| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Device Tree Source for the HiHope RZ/G2[MN] main board Rev.2.0 common |
| 4 | * parts |
| 5 | * |
| 6 | * Copyright (C) 2020 Renesas Electronics Corp. |
| 7 | */ |
| 8 | |
| 9 | #include <dt-bindings/gpio/gpio.h> |
| 10 | #include "hihope-common.dtsi" |
| 11 | |
| 12 | / { |
| 13 | leds { |
| 14 | compatible = "gpio-leds"; |
| 15 | |
| 16 | bt_active_led { |
| 17 | label = "blue:bt"; |
| 18 | gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; |
| 19 | linux,default-trigger = "hci0-power"; |
| 20 | default-state = "off"; |
| 21 | }; |
| 22 | |
| 23 | wlan_active_led { |
| 24 | label = "yellow:wlan"; |
| 25 | gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; |
| 26 | linux,default-trigger = "phy0tx"; |
| 27 | default-state = "off"; |
| 28 | }; |
| 29 | }; |
| 30 | |
| 31 | wlan_en_reg: regulator-wlan_en { |
| 32 | compatible = "regulator-fixed"; |
| 33 | regulator-name = "wlan-en-regulator"; |
| 34 | regulator-min-microvolt = <1800000>; |
| 35 | regulator-max-microvolt = <1800000>; |
| 36 | startup-delay-us = <70000>; |
| 37 | |
| 38 | gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>; |
| 39 | enable-active-high; |
| 40 | }; |
| 41 | }; |
| 42 | |
| 43 | &hscif0 { |
| 44 | bluetooth { |
| 45 | compatible = "ti,wl1837-st"; |
| 46 | enable-gpios = <&gpio_expander 2 GPIO_ACTIVE_HIGH>; |
| 47 | }; |
| 48 | }; |
| 49 | |
| 50 | &i2c4 { |
| 51 | gpio_expander: gpio@20 { |
| 52 | compatible = "onnn,pca9654"; |
| 53 | reg = <0x20>; |
| 54 | gpio-controller; |
| 55 | #gpio-cells = <2>; |
| 56 | }; |
| 57 | }; |
| 58 | |
| 59 | &pfc { |
| 60 | sound_clk_pins: sound_clk { |
| 61 | groups = "audio_clk_a_a"; |
| 62 | function = "audio_clk"; |
| 63 | }; |
| 64 | }; |
| 65 | |
| 66 | &rcar_sound { |
| 67 | pinctrl-0 = <&sound_clk_pins>; |
| 68 | pinctrl-names = "default"; |
| 69 | |
| 70 | status = "okay"; |
| 71 | |
| 72 | /* Single DAI */ |
| 73 | #sound-dai-cells = <0>; |
| 74 | |
| 75 | rsnd_port: port { |
| 76 | rsnd_endpoint: endpoint { |
| 77 | remote-endpoint = <&dw_hdmi0_snd_in>; |
| 78 | |
| 79 | dai-format = "i2s"; |
| 80 | bitclock-master = <&rsnd_endpoint>; |
| 81 | frame-master = <&rsnd_endpoint>; |
| 82 | |
| 83 | playback = <&ssi2>; |
| 84 | }; |
| 85 | }; |
| 86 | }; |