Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 762f85bb2e36762ee4d7395002b8181905aec690 / . / src / arm64 / qcom / sm8250-sony-xperia-edo-pdx203.dts
blob: b70bf9261ba981fb82702db4cc3f1ab49bf477b4 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
4 */
5
6/dts-v1/;
7
8#include "sm8250-sony-xperia-edo.dtsi"
9
10/ {
11 model = "Sony Xperia 1 II";
12 compatible = "sony,pdx203-generic", "qcom,sm8250";
13 chassis-type = "handset";
14};
15
16/delete-node/ &vreg_l7f_1p8;
17
18&i2c5 {
19 clock-frequency = <400000>;
20 status = "okay";
21
22 pmic@75 {
23 compatible = "dlg,slg51000";
24 reg = <0x75>;
25 dlg,cs-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
26 vin5-supply = <&vreg_s1f_1p2>;
27 vin6-supply = <&vreg_s1f_1p2>;
28
29 pinctrl-0 = <&cam_pwr_b_cs>;
30 pinctrl-names = "default";
31
32 regulators {
33 slg51000_1_ldo1: ldo1 {
34 regulator-name = "slg51000_b_ldo1";
35 regulator-min-microvolt = <2400000>;
36 regulator-max-microvolt = <3300000>;
37 };
38
39 slg51000_1_ldo2: ldo2 {
40 regulator-name = "slg51000_b_ldo2";
41 regulator-min-microvolt = <2400000>;
42 regulator-max-microvolt = <3300000>;
43 };
44
45 slg51000_1_ldo3: ldo3 {
46 regulator-name = "slg51000_b_ldo3";
47 regulator-min-microvolt = <1200000>;
48 regulator-max-microvolt = <3750000>;
49 };
50
51 slg51000_1_ldo4: ldo4 {
52 regulator-name = "slg51000_b_ldo4";
53 regulator-min-microvolt = <1200000>;
54 regulator-max-microvolt = <3750000>;
55 };
56
57 slg51000_1_ldo5: ldo5 {
58 regulator-name = "slg51000_b_ldo5";
59 regulator-min-microvolt = <500000>;
60 regulator-max-microvolt = <1200000>;
61 };
62
63 slg51000_1_ldo6: ldo6 {
64 regulator-name = "slg51000_b_ldo6";
65 regulator-min-microvolt = <500000>;
66 regulator-max-microvolt = <1200000>;
67 };
68
69 slg51000_1_ldo7: ldo7 {
70 regulator-name = "slg51000_b_ldo7";
71 regulator-min-microvolt = <1200000>;
72 regulator-max-microvolt = <3750000>;
73 };
74 };
75 };
76};
77
78&i2c15 {
79 pmic@75 {
80 compatible = "dlg,slg51000";
81 reg = <0x75>;
82 dlg,cs-gpios = <&tlmm 71 GPIO_ACTIVE_HIGH>;
83 vin5-supply = <&vreg_l2f_1p3>;
84 vin6-supply = <&vreg_l2f_1p3>;
85
86 pinctrl-0 = <&cam_pwr_a_cs>;
87 pinctrl-names = "default";
88
89 regulators {
90 slg51000_0_ldo1: ldo1 {
91 regulator-name = "slg51000_a_ldo1";
92 regulator-min-microvolt = <2400000>;
93 regulator-max-microvolt = <3300000>;
94 };
95
96 slg51000_0_ldo2: ldo2 {
97 regulator-name = "slg51000_a_ldo2";
98 regulator-min-microvolt = <2400000>;
99 regulator-max-microvolt = <3300000>;
100 };
101
102 slg51000_0_ldo3: ldo3 {
103 regulator-name = "slg51000_a_ldo3";
104 regulator-min-microvolt = <1200000>;
105 regulator-max-microvolt = <3750000>;
106 };
107
108 slg51000_0_ldo4: ldo4 {
109 regulator-name = "slg51000_a_ldo4";
110 regulator-min-microvolt = <1200000>;
111 regulator-max-microvolt = <3750000>;
112 };
113
114 slg51000_0_ldo5: ldo5 {
115 regulator-name = "slg51000_a_ldo5";
116 regulator-min-microvolt = <500000>;
117 regulator-max-microvolt = <1200000>;
118 };
119
120 slg51000_0_ldo6: ldo6 {
121 regulator-name = "slg51000_a_ldo6";
122 regulator-min-microvolt = <500000>;
123 regulator-max-microvolt = <1200000>;
124 };
125
126 slg51000_0_ldo7: ldo7 {
127 regulator-name = "slg51000_a_ldo7";
128 regulator-min-microvolt = <1200000>;
129 regulator-max-microvolt = <3750000>;
130 };
131 };
132 };
133};
134
135&pm8009_gpios {
136 gpio-line-names = "NC", /* GPIO_1 */
137 "CAM_PWR_LD_EN",
138 "WIDEC_PWR_EN",
139 "NC";
140};
141
142&pm8150_gpios {
143 gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
144 "OPTION_2",
145 "NC",
146 "PM_SLP_CLK_IN",
147 "OPTION_1",
148 "NC",
149 "NC",
150 "SP_ARI_PWR_ALARM",
151 "NC",
152 "NC"; /* GPIO_10 */
153};
154
155&pm8150b_gpios {
156 gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
157 "FOCUS_N",
158 "NC",
159 "NC",
160 "RF_LCD_ID_EN",
161 "NC",
162 "NC",
163 "LCD_ID",
164 "NC",
165 "WLC_EN_N", /* GPIO_10 */
166 "NC",
167 "RF_ID";
168};
169
170&pm8150l_gpios {
171 gpio-line-names = "NC", /* GPIO_1 */
172 "PM3003A_EN",
173 "NC",
174 "NC",
175 "NC",
176 "AUX2_THERM",
177 "BB_HP_EN",
178 "FP_LDO_EN",
179 "PMX_RESET_N",
180 "AUX3_THERM", /* GPIO_10 */
181 "DTV_PWR_EN",
182 "PM3003A_MODE";
183};
184
185&tlmm {
186 gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
187 "MDM2AP_ERR_FATAL",
188 "AP_CTI_OUT",
189 "MDM2AP_STATUS",
190 "NFC_I2C_SDA",
191 "NFC_I2C_SCL",
192 "NFC_EN",
193 "NFC_CLK_REQ",
194 "NFC_ESE_PWR_REQ",
195 "DVDT_WRT_DET_AND",
196 "SPK_AMP_RESET_N", /* GPIO_10 */
197 "SPK_AMP_INT_N",
198 "APPS_I2C_1_SDA",
199 "APPS_I2C_1_SCL",
200 "NC",
201 "TX_GTR_THRES_IN",
202 "HST_BT_UART_CTS",
203 "HST_BT_UART_RFR",
204 "HST_BT_UART_TX",
205 "HST_BT_UART_RX",
206 "HST_WLAN_EN", /* GPIO_20 */
207 "HST_BT_EN",
208 "RGBC_IR_PWR_EN",
209 "FP_INT_N",
210 "NC",
211 "NC",
212 "NC",
213 "NC",
214 "NFC_ESE_SPI_MISO",
215 "NFC_ESE_SPI_MOSI",
216 "NFC_ESE_SPI_SCLK", /* GPIO_30 */
217 "NFC_ESE_SPI_CS_N",
218 "WCD_RST_N",
219 "NC",
220 "SDM_DEBUG_UART_TX",
221 "SDM_DEBUG_UART_RX",
222 "TS_I2C_SDA",
223 "TS_I2C_SCL",
224 "TS_INT_N",
225 "FP_SPI_MISO", /* GPIO_40 */
226 "FP_SPI_MOSI",
227 "FP_SPI_SCLK",
228 "FP_SPI_CS_N",
229 "APPS_I2C_0_SDA",
230 "APPS_I2C_0_SCL",
231 "DISP_ERR_FG",
232 "UIM2_DETECT_EN",
233 "NC",
234 "NC",
235 "NC", /* GPIO_50 */
236 "NC",
237 "MDM_UART_CTS",
238 "MDM_UART_RFR",
239 "MDM_UART_TX",
240 "MDM_UART_RX",
241 "AP2MDM_STATUS",
242 "AP2MDM_ERR_FATAL",
243 "MDM_IPC_HS_UART_TX",
244 "MDM_IPC_HS_UART_RX",
245 "NC", /* GPIO_60 */
246 "NC",
247 "NC",
248 "NC",
249 "NC",
250 "USB_CC_DIR",
251 "DISP_VSYNC",
252 "NC",
253 "NC",
254 "CAM_PWR_B_CS",
255 "NC", /* GPIO_70 */
256 "CAM_PWR_A_CS",
257 "SBU_SW_SEL",
258 "SBU_SW_OE",
259 "FP_RESET_N",
260 "FP_RESET_N",
261 "DISP_RESET_N",
262 "DEBUG_GPIO0",
263 "TRAY_DET",
264 "CAM2_RST_N",
265 "PCIE0_RST_N",
266 "PCIE0_CLK_REQ_N", /* GPIO_80 */
267 "PCIE0_WAKE_N",
268 "DVDT_ENABLE",
269 "DVDT_WRT_DET_OR",
270 "NC",
271 "PCIE2_RST_N",
272 "PCIE2_CLK_REQ_N",
273 "PCIE2_WAKE_N",
274 "MDM_VFR_IRQ0",
275 "MDM_VFR_IRQ1",
276 "SW_SERVICE", /* GPIO_90 */
277 "CAM_SOF",
278 "CAM1_RST_N",
279 "CAM0_RST_N",
280 "CAM0_MCLK",
281 "CAM1_MCLK",
282 "CAM2_MCLK",
283 "CAM3_MCLK",
284 "CAM4_MCLK",
285 "TOF_RST_N",
286 "NC", /* GPIO_100 */
287 "CCI0_I2C_SDA",
288 "CCI0_I2C_SCL",
289 "CCI1_I2C_SDA",
290 "CCI1_I2C_SCL_",
291 "CCI2_I2C_SDA",
292 "CCI2_I2C_SCL",
293 "CCI3_I2C_SDA",
294 "CCI3_I2C_SCL",
295 "CAM3_RST_N",
296 "NFC_DWL_REQ", /* GPIO_110 */
297 "NFC_IRQ",
298 "XVS",
299 "NC",
300 "RF_ID_EXTENSION",
301 "SPK_AMP_I2C_SDA",
302 "SPK_AMP_I2C_SCL",
303 "NC",
304 "NC",
305 "WLC_I2C_SDA",
306 "WLC_I2C_SCL", /* GPIO_120 */
307 "ACC_COVER_OPEN",
308 "ALS_PROX_INT_N",
309 "ACCEL_INT",
310 "WLAN_SW_CTRL",
311 "CAMSENSOR_I2C_SDA",
312 "CAMSENSOR_I2C_SCL",
313 "UDON_SWITCH_SEL",
314 "WDOG_DISABLE",
315 "BAROMETER_INT",
316 "NC", /* GPIO_130 */
317 "NC",
318 "FORCED_USB_BOOT",
319 "NC",
320 "NC",
321 "WLC_INT_N",
322 "NC",
323 "NC",
324 "RGBC_IR_INT",
325 "NC",
326 "NC", /* GPIO_140 */
327 "NC",
328 "BT_SLIMBUS_CLK",
329 "BT_SLIMBUS_DATA",
330 "HW_ID_0",
331 "HW_ID_1",
332 "WCD_SWR_TX_CLK",
333 "WCD_SWR_TX_DATA0",
334 "WCD_SWR_TX_DATA1",
335 "WCD_SWR_RX_CLK",
336 "WCD_SWR_RX_DATA0", /* GPIO_150 */
337 "WCD_SWR_RX_DATA1",
338 "SDM_DMIC_CLK1",
339 "SDM_DMIC_DATA1",
340 "SDM_DMIC_CLK2",
341 "SDM_DMIC_DATA2",
342 "SPK_AMP_I2S_CLK",
343 "SPK_AMP_I2S_WS",
344 "SPK_AMP_I2S_ASP_DIN",
345 "SPK_AMP_I2S_ASP_DOUT",
346 "COMPASS_I2C_SDA", /* GPIO_160 */
347 "COMPASS_I2C_SCL",
348 "NC",
349 "NC",
350 "SSC_SPI_1_MISO",
351 "SSC_SPI_1_MOSI",
352 "SSC_SPI_1_CLK",
353 "SSC_SPI_1_CS_N",
354 "NC",
355 "NC",
356 "SSC_SENSOR_I2C_SDA", /* GPIO_170 */
357 "SSC_SENSOR_I2C_SCL",
358 "NC",
359 "NC",
360 "NC",
361 "NC",
362 "HST_BLE_SNS_UART6_TX",
363 "HST_BLE_SNS_UART6_RX",
364 "HST_WLAN_UART_TX",
365 "HST_WLAN_UART_RX";
366
367 cam_pwr_b_cs: cam-pwr-b-state {
368 pins = "gpio69";
369 function = "gpio";
370 drive-strength = <2>;
371 bias-disable;
372 output-low;
373 };
374
375 cam_pwr_a_cs: cam-pwr-a-state {
376 pins = "gpio71";
377 function = "gpio";
378 drive-strength = <2>;
379 bias-disable;
380 output-low;
381 };
382};