Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 7782cfbc306d04af00faea286a2a62921608f3f4 / . / include / configs / usb_a9263.h
blob: 3aaf0cf431020ba3a27320f2d125398eda576c21 [file] [log] [blame]
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]1/*
2 * (C) Copyright 2007-2013
3 * Stelian Pop <stelian.pop@leadtechdesign.com>
4 * Lead Tech Design <www.leadtechdesign.com>
5 * Thomas Petazzoni, Free Electrons, <thomas.petazzoni@free-electrons.com>
6 * Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
7 *
8 * Settings for Calao USB-A9263 board
9 *
10 * U-Boot image has to be less than 200704 bytes, otherwise at91bootstrap
11 * installed on board will not be able to load it properly.
12 *
13 * SPDX-License-Identifier: GPL-2.0+
14 */
15
16#ifndef __CONFIG_H
17#define __CONFIG_H
18#include <asm/hardware.h>
19
20/* ARM asynchronous clock */
21#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
22#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]23
24#define CONFIG_MACH_TYPE MACH_TYPE_USB_A9263
25
26#define CONFIG_ARCH_CPU_INIT
27
28#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
29#define CONFIG_SETUP_MEMORY_TAGS
30#define CONFIG_INITRD_TAG
31
32#define CONFIG_SKIP_LOWLEVEL_INIT
33
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]34/*
35 * Hardware drivers
36 */
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]37/*
38 * BOOTP options
39 */
40#define CONFIG_BOOTP_BOOTFILESIZE
41#define CONFIG_BOOTP_BOOTPATH
42#define CONFIG_BOOTP_GATEWAY
43#define CONFIG_BOOTP_HOSTNAME
44
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]45/* SDRAM */
46#define CONFIG_NR_DRAM_BANKS 1
47#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
48#define CONFIG_SYS_SDRAM_SIZE 0x04000000
49
50#define CONFIG_SYS_INIT_SP_ADDR \
Wenyou.Yang@microchip.comd5d29162017-07-21 17:07:46 +0800[diff] [blame]51 (ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]52
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]53/* NAND flash */
54#ifdef CONFIG_CMD_NAND
55#define CONFIG_NAND_ATMEL
56#define CONFIG_SYS_MAX_NAND_DEVICE 1
57#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
58/* our ALE is AD21 */
59#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
60/* our CLE is AD22 */
61#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
62#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15)
63#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22)
64#endif
65
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]66/* Ethernet */
67#define CONFIG_MACB
68#define CONFIG_RMII
69#define CONFIG_NET_RETRY_COUNT 20
70#define CONFIG_AT91_WANTS_COMMON_PHY
71
72/* USB */
73#ifdef CONFIG_CMD_USB
74#define CONFIG_USB_ATMEL
75#define CONFIG_USB_OHCI_NEW
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]76#define CONFIG_SYS_USB_OHCI_CPU_INIT
77#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000
78#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
79#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]80#endif
81
82#define CONFIG_SYS_LOAD_ADDR 0x22000000
83
84#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
85#define CONFIG_SYS_MEMTEST_END 0x23e00000
86
Wenyou.Yang@microchip.comd5d29162017-07-21 17:07:46 +0800[diff] [blame]87/* bootstrap + u-boot + env + linux in dataflash on CS0 */
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]88#define CONFIG_ENV_OFFSET 0x2000
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]89#define CONFIG_ENV_SIZE 0x2000
Wenyou.Yang@microchip.comd5d29162017-07-21 17:07:46 +0800[diff] [blame]90#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
91#define CONFIG_ENV_SPI_MAX_HZ 15000000
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]92#define CONFIG_BOOTCOMMAND "nboot 21000000 0"
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]93#define CONFIG_EXTRA_ENV_SETTINGS \
Tom Rini5ad8e112017-10-22 17:55:07 -0400[diff] [blame]94 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]95
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]96#define CONFIG_CMDLINE_EDITING
97#define CONFIG_AUTO_COMPLETE
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]98#define CONFIG_SYS_LONGHELP
99
100/*
101 * Size of malloc() pool
102 */
103#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
104
105#endif