Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 762f85bb2e36762ee4d7395002b8181905aec690 / . / src / arm / nxp / imx / imx6dl-eckelmann-ci4x10.dts
blob: 33825b5a8f26c8af3b24a42a1531d4c8f8acb773 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2016 Eckelmann AG.
4 * Copyright (C) 2013 Freescale Semiconductor, Inc.
5 */
6
7/dts-v1/;
8
9#include <dt-bindings/gpio/gpio.h>
10
11#include "imx6dl.dtsi"
12
13/ {
14 model = "Eckelmann CI 4X10 Board";
15 compatible = "eckelmann,imx6dl-ci4x10", "fsl,imx6dl";
16
17 chosen {
18 stdout-path = &uart3;
19 };
20
21 memory@10000000 {
22 device_type = "memory";
23 reg = <0x10000000 0x40000000>;
24 };
25
26 rmii_clk: clock-rmii {
27 /* This clock is provided by the phy (KSZ8091RNB) */
28 compatible = "fixed-clock";
29 #clock-cells = <0>;
30 clock-frequency = <50000000>;
31 clock-output-names = "enet_ref_pad";
32 };
33
34 reg_usb_h1_vbus: regulator-usb-h1-vbus {
35 pinctrl-names = "default";
36 pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>;
37 compatible = "regulator-fixed";
38 regulator-name = "usb_h1_vbus";
39 regulator-min-microvolt = <5000000>;
40 regulator-max-microvolt = <5000000>;
41 gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
42 enable-active-high;
43 };
44
45 siox {
46 compatible = "eckelmann,siox-gpio";
47 pinctrl-names = "default";
48 pinctrl-0 = <&pinctrl_siox>;
49 din-gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
50 dout-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
51 dclk-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
52 dld-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
53 };
54};
55
56&can1 {
57 pinctrl-names = "default";
58 pinctrl-0 = <&pinctrl_flexcan1>;
59 status = "okay";
60};
61
62&can2 {
63 pinctrl-names = "default";
64 pinctrl-0 = <&pinctrl_flexcan2>;
65 status = "okay";
66};
67
68&clks {
69 clocks = <&rmii_clk>;
70 clock-names = "enet_ref_pad";
71 assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
72 assigned-clock-parents = <&rmii_clk>;
73};
74
75&ecspi2 {
76 pinctrl-names = "default";
77 pinctrl-0 = <&pinctrl_ecspi2>;
78 cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
79 status = "okay";
80
81 flash@0 {
82 compatible = "everspin,mr25h256";
83 reg = <0>;
84 spi-max-frequency = <15000000>;
85 };
86};
87
88&ecspi1 {
89 pinctrl-names = "default";
90 pinctrl-0 = <&pinctrl_ecspi1>;
91 cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
92 status = "okay";
93
94 tpm@0 {
95 compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
96 reg = <0>;
97 spi-max-frequency = <10000000>;
98 };
99};
100
101&gpio2 {
102 gpio-line-names = "buzzer", "", "", "", "", "", "", "",
103 "", "", "", "", "", "", "", "",
104 "", "", "", "", "", "", "", "",
105 "", "", "", "", "", "", "", "";
106};
107
108&gpio4 {
109 gpio-line-names = "", "", "", "", "", "", "", "in2",
110 "prio2", "prio1", "aux", "", "", "", "", "",
111 "", "", "", "", "", "", "", "",
112 "", "", "", "", "", "", "", "";
113};
114
115&gpio6 {
116 gpio-line-names = "", "", "", "", "", "", "", "",
117 "", "", "", "", "", "", "", "in1",
118 "", "", "", "", "", "", "", "",
119 "", "", "", "", "", "", "", "";
120};
121
122&i2c1 {
123 pinctrl-names = "default";
124 pinctrl-0 = <&pinctrl_i2c1>;
125 status = "okay";
126
127 temperature-sensor@49 {
128 compatible = "ad,ad7414";
129 reg = <0x49>;
130 };
131
132 rtc@51 {
133 compatible = "nxp,pcf2127";
134 reg = <0x51>;
135 };
136};
137
138&iomuxc {
139 pinctrl-names = "default";
140 pinctrl-0 = <&pinctrl_hog>;
141
142 pinctrl_hog: hog {
143 fsl,pins = <
144 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00000018 /* buzzer */
145 MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x00000018 /* OUT_1 */
146 MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x00000018 /* OUT_2 */
147 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x00000018 /* OUT_3 */
148 MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x00000000 /* In1 */
149 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x00000000 /* In2 */
150 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x00000018 /* unused watchdog pin */
151 MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x00000018 /* unused watchdog pin */
152
153 >;
154 };
155
156 pinctrl_ecspi1: ecspi1grp {
157 fsl,pins = <
158 MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x000100a0
159 MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x000100a0
160 MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x000100a0
161 MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000100a0
162 >;
163 };
164
165 pinctrl_ecspi2: ecspi2grp {
166 fsl,pins = <
167 MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x000100b1
168 MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x000100b1
169 MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x000100b1
170 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000100b1
171 >;
172 };
173
174 pinctrl_enet: enetgrp {
175 fsl,pins = <
176 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
177 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x0001b098
178 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x0001b098
179 MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x0001b098
180 MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x0001b098
181 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x0001b098
182 MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x0001b0b0
183 MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x0001b0b0
184 MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x0001b0b0
185 MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x0001b0b0
186 MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x00000018
187 >;
188 };
189
190 pinctrl_flexcan1: flexcan1grp {
191 fsl,pins = <
192 MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x0001b020
193 MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x0001b0b0
194 >;
195 };
196
197 pinctrl_flexcan2: flexcan2grp {
198 fsl,pins = <
199 MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x0001b020
200 MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x0001b0b0
201 >;
202 };
203
204 pinctrl_i2c1: i2c1grp {
205 fsl,pins = <
206 /* without SION i2c doesn't detect bus busy */
207 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b820
208 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b820
209 >;
210 };
211
212 pinctrl_pcie: pciegrp {
213 fsl,pins = <
214 MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x00000018
215 >;
216 };
217
218 pinctrl_reg_usb_h1_vbus: reg_usb_h1_vbusgrp {
219 fsl,pins = <
220 MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0001b0b0
221 >;
222 };
223
224 pinctrl_siox: sioxgrp {
225 fsl,pins = <
226 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x0001b010 /* DIN */
227 MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b010 /* DOUT */
228 MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0001b010 /* DCLK */
229 MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x0001b010 /* DLD */
230 >;
231 };
232
233 pinctrl_uart1_dte: uart1grp {
234 fsl,pins = <
235 MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x0001b010
236 MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x0001b010
237 MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x0001b010
238 MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x0001b010
239 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x0001b010 /* DCD */
240 MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x0001b010 /* DTR */
241 MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x0001b010 /* DSR */
242 >;
243 };
244
245 pinctrl_uart2_dte: uart2grp {
246 fsl,pins = <
247 MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x0001b010
248 MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x0001b010
249 MX6QDL_PAD_EIM_D28__UART2_RTS_B 0x0001b010
250 MX6QDL_PAD_EIM_D29__UART2_CTS_B 0x0001b010
251 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b010 /* DCD */
252 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b010 /* DTR */
253 MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x0001b010 /* DSR */
254 >;
255 };
256
257 pinctrl_uart3_dce: uart3grp {
258 fsl,pins = <
259 MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x0001b010
260 MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x0001b010
261 >;
262 };
263
264 pinctrl_uart4_dce: uart4grp {
265 fsl,pins = <
266 MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x0001b010
267 MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x0001b010
268 MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x0001b010
269 >;
270 };
271
272 pinctrl_uart5_dce: uart5grp {
273 fsl,pins = <
274 MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x0001b010
275 MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x0001b010
276 MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x0001b010 /* RTS */
277 >;
278 };
279
280 pinctrl_usbh1: usbh1grp {
281 fsl,pins = <
282 MX6QDL_PAD_EIM_D30__USB_H1_OC 0x0001b0b0
283 >;
284 };
285
286 pinctrl_usdhc3: usdhc3grp {
287 fsl,pins = <
288 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x00017059
289 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x00010059
290 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x00017059
291 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x00017059
292 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x00017059
293 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x00017059
294 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x00017059
295 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x00017059
296 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x00017059
297 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x00017059
298 >;
299 };
300};
301
302&fec {
303 pinctrl-names = "default";
304 pinctrl-0 = <&pinctrl_enet>;
305 phy-mode = "rmii";
306 phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
307 phy-handle = <&phy>;
308 status = "okay";
309
310 mdio {
311 #address-cells = <1>;
312 #size-cells = <0>;
313
314 phy: ethernet-phy@1 {
315 compatible = "ethernet-phy-ieee802.3-c22";
316 reg = <1>;
317 };
318 };
319};
320
321&pcie {
322 pinctrl-names = "default";
323 pinctrl-0 = <&pinctrl_pcie>;
324 reset-gpio = <&gpio1 20 GPIO_ACTIVE_LOW>;
325 status = "okay";
326};
327
328&uart1 {
329 pinctrl-names = "default";
330 pinctrl-0 = <&pinctrl_uart1_dte>;
331 uart-has-rtscts;
332 fsl,dte-mode;
333 dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
334 dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
335 dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
336 status = "okay";
337};
338
339&uart2 {
340 pinctrl-names = "default";
341 pinctrl-0 = <&pinctrl_uart2_dte>;
342 uart-has-rtscts;
343 fsl,dte-mode;
344 dcd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
345 dtr-gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
346 dsr-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
347 status = "okay";
348};
349
350&uart3 {
351 pinctrl-names = "default";
352 pinctrl-0 = <&pinctrl_uart3_dce>;
353 status = "okay";
354};
355
356&uart4 {
357 pinctrl-names = "default";
358 pinctrl-0 = <&pinctrl_uart4_dce>;
359 rts-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
360 status = "okay";
361};
362
363&uart5 {
364 pinctrl-names = "default";
365 pinctrl-0 = <&pinctrl_uart5_dce>;
366 rts-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
367 status = "okay";
368};
369
370&usbh1 {
371 pinctrl-names = "default";
372 pinctrl-0 = <&pinctrl_usbh1>;
373 vbus-supply = <&reg_usb_h1_vbus>;
374 status = "okay";
375};
376
377&usbotg {
378 dr_mode = "peripheral";
379 status = "okay";
380};
381
382&usdhc3 {
383 pinctrl-names = "default";
384 pinctrl-0 = <&pinctrl_usdhc3>;
385 bus-width = <8>;
386 non-removable;
387 status = "okay";
388};