Simon Glass | 59c021e | 2014-02-27 13:26:20 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2012 Samsung Electronics |
| 3 | * R. Chandrasekar <rcsekar@samsung.com> |
| 4 | * |
| 5 | * SPDX-License-Identifier: GPL-2.0+ |
| 6 | */ |
| 7 | |
| 8 | #include <malloc.h> |
| 9 | #include <common.h> |
| 10 | #include <asm/io.h> |
Masahiro Yamada | 75f82d0 | 2018-03-05 01:20:11 +0900 | [diff] [blame^] | 11 | #include <linux/libfdt.h> |
Simon Glass | 59c021e | 2014-02-27 13:26:20 -0700 | [diff] [blame] | 12 | #include <fdtdec.h> |
| 13 | #include <i2c.h> |
| 14 | #include <i2s.h> |
| 15 | #include <sound.h> |
| 16 | #include <asm/arch/sound.h> |
| 17 | #include "wm8994.h" |
| 18 | #include "max98095.h" |
| 19 | |
| 20 | /* defines */ |
| 21 | #define SOUND_400_HZ 400 |
| 22 | #define SOUND_BITS_IN_BYTE 8 |
| 23 | |
| 24 | static struct i2stx_info g_i2stx_pri; |
| 25 | |
| 26 | /* |
| 27 | * get_sound_i2s_values gets values for i2s parameters |
| 28 | * |
| 29 | * @param i2stx_info i2s transmitter transfer param structure |
| 30 | * @param blob FDT blob if enabled else NULL |
| 31 | */ |
| 32 | static int get_sound_i2s_values(struct i2stx_info *i2s, const void *blob) |
| 33 | { |
| 34 | int node; |
| 35 | int error = 0; |
| 36 | int base; |
| 37 | |
| 38 | node = fdt_path_offset(blob, "i2s"); |
| 39 | if (node <= 0) { |
| 40 | debug("EXYNOS_SOUND: No node for sound in device tree\n"); |
| 41 | return -1; |
| 42 | } |
| 43 | |
| 44 | /* |
| 45 | * Get the pre-defined sound specific values from FDT. |
| 46 | * All of these are expected to be correct otherwise |
| 47 | * wrong register values in i2s setup parameters |
| 48 | * may result in no sound play. |
| 49 | */ |
| 50 | base = fdtdec_get_addr(blob, node, "reg"); |
| 51 | if (base == FDT_ADDR_T_NONE) { |
| 52 | debug("%s: Missing i2s base\n", __func__); |
| 53 | return -1; |
| 54 | } |
| 55 | i2s->base_address = base; |
| 56 | |
| 57 | i2s->audio_pll_clk = fdtdec_get_int(blob, |
| 58 | node, "samsung,i2s-epll-clock-frequency", -1); |
| 59 | error |= i2s->audio_pll_clk; |
| 60 | debug("audio_pll_clk = %d\n", i2s->audio_pll_clk); |
| 61 | i2s->samplingrate = fdtdec_get_int(blob, |
| 62 | node, "samsung,i2s-sampling-rate", -1); |
| 63 | error |= i2s->samplingrate; |
| 64 | debug("samplingrate = %d\n", i2s->samplingrate); |
| 65 | i2s->bitspersample = fdtdec_get_int(blob, |
| 66 | node, "samsung,i2s-bits-per-sample", -1); |
| 67 | error |= i2s->bitspersample; |
| 68 | debug("bitspersample = %d\n", i2s->bitspersample); |
| 69 | i2s->channels = fdtdec_get_int(blob, |
| 70 | node, "samsung,i2s-channels", -1); |
| 71 | error |= i2s->channels; |
| 72 | debug("channels = %d\n", i2s->channels); |
| 73 | i2s->rfs = fdtdec_get_int(blob, |
| 74 | node, "samsung,i2s-lr-clk-framesize", -1); |
| 75 | error |= i2s->rfs; |
| 76 | debug("rfs = %d\n", i2s->rfs); |
| 77 | i2s->bfs = fdtdec_get_int(blob, |
| 78 | node, "samsung,i2s-bit-clk-framesize", -1); |
| 79 | error |= i2s->bfs; |
| 80 | debug("bfs = %d\n", i2s->bfs); |
| 81 | |
| 82 | i2s->id = fdtdec_get_int(blob, node, "samsung,i2s-id", -1); |
| 83 | error |= i2s->id; |
| 84 | debug("id = %d\n", i2s->id); |
| 85 | |
| 86 | if (error == -1) { |
| 87 | debug("fail to get sound i2s node properties\n"); |
| 88 | return -1; |
| 89 | } |
| 90 | |
| 91 | return 0; |
| 92 | } |
| 93 | |
| 94 | /* |
| 95 | * Init codec |
| 96 | * |
| 97 | * @param blob FDT blob |
| 98 | * @param pi2s_tx i2s parameters required by codec |
| 99 | * @return int value, 0 for success |
| 100 | */ |
| 101 | static int codec_init(const void *blob, struct i2stx_info *pi2s_tx) |
| 102 | { |
| 103 | int ret; |
| 104 | const char *codectype; |
| 105 | int node; |
| 106 | |
| 107 | /* Get the node from FDT for sound */ |
| 108 | node = fdt_path_offset(blob, "i2s"); |
| 109 | if (node <= 0) { |
| 110 | debug("EXYNOS_SOUND: No node for sound in device tree\n"); |
| 111 | debug("node = %d\n", node); |
| 112 | return -1; |
| 113 | } |
| 114 | |
| 115 | /* |
| 116 | * Get the pre-defined sound codec specific values from FDT. |
| 117 | * All of these are expected to be correct otherwise sound |
| 118 | * can not be played |
| 119 | */ |
| 120 | codectype = fdt_getprop(blob, node, "samsung,codec-type", NULL); |
| 121 | debug("device = %s\n", codectype); |
| 122 | if (!strcmp(codectype, "wm8994")) { |
| 123 | /* Check the codec type and initialise the same */ |
| 124 | ret = wm8994_init(blob, pi2s_tx->id + 1, |
| 125 | pi2s_tx->samplingrate, |
| 126 | (pi2s_tx->samplingrate * (pi2s_tx->rfs)), |
| 127 | pi2s_tx->bitspersample, pi2s_tx->channels); |
| 128 | } else if (!strcmp(codectype, "max98095")) { |
| 129 | ret = max98095_init(blob, pi2s_tx->id + 1, |
| 130 | pi2s_tx->samplingrate, |
| 131 | (pi2s_tx->samplingrate * (pi2s_tx->rfs)), |
| 132 | pi2s_tx->bitspersample); |
| 133 | } else { |
| 134 | debug("%s: Unknown codec type %s\n", __func__, codectype); |
| 135 | return -1; |
| 136 | } |
| 137 | |
| 138 | if (ret) { |
| 139 | debug("%s: Codec init failed\n", __func__); |
| 140 | return -1; |
| 141 | } |
| 142 | |
| 143 | return 0; |
| 144 | } |
| 145 | |
| 146 | int sound_init(const void *blob) |
| 147 | { |
| 148 | int ret; |
| 149 | struct i2stx_info *pi2s_tx = &g_i2stx_pri; |
| 150 | |
| 151 | /* Get the I2S Values */ |
| 152 | if (get_sound_i2s_values(pi2s_tx, blob) < 0) { |
| 153 | debug(" FDT I2S values failed\n"); |
| 154 | return -1; |
| 155 | } |
| 156 | |
| 157 | if (codec_init(blob, pi2s_tx) < 0) { |
| 158 | debug(" Codec init failed\n"); |
| 159 | return -1; |
| 160 | } |
| 161 | |
| 162 | ret = i2s_tx_init(pi2s_tx); |
| 163 | if (ret) { |
| 164 | debug("%s: Failed to init i2c transmit: ret=%d\n", __func__, |
| 165 | ret); |
| 166 | return ret; |
| 167 | } |
| 168 | |
| 169 | |
| 170 | return ret; |
| 171 | } |
| 172 | |
| 173 | int sound_play(uint32_t msec, uint32_t frequency) |
| 174 | { |
| 175 | unsigned int *data; |
| 176 | unsigned long data_size; |
| 177 | unsigned int ret = 0; |
| 178 | |
| 179 | /*Buffer length computation */ |
| 180 | data_size = g_i2stx_pri.samplingrate * g_i2stx_pri.channels; |
| 181 | data_size *= (g_i2stx_pri.bitspersample / SOUND_BITS_IN_BYTE); |
| 182 | data = malloc(data_size); |
| 183 | |
| 184 | if (data == NULL) { |
| 185 | debug("%s: malloc failed\n", __func__); |
| 186 | return -1; |
| 187 | } |
| 188 | |
| 189 | sound_create_square_wave((unsigned short *)data, |
| 190 | data_size / sizeof(unsigned short), |
| 191 | frequency); |
| 192 | |
| 193 | while (msec >= 1000) { |
| 194 | ret = i2s_transfer_tx_data(&g_i2stx_pri, data, |
| 195 | (data_size / sizeof(int))); |
| 196 | msec -= 1000; |
| 197 | } |
| 198 | if (msec) { |
| 199 | unsigned long size = |
| 200 | (data_size * msec) / (sizeof(int) * 1000); |
| 201 | |
| 202 | ret = i2s_transfer_tx_data(&g_i2stx_pri, data, size); |
| 203 | } |
| 204 | |
| 205 | free(data); |
| 206 | |
| 207 | return ret; |
| 208 | } |