Ryan Chen | 0c7132a | 2023-01-30 14:19:24 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Copyright ASPEED Technology Inc. |
| 4 | */ |
| 5 | #include <common.h> |
| 6 | #include <clk.h> |
| 7 | #include <dm.h> |
| 8 | #include <errno.h> |
| 9 | #include <fdtdec.h> |
| 10 | #include <i2c.h> |
| 11 | #include <log.h> |
| 12 | #include <regmap.h> |
| 13 | #include <reset.h> |
| 14 | #include <asm/io.h> |
| 15 | #include <linux/iopoll.h> |
| 16 | #include "ast2600_i2c.h" |
| 17 | |
| 18 | /* Device private data */ |
| 19 | struct ast2600_i2c_priv { |
| 20 | struct clk clk; |
| 21 | struct ast2600_i2c_regs *regs; |
| 22 | void __iomem *global; |
| 23 | }; |
| 24 | |
| 25 | static int ast2600_i2c_read_data(struct ast2600_i2c_priv *priv, u8 chip_addr, |
| 26 | u8 *buffer, size_t len, bool send_stop) |
| 27 | { |
| 28 | int rx_cnt, ret = 0; |
| 29 | u32 cmd, isr; |
| 30 | |
| 31 | for (rx_cnt = 0; rx_cnt < len; rx_cnt++, buffer++) { |
| 32 | cmd = I2CM_PKT_EN | I2CM_PKT_ADDR(chip_addr) | |
| 33 | I2CM_RX_CMD; |
| 34 | if (!rx_cnt) |
| 35 | cmd |= I2CM_START_CMD; |
| 36 | |
| 37 | if ((len - 1) == rx_cnt) |
| 38 | cmd |= I2CM_RX_CMD_LAST; |
| 39 | |
| 40 | if (send_stop && ((len - 1) == rx_cnt)) |
| 41 | cmd |= I2CM_STOP_CMD; |
| 42 | |
| 43 | writel(cmd, &priv->regs->cmd_sts); |
| 44 | |
| 45 | ret = readl_poll_timeout(&priv->regs->isr, isr, |
| 46 | isr & I2CM_PKT_DONE, |
| 47 | I2C_TIMEOUT_US); |
| 48 | if (ret) |
| 49 | return -ETIMEDOUT; |
| 50 | |
| 51 | *buffer = |
| 52 | I2CC_GET_RX_BUFF(readl(&priv->regs->trx_buff)); |
| 53 | |
| 54 | writel(I2CM_PKT_DONE, &priv->regs->isr); |
| 55 | |
| 56 | if (isr & I2CM_TX_NAK) |
| 57 | return -EREMOTEIO; |
| 58 | } |
| 59 | |
| 60 | return 0; |
| 61 | } |
| 62 | |
| 63 | static int ast2600_i2c_write_data(struct ast2600_i2c_priv *priv, u8 chip_addr, |
| 64 | u8 *buffer, size_t len, bool send_stop) |
| 65 | { |
| 66 | int tx_cnt, ret = 0; |
| 67 | u32 cmd, isr; |
| 68 | |
| 69 | if (!len) { |
| 70 | cmd = I2CM_PKT_EN | I2CM_PKT_ADDR(chip_addr) | |
| 71 | I2CM_START_CMD; |
| 72 | writel(cmd, &priv->regs->cmd_sts); |
| 73 | ret = readl_poll_timeout(&priv->regs->isr, isr, |
| 74 | isr & I2CM_PKT_DONE, |
| 75 | I2C_TIMEOUT_US); |
| 76 | if (ret) |
| 77 | return -ETIMEDOUT; |
| 78 | |
| 79 | writel(I2CM_PKT_DONE, &priv->regs->isr); |
| 80 | |
| 81 | if (isr & I2CM_TX_NAK) |
| 82 | return -EREMOTEIO; |
| 83 | } |
| 84 | |
| 85 | for (tx_cnt = 0; tx_cnt < len; tx_cnt++, buffer++) { |
| 86 | cmd = I2CM_PKT_EN | I2CM_PKT_ADDR(chip_addr); |
| 87 | cmd |= I2CM_TX_CMD; |
| 88 | |
| 89 | if (!tx_cnt) |
| 90 | cmd |= I2CM_START_CMD; |
| 91 | |
| 92 | if (send_stop && ((len - 1) == tx_cnt)) |
| 93 | cmd |= I2CM_STOP_CMD; |
| 94 | |
| 95 | writel(*buffer, &priv->regs->trx_buff); |
| 96 | writel(cmd, &priv->regs->cmd_sts); |
| 97 | ret = readl_poll_timeout(&priv->regs->isr, isr, |
| 98 | isr & I2CM_PKT_DONE, |
| 99 | I2C_TIMEOUT_US); |
| 100 | if (ret) |
| 101 | return -ETIMEDOUT; |
| 102 | |
| 103 | writel(I2CM_PKT_DONE, &priv->regs->isr); |
| 104 | |
| 105 | if (isr & I2CM_TX_NAK) |
| 106 | return -EREMOTEIO; |
| 107 | } |
| 108 | |
| 109 | return 0; |
| 110 | } |
| 111 | |
| 112 | static int ast2600_i2c_deblock(struct udevice *dev) |
| 113 | { |
| 114 | struct ast2600_i2c_priv *priv = dev_get_priv(dev); |
| 115 | u32 csr = readl(&priv->regs->cmd_sts); |
| 116 | u32 isr; |
| 117 | int ret; |
| 118 | |
| 119 | /* reinit */ |
| 120 | writel(0, &priv->regs->fun_ctrl); |
| 121 | /* Enable Master Mode. Assuming single-master */ |
| 122 | writel(I2CC_BUS_AUTO_RELEASE | I2CC_MASTER_EN | |
| 123 | I2CC_MULTI_MASTER_DIS, |
| 124 | &priv->regs->fun_ctrl); |
| 125 | |
| 126 | csr = readl(&priv->regs->cmd_sts); |
| 127 | |
| 128 | if (!(csr & I2CC_SDA_LINE_STS) && |
| 129 | (csr & I2CC_SCL_LINE_STS)) { |
| 130 | debug("Bus stuck (%x), attempting recovery\n", csr); |
| 131 | writel(I2CM_RECOVER_CMD_EN, &priv->regs->cmd_sts); |
| 132 | ret = readl_poll_timeout(&priv->regs->isr, isr, |
| 133 | isr & (I2CM_BUS_RECOVER_FAIL | |
| 134 | I2CM_BUS_RECOVER), |
| 135 | I2C_TIMEOUT_US); |
| 136 | writel(~0, &priv->regs->isr); |
| 137 | if (ret) |
| 138 | return -EREMOTEIO; |
| 139 | } |
| 140 | |
| 141 | return 0; |
| 142 | } |
| 143 | |
| 144 | static int ast2600_i2c_xfer(struct udevice *dev, struct i2c_msg *msg, int nmsgs) |
| 145 | { |
| 146 | struct ast2600_i2c_priv *priv = dev_get_priv(dev); |
| 147 | int ret; |
| 148 | |
| 149 | if (readl(&priv->regs->trx_buff) & I2CC_BUS_BUSY_STS) |
| 150 | return -EREMOTEIO; |
| 151 | |
| 152 | for (; nmsgs > 0; nmsgs--, msg++) { |
| 153 | if (msg->flags & I2C_M_RD) { |
| 154 | debug("i2c_read: chip=0x%x, len=0x%x, flags=0x%x\n", |
| 155 | msg->addr, msg->len, msg->flags); |
| 156 | ret = ast2600_i2c_read_data(priv, msg->addr, msg->buf, |
| 157 | msg->len, (nmsgs == 1)); |
| 158 | } else { |
| 159 | debug("i2c_write: chip=0x%x, len=0x%x, flags=0x%x\n", |
| 160 | msg->addr, msg->len, msg->flags); |
| 161 | ret = ast2600_i2c_write_data(priv, msg->addr, msg->buf, |
| 162 | msg->len, (nmsgs == 1)); |
| 163 | } |
| 164 | if (ret) { |
| 165 | debug("%s: error (%d)\n", __func__, ret); |
| 166 | return -EREMOTEIO; |
| 167 | } |
| 168 | } |
| 169 | |
| 170 | return 0; |
| 171 | } |
| 172 | |
| 173 | static int ast2600_i2c_set_speed(struct udevice *dev, unsigned int speed) |
| 174 | { |
| 175 | struct ast2600_i2c_priv *priv = dev_get_priv(dev); |
| 176 | unsigned long base_clk1, base_clk2, base_clk3, base_clk4; |
| 177 | int multiply = 10; |
| 178 | int baseclk_idx; |
| 179 | u32 clk_div_reg; |
| 180 | u32 apb_clk; |
| 181 | u32 scl_low; |
| 182 | u32 scl_high; |
| 183 | int divisor; |
| 184 | int inc = 0; |
| 185 | u32 data; |
| 186 | |
| 187 | debug("Setting speed for I2C%d to <%u>\n", dev->seq_, speed); |
| 188 | if (!speed) { |
| 189 | debug("No valid speed specified\n"); |
| 190 | return -EINVAL; |
| 191 | } |
| 192 | |
| 193 | apb_clk = clk_get_rate(&priv->clk); |
| 194 | |
| 195 | clk_div_reg = readl(priv->global + I2CG_CLK_DIV_CTRL); |
| 196 | |
| 197 | base_clk1 = (apb_clk * multiply) / (((GET_CLK1_DIV(clk_div_reg) + 2) * multiply) / 2); |
| 198 | base_clk2 = (apb_clk * multiply) / (((GET_CLK2_DIV(clk_div_reg) + 2) * multiply) / 2); |
| 199 | base_clk3 = (apb_clk * multiply) / (((GET_CLK3_DIV(clk_div_reg) + 2) * multiply) / 2); |
| 200 | base_clk4 = (apb_clk * multiply) / (((GET_CLK4_DIV(clk_div_reg) + 2) * multiply) / 2); |
| 201 | |
| 202 | if ((apb_clk / speed) <= 32) { |
| 203 | baseclk_idx = 0; |
| 204 | divisor = DIV_ROUND_UP(apb_clk, speed); |
| 205 | } else if ((base_clk1 / speed) <= 32) { |
| 206 | baseclk_idx = 1; |
| 207 | divisor = DIV_ROUND_UP(base_clk1, speed); |
| 208 | } else if ((base_clk2 / speed) <= 32) { |
| 209 | baseclk_idx = 2; |
| 210 | divisor = DIV_ROUND_UP(base_clk2, speed); |
| 211 | } else if ((base_clk3 / speed) <= 32) { |
| 212 | baseclk_idx = 3; |
| 213 | divisor = DIV_ROUND_UP(base_clk3, speed); |
| 214 | } else { |
| 215 | baseclk_idx = 4; |
| 216 | divisor = DIV_ROUND_UP(base_clk4, speed); |
| 217 | inc = 0; |
| 218 | while ((divisor + inc) > 32) { |
| 219 | inc |= divisor & 0x1; |
| 220 | divisor >>= 1; |
| 221 | baseclk_idx++; |
| 222 | } |
| 223 | divisor += inc; |
| 224 | } |
| 225 | divisor = min_t(int, divisor, 32); |
| 226 | baseclk_idx &= 0xf; |
| 227 | scl_low = ((divisor * 9) / 16) - 1; |
| 228 | scl_low = min_t(u32, scl_low, 0xf); |
| 229 | scl_high = (divisor - scl_low - 2) & 0xf; |
| 230 | /* Divisor : Base Clock : tCKHighMin : tCK High : tCK Low */ |
| 231 | data = ((scl_high - 1) << 20) | (scl_high << 16) | (scl_low << 12) | |
| 232 | baseclk_idx; |
| 233 | /* Set AC Timing */ |
| 234 | writel(data, &priv->regs->ac_timing); |
| 235 | |
| 236 | return 0; |
| 237 | } |
| 238 | |
| 239 | static int ast2600_i2c_probe(struct udevice *dev) |
| 240 | { |
| 241 | struct ast2600_i2c_priv *priv = dev_get_priv(dev); |
| 242 | ofnode i2c_global_node; |
| 243 | |
| 244 | /* find global base address */ |
| 245 | i2c_global_node = ofnode_get_parent(dev_ofnode(dev)); |
| 246 | priv->global = (void *)ofnode_get_addr(i2c_global_node); |
| 247 | if (IS_ERR(priv->global)) { |
| 248 | debug("%s(): can't get global\n", __func__); |
| 249 | return PTR_ERR(priv->global); |
| 250 | } |
| 251 | |
| 252 | /* Reset device */ |
| 253 | writel(0, &priv->regs->fun_ctrl); |
| 254 | /* Enable Master Mode. Assuming single-master */ |
| 255 | writel(I2CC_BUS_AUTO_RELEASE | I2CC_MASTER_EN | |
| 256 | I2CC_MULTI_MASTER_DIS, |
| 257 | &priv->regs->fun_ctrl); |
| 258 | |
| 259 | writel(0, &priv->regs->ier); |
| 260 | /* Clear Interrupt */ |
| 261 | writel(~0, &priv->regs->isr); |
| 262 | |
| 263 | return 0; |
| 264 | } |
| 265 | |
| 266 | static int ast2600_i2c_of_to_plat(struct udevice *dev) |
| 267 | { |
| 268 | struct ast2600_i2c_priv *priv = dev_get_priv(dev); |
| 269 | int ret; |
| 270 | |
| 271 | priv->regs = dev_read_addr_ptr(dev); |
| 272 | if (!priv->regs) |
| 273 | return -EINVAL; |
| 274 | |
| 275 | ret = clk_get_by_index(dev, 0, &priv->clk); |
| 276 | if (ret < 0) { |
| 277 | debug("%s: Can't get clock for %s: %d\n", __func__, dev->name, |
| 278 | ret); |
| 279 | return ret; |
| 280 | } |
| 281 | |
| 282 | return 0; |
| 283 | } |
| 284 | |
| 285 | static const struct dm_i2c_ops ast2600_i2c_ops = { |
| 286 | .xfer = ast2600_i2c_xfer, |
| 287 | .deblock = ast2600_i2c_deblock, |
| 288 | .set_bus_speed = ast2600_i2c_set_speed, |
| 289 | }; |
| 290 | |
| 291 | static const struct udevice_id ast2600_i2c_ids[] = { |
| 292 | { .compatible = "aspeed,ast2600-i2c" }, |
| 293 | {}, |
| 294 | }; |
| 295 | |
| 296 | U_BOOT_DRIVER(ast2600_i2c) = { |
| 297 | .name = "ast2600_i2c", |
| 298 | .id = UCLASS_I2C, |
| 299 | .of_match = ast2600_i2c_ids, |
| 300 | .probe = ast2600_i2c_probe, |
| 301 | .of_to_plat = ast2600_i2c_of_to_plat, |
| 302 | .priv_auto = sizeof(struct ast2600_i2c_priv), |
| 303 | .ops = &ast2600_i2c_ops, |
| 304 | }; |
| 305 | |
| 306 | struct ast2600_i2c_global_priv { |
| 307 | void __iomem *regs; |
| 308 | struct reset_ctl reset; |
| 309 | }; |
| 310 | |
| 311 | /* |
| 312 | * APB clk : 100Mhz |
| 313 | * div : scl : baseclk [APB/((div/2) + 1)] : tBuf [1/bclk * 16] |
| 314 | * I2CG10[31:24] base clk4 for i2c auto recovery timeout counter (0xC6) |
| 315 | * I2CG10[23:16] base clk3 for Standard-mode (100Khz) min tBuf 4.7us |
| 316 | * 0x3c : 100.8Khz : 3.225Mhz : 4.96us |
| 317 | * 0x3d : 99.2Khz : 3.174Mhz : 5.04us |
| 318 | * 0x3e : 97.65Khz : 3.125Mhz : 5.12us |
| 319 | * 0x40 : 97.75Khz : 3.03Mhz : 5.28us |
| 320 | * 0x41 : 99.5Khz : 2.98Mhz : 5.36us (default) |
| 321 | * I2CG10[15:8] base clk2 for Fast-mode (400Khz) min tBuf 1.3us |
| 322 | * 0x12 : 400Khz : 10Mhz : 1.6us |
| 323 | * I2CG10[7:0] base clk1 for Fast-mode Plus (1Mhz) min tBuf 0.5us |
| 324 | * 0x08 : 1Mhz : 20Mhz : 0.8us |
| 325 | */ |
| 326 | |
| 327 | static int aspeed_i2c_global_probe(struct udevice *dev) |
| 328 | { |
| 329 | struct ast2600_i2c_global_priv *i2c_global = dev_get_priv(dev); |
| 330 | void __iomem *regs; |
| 331 | int ret = 0; |
| 332 | |
| 333 | i2c_global->regs = dev_read_addr_ptr(dev); |
| 334 | if (!i2c_global->regs) |
| 335 | return -EINVAL; |
| 336 | |
| 337 | debug("%s(dev=%p)\n", __func__, dev); |
| 338 | |
| 339 | regs = i2c_global->regs; |
| 340 | |
| 341 | ret = reset_get_by_index(dev, 0, &i2c_global->reset); |
| 342 | if (ret) { |
| 343 | printf("%s(): Failed to get reset signal\n", __func__); |
| 344 | return ret; |
| 345 | } |
| 346 | |
| 347 | reset_deassert(&i2c_global->reset); |
| 348 | |
| 349 | writel(GLOBAL_INIT, regs + I2CG_CTRL); |
| 350 | writel(I2CCG_DIV_CTRL, regs + I2CG_CLK_DIV_CTRL); |
| 351 | |
| 352 | return 0; |
| 353 | } |
| 354 | |
| 355 | static const struct udevice_id aspeed_i2c_global_ids[] = { |
| 356 | { .compatible = "aspeed,ast2600-i2c-global", }, |
| 357 | { } |
| 358 | }; |
| 359 | |
| 360 | U_BOOT_DRIVER(aspeed_i2c_global) = { |
| 361 | .name = "aspeed_i2c_global", |
| 362 | .id = UCLASS_MISC, |
| 363 | .of_match = aspeed_i2c_global_ids, |
| 364 | .probe = aspeed_i2c_global_probe, |
| 365 | .priv_auto = sizeof(struct ast2600_i2c_global_priv), |
| 366 | }; |