Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* |
| 3 | * Copyright 2021 NXP |
| 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | |
| 8 | #include "imx8ulp.dtsi" |
| 9 | |
| 10 | / { |
| 11 | model = "NXP i.MX8ULP EVK"; |
| 12 | compatible = "fsl,imx8ulp-evk", "fsl,imx8ulp"; |
| 13 | |
| 14 | chosen { |
| 15 | stdout-path = &lpuart5; |
| 16 | }; |
| 17 | |
| 18 | memory@80000000 { |
| 19 | device_type = "memory"; |
| 20 | reg = <0x0 0x80000000 0 0x80000000>; |
| 21 | }; |
| 22 | |
| 23 | reserved-memory { |
| 24 | #address-cells = <2>; |
| 25 | #size-cells = <2>; |
| 26 | ranges; |
| 27 | |
| 28 | linux,cma { |
| 29 | compatible = "shared-dma-pool"; |
| 30 | reusable; |
| 31 | size = <0 0x28000000>; |
| 32 | linux,cma-default; |
| 33 | }; |
| 34 | |
| 35 | m33_reserved: noncacheable-section@a8600000 { |
| 36 | reg = <0 0xa8600000 0 0x1000000>; |
| 37 | no-map; |
| 38 | }; |
| 39 | |
Tom Rini | 6bb92fc | 2024-05-20 09:54:58 -0600 | [diff] [blame] | 40 | rsc_table: rsc-table@1fff8000 { |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 41 | reg = <0 0x1fff8000 0 0x1000>; |
| 42 | no-map; |
| 43 | }; |
| 44 | |
| 45 | vdev0vring0: vdev0vring0@aff00000 { |
| 46 | reg = <0 0xaff00000 0 0x8000>; |
| 47 | no-map; |
| 48 | }; |
| 49 | |
| 50 | vdev0vring1: vdev0vring1@aff08000 { |
| 51 | reg = <0 0xaff08000 0 0x8000>; |
| 52 | no-map; |
| 53 | }; |
| 54 | |
| 55 | vdev1vring0: vdev1vring0@aff10000 { |
| 56 | reg = <0 0xaff10000 0 0x8000>; |
| 57 | no-map; |
| 58 | }; |
| 59 | |
| 60 | vdev1vring1: vdev1vring1@aff18000 { |
| 61 | reg = <0 0xaff18000 0 0x8000>; |
| 62 | no-map; |
| 63 | }; |
| 64 | |
| 65 | vdevbuffer: vdevbuffer@a8400000 { |
| 66 | compatible = "shared-dma-pool"; |
| 67 | reg = <0 0xa8400000 0 0x100000>; |
| 68 | no-map; |
| 69 | }; |
| 70 | }; |
| 71 | |
| 72 | clock_ext_rmii: clock-ext-rmii { |
| 73 | compatible = "fixed-clock"; |
| 74 | clock-frequency = <50000000>; |
| 75 | clock-output-names = "ext_rmii_clk"; |
| 76 | #clock-cells = <0>; |
| 77 | }; |
| 78 | |
| 79 | clock_ext_ts: clock-ext-ts { |
| 80 | compatible = "fixed-clock"; |
| 81 | /* External ts clock is 50MHZ from PHY on EVK board. */ |
| 82 | clock-frequency = <50000000>; |
| 83 | clock-output-names = "ext_ts_clk"; |
| 84 | #clock-cells = <0>; |
| 85 | }; |
| 86 | }; |
| 87 | |
| 88 | &cm33 { |
| 89 | mbox-names = "tx", "rx", "rxdb"; |
| 90 | mboxes = <&mu 0 1>, |
| 91 | <&mu 1 1>, |
| 92 | <&mu 3 1>; |
| 93 | memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>, |
| 94 | <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>; |
| 95 | status = "okay"; |
| 96 | }; |
| 97 | |
| 98 | &flexspi2 { |
| 99 | pinctrl-names = "default", "sleep"; |
| 100 | pinctrl-0 = <&pinctrl_flexspi2_ptd>; |
| 101 | pinctrl-1 = <&pinctrl_flexspi2_ptd>; |
| 102 | status = "okay"; |
| 103 | |
| 104 | mx25uw51345gxdi00: flash@0 { |
| 105 | compatible = "jedec,spi-nor"; |
| 106 | reg = <0>; |
| 107 | spi-max-frequency = <200000000>; |
| 108 | spi-tx-bus-width = <8>; |
| 109 | spi-rx-bus-width = <8>; |
| 110 | }; |
| 111 | }; |
| 112 | |
| 113 | &lpuart5 { |
| 114 | /* console */ |
| 115 | pinctrl-names = "default", "sleep"; |
| 116 | pinctrl-0 = <&pinctrl_lpuart5>; |
| 117 | pinctrl-1 = <&pinctrl_lpuart5>; |
| 118 | status = "okay"; |
| 119 | }; |
| 120 | |
| 121 | &lpi2c7 { |
| 122 | #address-cells = <1>; |
| 123 | #size-cells = <0>; |
| 124 | clock-frequency = <400000>; |
| 125 | pinctrl-names = "default", "sleep"; |
| 126 | pinctrl-0 = <&pinctrl_lpi2c7>; |
| 127 | pinctrl-1 = <&pinctrl_lpi2c7>; |
| 128 | status = "okay"; |
| 129 | |
Tom Rini | 762f85b | 2024-07-20 11:15:10 -0600 | [diff] [blame^] | 130 | ptn5150_1: typec@1d { |
| 131 | compatible = "nxp,ptn5150"; |
| 132 | reg = <0x1d>; |
| 133 | int-gpios = <&gpiof 3 IRQ_TYPE_EDGE_FALLING>; |
| 134 | pinctrl-names = "default"; |
| 135 | pinctrl-0 = <&pinctrl_typec1>; |
| 136 | status = "disabled"; |
| 137 | }; |
| 138 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 139 | pcal6408: gpio@21 { |
| 140 | compatible = "nxp,pcal9554b"; |
| 141 | reg = <0x21>; |
| 142 | gpio-controller; |
| 143 | #gpio-cells = <2>; |
| 144 | }; |
Tom Rini | 762f85b | 2024-07-20 11:15:10 -0600 | [diff] [blame^] | 145 | |
| 146 | ptn5150_2: typec@3d { |
| 147 | compatible = "nxp,ptn5150"; |
| 148 | reg = <0x3d>; |
| 149 | int-gpios = <&gpiof 5 IRQ_TYPE_EDGE_FALLING>; |
| 150 | pinctrl-names = "default"; |
| 151 | pinctrl-0 = <&pinctrl_typec2>; |
| 152 | status = "disabled"; |
| 153 | }; |
| 154 | }; |
| 155 | |
| 156 | &usbotg1 { |
| 157 | pinctrl-names = "default"; |
| 158 | pinctrl-0 = <&pinctrl_usb1>; |
| 159 | dr_mode = "otg"; |
| 160 | hnp-disable; |
| 161 | srp-disable; |
| 162 | adp-disable; |
| 163 | over-current-active-low; |
| 164 | status = "okay"; |
| 165 | }; |
| 166 | |
| 167 | &usbphy1 { |
| 168 | fsl,tx-d-cal = <110>; |
| 169 | status = "okay"; |
| 170 | }; |
| 171 | |
| 172 | &usbmisc1 { |
| 173 | status = "okay"; |
| 174 | }; |
| 175 | |
| 176 | &usbotg2 { |
| 177 | pinctrl-names = "default"; |
| 178 | pinctrl-0 = <&pinctrl_usb2>; |
| 179 | dr_mode = "otg"; |
| 180 | hnp-disable; |
| 181 | srp-disable; |
| 182 | adp-disable; |
| 183 | over-current-active-low; |
| 184 | status = "okay"; |
| 185 | }; |
| 186 | |
| 187 | &usbphy2 { |
| 188 | fsl,tx-d-cal = <110>; |
| 189 | status = "okay"; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 190 | }; |
| 191 | |
Tom Rini | 762f85b | 2024-07-20 11:15:10 -0600 | [diff] [blame^] | 192 | &usbmisc2 { |
| 193 | status = "okay"; |
| 194 | }; |
| 195 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 196 | &usdhc0 { |
| 197 | pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; |
| 198 | pinctrl-0 = <&pinctrl_usdhc0>; |
| 199 | pinctrl-1 = <&pinctrl_usdhc0>; |
| 200 | pinctrl-2 = <&pinctrl_usdhc0>; |
| 201 | pinctrl-3 = <&pinctrl_usdhc0>; |
| 202 | non-removable; |
| 203 | bus-width = <8>; |
| 204 | status = "okay"; |
| 205 | }; |
| 206 | |
| 207 | &fec { |
| 208 | pinctrl-names = "default", "sleep"; |
| 209 | pinctrl-0 = <&pinctrl_enet>; |
| 210 | pinctrl-1 = <&pinctrl_enet>; |
| 211 | clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>, |
| 212 | <&pcc4 IMX8ULP_CLK_ENET>, |
| 213 | <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>, |
| 214 | <&clock_ext_rmii>; |
| 215 | clock-names = "ipg", "ahb", "ptp", "enet_clk_ref"; |
| 216 | assigned-clocks = <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>; |
| 217 | assigned-clock-parents = <&clock_ext_ts>; |
| 218 | phy-mode = "rmii"; |
| 219 | phy-handle = <ðphy>; |
| 220 | status = "okay"; |
| 221 | |
| 222 | mdio { |
| 223 | #address-cells = <1>; |
| 224 | #size-cells = <0>; |
| 225 | |
| 226 | ethphy: ethernet-phy@1 { |
| 227 | reg = <1>; |
| 228 | micrel,led-mode = <1>; |
| 229 | }; |
| 230 | }; |
| 231 | }; |
| 232 | |
| 233 | &mu { |
| 234 | status = "okay"; |
| 235 | }; |
| 236 | |
| 237 | &iomuxc1 { |
| 238 | pinctrl_enet: enetgrp { |
| 239 | fsl,pins = < |
| 240 | MX8ULP_PAD_PTE15__ENET0_MDC 0x43 |
| 241 | MX8ULP_PAD_PTE14__ENET0_MDIO 0x43 |
| 242 | MX8ULP_PAD_PTE17__ENET0_RXER 0x43 |
| 243 | MX8ULP_PAD_PTE18__ENET0_CRS_DV 0x43 |
| 244 | MX8ULP_PAD_PTF1__ENET0_RXD0 0x43 |
| 245 | MX8ULP_PAD_PTE20__ENET0_RXD1 0x43 |
| 246 | MX8ULP_PAD_PTE16__ENET0_TXEN 0x43 |
| 247 | MX8ULP_PAD_PTE23__ENET0_TXD0 0x43 |
| 248 | MX8ULP_PAD_PTE22__ENET0_TXD1 0x43 |
| 249 | MX8ULP_PAD_PTE19__ENET0_REFCLK 0x43 |
| 250 | MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43 |
| 251 | >; |
| 252 | }; |
| 253 | |
| 254 | pinctrl_flexspi2_ptd: flexspi2ptdgrp { |
| 255 | fsl,pins = < |
| 256 | |
| 257 | MX8ULP_PAD_PTD12__FLEXSPI2_A_SS0_B 0x42 |
| 258 | MX8ULP_PAD_PTD13__FLEXSPI2_A_SCLK 0x42 |
| 259 | MX8ULP_PAD_PTD14__FLEXSPI2_A_DATA3 0x42 |
| 260 | MX8ULP_PAD_PTD15__FLEXSPI2_A_DATA2 0x42 |
| 261 | MX8ULP_PAD_PTD16__FLEXSPI2_A_DATA1 0x42 |
| 262 | MX8ULP_PAD_PTD17__FLEXSPI2_A_DATA0 0x42 |
| 263 | MX8ULP_PAD_PTD18__FLEXSPI2_A_DQS 0x42 |
| 264 | MX8ULP_PAD_PTD19__FLEXSPI2_A_DATA7 0x42 |
| 265 | MX8ULP_PAD_PTD20__FLEXSPI2_A_DATA6 0x42 |
| 266 | MX8ULP_PAD_PTD21__FLEXSPI2_A_DATA5 0x42 |
| 267 | MX8ULP_PAD_PTD22__FLEXSPI2_A_DATA4 0x42 |
| 268 | >; |
| 269 | }; |
| 270 | |
| 271 | pinctrl_lpuart5: lpuart5grp { |
| 272 | fsl,pins = < |
| 273 | MX8ULP_PAD_PTF14__LPUART5_TX 0x3 |
| 274 | MX8ULP_PAD_PTF15__LPUART5_RX 0x3 |
| 275 | >; |
| 276 | }; |
| 277 | |
| 278 | pinctrl_lpi2c7: lpi2c7grp { |
| 279 | fsl,pins = < |
| 280 | MX8ULP_PAD_PTE12__LPI2C7_SCL 0x20 |
| 281 | MX8ULP_PAD_PTE13__LPI2C7_SDA 0x20 |
| 282 | >; |
| 283 | }; |
| 284 | |
Tom Rini | 762f85b | 2024-07-20 11:15:10 -0600 | [diff] [blame^] | 285 | pinctrl_typec1: typec1grp { |
| 286 | fsl,pins = < |
| 287 | MX8ULP_PAD_PTF3__PTF3 0x3 |
| 288 | >; |
| 289 | }; |
| 290 | |
| 291 | pinctrl_typec2: typec2grp { |
| 292 | fsl,pins = < |
| 293 | MX8ULP_PAD_PTF5__PTF5 0x3 |
| 294 | >; |
| 295 | }; |
| 296 | |
| 297 | pinctrl_usb1: usb1grp { |
| 298 | fsl,pins = < |
| 299 | MX8ULP_PAD_PTF2__USB0_ID 0x10003 |
| 300 | MX8ULP_PAD_PTF4__USB0_OC 0x10003 |
| 301 | >; |
| 302 | }; |
| 303 | |
| 304 | pinctrl_usb2: usb2grp { |
| 305 | fsl,pins = < |
| 306 | MX8ULP_PAD_PTD23__USB1_ID 0x10003 |
| 307 | MX8ULP_PAD_PTF6__USB1_OC 0x10003 |
| 308 | >; |
| 309 | }; |
| 310 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 311 | pinctrl_usdhc0: usdhc0grp { |
| 312 | fsl,pins = < |
| 313 | MX8ULP_PAD_PTD1__SDHC0_CMD 0x3 |
| 314 | MX8ULP_PAD_PTD2__SDHC0_CLK 0x10002 |
| 315 | MX8ULP_PAD_PTD10__SDHC0_D0 0x3 |
| 316 | MX8ULP_PAD_PTD9__SDHC0_D1 0x3 |
| 317 | MX8ULP_PAD_PTD8__SDHC0_D2 0x3 |
| 318 | MX8ULP_PAD_PTD7__SDHC0_D3 0x3 |
| 319 | MX8ULP_PAD_PTD6__SDHC0_D4 0x3 |
| 320 | MX8ULP_PAD_PTD5__SDHC0_D5 0x3 |
| 321 | MX8ULP_PAD_PTD4__SDHC0_D6 0x3 |
| 322 | MX8ULP_PAD_PTD3__SDHC0_D7 0x3 |
| 323 | MX8ULP_PAD_PTD11__SDHC0_DQS 0x10002 |
| 324 | >; |
| 325 | }; |
| 326 | }; |