Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 762f85bb2e36762ee4d7395002b8181905aec690 / . / src / arm / nxp / imx / imx53-sk-imx53.dts
blob: 1a00d290092ad447d45d5e0cb5117183c4bc3dfe [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: GPL-2.0+
2//
3// Copyright 2023 Linaro Ltd.
4
5/dts-v1/;
6
7#include "imx53.dtsi"
8
9/ {
10 model = "StarterKit SK-iMX53 Board";
11 compatible = "starterkit,sk-imx53", "fsl,imx53";
12
13 aliases {
14 /*
15 * iMX RTC is not battery powered on this board.
16 * Use the i2c RTC as rtc0.
17 */
18 rtc0 = &rtc;
19 rtc1 = &srtc;
20 };
21
22 chosen {
23 stdout-path = &uart1;
24 };
25
26 memory@70000000 {
27 device_type = "memory";
28 /* v2 had only 256 MB, v3 has 512 MB */
29 reg = <0x70000000 0x20000000>;
30 };
31
32 reg_usb1_vbus: regulator-usb-vbus {
33 compatible = "regulator-fixed";
34 regulator-name = "usb_vbus";
35 regulator-min-microvolt = <5000000>;
36 regulator-max-microvolt = <5000000>;
37 gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
38 enable-active-high;
39 };
40
41 reg_usb_otg_vbus: regulator-otg-vbus {
42 compatible = "regulator-fixed";
43 regulator-name = "usb_vbus";
44 regulator-min-microvolt = <5000000>;
45 regulator-max-microvolt = <5000000>;
46 gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
47 enable-active-high;
48 };
49};
50
51&audmux {
52 pinctrl-names = "default";
53 pinctrl-0 = <&pinctrl_audmux>;
54 status = "okay";
55};
56
57&can1 {
58 pinctrl-names = "default";
59 pinctrl-0 = <&pinctrl_can1>;
60 status = "okay";
61};
62
63&cpu0 {
64 /* CPU rated to 800 MHz, not the default 1.2GHz. */
65 operating-points = <
66 /* kHz uV */
67 166666 850000
68 400000 900000
69 800000 1050000
70 >;
71};
72
73&ecspi1 {
74 pinctrl-names = "default";
75 pinctrl-0 = <&pinctrl_ecspi1>;
76 cs-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
77 status = "okay";
78};
79
80&ecspi2 {
81 pinctrl-names = "default";
82 pinctrl-0 = <&pinctrl_ecspi2>;
83 cs-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
84 status = "okay";
85};
86
87&esdhc1 {
88 cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
89 fsl,wp-controller;
90 pinctrl-names = "default";
91 pinctrl-0 = <&pinctrl_esdhc1>;
92 status = "okay";
93};
94
95&fec {
96 pinctrl-names = "default";
97 pinctrl-0 = <&pinctrl_fec>;
98 phy-mode = "rmii";
99 phy-handle = <&phy0>;
100 mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
101 status = "okay";
102
103 mdio {
104 #address-cells = <1>;
105 #size-cells = <0>;
106
107 phy0: ethernet-phy@0 {
108 reg = <0>;
109 reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
110 };
111 };
112};
113
114&i2c1 {
115 pinctrl-names = "default";
116 pinctrl-0 = <&pinctrl_i2c1>;
117 status = "okay";
118};
119
120&i2c2 {
121 pinctrl-names = "default", "gpio";
122 pinctrl-0 = <&pinctrl_i2c2>;
123 pinctrl-1 = <&pinctrl_i2c2_gpio>;
124 sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
125 scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
126 status = "okay";
127
128 tlv320aic23: codec@1a {
129 compatible = "ti,tlv320aic23";
130 reg = <0x1a>;
131 pinctrl-names = "default";
132 pinctrl-0 = <&pinctrl_codec>;
133 #sound-dai-cells = <0>;
134 };
135
136 rtc: rtc@68 {
137 compatible = "dallas,ds1338";
138 reg = <0x68>;
139 };
140};
141
142&iomuxc {
143 pinctrl_audmux: audmuxgrp {
144 fsl,pins = <
145 MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x1e4
146 MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x1e4
147 MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x1e4
148 MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x1e4
149 >;
150 };
151
152 pinctrl_can1: can1grp {
153 fsl,pins = <
154 MX53_PAD_PATA_INTRQ__CAN1_TXCAN 0x1e4
155 MX53_PAD_PATA_DIOR__CAN1_RXCAN 0x1e4
156 >;
157 };
158
159 pinctrl_codec: codecgrp {
160 fsl,pins = <
161 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4
162 >;
163 };
164
165 pinctrl_ecspi1: ecspi1grp {
166 fsl,pins = <
167 MX53_PAD_EIM_D16__ECSPI1_SCLK 0x1e4
168 MX53_PAD_EIM_D17__ECSPI1_MISO 0x1e4
169 MX53_PAD_EIM_D18__ECSPI1_MOSI 0x1e4
170 >;
171 };
172
173 pinctrl_ecspi2: ecspi2grp {
174 fsl,pins = <
175 MX53_PAD_CSI0_DAT9__ECSPI2_MOSI 0x1e4
176 MX53_PAD_CSI0_DAT10__ECSPI2_MISO 0x1e4
177 MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x1e4
178 >;
179 };
180
181 pinctrl_esdhc1: esdhc1grp {
182 fsl,pins = <
183 MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
184 MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
185 MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
186 MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
187 MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
188 MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
189 MX53_PAD_EIM_DA14__GPIO3_14 0x1f0
190 >;
191 };
192
193 pinctrl_fec: fecgrp {
194 fsl,pins = <
195 MX53_PAD_FEC_MDC__FEC_MDC 0x1e4
196 MX53_PAD_FEC_MDIO__FEC_MDIO 0x1e4
197 MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x1e4
198 MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x1e4
199 MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x1e4
200 MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x1e4
201 MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x1e4
202 MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x1c4
203 MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x1e4
204 MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x1e4
205 MX53_PAD_GPIO_1__GPIO1_1 0x1c4
206 >;
207 };
208
209 pinctrl_i2c1: i2c1grp {
210 fsl,pins = <
211 MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4
212 MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4
213 >;
214 };
215
216 pinctrl_i2c2: i2c2grp {
217 fsl,pins = <
218 MX53_PAD_KEY_ROW3__I2C2_SDA 0x400001e4
219 MX53_PAD_EIM_EB2__I2C2_SCL 0x400001e4
220 >;
221 };
222
223 pinctrl_i2c2_gpio: i2c2gpiogrp {
224 fsl,pins = <
225 MX53_PAD_KEY_ROW3__GPIO4_13 0x1e4
226 MX53_PAD_EIM_EB2__GPIO2_30 0x1e4
227 >;
228 };
229
230 pinctrl_nand: nandgrp {
231 fsl,pins = <
232 MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4
233 MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4
234 MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4
235 MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4
236 MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0
237 MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0
238 MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4
239 MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 0x4
240 MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 0x4
241 MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 0x4
242 MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0xa4
243 MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0xa4
244 MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0xa4
245 MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0xa4
246 MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0xa4
247 MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0xa4
248 MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0xa4
249 MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 0xa4
250 >;
251 };
252
253 pinctrl_pwm1: pwm1grp {
254 fsl,pins = <
255 MX53_PAD_GPIO_9__PWM1_PWMO 0x5
256 >;
257 };
258
259 pinctrl_uart1: uart1grp {
260 fsl,pins = <
261 MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
262 MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
263 >;
264 };
265
266 pinctrl_uart3: uart3grp {
267 fsl,pins = <
268 MX53_PAD_EIM_D24__UART3_TXD_MUX 0x1e4
269 MX53_PAD_EIM_D25__UART3_RXD_MUX 0x1e4
270 >;
271 };
272
273 pinctrl_uart4: uart4grp {
274 fsl,pins = <
275 MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4
276 MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4
277 >;
278 };
279};
280
281&nfc {
282 pinctrl-names = "default";
283 pinctrl-0 = <&pinctrl_nand>;
284 nand-bus-width = <8>;
285 status = "okay";
286
287 partitions {
288 compatible = "fixed-partitions";
289 #address-cells = <1>;
290 #size-cells = <1>;
291
292 partition@0 {
293 label = "boot";
294 reg = <0x00000000 0x00100000>;
295 read-only;
296 };
297
298 partition@100000 {
299 label = "u-boot";
300 reg = <0x00100000 0x00100000>;
301 read-only;
302 };
303
304 partition@200000 {
305 label = "u-boot-env";
306 reg = <0x00200000 0x00100000>;
307 read-only;
308 };
309
310 partition@1000000 {
311 label = "kernel-safe";
312 reg = <0x01000000 0x00a00000>;
313 read-only;
314 };
315
316 partition@1a00000 {
317 label = "kernel";
318 reg = <0x01a00000 0x005e0000>;
319 };
320
321 partition@2000000 {
322 label = "ubifs";
323 reg = <0x02000000 0x0e000000>;
324 };
325 };
326};
327
328&pwm1 {
329 pinctrl-names = "default";
330 pinctrl-0 = <&pinctrl_pwm1>;
331 status = "okay";
332};
333
334&sata {
335 status = "okay";
336};
337
338&uart1 {
339 pinctrl-names = "default";
340 pinctrl-0 = <&pinctrl_uart1>;
341 status = "okay";
342};
343
344&uart3 {
345 pinctrl-names = "default";
346 pinctrl-0 = <&pinctrl_uart3>;
347 status = "okay";
348};
349
350&uart4 {
351 pinctrl-names = "default";
352 pinctrl-0 = <&pinctrl_uart4>;
353 status = "okay";
354};
355
356&usbh1 {
357 vbus-supply = <&reg_usb1_vbus>;
358 phy_type = "utmi";
359 disable-over-current;
360 status = "okay";
361};
362
363&usbotg {
364 dr_mode = "peripheral";
365 disable-over-current;
366 status = "okay";
367};