| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
| 2 | // Copyright (C) 2013 Philipp Zabel |
| 3 | |
| 4 | /dts-v1/; |
| 5 | #include <dt-bindings/gpio/gpio.h> |
| 6 | #include <dt-bindings/input/input.h> |
| 7 | #include "imx6q.dtsi" |
| 8 | |
| 9 | / { |
| 10 | model = "Zealz GK802"; |
| 11 | compatible = "zealz,imx6q-gk802", "fsl,imx6q"; |
| 12 | |
| 13 | chosen { |
| 14 | stdout-path = &uart4; |
| 15 | }; |
| 16 | |
| 17 | memory@10000000 { |
| 18 | device_type = "memory"; |
| 19 | reg = <0x10000000 0x40000000>; |
| 20 | }; |
| 21 | |
| 22 | reg_3p3v: regulator-3p3v { |
| 23 | compatible = "regulator-fixed"; |
| 24 | regulator-name = "3P3V"; |
| 25 | regulator-min-microvolt = <3300000>; |
| 26 | regulator-max-microvolt = <3300000>; |
| 27 | regulator-always-on; |
| 28 | }; |
| 29 | |
| 30 | gpio-keys { |
| 31 | compatible = "gpio-keys"; |
| 32 | |
| 33 | recovery-button { |
| 34 | label = "recovery"; |
| 35 | gpios = <&gpio3 16 1>; |
| 36 | linux,code = <KEY_RESTART>; |
| 37 | wakeup-source; |
| 38 | }; |
| 39 | }; |
| 40 | }; |
| 41 | |
| 42 | &hdmi { |
| 43 | ddc-i2c-bus = <&i2c3>; |
| 44 | status = "okay"; |
| 45 | }; |
| 46 | |
| 47 | /* Internal I2C */ |
| 48 | &i2c2 { |
| 49 | pinctrl-names = "default"; |
| 50 | pinctrl-0 = <&pinctrl_i2c2>; |
| 51 | clock-frequency = <100000>; |
| 52 | status = "okay"; |
| 53 | |
| 54 | /* SDMC DM2016 1024 bit EEPROM + 128 bit OTP */ |
| 55 | eeprom: dm2016@51 { |
| 56 | compatible = "sdmc,dm2016"; |
| 57 | reg = <0x51>; |
| 58 | }; |
| 59 | }; |
| 60 | |
| 61 | /* External I2C via HDMI */ |
| 62 | &i2c3 { |
| 63 | pinctrl-names = "default"; |
| 64 | pinctrl-0 = <&pinctrl_i2c3>; |
| 65 | clock-frequency = <100000>; |
| 66 | status = "okay"; |
| 67 | }; |
| 68 | |
| 69 | &iomuxc { |
| 70 | pinctrl-names = "default"; |
| 71 | pinctrl-0 = <&pinctrl_hog>; |
| 72 | |
| 73 | imx6q-gk802 { |
| 74 | pinctrl_hog: hoggrp { |
| 75 | fsl,pins = < |
| 76 | /* Recovery button, active-low */ |
| 77 | MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x100b1 |
| 78 | /* RTL8192CU enable GPIO, active-low */ |
| 79 | MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 |
| 80 | >; |
| 81 | }; |
| 82 | |
| 83 | pinctrl_i2c2: i2c2grp { |
| 84 | fsl,pins = < |
| 85 | MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 |
| 86 | MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
| 87 | >; |
| 88 | }; |
| 89 | |
| 90 | pinctrl_i2c3: i2c3grp { |
| 91 | fsl,pins = < |
| 92 | MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 |
| 93 | MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 |
| 94 | >; |
| 95 | }; |
| 96 | |
| 97 | pinctrl_uart4: uart4grp { |
| 98 | fsl,pins = < |
| 99 | MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 |
| 100 | MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 |
| 101 | >; |
| 102 | }; |
| 103 | |
| 104 | pinctrl_usdhc3: usdhc3grp { |
| 105 | fsl,pins = < |
| 106 | MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 |
| 107 | MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 |
| 108 | MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 |
| 109 | MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 |
| 110 | MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 |
| 111 | MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 |
| 112 | >; |
| 113 | }; |
| 114 | |
| 115 | pinctrl_usdhc4: usdhc4grp { |
| 116 | fsl,pins = < |
| 117 | MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 |
| 118 | MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 |
| 119 | MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 |
| 120 | MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 |
| 121 | MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 |
| 122 | MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 |
| 123 | >; |
| 124 | }; |
| 125 | }; |
| 126 | }; |
| 127 | |
| 128 | &uart2 { |
| 129 | status = "okay"; |
| 130 | }; |
| 131 | |
| 132 | &uart4 { |
| 133 | pinctrl-names = "default"; |
| 134 | pinctrl-0 = <&pinctrl_uart4>; |
| 135 | status = "okay"; |
| 136 | }; |
| 137 | |
| 138 | /* External USB-A port (USBOTG) */ |
| 139 | &usbotg { |
| 140 | disable-over-current; |
| 141 | status = "okay"; |
| 142 | }; |
| 143 | |
| 144 | /* Internal USB port (USBH1), connected to RTL8192CU */ |
| 145 | &usbh1 { |
| 146 | disable-over-current; |
| 147 | status = "okay"; |
| 148 | }; |
| 149 | |
| 150 | /* External microSD */ |
| 151 | &usdhc3 { |
| 152 | pinctrl-names = "default"; |
| 153 | pinctrl-0 = <&pinctrl_usdhc3>; |
| 154 | bus-width = <4>; |
| 155 | cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; |
| 156 | vmmc-supply = <®_3p3v>; |
| 157 | status = "okay"; |
| 158 | }; |
| 159 | |
| 160 | /* Internal microSD */ |
| 161 | &usdhc4 { |
| 162 | pinctrl-names = "default"; |
| 163 | pinctrl-0 = <&pinctrl_usdhc4>; |
| 164 | bus-width = <4>; |
| 165 | vmmc-supply = <®_3p3v>; |
| 166 | status = "okay"; |
| 167 | }; |