), 0x22, 0x0f, 700, 1900, 100, NA }, |
| 215 | { "bldo4", 0x11, BIT(3), 0x23, 0x0f, 700, 1900, 100, NA }, |
| 216 | { "cldo1", 0x11, BIT(4), 0x24, 0x1f, 700, 3300, 100, NA }, |
| 217 | { "cldo2", 0x11, BIT(5), 0x25, 0x1f, 700, 4200, 100, 27 }, |
| 218 | { "cldo3", 0x11, BIT(6), 0x26, 0x1f, 700, 3300, 100, NA }, |
| 219 | { "sw", 0x11, BIT(7), NA, NA, NA, NA, NA, NA }, |
| 220 | { } |
| 221 | }; |
| 222 | |
| 223 | /* |
| 224 | * The "dcdc4" split changes the step size by a factor of 5, not 2; |
| 225 | * disallow values above the split to maintain accuracy. |
| 226 | */ |
| 227 | static const struct axp_regulator_plat axp809_regulators[] = { |
| 228 | {"dc5ldo", 0x10, BIT(0), 0x1c, 0x07, 700, 1400, 100, NA }, |
| 229 | { "dcdc1", 0x10, BIT(1), 0x21, 0x1f, 1600, 3400, 100, NA }, |
| 230 | { "dcdc2", 0x10, BIT(2), 0x22, 0x3f, 600, 1540, 20, NA }, |
| 231 | { "dcdc3", 0x10, BIT(3), 0x23, 0x3f, 600, 1860, 20, NA }, |
| 232 | { "dcdc4", 0x10, BIT(4), 0x24, 0x3f, 600, 1540, 20, NA }, |
| 233 | { "dcdc5", 0x10, BIT(5), 0x25, 0x1f, 1000, 2550, 50, NA }, |
| 234 | { "aldo1", 0x10, BIT(6), 0x28, 0x1f, 700, 3300, 100, NA }, |
| 235 | { "aldo2", 0x10, BIT(7), 0x29, 0x1f, 700, 3300, 100, NA }, |
| 236 | { "aldo3", 0x12, BIT(5), 0x2a, 0x1f, 700, 3300, 100, NA }, |
| 237 | { "dldo1", 0x12, BIT(3), 0x15, 0x1f, 700, 3300, 100, NA }, |
| 238 | { "dldo2", 0x12, BIT(4), 0x16, 0x1f, 700, 3300, 100, NA }, |
| 239 | { "eldo1", 0x12, BIT(0), 0x19, 0x1f, 700, 3300, 100, NA }, |
| 240 | { "eldo2", 0x12, BIT(1), 0x1a, 0x1f, 700, 3300, 100, NA }, |
| 241 | { "eldo3", 0x12, BIT(2), 0x1b, 0x1f, 700, 3300, 100, NA }, |
| 242 | { "sw", 0x12, BIT(6), NA, NA, NA, NA, NA, NA }, |
| 243 | { "dc1sw", 0x12, BIT(7), NA, NA, NA, NA, NA, NA }, |
| 244 | { } |
| 245 | }; |
| 246 | |
| 247 | static const struct axp_regulator_plat axp813_regulators[] = { |
| 248 | { "dcdc1", 0x10, BIT(0), 0x20, 0x1f, 1600, 3400, 100, NA }, |
| 249 | { "dcdc2", 0x10, BIT(1), 0x21, 0x7f, 500, 1300, 10, 70 }, |
| 250 | { "dcdc3", 0x10, BIT(2), 0x22, 0x7f, 500, 1300, 10, 70 }, |
| 251 | { "dcdc4", 0x10, BIT(3), 0x23, 0x7f, 500, 1300, 10, 70 }, |
| 252 | { "dcdc5", 0x10, BIT(4), 0x24, 0x7f, 800, 1840, 10, 32 }, |
| 253 | { "dcdc6", 0x10, BIT(5), 0x25, 0x7f, 600, 1520, 10, 50 }, |
| 254 | { "dcdc7", 0x10, BIT(6), 0x26, 0x7f, 600, 1520, 10, 50 }, |
| 255 | { "aldo1", 0x13, BIT(5), 0x28, 0x1f, 700, 3300, 100, NA }, |
| 256 | { "aldo2", 0x13, BIT(6), 0x29, 0x1f, 700, 3300, 100, NA }, |
| 257 | { "aldo3", 0x13, BIT(7), 0x2a, 0x1f, 700, 3300, 100, NA }, |
| 258 | { "dldo1", 0x12, BIT(3), 0x15, 0x1f, 700, 3300, 100, NA }, |
| 259 | { "dldo2", 0x12, BIT(4), 0x16, 0x1f, 700, 4200, 100, 27 }, |
| 260 | { "dldo3", 0x12, BIT(5), 0x17, 0x1f, 700, 3300, 100, NA }, |
| 261 | { "dldo4", 0x12, BIT(6), 0x18, 0x1f, 700, 3300, 100, NA }, |
| 262 | { "eldo1", 0x12, BIT(0), 0x19, 0x1f, 700, 1900, 50, NA }, |
| 263 | { "eldo2", 0x12, BIT(1), 0x1a, 0x1f, 700, 1900, 50, NA }, |
| 264 | { "eldo3", 0x12, BIT(2), 0x1b, 0x1f, 700, 1900, 50, NA }, |
| 265 | { "fldo1", 0x13, BIT(2), 0x1c, 0x0f, 700, 1450, 50, NA }, |
| 266 | { "fldo2", 0x13, BIT(3), 0x1d, 0x0f, 700, 1450, 50, NA }, |
| 267 | { "fldo3", 0x13, BIT(4), NA, NA, NA, NA, NA, NA }, |
| 268 | { } |
| 269 | }; |
| 270 | |
| 271 | static const struct axp_regulator_plat *const axp_regulators[] = { |
| 272 | [AXP152_ID] = axp152_regulators, |
| 273 | [AXP202_ID] = axp20x_regulators, |
| 274 | [AXP209_ID] = axp20x_regulators, |
| 275 | [AXP221_ID] = axp22x_regulators, |
| 276 | [AXP223_ID] = axp22x_regulators, |
| 277 | [AXP803_ID] = axp803_regulators, |
| 278 | [AXP806_ID] = axp806_regulators, |
| 279 | [AXP809_ID] = axp809_regulators, |
| 280 | [AXP813_ID] = axp813_regulators, |
| 281 | }; |
| 282 | |
| 283 | static int axp_regulator_bind(struct udevice *dev) |
| 284 | { |
| 285 | struct dm_regulator_uclass_plat *uc_plat = dev_get_uclass_plat(dev); |
| 286 | ulong id = dev_get_driver_data(dev->parent); |
| 287 | const struct axp_regulator_plat *plat; |
| 288 | |
| 289 | for (plat = axp_regulators[id]; plat && plat->name; plat++) |
| 290 | if (!strcmp(plat->name, dev->name)) |
| 291 | break; |
| 292 | if (!plat || !plat->name) |
| 293 | return -ENODEV; |
| 294 | |
| 295 | dev_set_plat(dev, (void *)plat); |
| 296 | |
| 297 | if (plat->volt_reg == NA) |
| 298 | uc_plat->type = REGULATOR_TYPE_FIXED; |
| 299 | else if (!strncmp(plat->name, "dcdc", strlen("dcdc"))) |
| 300 | uc_plat->type = REGULATOR_TYPE_BUCK; |
| 301 | else |
| 302 | uc_plat->type = REGULATOR_TYPE_LDO; |
| 303 | |
| 304 | return 0; |
| 305 | } |
| 306 | |
| 307 | U_BOOT_DRIVER(axp_regulator) = { |
| 308 | .name = "axp_regulator", |
| 309 | .id = UCLASS_REGULATOR, |
| 310 | .bind = axp_regulator_bind, |
| 311 | .ops = &axp_regulator_ops, |
| 312 | }; |