blob: ce1b89db422e504dfb832b1288101adfaeed9a6c [file] [log] [blame]
Steve Rae45f2c702016-06-02 15:10:56 -07001/*
2 * Copyright 2013 Broadcom Corporation.
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7#ifndef __BCM23550_W1D_H
8#define __BCM23550_W1D_H
9
10#include <linux/sizes.h>
11#include <asm/arch/sysmap.h>
12
13/* CPU, chip, mach, etc */
14#define CONFIG_KONA
15#define CONFIG_SKIP_LOWLEVEL_INIT
16#define CONFIG_KONA_RESET_S
17
18/*
19 * Memory configuration
20 */
21#define CONFIG_SYS_TEXT_BASE 0x9f000000
22
23#define CONFIG_SYS_SDRAM_BASE 0x80000000
24#define CONFIG_SYS_SDRAM_SIZE 0x20000000
25#define CONFIG_NR_DRAM_BANKS 1
26
27#define CONFIG_SYS_MALLOC_LEN SZ_4M /* see armv7/start.S. */
28#define CONFIG_STACKSIZE SZ_256K
29
30/* GPIO Driver */
31#define CONFIG_KONA_GPIO
32
33/* MMC/SD Driver */
Steve Rae45f2c702016-06-02 15:10:56 -070034#define CONFIG_SYS_SDIO_BASE0 SDIO1_BASE_ADDR
35#define CONFIG_SYS_SDIO_BASE1 SDIO2_BASE_ADDR
36#define CONFIG_SYS_SDIO_BASE2 SDIO3_BASE_ADDR
37#define CONFIG_SYS_SDIO_BASE3 SDIO4_BASE_ADDR
38#define CONFIG_SYS_SDIO0_MAX_CLK 48000000
39#define CONFIG_SYS_SDIO1_MAX_CLK 48000000
40#define CONFIG_SYS_SDIO2_MAX_CLK 48000000
41#define CONFIG_SYS_SDIO3_MAX_CLK 48000000
42#define CONFIG_SYS_SDIO0 "sdio1"
43#define CONFIG_SYS_SDIO1 "sdio2"
44#define CONFIG_SYS_SDIO2 "sdio3"
45#define CONFIG_SYS_SDIO3 "sdio4"
46
47/* I2C Driver */
48#define CONFIG_SYS_I2C
49#define CONFIG_SYS_I2C_KONA
50#define CONFIG_SYS_SPD_BUS_NUM 3 /* Start with PMU bus */
51#define CONFIG_SYS_MAX_I2C_BUS 4
52#define CONFIG_SYS_I2C_BASE0 BSC1_BASE_ADDR
53#define CONFIG_SYS_I2C_BASE1 BSC2_BASE_ADDR
54#define CONFIG_SYS_I2C_BASE2 BSC3_BASE_ADDR
55#define CONFIG_SYS_I2C_BASE3 PMU_BSC_BASE_ADDR
56
57/* Timer Driver */
58#define CONFIG_SYS_TIMER_RATE 32000
59#define CONFIG_SYS_TIMER_COUNTER (TIMER_BASE_ADDR + 4) /* STCLO offset */
60
61/* Init functions */
62#define CONFIG_MISC_INIT_R /* board's misc_init_r function */
63
64/* Some commands use this as the default load address */
65#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
66
67/* No mtest functions as recommended */
68
69/*
70 * This is the initial SP which is used only briefly for relocating the u-boot
71 * image to the top of SDRAM. After relocation u-boot moves the stack to the
72 * proper place.
73 */
74#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
75
76/* Serial Info */
77#define CONFIG_SYS_NS16550_SERIAL
78/* Post pad 3 bytes after each reg addr */
79#define CONFIG_SYS_NS16550_REG_SIZE (-4)
80#define CONFIG_SYS_NS16550_CLK 13000000
81#define CONFIG_CONS_INDEX 1
82#define CONFIG_SYS_NS16550_COM1 0x3e000000
83
84#define CONFIG_BAUDRATE 115200
85
86/* must fit into GPT:u-boot-env partition */
87#define CONFIG_ENV_IS_IN_MMC
88#define CONFIG_SYS_MMC_ENV_DEV 0
89#define CONFIG_ENV_OFFSET (0x00011a00 * 512)
90#define CONFIG_ENV_SIZE (8 * 512)
91
Steve Rae45f2c702016-06-02 15:10:56 -070092/* console configuration */
93#define CONFIG_SYS_CBSIZE 1024 /* Console buffer size */
94#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
95 sizeof(CONFIG_SYS_PROMPT) + 16) /* Printbuffer size */
96#define CONFIG_SYS_MAXARGS 64
97#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
98
99/*
100 * One partition type must be defined for part.c
101 * This is necessary for the fatls command to work on an SD card
102 * for example.
103 */
Steve Rae45f2c702016-06-02 15:10:56 -0700104
105/* version string, parser, etc */
Steve Rae45f2c702016-06-02 15:10:56 -0700106#define CONFIG_AUTO_COMPLETE
107#define CONFIG_CMDLINE_EDITING
108#define CONFIG_SYS_LONGHELP
109
110#define CONFIG_CRC32_VERIFY
111#define CONFIG_MX_CYCLIC
112
113/* Initial upstream - boot to cmd prompt only */
114#define CONFIG_BOOTCOMMAND ""
115
116/* Commands */
117#define CONFIG_FAT_WRITE
118
Steve Rae45f2c702016-06-02 15:10:56 -0700119#undef CONFIG_USB_GADGET_VBUS_DRAW
120#define CONFIG_USB_GADGET_VBUS_DRAW 0
Steve Rae45f2c702016-06-02 15:10:56 -0700121#define CONFIG_USBID_ADDR 0x34052c46
122
123#define CONFIG_SYS_ICACHE_OFF
124#define CONFIG_SYS_DCACHE_OFF
125#define CONFIG_SYS_L2CACHE_OFF
126
127#endif /* __BCM23550_W1D_H */