blob: d84554e37dc73aa6e3d5cb8bc74775e1459b4648 [file] [log] [blame]
Stefan Roese09554022005-11-30 13:06:40 +01001/*
Wolfgang Grandegger328c6ec2008-06-05 13:12:07 +02002 * (C) Copyright 2007
3 * Thomas Waehner, TQ-System GmbH, thomas.waehner@tqs.de.
4 *
Stefan Roese09554022005-11-30 13:06:40 +01005 * (C) Copyright 2005
6 * Stefan Roese, DENX Software Engineering, sr@denx.de.
7 *
8 * Wolfgang Denk <wd@denx.de>
9 * Copyright 2004 Freescale Semiconductor.
10 * (C) Copyright 2002,2003 Motorola,Inc.
11 * Xianghua Xiao <X.Xiao@motorola.com>
12 *
13 * See file CREDITS for list of people who contributed to this
14 * project.
15 *
16 * This program is free software; you can redistribute it and/or
17 * modify it under the terms of the GNU General Public License as
18 * published by the Free Software Foundation; either version 2 of
19 * the License, or (at your option) any later version.
20 *
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
25 *
26 * You should have received a copy of the GNU General Public License
27 * along with this program; if not, write to the Free Software
28 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
29 * MA 02111-1307 USA
30 */
31
32/*
Wolfgang Grandegger328c6ec2008-06-05 13:12:07 +020033 * TQM85xx (8560/40/55/41/48) board configuration file
Stefan Roese09554022005-11-30 13:06:40 +010034 */
35
36#ifndef __CONFIG_H
37#define __CONFIG_H
38
39/* High Level Configuration Options */
40#define CONFIG_BOOKE 1 /* BOOKE */
41#define CONFIG_E500 1 /* BOOKE e500 family */
42#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */
43
44#define CONFIG_PCI
Wolfgang Grandegger8754a972008-06-05 13:12:08 +020045#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
46#define CONFIG_PCIX_CHECK /* PCIX olny works at 66 MHz */
47#ifdef CONFIG_TQM8548
48#define CONFIG_PCI1
49#define CONFIG_PCIE1
50#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
51#endif
52
Stefan Roese09554022005-11-30 13:06:40 +010053#define CONFIG_TSEC_ENET /* tsec ethernet support */
54
55#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
56
Wolfgang Grandeggerba08f5d2008-06-05 13:12:10 +020057 /*
58 * Configuration for big NOR Flashes
59 *
60 * Define CONFIG_TQM_BIGFLASH for boards with more than 128 MiB NOR Flash.
61 * Please be aware, that this changes the whole memory map (new CCSRBAR
62 * address, etc). You have to use an adapted Linux kernel or FDT blob
63 * if this option is set.
64 */
65#undef CONFIG_TQM_BIGFLASH
66
Stefan Roese09554022005-11-30 13:06:40 +010067/*
Wolfgang Grandegger2aca6452008-06-05 13:12:09 +020068 * NAND flash support (disabled by default)
69 *
70 * Warning: NAND support will likely increase the U-Boot image size
71 * to more than 256 KB. Please adjust TEXT_BASE if necessary.
72 */
73#undef CONFIG_NAND
74
75/*
Wolfgang Grandegger328c6ec2008-06-05 13:12:07 +020076 * MPC8540 and MPC8548 don't have CPM module
Stefan Roese09554022005-11-30 13:06:40 +010077 */
Wolfgang Grandegger328c6ec2008-06-05 13:12:07 +020078#if !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8548)
Stefan Roese09554022005-11-30 13:06:40 +010079#define CONFIG_CPM2 1 /* has CPM2 */
80#endif
81
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +020082#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
Kumar Gala92c512a2008-01-16 09:15:29 -060083
Wolfgang Grandeggerc5809d72008-06-05 13:12:05 +020084#undef CONFIG_CAN_DRIVER /* CAN Driver support */
85
Stefan Roese09554022005-11-30 13:06:40 +010086/*
87 * sysclk for MPC85xx
88 *
89 * Two valid values are:
Wolfgang Grandegger328c6ec2008-06-05 13:12:07 +020090 * 33333333
91 * 66666666
Stefan Roese09554022005-11-30 13:06:40 +010092 *
93 * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
94 * is likely the desired value here, so that is now the default.
95 * The board, however, can run at 66MHz. In any event, this value
96 * must match the settings of some switches. Details can be found
97 * in the README.mpc85xxads.
98 */
99
100#ifndef CONFIG_SYS_CLK_FREQ
101#define CONFIG_SYS_CLK_FREQ 33333333
102#endif
103
104/*
105 * These can be toggled for performance analysis, otherwise use default.
106 */
107#define CONFIG_L2_CACHE /* toggle L2 cache */
108#define CONFIG_BTB /* toggle branch predition */
109#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
110
111#define CFG_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */
112
113#undef CFG_DRAM_TEST /* memory test, takes time */
114#define CFG_MEMTEST_START 0x00000000
115#define CFG_MEMTEST_END 0x10000000
116
117/*
118 * Base addresses -- Note these are effective addresses where the
119 * actual resources get mapped (not physical addresses)
120 */
121#define CFG_CCSRBAR_DEFAULT 0xFF700000 /* CCSRBAR Default */
Wolfgang Grandeggerba08f5d2008-06-05 13:12:10 +0200122#ifdef CONFIG_TQM_BIGFLASH
123#define CFG_CCSRBAR 0xA0000000 /* relocated CCSRBAR */
124#else /* !CONFIG_TQM_BIGFLASH */
Stefan Roese09554022005-11-30 13:06:40 +0100125#define CFG_CCSRBAR 0xE0000000 /* relocated CCSRBAR */
Wolfgang Grandeggerba08f5d2008-06-05 13:12:10 +0200126#endif /* CONFIG_TQM_BIGFLASH */
Kumar Galad33a55f2008-01-30 14:55:14 -0600127#define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */
Stefan Roese09554022005-11-30 13:06:40 +0100128#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
129
Wolfgang Grandegger8754a972008-06-05 13:12:08 +0200130#define CFG_PCI1_ADDR (CFG_CCSRBAR + 0x8000)
131#define CFG_PCI2_ADDR (CFG_CCSRBAR + 0x9000)
132#define CFG_PCIE1_ADDR (CFG_CCSRBAR + 0xa000)
133
Stefan Roese09554022005-11-30 13:06:40 +0100134/*
135 * DDR Setup
136 */
137#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */
138#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
Stefan Roese09554022005-11-30 13:06:40 +0100139
140#if defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560)
141/* TQM8540 & 8560 need DLL-override */
142#define CONFIG_DDR_DLL /* DLL fix needed */
143#define CONFIG_DDR_DEFAULT_CL 25 /* CAS latency 2,5 */
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200144#endif /* CONFIG_TQM8540 || CONFIG_TQM8560 */
Stefan Roese09554022005-11-30 13:06:40 +0100145
Wolfgang Grandegger328c6ec2008-06-05 13:12:07 +0200146#if defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555) || \
147 defined(CONFIG_TQM8548)
Stefan Roese09554022005-11-30 13:06:40 +0100148#define CONFIG_DDR_DEFAULT_CL 30 /* CAS latency 3 */
Wolfgang Grandegger328c6ec2008-06-05 13:12:07 +0200149#endif /* CONFIG_TQM8541 || CONFIG_TQM8555 || CONFIG_TQM8548 */
Stefan Roese09554022005-11-30 13:06:40 +0100150
151/*
Wolfgang Grandegger383c0ab2008-06-05 13:12:02 +0200152 * Old TQM85xx boards have 'M' type Spansion Flashes from the S29GLxxxM
153 * series while new boards have 'N' type Flashes from the S29GLxxxN
154 * series, which have bigger sectors: 2 x 128 instead of 2 x 64 KB.
155 */
Wolfgang Grandegger328c6ec2008-06-05 13:12:07 +0200156#ifdef CONFIG_TQM8548
157#define CONFIG_TQM_FLASH_N_TYPE
158#endif /* CONFIG_TQM8548 */
Wolfgang Grandegger383c0ab2008-06-05 13:12:02 +0200159
160/*
Stefan Roese09554022005-11-30 13:06:40 +0100161 * Flash on the Local Bus
162 */
Wolfgang Grandeggerba08f5d2008-06-05 13:12:10 +0200163#ifdef CONFIG_TQM_BIGFLASH
164#define CFG_FLASH0 0xE0000000
165#define CFG_FLASH1 0xC0000000
166#else /* !CONFIG_TQM_BIGFLASH */
Stefan Roese09554022005-11-30 13:06:40 +0100167#define CFG_FLASH0 0xFC000000
168#define CFG_FLASH1 0xF8000000
Wolfgang Grandeggerba08f5d2008-06-05 13:12:10 +0200169#endif /* CONFIG_TQM_BIGFLASH */
Stefan Roese09554022005-11-30 13:06:40 +0100170#define CFG_FLASH_BANKS_LIST { CFG_FLASH1, CFG_FLASH0 }
171
172#define CFG_LBC_FLASH_BASE CFG_FLASH1 /* Localbus flash start */
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200173#define CFG_FLASH_BASE CFG_LBC_FLASH_BASE /* start of FLASH */
Stefan Roese09554022005-11-30 13:06:40 +0100174
Wolfgang Grandegger328c6ec2008-06-05 13:12:07 +0200175/* Default ORx timings are for <= 41.7 MHz Local Bus Clock.
176 *
177 * Note: According to timing specifications external addr latch delay
178 * (EAD, bit #0) must be set if Local Bus Clock is > 83 MHz.
179 *
180 * For other Local Bus Clocks see following table:
181 *
182 * Clock/MHz CFG_ORx_PRELIM
183 * 166 0x.....CA5
184 * 133 0x.....C85
185 * 100 0x.....C65
186 * 83 0x.....FA2
187 * 66 0x.....C82
188 * 50 0x.....C60
189 * 42 0x.....040
190 * 33 0x.....030
191 * 25 0x.....020
192 *
193 */
Wolfgang Grandeggerba08f5d2008-06-05 13:12:10 +0200194#ifdef CONFIG_TQM_BIGFLASH
195#define CFG_BR0_PRELIM 0xE0001801 /* port size 32bit */
196#define CFG_OR0_PRELIM 0xE0000040 /* 512MB Flash */
197#define CFG_BR1_PRELIM 0xC0001801 /* port size 32bit */
198#define CFG_OR1_PRELIM 0xE0000040 /* 512MB Flash */
199#else /* !CONFIG_TQM_BIGFLASH */
Stefan Roese09554022005-11-30 13:06:40 +0100200#define CFG_BR0_PRELIM 0xfc001801 /* port size 32bit */
201#define CFG_OR0_PRELIM 0xfc000040 /* 64MB Flash */
202#define CFG_BR1_PRELIM 0xf8001801 /* port size 32bit */
203#define CFG_OR1_PRELIM 0xfc000040 /* 64MB Flash */
Wolfgang Grandeggerba08f5d2008-06-05 13:12:10 +0200204#endif /* CONFIG_TQM_BIGFLASH */
Stefan Roese09554022005-11-30 13:06:40 +0100205
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200206#define CFG_FLASH_CFI /* flash is CFI compat. */
Jean-Christophe PLAGNIOL-VILLARD8d94c232008-08-13 01:40:42 +0200207#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
Stefan Roese09554022005-11-30 13:06:40 +0100208#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector */
209#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash*/
Wolfgang Grandegger328c6ec2008-06-05 13:12:07 +0200210#define CFG_FLASH_USE_BUFFER_WRITE 1 /* speed up output to Flash */
Stefan Roese09554022005-11-30 13:06:40 +0100211
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200212#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
213#define CFG_MAX_FLASH_SECT 512 /* sectors per device */
Stefan Roese09554022005-11-30 13:06:40 +0100214#undef CFG_FLASH_CHECKSUM
215#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
216#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
217
218#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
219
Wolfgang Grandegger328c6ec2008-06-05 13:12:07 +0200220/*
221 * Note: when changing the Local Bus clock divider you have to
222 * change the timing values in CFG_ORx_PRELIM.
223 *
224 * LCRR[00:03] CLKDIV: System (CCB) clock divider. Valid values are 2, 4, 8.
225 * LCRR[16:17] EADC : External address delay cycles. It should be set to 2
226 * for Local Bus Clock > 83.3 MHz.
227 */
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200228#define CFG_LBC_LCRR 0x00030008 /* LB clock ratio reg */
229#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
230#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
231#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer presc.*/
Stefan Roese09554022005-11-30 13:06:40 +0100232
233#define CONFIG_L1_INIT_RAM
234#define CFG_INIT_RAM_LOCK 1
Wolfgang Grandeggerba08f5d2008-06-05 13:12:10 +0200235#define CFG_INIT_RAM_ADDR (CFG_CCSRBAR \
236 + 0x04010000) /* Initial RAM address */
Stefan Roese09554022005-11-30 13:06:40 +0100237#define CFG_INIT_RAM_END 0x4000 /* End used area in RAM */
238
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200239#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
Stefan Roese09554022005-11-30 13:06:40 +0100240#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
241#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
242
Wolfgang Grandegger2aca6452008-06-05 13:12:09 +0200243#define CFG_MONITOR_LEN (~TEXT_BASE + 1)/* Reserved for Monitor */
244#define CFG_MALLOC_LEN (384 * 1024) /* Reserved for malloc */
Stefan Roese09554022005-11-30 13:06:40 +0100245
246/* Serial Port */
247#if defined(CONFIG_TQM8560)
248
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200249#define CONFIG_CONS_ON_SCC /* define if console on SCC */
250#undef CONFIG_CONS_NONE /* define if console on something else */
251#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
Stefan Roese09554022005-11-30 13:06:40 +0100252
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200253#else /* !CONFIG_TQM8560 */
Stefan Roese09554022005-11-30 13:06:40 +0100254
255#define CONFIG_CONS_INDEX 1
256#undef CONFIG_SERIAL_SOFTWARE_FIFO
257#define CFG_NS16550
258#define CFG_NS16550_SERIAL
259#define CFG_NS16550_REG_SIZE 1
260#define CFG_NS16550_CLK get_bus_freq(0)
261
262#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
263#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
264
Wolfgang Denk12168852006-06-16 16:40:54 +0200265/* PS/2 Keyboard */
266#define CONFIG_PS2KBD /* AT-PS/2 Keyboard */
267#define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */
268#define CONFIG_PS2SERIAL 2 /* .. on DUART2 */
269#define CONFIG_PS2MULT_DELAY (CFG_HZ/2) /* Initial delay */
270#define CONFIG_BOARD_EARLY_INIT_R 1
271
Wolfgang Denk31560d12006-07-21 15:24:56 +0200272#endif /* CONFIG_TQM8560 */
273
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200274#define CONFIG_BAUDRATE 115200
Wolfgang Denk31560d12006-07-21 15:24:56 +0200275
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200276#define CFG_BAUDRATE_TABLE \
277 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
Wolfgang Denk31560d12006-07-21 15:24:56 +0200278
Wolfgang Denk274bac52006-10-28 02:29:14 +0200279#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
280#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */
Stefan Roese09554022005-11-30 13:06:40 +0100281#ifdef CFG_HUSH_PARSER
Wolfgang Denk274bac52006-10-28 02:29:14 +0200282#define CFG_PROMPT_HUSH_PS2 "> "
Stefan Roese09554022005-11-30 13:06:40 +0100283#endif
284
Wolfgang Grandeggerf5be52d2008-06-05 13:12:06 +0200285/* pass open firmware flat tree */
286#define CONFIG_OF_LIBFDT 1
287#define CONFIG_OF_BOARD_SETUP 1
288#define CONFIG_OF_STDOUT_VIA_ALIAS 1
289
Wolfgang Grandeggerc5809d72008-06-05 13:12:05 +0200290/* CAN */
Wolfgang Grandeggerba08f5d2008-06-05 13:12:10 +0200291#define CFG_CAN_BASE (CFG_CCSRBAR \
292 + 0x03000000) /* CAN base address */
Wolfgang Grandegger2aca6452008-06-05 13:12:09 +0200293#ifdef CONFIG_CAN_DRIVER
Wolfgang Grandeggerc5809d72008-06-05 13:12:05 +0200294#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 KiB address mask */
295#define CFG_OR2_CAN (CFG_CAN_OR_AM | OR_UPM_BI)
296#define CFG_BR2_CAN ((CFG_CAN_BASE & BR_BA) | \
297 BR_PS_8 | BR_MS_UPMC | BR_V)
298#endif /* CONFIG_CAN_DRIVER */
299
Jon Loeliger43d818f2006-10-20 15:50:15 -0500300/*
301 * I2C
302 */
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200303#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
Stefan Roese09554022005-11-30 13:06:40 +0100304#define CONFIG_HARD_I2C /* I2C with hardware support */
305#undef CONFIG_SOFT_I2C /* I2C bit-banged */
306#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
307#define CFG_I2C_SLAVE 0x7F
308#define CFG_I2C_NOPROBES {0x48} /* Don't probe these addrs */
Jon Loeliger43d818f2006-10-20 15:50:15 -0500309#define CFG_I2C_OFFSET 0x3000
Stefan Roese09554022005-11-30 13:06:40 +0100310
311/* I2C RTC */
312#define CONFIG_RTC_DS1337 /* Use ds1337 rtc via i2c */
313#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
314
315/* I2C EEPROM */
316/*
317 * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work also).
318 */
319#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */
320#define CFG_I2C_EEPROM_ADDR_LEN 2
321#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
322#define CFG_EEPROM_PAGE_WRITE_ENABLE
323#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200324#define CFG_I2C_MULTI_EEPROMS 1 /* more than one eeprom */
Stefan Roese09554022005-11-30 13:06:40 +0100325
326/* I2C SYSMON (LM75) */
327#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
328#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
329#define CFG_DTT_MAX_TEMP 70
330#define CFG_DTT_LOW_TEMP -30
331#define CFG_DTT_HYSTERESIS 3
332
Wolfgang Grandegger8754a972008-06-05 13:12:08 +0200333#ifndef CONFIG_PCIE1
Stefan Roese09554022005-11-30 13:06:40 +0100334/* RapidIO MMU */
Wolfgang Grandeggerba08f5d2008-06-05 13:12:10 +0200335#ifdef CONFIG_TQM_BIGFLASH
336#define CFG_RIO_MEM_BASE 0xb0000000 /* base address */
337#define CFG_RIO_MEM_SIZE 0x10000000 /* 256M */
338#else /* !CONFIG_TQM_BIGFLASH */
Stefan Roese09554022005-11-30 13:06:40 +0100339#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */
Wolfgang Grandegger8754a972008-06-05 13:12:08 +0200340#define CFG_RIO_MEM_SIZE 0x20000000 /* 512M */
Wolfgang Grandeggerba08f5d2008-06-05 13:12:10 +0200341#endif /* CONFIG_TQM_BIGFLASH */
342#define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE
Wolfgang Grandegger8754a972008-06-05 13:12:08 +0200343#endif /* CONFIG_PCIE1 */
Stefan Roese09554022005-11-30 13:06:40 +0100344
Wolfgang Grandegger2aca6452008-06-05 13:12:09 +0200345/* NAND FLASH */
346#ifdef CONFIG_NAND
347
Jean-Christophe PLAGNIOL-VILLARD719bb5f2008-08-13 01:40:43 +0200348#undef CONFIG_NAND_LEGACY
Wolfgang Grandegger2aca6452008-06-05 13:12:09 +0200349
350#define CONFIG_NAND_FSL_UPM 1
351
352#define CONFIG_MTD_NAND_ECC_JFFS2 1 /* use JFFS2 ECC */
353
354/* address distance between chip selects */
355#define CFG_NAND_SELECT_DEVICE 1
356#define CFG_NAND_CS_DIST 0x200
357
358#define CFG_NAND_SIZE 0x8000
Wolfgang Grandeggerba08f5d2008-06-05 13:12:10 +0200359#define CFG_NAND0_BASE (CFG_CCSRBAR + 0x03010000)
Wolfgang Grandegger2aca6452008-06-05 13:12:09 +0200360#define CFG_NAND1_BASE (CFG_NAND0_BASE + CFG_NAND_CS_DIST)
361#define CFG_NAND2_BASE (CFG_NAND1_BASE + CFG_NAND_CS_DIST)
362#define CFG_NAND3_BASE (CFG_NAND2_BASE + CFG_NAND_CS_DIST)
363
364#define CFG_MAX_NAND_DEVICE 2 /* Max number of NAND devices */
365#define NAND_MAX_CHIPS 1
366
367#if (CFG_MAX_NAND_DEVICE == 1)
368#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE }
369#elif (CFG_MAX_NAND_DEVICE == 2)
370#define CFG_NAND_QUIET_TEST 1
371#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, \
372 CFG_NAND1_BASE, \
373}
374#elif (CFG_MAX_NAND_DEVICE == 4)
375#define CFG_NAND_QUIET_TEST 1
376#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, \
377 CFG_NAND1_BASE, \
378 CFG_NAND2_BASE, \
379 CFG_NAND3_BASE, \
380}
381#endif
382
383/* CS3 for NAND Flash */
384#define CFG_BR3_PRELIM ((CFG_NAND0_BASE & BR_BA) | BR_PS_8 | \
385 BR_MS_UPMB | BR_V)
386#define CFG_OR3_PRELIM (P2SZ_TO_AM(CFG_NAND_SIZE) | OR_UPM_BI)
387
388#define NAND_BIG_DELAY_US 25 /* max tR for Samsung devices */
389
390#endif /* CONFIG_NAND */
391
Stefan Roese09554022005-11-30 13:06:40 +0100392/*
393 * General PCI
394 * Addresses are mapped 1-1.
395 */
396#define CFG_PCI1_MEM_BASE 0x80000000
397#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
398#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
Wolfgang Grandeggerba08f5d2008-06-05 13:12:10 +0200399#define CFG_PCI1_IO_BASE (CFG_CCSRBAR + 0x02000000)
Stefan Roese09554022005-11-30 13:06:40 +0100400#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200401#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
Stefan Roese09554022005-11-30 13:06:40 +0100402
Wolfgang Grandegger8754a972008-06-05 13:12:08 +0200403/* PCI view of System Memory */
404#define CFG_PCI_MEMORY_BUS 0x00000000
405#define CFG_PCI_MEMORY_PHYS 0x00000000
406#define CFG_PCI_MEMORY_SIZE 0x80000000
407
408#ifdef CONFIG_PCIE1
409/*
410 * General PCI express
411 * Addresses are mapped 1-1.
412 */
Wolfgang Grandeggerba08f5d2008-06-05 13:12:10 +0200413#ifdef CONFIG_TQM_BIGFLASH
414#define CFG_PCIE1_MEM_BASE 0xb0000000
415#define CFG_PCIE1_MEM_SIZE 0x10000000 /* 512M */
416#define CFG_PCIE1_IO_BASE 0xaf000000
417#else /* !CONFIG_TQM_BIGFLASH */
Wolfgang Grandegger8754a972008-06-05 13:12:08 +0200418#define CFG_PCIE1_MEM_BASE 0xc0000000
Wolfgang Grandegger8754a972008-06-05 13:12:08 +0200419#define CFG_PCIE1_MEM_SIZE 0x20000000 /* 512M */
420#define CFG_PCIE1_IO_BASE 0xef000000
Wolfgang Grandeggerba08f5d2008-06-05 13:12:10 +0200421#endif /* CONFIG_TQM_BIGFLASH */
422#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE
Wolfgang Grandegger8754a972008-06-05 13:12:08 +0200423#define CFG_PCIE1_IO_PHYS CFG_PCIE1_IO_BASE
424#define CFG_PCIE1_IO_SIZE 0x1000000 /* 16M */
Wolfgang Grandegger8754a972008-06-05 13:12:08 +0200425#endif /* CONFIG_PCIE1 */
426
Stefan Roese09554022005-11-30 13:06:40 +0100427#if defined(CONFIG_PCI)
428
429#define CONFIG_PCI_PNP /* do pci plug-and-play */
430
431#define CONFIG_EEPRO100
432#undef CONFIG_TULIP
433
434#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
435#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
436
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200437#endif /* CONFIG_PCI */
Stefan Roese09554022005-11-30 13:06:40 +0100438
439#define CONFIG_NET_MULTI 1
440
441#define CONFIG_MII 1 /* MII PHY management */
Kim Phillips177e58f2007-05-16 16:52:19 -0500442#define CONFIG_TSEC1 1
443#define CONFIG_TSEC1_NAME "TSEC0"
444#define CONFIG_TSEC2 1
445#define CONFIG_TSEC2_NAME "TSEC1"
Stefan Roese09554022005-11-30 13:06:40 +0100446#define TSEC1_PHY_ADDR 2
447#define TSEC2_PHY_ADDR 1
448#define TSEC1_PHYIDX 0
449#define TSEC2_PHYIDX 0
Andy Fleming09b88df2007-08-15 20:03:25 -0500450#define TSEC1_FLAGS TSEC_GIGABIT
451#define TSEC2_FLAGS TSEC_GIGABIT
Stefan Roese09554022005-11-30 13:06:40 +0100452#define FEC_PHY_ADDR 3
453#define FEC_PHYIDX 0
Andy Fleming09b88df2007-08-15 20:03:25 -0500454#define FEC_FLAGS 0
Andy Fleming458c3892007-08-16 16:35:02 -0500455#define CONFIG_HAS_ETH0
Stefan Roese09554022005-11-30 13:06:40 +0100456#define CONFIG_HAS_ETH1
457#define CONFIG_HAS_ETH2
458
Wolfgang Grandegger328c6ec2008-06-05 13:12:07 +0200459#ifdef CONFIG_TQM8548
460/*
461 * TQM8548 has 4 ethernet ports. 4 ETSEC's.
462 *
463 * On the STK85xx Starterkit the ETSEC3/4 ports are on an
464 * additional adapter (AIO) between module and Starterkit.
465 */
466#define CONFIG_TSEC3 1
467#define CONFIG_TSEC3_NAME "TSEC2"
468#define CONFIG_TSEC4 1
469#define CONFIG_TSEC4_NAME "TSEC3"
470#define TSEC3_PHY_ADDR 4
471#define TSEC4_PHY_ADDR 5
472#define TSEC3_PHYIDX 0
473#define TSEC4_PHYIDX 0
474#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
475#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
476#define CONFIG_HAS_ETH3
477#define CONFIG_HAS_ETH4
478#endif /* CONFIG_TQM8548 */
479
Stefan Roese09554022005-11-30 13:06:40 +0100480/* Options are TSEC[0-1], FEC */
481#define CONFIG_ETHPRIME "TSEC0"
482
483#if defined(CONFIG_TQM8540)
484/*
485 * TQM8540 has 3 ethernet ports. 2 TSEC's and one FEC.
486 * The FEC port is connected on the same signals as the FCC3 port
487 * of the TQM8560 to the baseboard (STK85xx Starterkit).
488 *
489 * On the STK85xx Starterkit the X47/X50 jumper has to be set to
490 * a - d (X50.2 - 3) to enable the FEC port.
491 */
492#define CONFIG_MPC85XX_FEC 1
493#define CONFIG_MPC85XX_FEC_NAME "FEC"
494#endif
495
496#if defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555)
497/*
498 * TQM8541/55 have 4 ethernet ports. 2 TSEC's and 2 FCC's. Only one FCC port
499 * can be used at once, since only one FCC port is available on the STK85xx
500 * Starterkit.
501 *
502 * To use this port you have to configure U-Boot to use the FCC port 1...2
503 * and set the X47/X50 jumper to:
504 * FCC1: a - b (X47.2 - X50.2)
505 * FCC2: a - c (X50.2 - 1)
506 */
507#define CONFIG_ETHER_ON_FCC
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200508#define CONFIG_ETHER_INDEX 1 /* FCC channel for ethernet */
Stefan Roese09554022005-11-30 13:06:40 +0100509#endif
510
511#if defined(CONFIG_TQM8560)
512/*
513 * TQM8560 has 5 ethernet ports. 2 TSEC's and 3 FCC's. Only one FCC port
514 * can be used at once, since only one FCC port is available on the STK85xx
515 * Starterkit.
516 *
517 * To use this port you have to configure U-Boot to use the FCC port 1...3
518 * and set the X47/X50 jumper to:
519 * FCC1: a - b (X47.2 - X50.2)
520 * FCC2: a - c (X50.2 - 1)
521 * FCC3: a - d (X50.2 - 3)
522 */
523#define CONFIG_ETHER_ON_FCC
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200524#define CONFIG_ETHER_INDEX 3 /* FCC channel for ethernet */
Stefan Roese09554022005-11-30 13:06:40 +0100525#endif
526
527#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1)
528#define CONFIG_ETHER_ON_FCC1
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200529#define CFG_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | \
530 CMXFCR_TF1CS_MSK)
Stefan Roese09554022005-11-30 13:06:40 +0100531#define CFG_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK12)
532#define CFG_CPMFCR_RAMTYPE 0
533#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
534#endif
535
536#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
537#define CONFIG_ETHER_ON_FCC2
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200538#define CFG_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | \
539 CMXFCR_TF2CS_MSK)
Stefan Roese09554022005-11-30 13:06:40 +0100540#define CFG_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK16 | CMXFCR_TF2CS_CLK13)
541#define CFG_CPMFCR_RAMTYPE 0
542#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
543#endif
544
545#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3)
546#define CONFIG_ETHER_ON_FCC3
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200547#define CFG_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | \
548 CMXFCR_TF3CS_MSK)
Stefan Roese09554022005-11-30 13:06:40 +0100549#define CFG_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK14)
550#define CFG_CPMFCR_RAMTYPE 0
551#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
552#endif
553
554/*
555 * Environment
556 */
557#define CFG_ENV_IS_IN_FLASH 1
Wolfgang Grandegger383c0ab2008-06-05 13:12:02 +0200558
559#ifdef CONFIG_TQM_FLASH_N_TYPE
560#define CFG_ENV_SECT_SIZE 0x40000 /* 256K (one sector) for env */
561#else /* !CONFIG_TQM_FLASH_N_TYPE */
562#define CFG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) for env */
563#endif /* CONFIG_TQM_FLASH_N_TYPE */
564#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
Stefan Roese09554022005-11-30 13:06:40 +0100565#define CFG_ENV_SIZE 0x2000
Wolfgang Grandegger383c0ab2008-06-05 13:12:02 +0200566#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
Stefan Roese09554022005-11-30 13:06:40 +0100567#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
568
569#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
570#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
571
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200572#define CONFIG_TIMESTAMP /* Print image info with ts */
Jon Loeligere63319f2007-06-13 13:22:08 -0500573
574/*
Jon Loeligerbeb9ff42007-07-10 09:22:23 -0500575 * BOOTP options
576 */
577#define CONFIG_BOOTP_BOOTFILESIZE
578#define CONFIG_BOOTP_BOOTPATH
579#define CONFIG_BOOTP_GATEWAY
580#define CONFIG_BOOTP_HOSTNAME
581
Wolfgang Grandegger2aca6452008-06-05 13:12:09 +0200582#ifdef CONFIG_NAND
583/*
584 * Use NAND-FLash as JFFS2 device
585 */
586#define CONFIG_CMD_NAND
587#define CONFIG_CMD_JFFS2
588
589#define CONFIG_JFFS2_NAND 1
590
591#ifdef CONFIG_JFFS2_CMDLINE
592#define MTDIDS_DEFAULT "nand0=TQM85xx-nand"
593#define MTDPARTS_DEFAULT "mtdparts=TQM85xx-nand:-"
594#else
595#define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */
596#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */
597#define CONFIG_JFFS2_PART_SIZE 0x200000 /* size of jffs2 partition */
598#endif /* CONFIG_JFFS2_CMDLINE */
599
600#endif /* CONFIG_NAND */
601
Jon Loeligerbeb9ff42007-07-10 09:22:23 -0500602/*
Jon Loeligere63319f2007-06-13 13:22:08 -0500603 * Command line configuration.
604 */
605#include <config_cmd_default.h>
606
607#define CONFIG_CMD_PING
608#define CONFIG_CMD_I2C
609#define CONFIG_CMD_DHCP
610#define CONFIG_CMD_NFS
611#define CONFIG_CMD_SNTP
612#define CONFIG_CMD_DATE
613#define CONFIG_CMD_EEPROM
614#define CONFIG_CMD_DTT
615#define CONFIG_CMD_MII
616
Stefan Roese09554022005-11-30 13:06:40 +0100617#if defined(CONFIG_PCI)
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200618#define CONFIG_CMD_PCI
Stefan Roese09554022005-11-30 13:06:40 +0100619#endif
620
Stefan Roese09554022005-11-30 13:06:40 +0100621#undef CONFIG_WATCHDOG /* watchdog disabled */
622
623/*
624 * Miscellaneous configurable options
625 */
626#define CFG_LONGHELP /* undef to save memory */
627#define CFG_LOAD_ADDR 0x2000000 /* default load address */
628#define CFG_PROMPT "=> " /* Monitor Command Prompt */
629
Jon Loeligere63319f2007-06-13 13:22:08 -0500630#if defined(CONFIG_CMD_KGDB)
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200631#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
Stefan Roese09554022005-11-30 13:06:40 +0100632#else
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200633#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
Stefan Roese09554022005-11-30 13:06:40 +0100634#endif
635
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200636#define CFG_PBSIZE (CFG_CBSIZE + \
637 sizeof(CFG_PROMPT) + 16) /* Print Buf Size */
Stefan Roese09554022005-11-30 13:06:40 +0100638#define CFG_MAXARGS 16 /* max number of command args */
639#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
640#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
641
642/*
643 * For booting Linux, the board info and command line data
644 * have to be in the first 8 MB of memory, since this is
645 * the maximum mapped by the Linux kernel during initialization.
646 */
647#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
648
Stefan Roese09554022005-11-30 13:06:40 +0100649/*
650 * Internal Definitions
651 *
652 * Boot Flags
653 */
654#define BOOTFLAG_COLD 0x01 /* Power-On: Boot from FLASH */
655#define BOOTFLAG_WARM 0x02 /* Software reboot */
656
Jon Loeligere63319f2007-06-13 13:22:08 -0500657#if defined(CONFIG_CMD_KGDB)
Stefan Roese09554022005-11-30 13:06:40 +0100658#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/
659#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
660#endif
661
Stefan Roese09554022005-11-30 13:06:40 +0100662#define CONFIG_LOADADDR 200000 /* default addr for tftp & bootm*/
663
664#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
665
666#define CONFIG_PREBOOT "echo;" \
Wolfgang Denk29f05002006-08-11 17:33:42 +0200667 "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
Stefan Roese09554022005-11-30 13:06:40 +0100668 "echo"
669
670#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
671
Wolfgang Grandeggerf5be52d2008-06-05 13:12:06 +0200672
673/*
674 * Setup some board specific values for the default environment variables
675 */
676#ifdef CONFIG_CPM2
677#define CFG_ENV_CONSDEV "consdev=ttyCPM0\0"
678#else
679#define CFG_ENV_CONSDEV "consdev=ttyS0\0"
680#endif
681#define CFG_ENV_FDT_FILE "fdt_file="MK_STR(CONFIG_HOSTNAME)"/" \
682 MK_STR(CONFIG_HOSTNAME)".dtb\0"
683#define CFG_ENV_BOOTFILE "bootfile="MK_STR(CONFIG_HOSTNAME)"/uImage\0"
684#define CFG_ENV_UBOOT "uboot="MK_STR(CONFIG_HOSTNAME)"/u-boot.bin\0" \
685 "uboot_addr="MK_STR(TEXT_BASE)"\0"
686
Stefan Roese09554022005-11-30 13:06:40 +0100687#define CONFIG_EXTRA_ENV_SETTINGS \
Wolfgang Grandeggerf5be52d2008-06-05 13:12:06 +0200688 CFG_ENV_BOOTFILE \
689 CFG_ENV_FDT_FILE \
690 CFG_ENV_CONSDEV \
Stefan Roese09554022005-11-30 13:06:40 +0100691 "netdev=eth0\0" \
Stefan Roese09554022005-11-30 13:06:40 +0100692 "nfsargs=setenv bootargs root=/dev/nfs rw " \
693 "nfsroot=$serverip:$rootpath\0" \
694 "ramargs=setenv bootargs root=/dev/ram rw\0" \
695 "addip=setenv bootargs $bootargs " \
696 "ip=$ipaddr:$serverip:$gatewayip:$netmask" \
697 ":$hostname:$netdev:off panic=1\0" \
698 "addcons=setenv bootargs $bootargs " \
699 "console=$consdev,$baudrate\0" \
700 "flash_nfs=run nfsargs addip addcons;" \
Wolfgang Grandeggerf5be52d2008-06-05 13:12:06 +0200701 "bootm $kernel_addr - $fdt_addr\0" \
Stefan Roese09554022005-11-30 13:06:40 +0100702 "flash_self=run ramargs addip addcons;" \
Wolfgang Grandeggerf5be52d2008-06-05 13:12:06 +0200703 "bootm $kernel_addr $ramdisk_addr $fdt_addr\0" \
704 "net_nfs=tftp $kernel_addr_r $bootfile;" \
705 "tftp $fdt_addr_r $fdt_file;" \
706 "run nfsargs addip addcons;" \
707 "bootm $kernel_addr_r - $fdt_addr_r\0" \
Stefan Roese09554022005-11-30 13:06:40 +0100708 "rootpath=/opt/eldk/ppc_85xx\0" \
Wolfgang Grandeggerf5be52d2008-06-05 13:12:06 +0200709 "fdt_addr_r=900000\0" \
710 "kernel_addr_r=1000000\0" \
711 "fdt_addr=ffec0000\0" \
712 "kernel_addr=ffd00000\0" \
713 "ramdisk_addr=ff800000\0" \
714 CFG_ENV_UBOOT \
715 "load=tftp 100000 $uboot\0" \
716 "update=protect off $uboot_addr +$filesize;" \
717 "erase $uboot_addr +$filesize;" \
718 "cp.b 100000 $uboot_addr $filesize;" \
Stefan Roese09554022005-11-30 13:06:40 +0100719 "setenv filesize;saveenv\0" \
Detlev Zundel406e5782008-03-06 16:45:53 +0100720 "upd=run load update\0" \
Stefan Roese09554022005-11-30 13:06:40 +0100721 ""
722#define CONFIG_BOOTCOMMAND "run flash_self"
723
Wolfgang Grandegger9039ce12008-06-05 13:12:00 +0200724#endif /* __CONFIG_H */