Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | # SPDX-License-Identifier: GPL-2.0 |
| 2 | %YAML 1.2 |
| 3 | --- |
| 4 | $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml# |
| 5 | $schema: http://devicetree.org/meta-schemas/core.yaml# |
| 6 | |
| 7 | title: ARM architected timer |
| 8 | |
| 9 | maintainers: |
| 10 | - Marc Zyngier <marc.zyngier@arm.com> |
| 11 | - Mark Rutland <mark.rutland@arm.com> |
| 12 | description: |+ |
| 13 | ARM cores may have a per-core architected timer, which provides per-cpu timers, |
| 14 | or a memory mapped architected timer, which provides up to 8 frames with a |
| 15 | physical and optional virtual timer per frame. |
| 16 | |
| 17 | The per-core architected timer is attached to a GIC to deliver its |
| 18 | per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC |
| 19 | to deliver its interrupts via SPIs. |
| 20 | |
| 21 | properties: |
| 22 | compatible: |
| 23 | oneOf: |
| 24 | - items: |
| 25 | - const: arm,cortex-a15-timer |
| 26 | - const: arm,armv7-timer |
| 27 | - items: |
| 28 | - enum: |
| 29 | - arm,armv7-timer |
| 30 | - arm,armv8-timer |
| 31 | - items: |
| 32 | - const: arm,armv8-timer |
| 33 | - const: arm,armv7-timer |
| 34 | |
| 35 | interrupts: |
| 36 | minItems: 1 |
| 37 | items: |
| 38 | - description: secure timer irq |
| 39 | - description: non-secure timer irq |
| 40 | - description: virtual timer irq |
| 41 | - description: hypervisor timer irq |
| 42 | - description: hypervisor virtual timer irq |
| 43 | |
| 44 | interrupt-names: |
| 45 | oneOf: |
| 46 | - minItems: 2 |
| 47 | items: |
| 48 | - const: phys |
| 49 | - const: virt |
| 50 | - const: hyp-phys |
| 51 | - const: hyp-virt |
| 52 | - minItems: 3 |
| 53 | items: |
| 54 | - const: sec-phys |
| 55 | - const: phys |
| 56 | - const: virt |
| 57 | - const: hyp-phys |
| 58 | - const: hyp-virt |
| 59 | |
| 60 | clock-frequency: |
| 61 | description: The frequency of the main counter, in Hz. Should be present |
| 62 | only where necessary to work around broken firmware which does not configure |
| 63 | CNTFRQ on all CPUs to a uniform correct value. Use of this property is |
| 64 | strongly discouraged; fix your firmware unless absolutely impossible. |
| 65 | |
| 66 | always-on: |
| 67 | type: boolean |
| 68 | description: If present, the timer is powered through an always-on power |
| 69 | domain, therefore it never loses context. |
| 70 | |
| 71 | allwinner,erratum-unknown1: |
| 72 | type: boolean |
| 73 | description: Indicates the presence of an erratum found in Allwinner SoCs, |
| 74 | where reading certain values from the counter is unreliable. This also |
| 75 | affects writes to the tval register, due to the implicit counter read. |
| 76 | |
| 77 | fsl,erratum-a008585: |
| 78 | type: boolean |
| 79 | description: Indicates the presence of QorIQ erratum A-008585, which says |
| 80 | that reading the counter is unreliable unless the same value is returned |
| 81 | by back-to-back reads. This also affects writes to the tval register, due |
| 82 | to the implicit counter read. |
| 83 | |
| 84 | hisilicon,erratum-161010101: |
| 85 | type: boolean |
| 86 | description: Indicates the presence of Hisilicon erratum 161010101, which |
| 87 | says that reading the counters is unreliable in some cases, and reads may |
| 88 | return a value 32 beyond the correct value. This also affects writes to |
| 89 | the tval registers, due to the implicit counter read. |
| 90 | |
| 91 | arm,cpu-registers-not-fw-configured: |
| 92 | type: boolean |
| 93 | description: Firmware does not initialize any of the generic timer CPU |
| 94 | registers, which contain their architecturally-defined reset values. Only |
| 95 | supported for 32-bit systems which follow the ARMv7 architected reset |
| 96 | values. |
| 97 | |
| 98 | arm,no-tick-in-suspend: |
| 99 | type: boolean |
| 100 | description: The main counter does not tick when the system is in |
| 101 | low-power system suspend on some SoCs. This behavior does not match the |
| 102 | Architecture Reference Manual's specification that the system counter "must |
| 103 | be implemented in an always-on power domain." |
| 104 | |
| 105 | required: |
| 106 | - compatible |
| 107 | |
| 108 | additionalProperties: false |
| 109 | |
| 110 | oneOf: |
| 111 | - required: |
| 112 | - interrupts |
| 113 | - required: |
| 114 | - interrupts-extended |
| 115 | |
| 116 | examples: |
| 117 | - | |
| 118 | timer { |
| 119 | compatible = "arm,cortex-a15-timer", |
| 120 | "arm,armv7-timer"; |
| 121 | interrupts = <1 13 0xf08>, |
| 122 | <1 14 0xf08>, |
| 123 | <1 11 0xf08>, |
| 124 | <1 10 0xf08>; |
| 125 | clock-frequency = <100000000>; |
| 126 | }; |
| 127 | |
| 128 | ... |