Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 74758a94ac46c470b1d0790d667946bb5b9db06d / . / include / configs / dragonboard410c.h
blob: 65149ad44149cb8de380696dcbe6101e77fe265e [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -0400[diff] [blame]1/* SPDX-License-Identifier: GPL-2.0+ */
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +0200[diff] [blame]2/*
3 * Board configuration file for Dragonboard 410C
4 *
5 * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +0200[diff] [blame]6 */
7
8#ifndef __CONFIGS_DRAGONBOARD410C_H
9#define __CONFIGS_DRAGONBOARD410C_H
10
11#include <linux/sizes.h>
12#include <asm/arch/sysmap-apq8016.h>
13
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +0200[diff] [blame]14/* Physical Memory Map */
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +0200[diff] [blame]15#define PHYS_SDRAM_1 0x80000000
16/* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/
17#define PHYS_SDRAM_1_SIZE 0x3da00000
18#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +0200[diff] [blame]19#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
20#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)
Jorge Ramirez-Ortiz2212f632018-01-10 11:34:34 +0100[diff] [blame]21#define CONFIG_SYS_BOOTM_LEN SZ_64M
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +0200[diff] [blame]22
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +0200[diff] [blame]23/* UART */
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +0200[diff] [blame]24
25/* Generic Timer Definitions */
26#define COUNTER_FREQUENCY 19000000
27
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +0200[diff] [blame]28/* Fixup - in init code we switch from device to host mode,
29 * it has to be done after each HCD reset */
30#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
31
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +0200[diff] [blame]32/* BOOTP options */
33#define CONFIG_BOOTP_BOOTFILESIZE
34
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +0200[diff] [blame]35#define BOOT_TARGET_DEVICES(func) \
36 func(USB, usb, 0) \
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +0200[diff] [blame]37 func(MMC, mmc, 1) \
Ricardo Salveti de Araujo1ff62292016-07-03 13:59:01 -0300[diff] [blame]38 func(MMC, mmc, 0) \
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +0200[diff] [blame]39 func(DHCP, dhcp, na)
40
41#include <config_distro_bootcmd.h>
42
43/* Does what recovery does */
44#define REFLASH(file, part) \
45"part start mmc 0 "#part" start && "\
46"part size mmc 0 "#part" size && "\
47"tftp $loadaddr "#file" && " \
48"mmc write $loadaddr $start $size && "
49
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +0200[diff] [blame]50#define CONFIG_ENV_REFLASH \
51"mmc dev 0 && "\
52"usb start && "\
53"dhcp && "\
54"tftp $loadaddr dragonboard/rescue/gpt_both0.bin && "\
55"mmc write $loadaddr 0 43 && " \
56"mmc rescan && "\
57REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)\
58REFLASH(dragonboard/rescue/sbl1.mbn, 2)\
59REFLASH(dragonboard/rescue/rpm.mbn, 3)\
60REFLASH(dragonboard/rescue/tz.mbn, 4)\
61REFLASH(dragonboard/rescue/hyp.mbn, 5)\
62REFLASH(dragonboard/rescue/sec.dat, 6)\
63REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)\
64REFLASH(dragonboard/u-boot.img, 8)\
65"usb stop &&"\
66"echo Reflash completed"
67
68/* Environment */
69#define CONFIG_EXTRA_ENV_SETTINGS \
70 "reflash="CONFIG_ENV_REFLASH"\0"\
71 "loadaddr=0x81000000\0" \
72 "fdt_high=0xffffffffffffffff\0" \
73 "initrd_high=0xffffffffffffffff\0" \
74 "linux_image=Image\0" \
Andreas Färberce302982016-04-13 14:16:22 +0200[diff] [blame]75 "kernel_addr_r=0x81000000\0"\
Rob Clark7ed446a2018-01-10 11:34:40 +0100[diff] [blame]76 "fdtfile=qcom/apq8016-sbc.dtb\0" \
Andreas Färberce302982016-04-13 14:16:22 +0200[diff] [blame]77 "fdt_addr_r=0x83000000\0"\
78 "ramdisk_addr_r=0x84000000\0"\
Ricardo Salveti de Araujo88044532016-07-03 14:16:03 -0300[diff] [blame]79 "scriptaddr=0x90000000\0"\
80 "pxefile_addr_r=0x90100000\0"\
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +0200[diff] [blame]81 BOOTENV
82
Jorge Ramirez-Ortiz75a86e32017-11-06 14:16:38 +0100[diff] [blame]83#define CONFIG_SYS_MMC_ENV_DEV 0 /* mmc0 = emmc, mmc1 = sd */
Ramon Fried92a87b32018-06-14 07:04:40 +0300[diff] [blame]84#define CONFIG_SYS_MMC_ENV_PART 2 /* Set env partition to BOOT2 partition */
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +0200[diff] [blame]85
86/* Size of malloc() pool */
87#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M)
88
89/* Monitor Command Prompt */
90#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
Mateusz Kulikowskiee5e70d2016-03-31 23:12:33 +0200[diff] [blame]91#define CONFIG_SYS_MAXARGS 64 /* max command args */
92
93#endif