| Tom Rini | 6bb92fc | 2024-05-20 09:54:58 -0600 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | |
| 3 | /dts-v1/; |
| 4 | |
| 5 | #include <dt-bindings/gpio/gpio.h> |
| 6 | #include <dt-bindings/input/linux-event-codes.h> |
| 7 | #include <dt-bindings/pinctrl/rockchip.h> |
| 8 | #include "rk3566-powkiddy-rk2023.dtsi" |
| 9 | |
| 10 | / { |
| 11 | model = "Powkiddy RGB10MAX3"; |
| 12 | compatible = "powkiddy,rgb10max3", "rockchip,rk3566"; |
| 13 | }; |
| 14 | |
| 15 | &bluetooth { |
| 16 | compatible = "realtek,rtl8723ds-bt"; |
| 17 | }; |
| 18 | |
| 19 | &cru { |
| 20 | assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, |
| 21 | <&pmucru PLL_PPLL>, <&cru PLL_VPLL>; |
| 22 | assigned-clock-rates = <32768>, <1200000000>, |
| 23 | <200000000>, <126400000>; |
| 24 | }; |
| 25 | |
| 26 | &dsi0 { |
| 27 | panel: panel@0 { |
| 28 | compatible = "powkiddy,rgb10max3-panel"; |
| 29 | reg = <0>; |
| 30 | backlight = <&backlight>; |
| 31 | iovcc-supply = <&vcc3v3_lcd0_n>; |
| 32 | pinctrl-0 = <&lcd_rst>; |
| 33 | pinctrl-names = "default"; |
| 34 | reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; |
| 35 | rotation = <270>; |
| 36 | vcc-supply = <&vcc3v3_lcd0_n>; |
| 37 | |
| 38 | port { |
| 39 | mipi_in_panel: endpoint { |
| 40 | remote-endpoint = <&mipi_out_panel>; |
| 41 | }; |
| 42 | }; |
| 43 | }; |
| 44 | }; |
| 45 | |
| 46 | &green_led { |
| 47 | default-state = "on"; |
| 48 | function = LED_FUNCTION_POWER; |
| 49 | }; |
| 50 | |
| 51 | &i2c0 { |
| 52 | vdd_cpu: regulator@40 { |
| 53 | compatible = "fcs,fan53555"; |
| 54 | reg = <0x40>; |
| 55 | fcs,suspend-voltage-selector = <1>; |
| 56 | regulator-always-on; |
| 57 | regulator-boot-on; |
| 58 | regulator-min-microvolt = <712500>; |
| 59 | regulator-max-microvolt = <1390000>; |
| 60 | regulator-name = "vdd_cpu"; |
| 61 | regulator-ramp-delay = <2300>; |
| 62 | vin-supply = <&vcc_sys>; |
| 63 | regulator-state-mem { |
| 64 | regulator-off-in-suspend; |
| 65 | }; |
| 66 | }; |
| 67 | }; |
| 68 | |
| 69 | &leds { |
| 70 | amber_led: led-2 { |
| 71 | color = <LED_COLOR_ID_AMBER>; |
| 72 | function = LED_FUNCTION_CHARGING; |
| 73 | max-brightness = <255>; |
| 74 | pwms = <&pwm0 0 25000 0>; |
| 75 | }; |
| 76 | }; |
| 77 | |
| 78 | &pwm0 { |
| 79 | pinctrl-0 = <&pwm0m1_pins>; |
| 80 | pinctrl-names = "default"; |
| 81 | status = "okay"; |
| 82 | }; |
| 83 | |
| 84 | &red_led { |
| 85 | default-state = "off"; |
| 86 | function = LED_FUNCTION_STATUS; |
| 87 | }; |