Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 762f85bb2e36762ee4d7395002b8181905aec690 / . / src / arm / nxp / imx / imx6dl-prtmvt.dts
blob: 773a84a5739df13c4a82431094256f25f1a0e171 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Copyright (c) 2016 Protonic Holland
4 * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
5 */
6
7/dts-v1/;
8#include <dt-bindings/display/sdtv-standards.h>
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/input/input.h>
11#include <dt-bindings/leds/common.h>
12#include <dt-bindings/media/tvp5150.h>
13#include <dt-bindings/sound/fsl-imx-audmux.h>
14#include "imx6dl.dtsi"
15
16/ {
17 model = "Protonic MVT board";
18 compatible = "prt,prtmvt", "fsl,imx6dl";
19
20 chosen {
21 stdout-path = &uart4;
22 };
23
24 backlight: backlight {
25 compatible = "pwm-backlight";
26 pinctrl-names = "default";
27 pinctrl-0 = <&pinctrl_backlight>;
28 pwms = <&pwm1 0 5000000 0>;
29 brightness-levels = <0 16 64 255>;
30 num-interpolated-steps = <16>;
31 default-brightness-level = <1>;
32 power-supply = <&reg_3v3>;
33 enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
34 };
35
36 connector {
37 compatible = "composite-video-connector";
38 label = "Composite0";
39 sdtv-standards = <SDTV_STD_PAL_B>;
40
41 port {
42 comp0_out: endpoint {
43 remote-endpoint = <&tvp5150_comp0_in>;
44 };
45 };
46 };
47
48 gpio-keys {
49 compatible = "gpio-keys";
50 pinctrl-names = "default";
51 pinctrl-0 = <&pinctrl_gpiokeys>;
52 autorepeat;
53
54 key-power {
55 label = "Power Button";
56 gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
57 linux,code = <KEY_POWER>;
58 wakeup-source;
59 };
60
61 key-f1 {
62 label = "GPIO Key F1";
63 linux,code = <KEY_F1>;
64 gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
65 };
66
67 key-f2 {
68 label = "GPIO Key F2";
69 linux,code = <KEY_F2>;
70 gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
71 };
72
73 key-f3 {
74 label = "GPIO Key F3";
75 linux,code = <KEY_F3>;
76 gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
77 };
78
79 key-f4 {
80 label = "GPIO Key F4";
81 linux,code = <KEY_F4>;
82 gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
83 };
84
85 key-f5 {
86 label = "GPIO Key F5";
87 linux,code = <KEY_F5>;
88 gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
89 };
90
91 key-cycle {
92 label = "GPIO Key CYCLE";
93 linux,code = <KEY_CYCLEWINDOWS>;
94 gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
95 };
96
97 key-esc {
98 label = "GPIO Key ESC";
99 linux,code = <KEY_ESC>;
100 gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
101 };
102
103 key-up {
104 label = "GPIO Key UP";
105 linux,code = <KEY_UP>;
106 gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
107 };
108
109 key-down {
110 label = "GPIO Key DOWN";
111 linux,code = <KEY_DOWN>;
112 gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
113 };
114
115 key-ok {
116 label = "GPIO Key OK";
117 linux,code = <KEY_OK>;
118 gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
119 };
120
121 key-f6 {
122 label = "GPIO Key F6";
123 linux,code = <KEY_F6>;
124 gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
125 };
126
127 key-f7 {
128 label = "GPIO Key F7";
129 linux,code = <KEY_F7>;
130 gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
131 };
132
133 key-f8 {
134 label = "GPIO Key F8";
135 linux,code = <KEY_F8>;
136 gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
137 };
138
139 key-f9 {
140 label = "GPIO Key F9";
141 linux,code = <KEY_F9>;
142 gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
143 };
144
145 key-f10 {
146 label = "GPIO Key F10";
147 linux,code = <KEY_F10>;
148 gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
149 };
150
151 };
152
153 leds {
154 compatible = "gpio-leds";
155 pinctrl-names = "default";
156 pinctrl-0 = <&pinctrl_leds>;
157
158 led-0 {
159 label = "debug0";
160 function = LED_FUNCTION_HEARTBEAT;
161 gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
162 linux,default-trigger = "heartbeat";
163 };
164
165 led-1 {
166 label = "debug1";
167 function = LED_FUNCTION_DISK;
168 gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
169 linux,default-trigger = "disk-activity";
170 };
171
172 led-2 {
173 label = "power_led";
174 function = LED_FUNCTION_POWER;
175 gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
176 default-state = "on";
177 };
178 };
179
180 panel {
181 compatible = "kyo,tcg070wvlq", "lg,lb070wv8";
182 backlight = <&backlight>;
183 power-supply = <&reg_3v3>;
184
185 port {
186 panel_in: endpoint {
187 remote-endpoint = <&lvds0_out>;
188 };
189 };
190 };
191
192 clk50m_phy: phy-clock {
193 compatible = "fixed-clock";
194 #clock-cells = <0>;
195 clock-frequency = <50000000>;
196 clock-output-names = "enet_ref_pad";
197 };
198
199 reg_1v8: regulator-1v8 {
200 compatible = "regulator-fixed";
201 regulator-name = "1v8";
202 regulator-min-microvolt = <1800000>;
203 regulator-max-microvolt = <1800000>;
204 };
205
206 reg_3v3: regulator-3v3 {
207 compatible = "regulator-fixed";
208 regulator-name = "3v3";
209 regulator-min-microvolt = <3300000>;
210 regulator-max-microvolt = <3300000>;
211 };
212
213 reg_h1_vbus: regulator-h1-vbus {
214 compatible = "regulator-fixed";
215 regulator-name = "h1-vbus";
216 regulator-min-microvolt = <5000000>;
217 regulator-max-microvolt = <5000000>;
218 gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
219 enable-active-high;
220 };
221
222 reg_otg_vbus: regulator-otg-vbus {
223 compatible = "regulator-fixed";
224 regulator-name = "otg-vbus";
225 regulator-min-microvolt = <5000000>;
226 regulator-max-microvolt = <5000000>;
227 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
228 enable-active-high;
229 };
230
231 sound {
232 compatible = "simple-audio-card";
233 simple-audio-card,name = "prti6q-sgtl5000";
234 simple-audio-card,format = "i2s";
235 simple-audio-card,widgets =
236 "Microphone", "Microphone Jack",
237 "Line", "Line In Jack",
238 "Headphone", "Headphone Jack",
239 "Speaker", "External Speaker";
240 simple-audio-card,routing =
241 "MIC_IN", "Microphone Jack",
242 "LINE_IN", "Line In Jack",
243 "Headphone Jack", "HP_OUT",
244 "External Speaker", "LINE_OUT";
245
246 simple-audio-card,cpu {
247 sound-dai = <&ssi1>;
248 system-clock-frequency = <0>;
249 };
250
251 simple-audio-card,codec {
252 sound-dai = <&codec>;
253 bitclock-master;
254 frame-master;
255 };
256 };
257};
258
259&audmux {
260 pinctrl-names = "default";
261 pinctrl-0 = <&pinctrl_audmux>;
262 status = "okay";
263
264 mux-ssi1 {
265 fsl,audmux-port = <0>;
266 fsl,port-config = <
267 IMX_AUDMUX_V2_PTCR_SYN 0
268 IMX_AUDMUX_V2_PTCR_TFSEL(2) 0
269 IMX_AUDMUX_V2_PTCR_TCSEL(2) 0
270 IMX_AUDMUX_V2_PTCR_TFSDIR 0
271 IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
272 >;
273 };
274
275 mux-pins3 {
276 fsl,audmux-port = <2>;
277 fsl,port-config = <
278 IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
279 0 IMX_AUDMUX_V2_PDCR_TXRXEN
280 >;
281 };
282};
283
284&can1 {
285 pinctrl-names = "default";
286 pinctrl-0 = <&pinctrl_can1>;
287 status = "okay";
288};
289
290&can2 {
291 pinctrl-names = "default";
292 pinctrl-0 = <&pinctrl_can2>;
293 status = "okay";
294};
295
296&clks {
297 clocks = <&clk50m_phy>;
298 clock-names = "enet_ref_pad";
299 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>;
300 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>;
301};
302
303&ecspi1 {
304 cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
305 pinctrl-names = "default";
306 pinctrl-0 = <&pinctrl_ecspi1>;
307 status = "okay";
308
309 flash@0 {
310 compatible = "jedec,spi-nor";
311 reg = <0>;
312 spi-max-frequency = <20000000>;
313 };
314};
315
316&fec {
317 pinctrl-names = "default";
318 pinctrl-0 = <&pinctrl_enet>;
319 phy-mode = "rmii";
320 phy-handle = <&rmii_phy>;
321 status = "okay";
322
323 mdio {
324 #address-cells = <1>;
325 #size-cells = <0>;
326
327 /* Microchip KSZ8081RNA PHY */
328 rmii_phy: ethernet-phy@0 {
329 reg = <0>;
330 interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
331 reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
332 reset-assert-us = <10000>;
333 reset-deassert-us = <3000>;
334 };
335 };
336};
337
338&gpio1 {
339 gpio-line-names =
340 "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
341 "CAM2_MIRROR", "", "", "SMBALERT",
342 "DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
343 "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
344 "SD1_DATA3", "", "",
345 "", "", "", "", "", "", "", "";
346};
347
348&gpio2 {
349 gpio-line-names =
350 "", "", "", "", "", "", "", "",
351 "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
352 "BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
353 "", "", "", "", "", "", "", "ON_SWITCH",
354 "POWER_LED", "", "", "", "", "", "", "";
355};
356
357&gpio3 {
358 gpio-line-names =
359 "", "", "", "", "", "", "", "",
360 "", "", "", "", "", "", "", "",
361 "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
362 "CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ",
363 "TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
364 "YACO_RESET";
365};
366
367&gpio4 {
368 gpio-line-names =
369 "", "", "", "", "", "", "", "",
370 "", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX",
371 "", "", "DIP1_FB", "", "", "", "", "",
372 "CPU_LIGHT_ON", "", "ETH_RESET", "", "BL_EN",
373 "BL_PWM", "ETH_INTRP", "";
374};
375
376&gpio5 {
377 gpio-line-names =
378 "", "", "", "", "", "", "", "",
379 "", "", "", "", "", "", "", "",
380 "", "", "", "", "", "", "", "",
381 "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
382 "YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
383};
384
385&i2c1 {
386 clock-frequency = <100000>;
387 pinctrl-names = "default";
388 pinctrl-0 = <&pinctrl_i2c1>;
389 status = "okay";
390
391 codec: audio-codec@a {
392 compatible = "fsl,sgtl5000";
393 reg = <0xa>;
394 #sound-dai-cells = <0>;
395 clocks = <&clks 201>;
396 VDDA-supply = <&reg_3v3>;
397 VDDIO-supply = <&reg_3v3>;
398 VDDD-supply = <&reg_1v8>;
399 };
400
401 video@5c {
402 compatible = "ti,tvp5150";
403 reg = <0x5c>;
404 #address-cells = <1>;
405 #size-cells = <0>;
406
407 port@0 {
408 reg = <0>;
409
410 tvp5150_comp0_in: endpoint {
411 remote-endpoint = <&comp0_out>;
412 };
413 };
414
415 /* Output port 2 is video output pad */
416 port@2 {
417 reg = <2>;
418 tvp5151_to_ipu1_csi0_mux: endpoint {
419 remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
420 };
421 };
422 };
423
424 gpio_pca: gpio@74 {
425 compatible = "nxp,pca9539";
426 reg = <0x74>;
427 pinctrl-names = "default";
428 pinctrl-0 = <&pinctrl_pca9539>;
429 interrupt-parent = <&gpio4>;
430 interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
431 gpio-controller;
432 #gpio-cells = <2>;
433 };
434
435 /* additional i2c devices are added automatically by the boot loader */
436};
437
438&i2c3 {
439 clock-frequency = <100000>;
440 pinctrl-names = "default";
441 pinctrl-0 = <&pinctrl_i2c3>;
442 status = "okay";
443
444 adc@49 {
445 compatible = "ti,ads1015";
446 reg = <0x49>;
447 #address-cells = <1>;
448 #size-cells = <0>;
449
450 channel@4 {
451 reg = <4>;
452 ti,gain = <3>;
453 ti,datarate = <3>;
454 };
455
456 channel@5 {
457 reg = <5>;
458 ti,gain = <3>;
459 ti,datarate = <3>;
460 };
461
462 channel@6 {
463 reg = <6>;
464 ti,gain = <3>;
465 ti,datarate = <3>;
466 };
467
468 channel@7 {
469 reg = <7>;
470 ti,gain = <3>;
471 ti,datarate = <3>;
472 };
473 };
474
475 rtc@51 {
476 compatible = "nxp,pcf8563";
477 reg = <0x51>;
478 };
479
480 temperature-sensor@70 {
481 compatible = "ti,tmp103";
482 reg = <0x70>;
483 };
484};
485
486&ipu1_csi0 {
487 pinctrl-names = "default";
488 pinctrl-0 = <&pinctrl_ipu1_csi0>;
489 status = "okay";
490};
491
492&ipu1_csi0_mux_from_parallel_sensor {
493 remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
494};
495
496&ldb {
497 status = "okay";
498
499 lvds-channel@0 {
500 status = "okay";
501
502 port@4 {
503 reg = <4>;
504
505 lvds0_out: endpoint {
506 remote-endpoint = <&panel_in>;
507 };
508 };
509 };
510};
511
512&pcie {
513 status = "okay";
514};
515
516&pwm1 {
517 pinctrl-names = "default";
518 pinctrl-0 = <&pinctrl_pwm1>;
519 status = "okay";
520};
521
522&ssi1 {
523 #sound-dai-cells = <0>;
524 fsl,mode = "ac97-slave";
525 status = "okay";
526};
527
528&uart1 {
529 pinctrl-names = "default";
530 pinctrl-0 = <&pinctrl_uart1>;
531 status = "okay";
532};
533
534&uart2 {
535 pinctrl-names = "default";
536 pinctrl-0 = <&pinctrl_uart2>;
537 status = "okay";
538};
539
540&uart3 {
541 pinctrl-names = "default";
542 pinctrl-0 = <&pinctrl_uart3>;
543 status = "okay";
544};
545
546&uart4 {
547 pinctrl-names = "default";
548 pinctrl-0 = <&pinctrl_uart4>;
549 status = "okay";
550};
551
552&uart5 {
553 pinctrl-names = "default";
554 pinctrl-0 = <&pinctrl_uart5>;
555 status = "okay";
556};
557
558&usbh1 {
559 vbus-supply = <&reg_h1_vbus>;
560 pinctrl-names = "default";
561 phy_type = "utmi";
562 dr_mode = "host";
563 disable-over-current;
564 status = "okay";
565};
566
567&usbotg {
568 vbus-supply = <&reg_otg_vbus>;
569 pinctrl-names = "default";
570 pinctrl-0 = <&pinctrl_usbotg>;
571 phy_type = "utmi";
572 dr_mode = "host";
573 over-current-active-low;
574 status = "okay";
575};
576
577&usbphynop1 {
578 status = "disabled";
579};
580
581&usbphynop2 {
582 status = "disabled";
583};
584
585&usdhc1 {
586 pinctrl-names = "default";
587 pinctrl-0 = <&pinctrl_usdhc1>;
588 cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
589 no-1-8-v;
590 disable-wp;
591 cap-sd-highspeed;
592 no-mmc;
593 no-sdio;
594 status = "okay";
595};
596
597&usdhc3 {
598 pinctrl-names = "default";
599 pinctrl-0 = <&pinctrl_usdhc3>;
600 bus-width = <8>;
601 no-1-8-v;
602 non-removable;
603 no-sd;
604 no-sdio;
605 status = "okay";
606};
607
608&iomuxc {
609 pinctrl-names = "default";
610 pinctrl-0 = <&pinctrl_hog>;
611
612 pinctrl_audmux: audmuxgrp {
613 fsl,pins = <
614 /* SGTL5000 sys_mclk */
615 MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0
616 MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
617 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
618 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
619 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
620 >;
621 };
622
623 pinctrl_backlight: backlightgrp {
624 fsl,pins = <
625 MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0
626 >;
627 };
628
629 pinctrl_can1: can1grp {
630 fsl,pins = <
631 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000
632 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008
633 /* CAN1_SR */
634 MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008
635 /* CAN1_TERM */
636 MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088
637 >;
638 };
639
640 pinctrl_can2: can2grp {
641 fsl,pins = <
642 MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000
643 MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008
644 /* CAN2_SR */
645 MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008
646 >;
647 };
648
649 pinctrl_ecspi1: ecspi1grp {
650 fsl,pins = <
651 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
652 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
653 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
654 /* CS */
655 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
656 >;
657 };
658
659 pinctrl_enet: enetgrp {
660 fsl,pins = <
661 /* MX6QDL_ENET_PINGRP4 */
662 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
663 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
664 MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
665 MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
666 MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
667 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
668 MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
669 MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
670 MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
671 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
672 /* Phy reset */
673 MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
674 /* nINTRP */
675 MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
676 >;
677 };
678
679 pinctrl_gpiokeys: gpiokeygrp {
680 fsl,pins = <
681 /* nON_SWITCH */
682 MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0
683 >;
684 };
685
686 pinctrl_hog: hoggrp {
687 fsl,pins = <
688 /* ITU656_nRESET */
689 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
690 /* CAM1_MIRROR */
691 MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x130b0
692 /* CAM2_MIRROR */
693 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0
694 /* CAM_nDETECT */
695 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
696 /* ISB_IN1 */
697 MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0
698 /* ISB_nIN2 */
699 MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0
700 /* WARN_LIGHT */
701 MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x100b0
702 /* ON2_FB */
703 MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0
704 /* YACO_nIRQ */
705 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0
706 /* YACO_BOOT0 */
707 MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0
708 /* YACO_nRESET */
709 MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0
710 /* FORCE_ON1 */
711 MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
712 /* AUDIO_nRESET */
713 MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0
714 /* ITU656_nPDN */
715 MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0
716
717 /* HW revision detect */
718 /* REV_ID0 */
719 MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
720 /* REV_ID1 */
721 MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
722 /* REV_ID2 */
723 MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
724 /* REV_ID3 */
725 MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
726 /* REV_ID4 */
727 MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
728
729 /* New in HW revision 1 */
730 /* ON1_FB */
731 MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0
732 /* DIP1_FB */
733 MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0
734 >;
735 };
736
737 pinctrl_i2c1: i2c1grp {
738 fsl,pins = <
739 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1
740 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1
741 >;
742 };
743
744 pinctrl_i2c3: i2c3grp {
745 fsl,pins = <
746 MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
747 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
748 >;
749 };
750
751 pinctrl_ipu1_csi0: ipu1csi0grp {
752 fsl,pins = <
753 MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
754 MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
755 MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
756 MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
757 MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
758 MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
759 MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
760 MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
761 MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
762 >;
763 };
764
765 pinctrl_leds: ledsgrp {
766 fsl,pins = <
767 /* DEBUG0 */
768 MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0
769 /* DEBUG1 */
770 MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0
771 /* POWER_LED */
772 MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0
773 >;
774 };
775
776 pinctrl_pca9539: pca9539 {
777 fsl,pins = <
778 MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
779 >;
780 };
781
782 pinctrl_pwm1: pwm1grp {
783 fsl,pins = <
784 MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
785 >;
786 };
787
788 /* YaCO AUX Uart */
789 pinctrl_uart1: uart1grp {
790 fsl,pins = <
791 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
792 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
793 >;
794 };
795
796 pinctrl_uart2: uart2grp {
797 fsl,pins = <
798 MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
799 MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
800 >;
801 };
802
803 /* YaCO Touchscreen UART */
804 pinctrl_uart3: uart3grp {
805 fsl,pins = <
806 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
807 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
808 >;
809 };
810
811 pinctrl_uart4: uart4grp {
812 fsl,pins = <
813 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
814 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
815 >;
816 };
817
818 pinctrl_uart5: uart5grp {
819 fsl,pins = <
820 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
821 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
822 >;
823 };
824
825 pinctrl_usbotg: usbotggrp {
826 fsl,pins = <
827 MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
828 /* power enable, high active */
829 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
830 >;
831 };
832
833 pinctrl_usdhc1: usdhc1grp {
834 fsl,pins = <
835 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9
836 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
837 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
838 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
839 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
840 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
841 MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
842 >;
843 };
844
845 pinctrl_usdhc3: usdhc3grp {
846 fsl,pins = <
847 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099
848 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099
849 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099
850 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099
851 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099
852 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099
853 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099
854 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099
855 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099
856 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099
857 MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1
858 >;
859 };
860};