| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| 2 | /* |
| 3 | * Device Tree Source for the RZ/G2UL SMARC pincontrol parts |
| 4 | * |
| 5 | * Copyright (C) 2022 Renesas Electronics Corp. |
| 6 | */ |
| 7 | |
| 8 | #include <dt-bindings/gpio/gpio.h> |
| 9 | #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> |
| 10 | |
| 11 | &pinctrl { |
| 12 | pinctrl-0 = <&sound_clk_pins>; |
| 13 | pinctrl-names = "default"; |
| 14 | |
| 15 | can0_pins: can0 { |
| 16 | pinmux = <RZG2L_PORT_PINMUX(1, 1, 3)>, /* TX */ |
| 17 | <RZG2L_PORT_PINMUX(1, 2, 3)>; /* RX */ |
| 18 | }; |
| 19 | |
| 20 | #if (SW_ET0_EN_N) |
| 21 | can0-stb-hog { |
| 22 | gpio-hog; |
| 23 | gpios = <RZG2L_GPIO(2, 2) GPIO_ACTIVE_HIGH>; |
| 24 | output-low; |
| 25 | line-name = "can0_stb"; |
| 26 | }; |
| 27 | #endif |
| 28 | |
| 29 | can1_pins: can1 { |
| 30 | pinmux = <RZG2L_PORT_PINMUX(2, 0, 3)>, /* TX */ |
| 31 | <RZG2L_PORT_PINMUX(2, 1, 3)>; /* RX */ |
| 32 | }; |
| 33 | |
| 34 | #if (SW_ET0_EN_N) |
| 35 | can1-stb-hog { |
| 36 | gpio-hog; |
| 37 | gpios = <RZG2L_GPIO(2, 3) GPIO_ACTIVE_HIGH>; |
| 38 | output-low; |
| 39 | line-name = "can1_stb"; |
| 40 | }; |
| 41 | #endif |
| 42 | |
| 43 | i2c0_pins: i2c0 { |
| 44 | pins = "RIIC0_SDA", "RIIC0_SCL"; |
| 45 | input-enable; |
| 46 | }; |
| 47 | |
| 48 | i2c1_pins: i2c1 { |
| 49 | pins = "RIIC1_SDA", "RIIC1_SCL"; |
| 50 | input-enable; |
| 51 | }; |
| 52 | |
| 53 | mtu3_pins: mtu3 { |
| 54 | mtu2-pwm { |
| 55 | pinmux = <RZG2L_PORT_PINMUX(4, 0, 4)>; /* MTIOC2A */ |
| 56 | }; |
| 57 | }; |
| 58 | |
| 59 | scif0_pins: scif0 { |
| 60 | pinmux = <RZG2L_PORT_PINMUX(6, 4, 6)>, /* TxD */ |
| 61 | <RZG2L_PORT_PINMUX(6, 3, 6)>; /* RxD */ |
| 62 | }; |
| 63 | |
| 64 | sd1-pwr-en-hog { |
| 65 | gpio-hog; |
| 66 | gpios = <RZG2L_GPIO(0, 3) GPIO_ACTIVE_HIGH>; |
| 67 | output-high; |
| 68 | line-name = "sd1_pwr_en"; |
| 69 | }; |
| 70 | |
| 71 | sdhi1_pins: sd1 { |
| 72 | sd1_data { |
| 73 | pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; |
| 74 | power-source = <3300>; |
| 75 | }; |
| 76 | |
| 77 | sd1_ctrl { |
| 78 | pins = "SD1_CLK", "SD1_CMD"; |
| 79 | power-source = <3300>; |
| 80 | }; |
| 81 | |
| 82 | sd1_mux { |
| 83 | pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */ |
| 84 | }; |
| 85 | }; |
| 86 | |
| 87 | sdhi1_pins_uhs: sd1_uhs { |
| 88 | sd1_data_uhs { |
| 89 | pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; |
| 90 | power-source = <1800>; |
| 91 | }; |
| 92 | |
| 93 | sd1_ctrl_uhs { |
| 94 | pins = "SD1_CLK", "SD1_CMD"; |
| 95 | power-source = <1800>; |
| 96 | }; |
| 97 | |
| 98 | sd1_mux_uhs { |
| 99 | pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */ |
| 100 | }; |
| 101 | }; |
| 102 | |
| 103 | sound_clk_pins: sound_clk { |
| 104 | pins = "AUDIO_CLK1", "AUDIO_CLK2"; |
| 105 | input-enable; |
| 106 | }; |
| 107 | |
| 108 | spi1_pins: spi1 { |
| 109 | pinmux = <RZG2L_PORT_PINMUX(4, 0, 2)>, /* CK */ |
| 110 | <RZG2L_PORT_PINMUX(4, 1, 2)>, /* MOSI */ |
| 111 | <RZG2L_PORT_PINMUX(4, 2, 2)>, /* MISO */ |
| 112 | <RZG2L_PORT_PINMUX(4, 3, 2)>; /* SSL */ |
| 113 | }; |
| 114 | |
| 115 | ssi1_pins: ssi1 { |
| 116 | pinmux = <RZG2L_PORT_PINMUX(3, 0, 2)>, /* BCK */ |
| 117 | <RZG2L_PORT_PINMUX(3, 1, 2)>, /* RCK */ |
| 118 | <RZG2L_PORT_PINMUX(3, 2, 2)>, /* TXD */ |
| 119 | <RZG2L_PORT_PINMUX(3, 3, 2)>; /* RXD */ |
| 120 | }; |
| 121 | |
| 122 | usb0_pins: usb0 { |
| 123 | pinmux = <RZG2L_PORT_PINMUX(5, 0, 1)>, /* VBUS */ |
| 124 | <RZG2L_PORT_PINMUX(5, 2, 1)>, /* OVC */ |
| 125 | <RZG2L_PORT_PINMUX(5, 3, 1)>; /* OTG_ID */ |
| 126 | }; |
| 127 | |
| 128 | usb1_pins: usb1 { |
| 129 | pinmux = <RZG2L_PORT_PINMUX(5, 4, 5)>, /* OVC */ |
| 130 | <RZG2L_PORT_PINMUX(6, 0, 1)>; /* VBUS */ |
| 131 | }; |
| 132 | }; |