Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 762f85bb2e36762ee4d7395002b8181905aec690 / . / src / arm64 / rockchip / rk3566-powkiddy-rk2023.dtsi
blob: bd332714a023985d96fd320dfe60a1f0d8ccf435 [file] [log] [blame]
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2
3/dts-v1/;
4
5#include <dt-bindings/gpio/gpio.h>
6#include <dt-bindings/input/linux-event-codes.h>
7#include <dt-bindings/leds/common.h>
8#include <dt-bindings/pinctrl/rockchip.h>
9#include <dt-bindings/soc/rockchip,vop2.h>
10#include "rk3566.dtsi"
11
12/ {
Tom Rini762f85b2024-07-20 11:15:10 -0600[diff] [blame^]13 chassis-type = "handset";
14
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]15 aliases {
16 mmc1 = &sdmmc0;
17 mmc2 = &sdmmc1;
18 mmc3 = &sdmmc2;
19 };
20
21 adc-joystick {
22 compatible = "adc-joystick";
23 io-channels = <&adc_mux 0>,
24 <&adc_mux 1>,
25 <&adc_mux 2>,
26 <&adc_mux 3>;
27 pinctrl-0 = <&joy_mux_en>;
28 pinctrl-names = "default";
29 poll-interval = <60>;
30 #address-cells = <1>;
31 #size-cells = <0>;
32
33 axis@0 {
34 reg = <0>;
35 abs-flat = <32>;
36 abs-fuzz = <32>;
37 abs-range = <1023 15>;
38 linux,code = <ABS_X>;
39 };
40
41 axis@1 {
42 reg = <1>;
43 abs-flat = <32>;
44 abs-fuzz = <32>;
45 abs-range = <15 1023>;
46 linux,code = <ABS_RX>;
47 };
48
49 axis@2 {
50 reg = <2>;
51 abs-flat = <32>;
52 abs-fuzz = <32>;
53 abs-range = <15 1023>;
54 linux,code = <ABS_Y>;
55 };
56
57 axis@3 {
58 reg = <3>;
59 abs-flat = <32>;
60 abs-fuzz = <32>;
61 abs-range = <1023 15>;
62 linux,code = <ABS_RY>;
63 };
64 };
65
66 adc_mux: adc-mux {
67 compatible = "io-channel-mux";
68 channels = "left_x", "right_x", "left_y", "right_y";
69 #io-channel-cells = <1>;
70 io-channels = <&saradc 3>;
71 io-channel-names = "parent";
72 mux-controls = <&gpio_mux>;
73 settle-time-us = <100>;
74 };
75
76 backlight: backlight {
77 compatible = "pwm-backlight";
78 power-supply = <&vcc_sys>;
79 pwms = <&pwm4 0 25000 0>;
80 };
81
82 battery: battery {
83 compatible = "simple-battery";
84 charge-full-design-microamp-hours = <3151000>;
85 charge-term-current-microamp = <300000>;
86 constant-charge-current-max-microamp = <2000000>;
87 constant-charge-voltage-max-microvolt = <4250000>;
88 factory-internal-resistance-micro-ohms = <117000>;
89 voltage-max-design-microvolt = <4172000>;
90 voltage-min-design-microvolt = <3400000>;
91
92 ocv-capacity-celsius = <20>;
93 ocv-capacity-table-0 = <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>,
94 <3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>,
95 <3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>,
96 <3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>,
97 <3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>,
98 <3400000 0>;
99 };
100
101 gpio_keys_control: gpio-keys-control {
102 compatible = "gpio-keys";
103 pinctrl-0 = <&btn_pins_ctrl>;
104 pinctrl-names = "default";
105
106 button-a {
107 gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
108 label = "EAST";
109 linux,code = <BTN_EAST>;
110 };
111
112 button-b {
113 gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
114 label = "SOUTH";
115 linux,code = <BTN_SOUTH>;
116 };
117
118 button-down {
119 gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
120 label = "DPAD-DOWN";
121 linux,code = <BTN_DPAD_DOWN>;
122 };
123
124 button-l1 {
125 gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
126 label = "TL";
127 linux,code = <BTN_TL>;
128 };
129
130 button-l2 {
131 gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
132 label = "TL2";
133 linux,code = <BTN_TL2>;
134 };
135
136 button-left {
137 gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
138 label = "DPAD-LEFT";
139 linux,code = <BTN_DPAD_LEFT>;
140 };
141
142 button-r1 {
143 gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
144 label = "TR";
145 linux,code = <BTN_TR>;
146 };
147
148 button-r2 {
149 gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
150 label = "TR2";
151 linux,code = <BTN_TR2>;
152 };
153
154 button-right {
155 gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
156 label = "DPAD-RIGHT";
157 linux,code = <BTN_DPAD_RIGHT>;
158 };
159
160 button-select {
161 gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
162 label = "SELECT";
163 linux,code = <BTN_SELECT>;
164 };
165
166 button-start {
167 gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
168 label = "START";
169 linux,code = <BTN_START>;
170 };
171
172 button-thumbl {
173 gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
174 label = "THUMBL";
175 linux,code = <BTN_THUMBL>;
176 };
177
178 button-thumbr {
179 gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
180 label = "THUMBR";
181 linux,code = <BTN_THUMBR>;
182 };
183
184 button-up {
185 gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
186 label = "DPAD-UP";
187 linux,code = <BTN_DPAD_UP>;
188 };
189
190 button-x {
191 gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
192 label = "NORTH";
193 linux,code = <BTN_NORTH>;
194 };
195
196 button-y {
197 gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
198 label = "WEST";
199 linux,code = <BTN_WEST>;
200 };
201 };
202
203 gpio_keys_vol: gpio-keys-vol {
204 compatible = "gpio-keys";
205 autorepeat;
206 pinctrl-0 = <&btn_pins_vol>;
207 pinctrl-names = "default";
208
209 button-vol-down {
210 gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
211 label = "VOLUMEDOWN";
212 linux,code = <KEY_VOLUMEDOWN>;
213 };
214
215 button-vol-up {
216 gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
217 label = "VOLUMEUP";
218 linux,code = <KEY_VOLUMEUP>;
219 };
220 };
221
222 gpio_mux: mux-controller {
223 compatible = "gpio-mux";
224 mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
225 <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
226 #mux-control-cells = <0>;
227 };
228
229 hdmi-con {
230 compatible = "hdmi-connector";
231 ddc-i2c-bus = <&i2c5>;
232 type = "c";
233
234 port {
235 hdmi_con_in: endpoint {
236 remote-endpoint = <&hdmi_out_con>;
237 };
238 };
239 };
240
241 /*
242 * Device also includes an always on LED that is wired to the 5V input
243 * voltage and is on when the device is plugged in.
244 */
245 leds: pwm-leds {
246 compatible = "pwm-leds";
247
248 green_led: led-0 {
249 color = <LED_COLOR_ID_GREEN>;
250 function = LED_FUNCTION_STATUS;
251 max-brightness = <255>;
252 pwms = <&pwm6 0 25000 0>;
253 };
254
255 red_led: led-1 {
256 color = <LED_COLOR_ID_RED>;
257 function = LED_FUNCTION_CHARGING;
258 max-brightness = <255>;
259 pwms = <&pwm7 0 25000 0>;
260 };
261 };
262
263 sdio_pwrseq: sdio-pwrseq {
264 compatible = "mmc-pwrseq-simple";
265 clocks = <&rk817 1>;
266 clock-names = "ext_clock";
267 pinctrl-0 = <&wifi_enable_h>;
268 pinctrl-names = "default";
269 post-power-on-delay-ms = <200>;
270 reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
271 };
272
273 /*
274 * Channels reversed for speakers. Headphones automatically switch via hardware when
275 * detected with no ability to control output in software. Headphones appear to be mono
276 * (each output channel receives all audio). No microphone support on 3.5mm jack.
277 */
278 sound {
279 compatible = "simple-audio-card";
280 simple-audio-card,name = "rk817_ext";
281 simple-audio-card,format = "i2s";
282 simple-audio-card,mclk-fs = <256>;
283 simple-audio-card,widgets =
284 "Headphone", "Headphones";
285 simple-audio-card,routing =
286 "Headphones", "HPOL",
287 "Headphones", "HPOR";
288
289 simple-audio-card,codec {
290 sound-dai = <&rk817>;
291 };
292
293 simple-audio-card,cpu {
294 sound-dai = <&i2s1_8ch>;
295 };
296 };
297
298 vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 {
299 compatible = "regulator-fixed";
300 gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
301 enable-active-high;
302 pinctrl-0 = <&vcc_lcd_h>;
303 pinctrl-names = "default";
304 regulator-boot-on;
305 regulator-min-microvolt = <3300000>;
306 regulator-max-microvolt = <3300000>;
307 regulator-name = "vcc3v3_lcd0_n";
308 vin-supply = <&vcc_3v3>;
309 regulator-state-mem {
310 regulator-off-in-suspend;
311 };
312 };
313
314 vcc_sys: regulator-vcc-sys {
315 compatible = "regulator-fixed";
316 regulator-always-on;
317 regulator-boot-on;
318 regulator-min-microvolt = <3800000>;
319 regulator-max-microvolt = <3800000>;
320 regulator-name = "vcc_sys";
321 };
322
323 vcc_wifi: regulator-vcc-wifi {
324 compatible = "regulator-fixed";
325 enable-active-high;
326 gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
327 pinctrl-0 = <&vcc_wifi_h>;
328 pinctrl-names = "default";
329 regulator-always-on;
330 regulator-boot-on;
331 regulator-min-microvolt = <3300000>;
332 regulator-max-microvolt = <3300000>;
333 regulator-name = "vcc_wifi";
334 };
335};
336
337&combphy1 {
338 status = "okay";
339};
340
341&cpu0 {
342 cpu-supply = <&vdd_cpu>;
343};
344
345&cpu1 {
346 cpu-supply = <&vdd_cpu>;
347};
348
349&cpu2 {
350 cpu-supply = <&vdd_cpu>;
351};
352
353&cpu3 {
354 cpu-supply = <&vdd_cpu>;
355};
356
357&dsi0 {
358 status = "okay";
359 #address-cells = <1>;
360 #size-cells = <0>;
361
362 ports {
363 dsi0_in: port@0 {
364 reg = <0>;
365 dsi0_in_vp1: endpoint {
366 remote-endpoint = <&vp1_out_dsi0>;
367 };
368 };
369
370 dsi0_out: port@1 {
371 reg = <1>;
372 mipi_out_panel: endpoint {
373 remote-endpoint = <&mipi_in_panel>;
374 };
375 };
376 };
377};
378
379&dsi_dphy0 {
380 status = "okay";
381};
382
383&gpu {
384 mali-supply = <&vdd_gpu>;
385 status = "okay";
386};
387
388&hdmi {
389 ddc-i2c-bus = <&i2c5>;
390 pinctrl-0 = <&hdmitxm0_cec>;
391 pinctrl-names = "default";
392 status = "okay";
393};
394
395&hdmi_in {
396 hdmi_in_vp0: endpoint {
397 remote-endpoint = <&vp0_out_hdmi>;
398 };
399};
400
401&hdmi_out {
402 hdmi_out_con: endpoint {
403 remote-endpoint = <&hdmi_con_in>;
404 };
405};
406
407&hdmi_sound {
408 status = "okay";
409};
410
411&i2c0 {
412 status = "okay";
413
414 rk817: pmic@20 {
415 compatible = "rockchip,rk817";
416 reg = <0x20>;
417 interrupt-parent = <&gpio0>;
418 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
419 clock-output-names = "rk808-clkout1", "rk808-clkout2";
420 clock-names = "mclk";
421 clocks = <&cru I2S1_MCLKOUT_TX>;
422 assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
423 assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
424 #clock-cells = <1>;
425 #sound-dai-cells = <0>;
426 pinctrl-names = "default";
427 pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
428 wakeup-source;
429
430 vcc1-supply = <&vcc_sys>;
431 vcc2-supply = <&vcc_sys>;
432 vcc3-supply = <&vcc_sys>;
433 vcc4-supply = <&vcc_sys>;
434 vcc5-supply = <&vcc_sys>;
435 vcc6-supply = <&vcc_sys>;
436 vcc7-supply = <&vcc_sys>;
437 vcc8-supply = <&vcc_sys>;
438 vcc9-supply = <&dcdc_boost>;
439
440 regulators {
441 vdd_logic: DCDC_REG1 {
442 regulator-always-on;
443 regulator-boot-on;
444 regulator-min-microvolt = <500000>;
445 regulator-max-microvolt = <1350000>;
446 regulator-ramp-delay = <6001>;
447 regulator-initial-mode = <0x2>;
448 regulator-name = "vdd_logic";
449 regulator-state-mem {
450 regulator-off-in-suspend;
451 regulator-suspend-microvolt = <900000>;
452 };
453 };
454
455 vdd_gpu: DCDC_REG2 {
456 regulator-always-on;
457 regulator-boot-on;
458 regulator-min-microvolt = <500000>;
459 regulator-max-microvolt = <1350000>;
460 regulator-ramp-delay = <6001>;
461 regulator-initial-mode = <0x2>;
462 regulator-name = "vdd_gpu";
463 regulator-state-mem {
464 regulator-off-in-suspend;
465 };
466 };
467
468 vcc_ddr: DCDC_REG3 {
469 regulator-always-on;
470 regulator-boot-on;
471 regulator-initial-mode = <0x2>;
472 regulator-name = "vcc_ddr";
473 regulator-state-mem {
474 regulator-on-in-suspend;
475 };
476 };
477
478 vcc_3v3: DCDC_REG4 {
479 regulator-always-on;
480 regulator-boot-on;
481 regulator-min-microvolt = <3300000>;
482 regulator-max-microvolt = <3300000>;
483 regulator-initial-mode = <0x2>;
484 regulator-name = "vcc_3v3";
485 regulator-state-mem {
486 regulator-on-in-suspend;
487 regulator-suspend-microvolt = <3300000>;
488 };
489 };
490
491 vcca1v8_pmu: LDO_REG1 {
492 regulator-always-on;
493 regulator-boot-on;
494 regulator-min-microvolt = <1800000>;
495 regulator-max-microvolt = <1800000>;
496 regulator-name = "vcca1v8_pmu";
497 regulator-state-mem {
498 regulator-on-in-suspend;
499 regulator-suspend-microvolt = <1800000>;
500 };
501 };
502
503 vdda_0v9: LDO_REG2 {
504 regulator-always-on;
505 regulator-boot-on;
506 regulator-min-microvolt = <900000>;
507 regulator-max-microvolt = <900000>;
508 regulator-name = "vdda_0v9";
509 regulator-state-mem {
510 regulator-off-in-suspend;
511 };
512 };
513
514 vdda0v9_pmu: LDO_REG3 {
515 regulator-always-on;
516 regulator-boot-on;
517 regulator-min-microvolt = <900000>;
518 regulator-max-microvolt = <900000>;
519 regulator-name = "vdda0v9_pmu";
520 regulator-state-mem {
521 regulator-on-in-suspend;
522 regulator-suspend-microvolt = <900000>;
523 };
524 };
525
526 vccio_acodec: LDO_REG4 {
527 regulator-always-on;
528 regulator-boot-on;
529 regulator-min-microvolt = <3300000>;
530 regulator-max-microvolt = <3300000>;
531 regulator-name = "vccio_acodec";
532 regulator-state-mem {
533 regulator-off-in-suspend;
534 };
535 };
536
537 vccio_sd: LDO_REG5 {
538 regulator-always-on;
539 regulator-boot-on;
540 regulator-min-microvolt = <1800000>;
541 regulator-max-microvolt = <3300000>;
542 regulator-name = "vccio_sd";
543 regulator-state-mem {
544 regulator-off-in-suspend;
545 };
546 };
547
548 vcc3v3_pmu: LDO_REG6 {
549 regulator-always-on;
550 regulator-boot-on;
551 regulator-min-microvolt = <3300000>;
552 regulator-max-microvolt = <3300000>;
553 regulator-name = "vcc3v3_pmu";
554 regulator-state-mem {
555 regulator-on-in-suspend;
556 regulator-suspend-microvolt = <3300000>;
557 };
558 };
559
560 vcc_1v8: LDO_REG7 {
561 regulator-always-on;
562 regulator-boot-on;
563 regulator-min-microvolt = <1800000>;
564 regulator-max-microvolt = <1800000>;
565 regulator-name = "vcc_1v8";
566 regulator-state-mem {
567 regulator-off-in-suspend;
568 };
569 };
570
571 vcc1v8_dvp: LDO_REG8 {
572 regulator-always-on;
573 regulator-boot-on;
574 regulator-min-microvolt = <1800000>;
575 regulator-max-microvolt = <3300000>;
576 regulator-name = "vcc1v8_dvp";
577 regulator-state-mem {
578 regulator-off-in-suspend;
579 };
580 };
581
582 vcc2v8_dvp: LDO_REG9 {
583 regulator-always-on;
584 regulator-boot-on;
585 regulator-min-microvolt = <2800000>;
586 regulator-max-microvolt = <2800000>;
587 regulator-name = "vcc2v8_dvp";
588 regulator-state-mem {
589 regulator-off-in-suspend;
590 };
591 };
592
593 dcdc_boost: BOOST {
594 regulator-always-on;
595 regulator-boot-on;
596 regulator-min-microvolt = <4700000>;
597 regulator-max-microvolt = <5400000>;
598 regulator-name = "boost";
599 regulator-state-mem {
600 regulator-off-in-suspend;
601 };
602 };
603
604 otg_switch: OTG_SWITCH {
605 regulator-name = "otg_switch";
606 regulator-state-mem {
607 regulator-off-in-suspend;
608 };
609 };
610 };
611
612 rk817_charger: charger {
613 monitored-battery = <&battery>;
614 rockchip,resistor-sense-micro-ohms = <10000>;
615 rockchip,sleep-enter-current-microamp = <300000>;
616 rockchip,sleep-filter-current-microamp = <100000>;
617 };
618 };
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]619};
620
621&i2c5 {
622 pinctrl-0 = <&i2c5m1_xfer>;
623 pinctrl-names = "default";
624 status = "okay";
625};
626
627&i2s0_8ch {
628 status = "okay";
629};
630
631&i2s1_8ch {
632 pinctrl-0 = <&i2s1m0_sclktx
633 &i2s1m0_lrcktx
634 &i2s1m0_sdi0
635 &i2s1m0_sdo0>;
636 pinctrl-names = "default";
637 rockchip,trcm-sync-tx-only;
638 status = "okay";
639};
640
641&pinctrl {
642 gpio-btns {
643 btn_pins_ctrl: btn-pins-ctrl {
644 rockchip,pins =
645 <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
646 <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
647 <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
648 <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
649 <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
650 <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
651 <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
652 <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
653 <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
654 <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
655 <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
656 <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
657 <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>,
658 <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
659 <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>,
660 <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
661 };
662
663 btn_pins_vol: btn-pins-vol {
664 rockchip,pins =
665 <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
666 <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
667 };
668 };
669
670 joy-mux {
671 joy_mux_en: joy-mux-en {
672 rockchip,pins =
673 <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
674 };
675 };
676
677 gpio-lcd {
678 lcd_rst: lcd-rst {
679 rockchip,pins =
680 <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
681 };
682 };
683
684 pmic {
685 pmic_int_l: pmic-int-l {
686 rockchip,pins =
687 <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
688 };
689 };
690
691 sdio-pwrseq {
692 wifi_enable_h: wifi-enable-h {
693 rockchip,pins =
694 <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
695 };
696 };
697
698 vcc3v3-lcd {
699 vcc_lcd_h: vcc-lcd-h {
700 rockchip,pins =
701 <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
702 };
703 };
704
705 vcc-wifi {
706 vcc_wifi_h: vcc-wifi-h {
707 rockchip,pins =
708 <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
709 };
710 };
711};
712
713&pmu_io_domains {
714 status = "okay";
715 pmuio1-supply = <&vcc3v3_pmu>;
716 pmuio2-supply = <&vcc3v3_pmu>;
717 vccio1-supply = <&vccio_acodec>;
718 vccio3-supply = <&vccio_sd>;
719 vccio4-supply = <&vcc_1v8>;
720 vccio5-supply = <&vcc_3v3>;
721 vccio6-supply = <&vcc1v8_dvp>;
722 vccio7-supply = <&vcc_3v3>;
723};
724
725&pwm4 {
726 status = "okay";
727};
728
729&pwm6 {
730 status = "okay";
731};
732
733&pwm7 {
734 status = "okay";
735};
736
737&saradc {
738 vref-supply = <&vcc_1v8>;
739 status = "okay";
740};
741
742&sdmmc0 {
743 bus-width = <4>;
744 cap-sd-highspeed;
745 cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
746 disable-wp;
747 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
748 pinctrl-names = "default";
749 sd-uhs-sdr104;
750 vmmc-supply = <&vcc_3v3>;
751 vqmmc-supply = <&vccio_sd>;
752 status = "okay";
753};
754
755&sdmmc1 {
756 bus-width = <4>;
757 cap-sd-highspeed;
758 cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
759 disable-wp;
760 pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>;
761 pinctrl-names = "default";
762 sd-uhs-sdr104;
763 vmmc-supply = <&vcc_3v3>;
764 vqmmc-supply = <&vcc1v8_dvp>;
765 status = "okay";
766};
767
768&sdmmc2 {
769 bus-width = <4>;
770 cap-sd-highspeed;
771 cap-sdio-irq;
772 keep-power-in-suspend;
773 mmc-pwrseq = <&sdio_pwrseq>;
774 non-removable;
775 pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
776 pinctrl-names = "default";
777 vmmc-supply = <&vcc_wifi>;
778 vqmmc-supply = <&vcca1v8_pmu>;
779 status = "okay";
780};
781
782&tsadc {
783 rockchip,hw-tshut-mode = <1>;
784 rockchip,hw-tshut-polarity = <0>;
785 status = "okay";
786};
787
788&uart1 {
789 pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
790 pinctrl-names = "default";
791 uart-has-rtscts;
792 status = "okay";
793
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]794 bluetooth: bluetooth {
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]795 compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
796 device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
797 enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
798 host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
799 };
800};
801
802&usb_host0_xhci {
803 dr_mode = "peripheral";
804 phys = <&usb2phy0_otg>;
805 phy-names = "usb2-phy";
806 status = "okay";
807};
808
809&usb_host1_ehci {
810 status = "okay";
811};
812
813&usb_host1_ohci {
814 status = "okay";
815};
816
817&usb_host1_xhci {
818 phy-names = "usb2-phy", "usb3-phy";
819 phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>;
820 status = "okay";
821};
822
823&usb2phy0 {
824 status = "okay";
825};
826
827&usb2phy0_otg {
828 status = "okay";
829};
830
831&usb2phy1 {
832 status = "okay";
833};
834
835&usb2phy1_host {
836 status = "okay";
837};
838
839&vop {
840 assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
841 assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
842 status = "okay";
843};
844
845&vop_mmu {
846 status = "okay";
847};
848
849&vp0 {
850 vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
851 reg = <ROCKCHIP_VOP2_EP_HDMI0>;
852 remote-endpoint = <&hdmi_in_vp0>;
853 };
854};
855
856&vp1 {
857 vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
858 reg = <ROCKCHIP_VOP2_EP_MIPI0>;
859 remote-endpoint = <&dsi0_in_vp1>;
860 };
861};