Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 762f85bb2e36762ee4d7395002b8181905aec690 / . / src / arm64 / rockchip / rk3399-roc-pc.dtsi
blob: ca7a446b656895bc59f14c4d663d8cdaf2dc8ed8 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
4 */
5
6/dts-v1/;
7#include <dt-bindings/input/linux-event-codes.h>
8#include <dt-bindings/pwm/pwm.h>
9#include "rk3399.dtsi"
10#include "rk3399-opp.dtsi"
11
12/ {
13 model = "Firefly ROC-RK3399-PC Board";
14 compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
15
16 aliases {
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]17 ethernet0 = &gmac;
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]18 mmc0 = &sdmmc;
19 mmc1 = &sdhci;
20 };
21
22 chosen {
23 stdout-path = "serial2:1500000n8";
24 };
25
26 backlight: backlight {
27 compatible = "pwm-backlight";
28 pwms = <&pwm0 0 25000 0>;
29 };
30
31 clkin_gmac: external-gmac-clock {
32 compatible = "fixed-clock";
33 clock-frequency = <125000000>;
34 clock-output-names = "clkin_gmac";
35 #clock-cells = <0>;
36 };
37
38 adc-keys {
39 compatible = "adc-keys";
40 io-channels = <&saradc 1>;
41 io-channel-names = "buttons";
42 keyup-threshold-microvolt = <1500000>;
43 poll-interval = <100>;
44
45 button-recovery {
46 label = "Recovery";
47 linux,code = <KEY_VENDOR>;
48 press-threshold-microvolt = <18000>;
49 };
50 };
51
52 gpio-keys {
53 compatible = "gpio-keys";
54 autorepeat;
55 pinctrl-names = "default";
56 pinctrl-0 = <&pwr_key_l>;
57
58 key-power {
59 debounce-interval = <100>;
60 gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
61 label = "GPIO Key Power";
62 linux,code = <KEY_POWER>;
63 wakeup-source;
64 };
65 };
66
67 ir-receiver {
68 compatible = "gpio-ir-receiver";
69 gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
70 pinctrl-names = "default";
71 pinctrl-0 = <&ir_int>;
72 };
73
74 leds {
75 compatible = "gpio-leds";
76 pinctrl-names = "default";
77 pinctrl-0 = <&work_led_pin>, <&diy_led_pin>, <&yellow_led_pin>;
78
79 work_led: led-0 {
80 label = "green:work";
81 gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
82 default-state = "on";
83 linux,default-trigger = "heartbeat";
84 };
85
86 diy_led: led-1 {
87 label = "red:diy";
88 gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
89 default-state = "off";
90 linux,default-trigger = "mmc2";
91 };
92
93 yellow_led: led-2 {
94 label = "yellow:yellow-led";
95 gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
96 default-state = "off";
97 linux,default-trigger = "mmc1";
98 };
99 };
100
101 sdio_pwrseq: sdio-pwrseq {
102 compatible = "mmc-pwrseq-simple";
103 clocks = <&rk808 1>;
104 clock-names = "ext_clock";
105 pinctrl-names = "default";
106 pinctrl-0 = <&wifi_enable_h>;
107
108 /*
109 * On the module itself this is one of these (depending
110 * on the actual card populated):
111 * - SDIO_RESET_L_WL_REG_ON
112 * - PDN (power down when low)
113 */
114 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
115 };
116
117 vcc_vbus_typec0: vcc-vbus-typec0 {
118 compatible = "regulator-fixed";
119 regulator-name = "vcc_vbus_typec0";
120 regulator-always-on;
121 regulator-boot-on;
122 regulator-min-microvolt = <5000000>;
123 regulator-max-microvolt = <5000000>;
124 };
125
126 sys_12v: sys-12v {
127 compatible = "regulator-fixed";
128 regulator-name = "sys_12v";
129 regulator-always-on;
130 regulator-boot-on;
131 vin-supply = <&dc_12v>;
132 };
133
134 /* switched by pmic_sleep */
135 vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
136 compatible = "regulator-fixed";
137 regulator-name = "vcc1v8_s3";
138 regulator-always-on;
139 regulator-boot-on;
140 regulator-min-microvolt = <1800000>;
141 regulator-max-microvolt = <1800000>;
142 vin-supply = <&vcc_1v8>;
143 };
144
145 vcc3v0_sd: vcc3v0-sd {
146 compatible = "regulator-fixed";
147 enable-active-high;
148 gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
149 pinctrl-names = "default";
150 pinctrl-0 = <&vcc3v0_sd_en>;
151 regulator-name = "vcc3v0_sd";
152 regulator-boot-on;
153 regulator-min-microvolt = <3000000>;
154 regulator-max-microvolt = <3000000>;
155 vin-supply = <&vcc3v3_sys>;
156 };
157
158 vcc3v3_sys: vcc3v3-sys {
159 compatible = "regulator-fixed";
160 regulator-name = "vcc3v3_sys";
161 regulator-always-on;
162 regulator-boot-on;
163 regulator-min-microvolt = <3300000>;
164 regulator-max-microvolt = <3300000>;
165 vin-supply = <&sys_12v>;
166 };
167
168 vcca_0v9: vcca-0v9 {
169 compatible = "regulator-fixed";
170 regulator-name = "vcca_0v9";
171 regulator-always-on;
172 regulator-boot-on;
173 regulator-min-microvolt = <900000>;
174 regulator-max-microvolt = <900000>;
175 vin-supply = <&vcc3v3_sys>;
176 };
177
178 /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
179 vcc5v0_host: vcc5v0-host-regulator {
180 compatible = "regulator-fixed";
181 enable-active-high;
182 gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
183 pinctrl-names = "default";
184 pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
185 regulator-name = "vcc5v0_host";
186 vin-supply = <&vcc_sys>;
187 };
188
189 vcc_vbus_typec1: vcc-vbus-typec1 {
190 compatible = "regulator-fixed";
191 enable-active-high;
192 gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
193 pinctrl-names = "default";
194 pinctrl-0 = <&vcc_vbus_typec1_en>;
195 regulator-name = "vcc_vbus_typec1";
196 regulator-always-on;
197 vin-supply = <&vcc_sys>;
198 };
199
200 vcc_sys: vcc-sys {
201 compatible = "regulator-fixed";
202 enable-active-high;
203 gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
204 pinctrl-names = "default";
205 pinctrl-0 = <&vcc_sys_en>;
206 regulator-name = "vcc_sys";
207 regulator-boot-on;
208 regulator-min-microvolt = <5000000>;
209 regulator-max-microvolt = <5000000>;
210 vin-supply = <&sys_12v>;
211 };
212
213 vdd_log: vdd-log {
214 compatible = "pwm-regulator";
215 pwms = <&pwm2 0 25000 1>;
216 regulator-name = "vdd_log";
217 regulator-always-on;
218 regulator-boot-on;
219 regulator-min-microvolt = <450000>;
220 regulator-max-microvolt = <1400000>;
221 pwm-supply = <&vcc3v3_sys>;
222 };
223};
224
225&cpu_l0 {
226 cpu-supply = <&vdd_cpu_l>;
227};
228
229&cpu_l1 {
230 cpu-supply = <&vdd_cpu_l>;
231};
232
233&cpu_l2 {
234 cpu-supply = <&vdd_cpu_l>;
235};
236
237&cpu_l3 {
238 cpu-supply = <&vdd_cpu_l>;
239};
240
241&cpu_b0 {
242 cpu-supply = <&vdd_cpu_b>;
243};
244
245&cpu_b1 {
246 cpu-supply = <&vdd_cpu_b>;
247};
248
249&emmc_phy {
250 status = "okay";
251};
252
253&gmac {
254 assigned-clocks = <&cru SCLK_RMII_SRC>;
255 assigned-clock-parents = <&clkin_gmac>;
256 clock_in_out = "input";
257 phy-supply = <&vcc_lan>;
258 phy-mode = "rgmii";
259 pinctrl-names = "default";
260 pinctrl-0 = <&rgmii_pins>;
261 snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
262 snps,reset-active-low;
263 snps,reset-delays-us = <0 10000 50000>;
264 tx_delay = <0x28>;
265 rx_delay = <0x11>;
266 status = "okay";
267};
268
269&gpu {
270 mali-supply = <&vdd_gpu>;
271 status = "okay";
272};
273
274&hdmi {
275 avdd-0v9-supply = <&vcca0v9_hdmi>;
276 avdd-1v8-supply = <&vcca1v8_hdmi>;
277 ddc-i2c-bus = <&i2c3>;
278 pinctrl-names = "default";
279 pinctrl-0 = <&hdmi_cec>;
280 status = "okay";
281};
282
283&hdmi_sound {
284 status = "okay";
285};
286
287&i2c0 {
288 clock-frequency = <400000>;
289 i2c-scl-rising-time-ns = <168>;
290 i2c-scl-falling-time-ns = <4>;
291 status = "okay";
292
293 rk808: pmic@1b {
294 compatible = "rockchip,rk808";
295 reg = <0x1b>;
296 interrupt-parent = <&gpio1>;
297 interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
298 #clock-cells = <1>;
299 clock-output-names = "xin32k", "rk808-clkout2";
300 pinctrl-names = "default";
301 pinctrl-0 = <&pmic_int_l>;
302 rockchip,system-power-controller;
303 wakeup-source;
304
305 vcc1-supply = <&vcc3v3_sys>;
306 vcc2-supply = <&vcc3v3_sys>;
307 vcc3-supply = <&vcc3v3_sys>;
308 vcc4-supply = <&vcc3v3_sys>;
309 vcc6-supply = <&vcc3v3_sys>;
310 vcc7-supply = <&vcc3v3_sys>;
311 vcc8-supply = <&vcc3v3_sys>;
312 vcc9-supply = <&vcc3v3_sys>;
313 vcc10-supply = <&vcc3v3_sys>;
314 vcc11-supply = <&vcc3v3_sys>;
315 vcc12-supply = <&vcc3v3_sys>;
316 vddio-supply = <&vcc_3v0>;
317
318 regulators {
319 vdd_center: DCDC_REG1 {
320 regulator-name = "vdd_center";
321 regulator-always-on;
322 regulator-boot-on;
323 regulator-min-microvolt = <750000>;
324 regulator-max-microvolt = <1350000>;
325 regulator-ramp-delay = <6001>;
326 regulator-state-mem {
327 regulator-off-in-suspend;
328 };
329 };
330
331 vdd_cpu_l: DCDC_REG2 {
332 regulator-name = "vdd_cpu_l";
333 regulator-always-on;
334 regulator-boot-on;
335 regulator-min-microvolt = <750000>;
336 regulator-max-microvolt = <1350000>;
337 regulator-ramp-delay = <6001>;
338 regulator-state-mem {
339 regulator-off-in-suspend;
340 };
341 };
342
343 vcc_ddr: DCDC_REG3 {
344 regulator-name = "vcc_ddr";
345 regulator-always-on;
346 regulator-boot-on;
347 regulator-state-mem {
348 regulator-on-in-suspend;
349 };
350 };
351
352 vcc_1v8: DCDC_REG4 {
353 regulator-name = "vcc_1v8";
354 regulator-always-on;
355 regulator-boot-on;
356 regulator-min-microvolt = <1800000>;
357 regulator-max-microvolt = <1800000>;
358 regulator-state-mem {
359 regulator-on-in-suspend;
360 regulator-suspend-microvolt = <1800000>;
361 };
362 };
363
364 vcca1v8_codec: LDO_REG1 {
365 regulator-name = "vcca1v8_codec";
366 regulator-always-on;
367 regulator-boot-on;
368 regulator-min-microvolt = <1800000>;
369 regulator-max-microvolt = <1800000>;
370 regulator-state-mem {
371 regulator-off-in-suspend;
372 };
373 };
374
375 vcca1v8_hdmi: LDO_REG2 {
376 regulator-name = "vcca1v8_hdmi";
377 regulator-always-on;
378 regulator-boot-on;
379 regulator-min-microvolt = <1800000>;
380 regulator-max-microvolt = <1800000>;
381 regulator-state-mem {
382 regulator-off-in-suspend;
383 };
384 };
385
386 vcc1v8_pmu: LDO_REG3 {
387 regulator-name = "vcc1v8_pmu";
388 regulator-always-on;
389 regulator-boot-on;
390 regulator-min-microvolt = <1800000>;
391 regulator-max-microvolt = <1800000>;
392 regulator-state-mem {
393 regulator-on-in-suspend;
394 regulator-suspend-microvolt = <1800000>;
395 };
396 };
397
398 vcc_sdio: LDO_REG4 {
399 regulator-name = "vcc_sdio";
400 regulator-always-on;
401 regulator-boot-on;
402 regulator-min-microvolt = <1800000>;
403 regulator-max-microvolt = <3000000>;
404 regulator-state-mem {
405 regulator-on-in-suspend;
406 regulator-suspend-microvolt = <3000000>;
407 };
408 };
409
410 vcca3v0_codec: LDO_REG5 {
411 regulator-name = "vcca3v0_codec";
412 regulator-always-on;
413 regulator-boot-on;
414 regulator-min-microvolt = <3000000>;
415 regulator-max-microvolt = <3000000>;
416 regulator-state-mem {
417 regulator-off-in-suspend;
418 };
419 };
420
421 vcc_1v5: LDO_REG6 {
422 regulator-name = "vcc_1v5";
423 regulator-always-on;
424 regulator-boot-on;
425 regulator-min-microvolt = <1500000>;
426 regulator-max-microvolt = <1500000>;
427 regulator-state-mem {
428 regulator-on-in-suspend;
429 regulator-suspend-microvolt = <1500000>;
430 };
431 };
432
433 vcca0v9_hdmi: LDO_REG7 {
434 regulator-name = "vcca0v9_hdmi";
435 regulator-always-on;
436 regulator-boot-on;
437 regulator-min-microvolt = <900000>;
438 regulator-max-microvolt = <900000>;
439 regulator-state-mem {
440 regulator-off-in-suspend;
441 };
442 };
443
444 vcc_3v0: LDO_REG8 {
445 regulator-name = "vcc_3v0";
446 regulator-always-on;
447 regulator-boot-on;
448 regulator-min-microvolt = <3000000>;
449 regulator-max-microvolt = <3000000>;
450 regulator-state-mem {
451 regulator-on-in-suspend;
452 regulator-suspend-microvolt = <3000000>;
453 };
454 };
455
456 vcc3v3_s3: vcc_lan: SWITCH_REG1 {
457 regulator-name = "vcc3v3_s3";
458 regulator-always-on;
459 regulator-boot-on;
460 regulator-state-mem {
461 regulator-off-in-suspend;
462 };
463 };
464
465 vcc3v3_s0: SWITCH_REG2 {
466 regulator-name = "vcc3v3_s0";
467 regulator-always-on;
468 regulator-boot-on;
469 regulator-state-mem {
470 regulator-off-in-suspend;
471 };
472 };
473 };
474 };
475
476 vdd_cpu_b: regulator@40 {
477 compatible = "silergy,syr827";
478 reg = <0x40>;
479 fcs,suspend-voltage-selector = <1>;
480 pinctrl-names = "default";
481 pinctrl-0 = <&vsel1_pin>;
482 regulator-name = "vdd_cpu_b";
483 regulator-min-microvolt = <712500>;
484 regulator-max-microvolt = <1500000>;
485 regulator-ramp-delay = <1000>;
486 regulator-always-on;
487 regulator-boot-on;
488 vin-supply = <&vcc3v3_sys>;
489
490 regulator-state-mem {
491 regulator-off-in-suspend;
492 };
493 };
494
495 vdd_gpu: regulator@41 {
496 compatible = "silergy,syr828";
497 reg = <0x41>;
498 fcs,suspend-voltage-selector = <1>;
499 pinctrl-names = "default";
500 pinctrl-0 = <&vsel2_pin>;
501 regulator-name = "vdd_gpu";
502 regulator-min-microvolt = <712500>;
503 regulator-max-microvolt = <1500000>;
504 regulator-ramp-delay = <1000>;
505 regulator-always-on;
506 regulator-boot-on;
507 vin-supply = <&vcc3v3_sys>;
508
509 regulator-state-mem {
510 regulator-off-in-suspend;
511 };
512 };
513};
514
515&i2c1 {
516 i2c-scl-rising-time-ns = <300>;
517 i2c-scl-falling-time-ns = <15>;
518 status = "okay";
519};
520
521&i2c3 {
522 i2c-scl-rising-time-ns = <450>;
523 i2c-scl-falling-time-ns = <15>;
524 status = "okay";
525};
526
527&i2c4 {
528 i2c-scl-rising-time-ns = <600>;
529 i2c-scl-falling-time-ns = <20>;
530 status = "okay";
531
532 fusb1: usb-typec@22 {
533 compatible = "fcs,fusb302";
534 reg = <0x22>;
535 interrupt-parent = <&gpio1>;
536 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
537 pinctrl-names = "default";
538 pinctrl-0 = <&fusb1_int>;
539 vbus-supply = <&vcc_vbus_typec1>;
540 status = "okay";
541 };
542};
543
544&i2c7 {
545 i2c-scl-rising-time-ns = <600>;
546 i2c-scl-falling-time-ns = <20>;
547 status = "okay";
548
549 fusb0: usb-typec@22 {
550 compatible = "fcs,fusb302";
551 reg = <0x22>;
552 interrupt-parent = <&gpio1>;
553 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
554 pinctrl-names = "default";
555 pinctrl-0 = <&fusb0_int>;
556 vbus-supply = <&vcc_vbus_typec0>;
557 status = "okay";
558 };
559
560 mp8859: regulator@66 {
561 compatible = "mps,mp8859";
562 reg = <0x66>;
563 dc_12v: mp8859_dcdc {
564 regulator-name = "dc_12v";
565 regulator-min-microvolt = <12000000>;
566 regulator-max-microvolt = <12000000>;
567 regulator-always-on;
568 regulator-boot-on;
569 vin-supply = <&vcc_vbus_typec0>;
570
571 regulator-state-mem {
572 regulator-on-in-suspend;
573 regulator-suspend-microvolt = <12000000>;
574 };
575 };
576 };
577};
578
579&i2s0 {
580 rockchip,playback-channels = <8>;
581 rockchip,capture-channels = <8>;
582 status = "okay";
583};
584
585&i2s1 {
586 rockchip,playback-channels = <2>;
587 rockchip,capture-channels = <2>;
588 status = "okay";
589};
590
591&i2s2 {
592 status = "okay";
593};
594
595&io_domains {
596 audio-supply = <&vcca1v8_codec>;
597 bt656-supply = <&vcc_3v0>;
598 gpio1830-supply = <&vcc_3v0>;
599 sdmmc-supply = <&vcc_sdio>;
600 status = "okay";
601};
602
603&pmu_io_domains {
604 pmu1830-supply = <&vcc_3v0>;
605 status = "okay";
606};
607
608&pinctrl {
609 buttons {
610 pwr_key_l: pwr-key-l {
611 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
612 };
613 };
614
615 ir {
616 ir_int: ir-int {
617 rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
618 };
619 };
620
621 lcd-panel {
622 lcd_panel_reset: lcd-panel-reset {
623 rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
624 };
625 };
626
627 leds {
628 diy_led_pin: diy-led-pin {
629 rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
630 };
631
632 work_led_pin: work-led-pin {
633 rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
634 };
635
636 yellow_led_pin: yellow-led-pin {
637 rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
638 };
639 };
640
641 pmic {
642 vsel1_pin: vsel1-pin {
643 rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
644 };
645
646 vsel2_pin: vsel2-pin {
647 rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
648 };
649 };
650
651 sdio-pwrseq {
652 wifi_enable_h: wifi-enable-h {
653 rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
654 };
655 };
656
657 sdmmc {
658 vcc3v0_sd_en: vcc3v0-sd-en {
659 rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
660 };
661 };
662
663 pmic {
664 pmic_int_l: pmic-int-l {
665 rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
666 };
667 };
668
669 usb2 {
670 vcc5v0_host_en: vcc5v0-host-en {
671 rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
672 };
673
674 vcc_sys_en: vcc-sys-en {
675 rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
676 };
677
678 hub_rst: hub-rst {
679 rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
680 };
681 };
682
683 usb-typec {
684 vcc_vbus_typec1_en: vcc-vbus-typec1-en {
685 rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
686 };
687 };
688
689 fusb30x {
690 fusb0_int: fusb0-int {
691 rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
692 };
693
694 fusb1_int: fusb1-int {
695 rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
696 };
697 };
698};
699
700&pwm0 {
701 status = "okay";
702};
703
704&pwm2 {
705 status = "okay";
706};
707
708&saradc {
709 vref-supply = <&vcca1v8_s3>;
710 status = "okay";
711};
712
713&sdmmc {
714 bus-width = <4>;
715 cap-sd-highspeed;
716 cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
717 disable-wp;
718 max-frequency = <150000000>;
719 pinctrl-names = "default";
720 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
721 sd-uhs-sdr104;
722 vmmc-supply = <&vcc3v0_sd>;
723 vqmmc-supply = <&vcc_sdio>;
724 status = "okay";
725};
726
727&sdhci {
728 bus-width = <8>;
729 non-removable;
730 status = "okay";
731};
732
733&spi1 {
734 status = "okay";
735
736 flash@0 {
737 compatible = "jedec,spi-nor";
738 reg = <0>;
739 spi-max-frequency = <30000000>;
740 };
741};
742
743&tcphy0 {
744 status = "okay";
745};
746
747&tcphy1 {
748 status = "okay";
749};
750
751&tsadc {
752 /* tshut mode 0:CRU 1:GPIO */
753 rockchip,hw-tshut-mode = <1>;
754 /* tshut polarity 0:LOW 1:HIGH */
755 rockchip,hw-tshut-polarity = <1>;
756 status = "okay";
757};
758
759&u2phy0 {
760 status = "okay";
761
762 u2phy0_otg: otg-port {
763 phy-supply = <&vcc_vbus_typec0>;
764 status = "okay";
765 };
766
767 u2phy0_host: host-port {
768 phy-supply = <&vcc5v0_host>;
769 status = "okay";
770 };
771};
772
773&u2phy1 {
774 status = "okay";
775
776 u2phy1_otg: otg-port {
777 phy-supply = <&vcc_vbus_typec1>;
778 status = "okay";
779 };
780
781 u2phy1_host: host-port {
782 phy-supply = <&vcc5v0_host>;
783 status = "okay";
784 };
785};
786
787&uart0 {
788 pinctrl-names = "default";
789 pinctrl-0 = <&uart0_xfer &uart0_cts>;
790 status = "okay";
791};
792
793&uart2 {
794 status = "okay";
795};
796
797&usb_host0_ehci {
798 status = "okay";
799};
800
801&usb_host0_ohci {
802 status = "okay";
803};
804
805&usb_host1_ehci {
806 status = "okay";
807};
808
809&usb_host1_ohci {
810 status = "okay";
811};
812
813&usbdrd3_0 {
814 status = "okay";
815};
816
817&usbdrd_dwc3_0 {
818 status = "okay";
819};
820
821&usbdrd3_1 {
822 status = "okay";
823};
824
825&usbdrd_dwc3_1 {
826 status = "okay";
827 dr_mode = "host";
828};
829
830&vopb {
831 status = "okay";
832};
833
834&vopb_mmu {
835 status = "okay";
836};
837
838&vopl {
839 status = "okay";
840};
841
842&vopl_mmu {
843 status = "okay";
844};